The atom that is positively polarized (electron-poor) is hydrogen (H).
In a polar covalent bond, one of the atoms tends to attract the shared electrons more strongly than the other. As a result, this atom gains a partial negative charge and the other atom gains a partial positive charge. We can determine which atom is partially negative and which atom is partially positive by comparing their electronegativities. The hydrogen-oxygen bond in water is an example of a polar covalent bond. Oxygen has a higher electronegativity than hydrogen, which means it attracts the shared electrons more strongly. As a result, the oxygen atom becomes partially negative and the hydrogen atoms become partially positive.
Therefore, hydrogen is the atom that is positively polarized (electron-poor).
Learn more about atoms at https://brainly.com/question/17545314
#SPJ11
suppose that you know the position of a 100-gram pebble to within the width of an atomic nucleus ( δx=10−15δx=10−15 meters). what is the minimum uncertainty in the momentum of the pebble?
given values:Δx = 10⁻¹⁵ m, h = 6.63 × 10⁻³⁴ J·sΔp ≥ (6.63 × 10⁻³⁴ J·s) / (2π × 10⁻¹⁵ m)Δp ≥ 1.05 × 10⁻¹⁸ kg· m/s So, the minimum uncertainty in the momentum of the pebble is 1.05 × 10⁻¹⁸ kg· m/s.
Δp >= 1.054 × 10^(-19) J·s·m^(-1) × 0.1 kg = 1.054 × 10^(-20) kg·m·s^(-1)Therefore, the minimum uncertainty in the momentum of the pebble is approximately 1.054 × 10^(-20) kg·m·s^(-1).++The uncertainty principle of Heisenberg states that there is a limit to how precisely you can know the position and momentum of a particle simultaneously. The more precisely you measure one quantity, the less precisely you can measure the other. This limit is given by the following equation:ΔxΔp ≥ h/2πwhere Δx and Δp represent the uncertainties in the position and momentum of the particle, respectively, and h is Planck's constant. Thus, we can rearrange this equation to solve for Δp:Δp ≥ h/2πΔx given values:Δx = 10⁻¹⁵ m, h = 6.63 × 10⁻³⁴ J·sΔp ≥ (6.63 × 10⁻³⁴ J·s) / (2π × 10⁻¹⁵ m)Δp ≥ 1.05 × 10⁻¹⁸ kg· m/s So, the minimum uncertainty in the momentum of the pebble is 1.05 × 10⁻¹⁸ kg· m/s.Δp >= (1.054 × 10^(-34) J·s) / (10^(-15) meters)
to know more about momentum, visit
https://brainly.com/question/1042017
#SPJ11
the magnetic field of an electromagnetic wave is given by (,)=(0.70 μt)sin[(9.00×106 m−1)−(2.70×1015 s−1)] calculate the amplitude 0 of the electric field.
The electromagnetic wave consists of an electric field and a magnetic field, both of which are perpendicular to each other. When an electromagnetic wave is propagated in a vacuum or air, the electric and magnetic fields are both perpendicular to the direction of propagation.
They are also both perpendicular to each other, so the electric field oscillates in a plane that is perpendicular to the plane in which the magnetic field oscillates. Hence, this wave is said to be transverse. If the wave is allowed to propagate in a conductor, the electric field will induce a current in the conductor, causing the energy of the wave to be absorbed by the conductor. The amplitude of the electric field is given as;E=B*Cwhere;E is the electric fieldB is the magnetic fieldC is the speed of lightTherefore;E= (0.70μT) * (3.00 × 10^8 m/s)= 210 × 10^4 V/m= 2.10 × 10^5 V/mTherefore, the amplitude of the electric field is 2.10 × 10^5 V/m.Note: The equation for the magnetic field was given as B = 0.70μT*sin[(9.00×106 m−1)−(2.70×1015 s−1)], where μT represents the magnetic flux density in Tesla.
For more information on electromagnetic wave visit:
brainly.com/question/29774932
#SPJ11
select the terms that describe the possible configurations of viral nucleic acids.
The possible configurations of viral nucleic acids are linear, circular, and segmented.
Nucleic acids are biopolymers that are essential for all forms of life. They are made up of monomers known as nucleotides. DNA and RNA are two examples of nucleic acids. They are responsible for transmitting genetic information from one generation to the next in organisms.
Linear configuration - Linear is one of the possible configurations of viral nucleic acids. Viral nucleic acids can be arranged in a linear fashion, with the genetic material arranged in a straight line. Most of the viral genomes of this type are present in a single, long piece of genetic material, similar to a continuous segment of DNA or RNA.
Circular configuration - Another possible configuration of viral nucleic acids is circular. A viral genome is arranged in a circular fashion in the viral nucleic acid. Many bacterial and phage genomes have circular structure, which is also found in many viruses.
Segmented configuration - Segmented is a third possible configuration of viral nucleic acids. A viral genome is made up of several separate pieces of genetic material that are not joined together in a segmented configuration. This type of viral genome is found in a few viruses and is less common than the other two types of configuration.
Learn more about nucleic acids at https://brainly.com/question/16986563
#SPJ11
Fluorine reacts with zinc chloride. Give the full and half reactions.
The reaction between fluorine (F₂) and zinc chloride (ZnCl₂) can be represented by the following full and half-reactions:
Full reaction:
F₂ + ZnCl₂ → 2FCl + Zn
Half reactions:
Oxidation half-reaction: F₂ → 2F⁻ + 2e⁻
Reduction half-reaction: Zn²⁺ + 2e⁻ → Zn
In the oxidation half-reaction, fluorine (F₂) is oxidized and loses two electrons to form two fluoride ions (F⁻). In the reduction half-reaction, zinc chloride (ZnCl₂) is reduced as the zinc ion (Zn²⁺) gains two electrons to form zinc metal (Zn).
When the two half-reactions are combined, the electrons cancel out, resulting in the overall reaction:
2F₂ + ZnCl₂ → 2FCl + Zn
Therefore, the reaction represents the combination of fluorine and zinc chloride to form fluorine chloride and zinc.
For more details regarding full and half-reactions, visit:
https://brainly.com/question/29182653
#SPJ1
15. The medicine in the diagram above has molecules that are moving around each
other. The doctor needs to slow down the molecules enough to cause a phase
change. How will she do this, and how will this affect the medicine?
She transfers energy...
into the medicine until it is a liquid.
into the medicine until it is a gas.
out of the medicine until it is a solid.
out of the mèdicine until it is a liquid.
To slow down the molecules of the medicine and cause a phase change, the doctor needs to transfer energy out of the medicine until it is a solid.
She would expel energy from the medication until it solidified in order to accomplish this. The kinetic energy of the molecules is reduced by removing energy from the medication, usually by cooling or freezing. A phase transition from a liquid to a solid state is caused by this decrease in molecular mobility.
Compared to the more mobile molecules in the liquid phase, the slower-moving molecules in the solid phase will have less mobility to manoeuvre around one another. With the use of this procedure, the doctor is able to regulate the medication's physical state for a number of uses, including patient administration, storage, and preservation.
Learn more about phase transition, here:
https://brainly.com/question/29795670
#SPJ1
the best description of the shape of a boron trifluoride (bf3) molecule is
The best description of the shape of a boron trifluoride (BF3) molecule is trigonal planar.
BF3 is an inorganic compound with the formula BF3. It is a nonpolar molecule, which implies that it has no net dipole moment.
The boron atom in BF3 has three valence electrons and three bonding electron pairs.
The molecule has a flat triangular shape with the boron atom at the center of the triangle.
BF3 is an example of a molecule with a trigonal planar shape.
Trigonal planar is a molecular geometry term that describes the shape of molecules with three atoms in a flat triangular arrangement and no lone pairs on the central atom.
In this case, boron (B) is the central atom in the molecule, with three fluorine (F) atoms bonded to it.
The trigonal planar molecular geometry is determined by the VSEPR (Valence Shell Electron Pair Repulsion) theory.
The VSEPR theory states that the molecular shape is determined by the electrostatic repulsion between the bonding and nonbonding electron pairs in the valence shell of the central atom.
In BF3, the three bonding pairs of electrons around the central boron atom are arranged as far apart as possible in a plane, giving the molecule a trigonal planar shape.
So, the best description of the shape of a boron trifluoride (BF3) molecule is trigonal planar.
Learn more about trigonal planar at: https://brainly.com/question/22697472
#SPJ11
the dynamic behavior of a temperature sensor/transmitter can be modeled as a first-order transfer function (in deviation variables) that relates the measured value ! to the actual temperature :
The dynamic behavior of a temperature sensor/transmitter can be modeled as a first-order transfer function (in deviation variables) that relates the measured value to the actual temperature. The time constant of this transfer function describes the response of the sensor/transmitter to a step change in temperature.
A temperature sensor is an instrument that senses temperature and converts it to an electrical signal. This electrical signal can then control a system or monitor a process. The dynamic behavior of a temperature sensor/transmitter is an important characteristic that must be understood in order to accurately control or monitor a process. The dynamic behavior of a temperature sensor/transmitter can be modeled as a first-order transfer function (in deviation variables) that relates the measured value to the actual temperature. The transfer function can be represented by the following equation:()=1+1Where: T(s) = transfer function = system gainT1 = time constantThe time constant T1 of the transfer function describes the response of the sensor/transmitter to a step change in temperature. A considerable time constant indicates a slow response, while a small-time consistent indicates a fast response. The time constant is a function of the physical properties of the sensor/transmitter and can be measured experimentally. In summary, the dynamic behavior of a temperature sensor/transmitter can be modeled using a first-order transfer function, with the time constant of the transfer function describing the response of the sensor/transmitter to a step change in temperature.
To Know more about electrical signals visit:
brainly.com/question/11931240
#SPJ11
if the required return is greater than the coupon rate, a bond will sell at ________.
If the required return is greater than the coupon rate, a bond will sell at a discount. A bond is a debt instrument that is traded on the market. It can be bought or sold by investors. Bonds are issued by companies, governments, and other organizations as a way to raise money for various purposes. The bond issuer pays interest on the bond's principal at a fixed or variable rate.
The bond's coupon rate is the interest rate paid on the bond. The required return is the minimum rate of return that investors demand from the bond. When the required return is greater than the coupon rate, the bond will sell at a discount. The bond price will fall below the face value of the bond. To put it another way, when the required return is greater than the bond's coupon rate, it indicates that the bond's price has dropped. The bond's price falls because the market perceives the bond to be less valuable due to a higher required return. As a result, investors will only purchase the bond if it is available at a lower price (at a discount) that provides a higher return to meet the required return.
To Know more about Bond visit:
brainly.com/question/31994049
#SPJ11
Complete and balance the following redox equation. what is the coefficient for mno4- when the following redox equation is balanced in acidic solution using the smallest whole number coefficient.
MnO4- + SO3^2- arrow Mn^2+ + SO4^2-
The smallest whole number coefficient is 1. So, the coefficient for $\ce{MnO_4^-}$ when the given redox equation is balanced in acidic solution using the smallest whole number coefficient is 1.
The given redox equation is:$$\ce{MnO_4^- + SO_3^2- -> Mn^2+ + SO_4^2-}$$To balance this equation, let's consider the oxidation number of each element: Oxidation number of Mn in MnO4- = +7Oxidation number of Mn in Mn2+ = +2Oxidation number of S in SO32- = +4Oxidation number of S in SO42- = +6The oxidation number of Mn decreases from +7 to +2. Therefore, it is reduced.
The oxidation number of S increases from +4 to +6. Therefore, it is oxidized. The balanced half-reactions are: Reduction: $$\ce{MnO_4^- + 8 H+ + 5e^- -> Mn^2+ + 4 H_2O}$$Oxidation: $$\ce{SO_3^2- -> SO_4^2- + 2e^-}$$
To balance the number of electrons, we multiply the oxidation half-reaction by 5:$$\ {5 SO_3^2- -> 5 SO_4^2- + 10e^-}$$Now, we can combine the two half-reactions:$$\ce{MnO_4^- + 8 H+ + 5 SO_3^2- -> Mn^2+ + 5 SO_4^2- + 4 H_2O}$$The coefficient of $\{MnO_4^-}$ is 1. Therefore,
the smallest whole number coefficient is 1. So, the coefficient for $\ce{MnO_4^-}$ when the given redox equation is balanced in acidic solution using the smallest whole number coefficient is 1.
to know more about coefficient visit :
https://brainly.com/question/1594145
#SPJ11
Which of the following isotopes is predicted* to be unstable? A. sodium-21 B. calcium-40 C. iodine-127
Based on the given isotopes, sodium-21 (Na-21) is predicted to be unstable. Isotopes are variants of a particular chemical element that differ in the number of neutrons they contain.
Stability in isotopes is determined by the balance of protons and neutrons in their nucleus. An isotope is considered stable if its nucleus does not undergo radioactive decay, while unstable isotopes are radioactive and decay over time.
Calcium-40 (Ca-40) and iodine-127 (I-127) are stable isotopes, as their neutron to proton ratios are within the range that ensures stability. Calcium has 20 protons and 20 neutrons, while iodine has 53 protons and 74 neutrons. These ratios allow their nuclei to remain stable without undergoing radioactive decay.
On the other hand, sodium-21 (Na-21) has 11 protons and 10 neutrons, which leads to an imbalance in its nucleus. This imbalance causes the nucleus to be unstable and undergo radioactive decay, releasing energy in the process. Consequently, sodium-21 is considered to be an unstable isotope among the given options.
Learn more about Isotopes here:
https://brainly.com/question/28039996
#SPJ11
what is the classification of this bone according to its shape?
Bones can be classified based on their shape. There are five classifications of bone based on shape. These categories are as follows: long bones, short bones, flat bones, irregular bones, and sesamoid bones.
In order to determine the classification of a bone, we need to identify its shape. Therefore, we cannot determine the classification of a bone unless we know its shape. The shape of a bone is important because it can tell us a lot about its function. For example, long bones are found in the limbs and are responsible for providing support and leverage. Short bones are found in the hands and feet and are responsible for providing stability and support. Flat bones are found in the skull and are responsible for protecting the brain. Irregular bones are found in the spine and are responsible for providing support and flexibility. Sesamoid bones are found in the knees and are responsible for protecting the tendons.
Learn more about bones at https://brainly.com/question/23220780
#SPJ11
Which bond types are involved in forming the bond between these two carbon atoms?
-C=C- two o bonds and one r bond three y bonds
one o bond and two it bonds three o bonds three anti-bonds
The bond between the two carbon atoms in -C=C- involves a type of bond called a double bond.
A double bond is composed of one sigma bond and one pi bond. The sigma bond is formed by the overlap of two hybridized orbitals, while the pi bond is formed by the overlap of two unhybridized p orbitals.
In this case, the double bond consists of one sigma bond and one pi bond. There are no anti-bonds involved in the formation of this bond.
To know more about chemical visit :-
https://brainly.com/question/29886197
#SPJ11
use bond energies to determine δhrxn for the following reaction. ch4(g)+clf(g)→ch3cl(g)+hf(g)
The value of the standard enthalpy change of reaction ΔHrxn = +303 kJ/mol is positive.
The bond energy is defined as the energy required to break one mole of a specific bond in a gaseous substance at standard temperature and pressure (STP) into its constituent atoms.
The bond energy is frequently utilized in thermochemistry to determine the enthalpy change of a reaction.
In this reaction, we must determine the standard enthalpy change of reaction, ΔHrxn, using bond energy values.
We must first draw out the balanced equation for this reaction.
CH4(g) + ClF(g) → CH3Cl(g) + HF(g)
To calculate the change in enthalpy of a reaction using bond energies, the total energy absorbed to break the bonds of the reactants minus the total energy released to create the bonds of the products should be considered.
The energy absorbed to break the bonds of the reactants:
4 C–H bonds x 413 kJ/mol = 1652 kJ/mol
1 C–F bond x 553 kJ/mol = 553 kJ/mol
1 Cl–F bond x 243 kJ/mol = 243 kJ/mol
Total energy absorbed = 2448 kJ/mol
The energy released to create the bonds of the products:
3 C–H bonds x 413 kJ/mol = 1239 kJ/mol
1 C–Cl bond x 338 kJ/mol = 338 kJ/mol
1 H–F bond x 568 kJ/mol = 568 kJ/mol
Total energy released = 2145 kJ/mol
ΔHrxn = Total energy absorbed - Total energy released
= 2448 kJ/mol - 2145 kJ/mol
= +303 kJ/mol
The value of the standard enthalpy change of reaction ΔHrxn = +303 kJ/mol is positive.
This implies that the reaction is endothermic, and it absorbs 303 kJ of heat for every mole of CH4(g) reacted.
Learn more about enthalpy change at: https://brainly.com/question/14047927
#SPJ11
how many grams of solute are in 360 ml of 2.11 m al(no3)3 solution?
Answer: there are 161.64 grams of Al(NO₃)₃ solute in 360 mL of a 2.11 M solution.
Explanation:
To determine the grams of solute in a solution, we need to use the equation:
Grams of solute = Molarity * Volume * Formula weight
Given:
Molarity (M) = 2.11 M
Volume (V) = 360 mL = 360 cm³
Formula weight of Al(NO₃)₃ = 213.0 g/mol
Now let's calculate the grams of solute:
Grams of solute = 2.11 M * 360 cm³ * 213.0 g/mol
First, we need to convert the volume from cm³ to liters:
360 cm³ = 360 mL = 0.360 L
Grams of solute = 2.11 M * 0.360 L * 213.0 g/mol
Grams of solute = 161.64 g
The number of grams of solute present in 360 mL of 2.11 M Al(NO3)3 solution is 162295.6 g. To find the number of grams of solute present in 360 mL of 2.11 M Al(NO3)3 solution, we will use the formula : Mass of solute = Molarity × Volume of solution × Molar mass of solute
It is given that the volume of the solution is 360 mL, and the molarity of the solution is 2.11 M. The molar mass of Al(NO₃)₃ can be calculated as follows:
Molar mass of Al(NO₃)₃ = Atomic mass of Al + Atomic mass of N × 3 + Atomic mass of O × 9
Molar mass of Al(NO₃)₃ = 27 + 14 × 3 + 16 × 9
Molar mass of Al(NO₃)₃ = 27 + 42 + 144
Molar mass of Al(NO₃)₃ = 213 g/mol
Substituting the values in the formula: Mass of solute = 2.11 × 360 × 213
Mass of solute = 162295.6 g
Therefore, the number of grams of solute present in 360 mL of 2.11 M Al(NO₃)₃ solution is 162295.6 g.
To know more about solute, refer
https://brainly.com/question/30401633
#SPJ11
Benzene has a heat of vaporization of 30.72 kJ/mol and a normal boiling point of 80.1°C. At what temperature does benzene boil when the external pressure is 405 torr?
A 251.9 K
B 720.7 K
C 924.2 K
D 333.2 K
Benzene will boil at 333.2 K temperature when the external pressure is 405 torr.The correct option d.
Heat of vaporization (ΔHvap) of benzene, ∆Hvap = 30.72 kJ/mol.Normal boiling point of benzene, Tbp = 80.1°C.External pressure of benzene, P = 405 torr.
The formula for boiling point is given as follows:BP = [(ΔHvap / R) * ln(Po / P)] + Tbp,
where R is the gas constant and Po is the normal atmospheric pressure.As we can see, we have everything except the boiling point.
So, we can rearrange the above formula to solve for BP as follows:BP = [(ΔHvap / R) * ln(Po / P)] + Tbp. = [(30.72 × 10³ J/mol) / (8.314 J/(mol·K)) × ln(760 torr / 405 torr)] + 80.1°C= (30.72 × 10³ / 8.314 × ln (1.8765)) + 80.1°C= 353.2 K.
Therefore, the answer is D) 333.2 K.
Benzene will boil at 333.2 K temperature when the external pressure is 405 torr.
To know more about Heat of vaporization visit:
brainly.com/question/31493083
#SPJ11
When 0.105 mol propane, C3H8 is burned in an excess of oxygen, how many moles of oxygen are consumed?
The balanced chemical equation of the combustion of propane (C3H8) in the presence of excess oxygen (O2) is given as follows:
$$C_3H_8 + 5O_2 \to 3CO_2 + 4H_2O$$It can be observed from the balanced equation that 1 mole of propane reacts with 5 moles of oxygen. Hence, if 0.105 mol of propane reacts with excess oxygen, then the moles of oxygen consumed will be:$$\begin{aligned} \text{Moles of Oxygen consumed} &= \text{Moles of Propane} \times \frac{\text{Moles of Oxygen}}{\text{Moles of Propane}} \\ &= 0.105\text{ mol} \times \frac{5\text{ mol}}{1\text{ mol}} \\ &= \boxed{0.525}\text{ mol} \end{aligned}$$Therefore, 0.525 moles of oxygen will be consumed in the combustion of 0.105 mol propane in an excess of oxygen.
To know more about chemical equation , visit ;
https://brainly.com/question/11231920
#SPJ11
COOH Isotretinoin Isotretinoin is a medication used for the treatment of severe acne. How many different isomers arising from double-bond isomerizations are possible?
There are two possible isomers of Isotretinoin arising from double-bond isomerizations.
Isotretinoin (C20H28O2) has one double bond in its structure.
The isomerization of the double bond can lead to the formation of geometric isomers, specifically cis and trans isomers. The double bond restricts rotation, which allows for the two distinct arrangements of the atoms around the double bond. In the case of Isotretinoin, there are two different possible arrangements:
1. cis-Isotretinoin: In this isomer, both COOH groups are on the same side of the double bond.
2. trans-Isotretinoin: In this isomer, the COOH groups are on opposite sides of the double bond.
Considering the double-bond isomerization, there are two possible isomers of Isotretinoin: cis-Isotretinoin and trans-Isotretinoin.
For more information on isomerization kindly visit to
https://brainly.com/question/13200023
#SPJ11
what types of particles can participate in dispersion forces?
The particles which take part in dispersion forces are molecules, whether polar and non-polar.
Dispersion forces is the temporary attractive force due to formation of temporary dipoles in a non-polar molecules. Dispersion forces also called vander waals forces.
London dispersion forces can explain how liquid and solids form in molecules with no permanent dipole moment. Dispersion means the way things are distributed or spread out. London dispersion forces are result of electron correlation.
In light atoms, they are very small because there were not much electrons, so due to high nuclear charge, they are tightly held. In large atoms, they are very big, because the atoms are large and easy to polarize.
A dipole in an atom is caused when there is an unequal distribution of electrons near the nucleus. When induced dipole comes in contact with an atom or molecule, electrostatic attraction occurs due to distortion between atoms or molecules.
To know more about dispersion forces,
https://brainly.com/question/30899061
Answer:
What types of particles can participate in dispersion forces?-molecules with a formal dipole-nonpolar molecules-formally charged particles-any particles.
draw the lewis structure for ch3br and then determine the following:
The Lewis structure for CH3Br is shown below: 1. The type of hybridization around each carbon atom is sp3.2. The type of hybridization around the Br atom is sp3.3. The bond angle around each carbon atom is 109.5°.4. The bond length between the carbon and hydrogen atoms is 1.09 Å.5. The bond length between the carbon and bromine atoms is 1.94 Å.6. The molecule is polar due to the difference in electronegativity between the carbon and bromine atoms.
The Lewis structure of CH3Br consists of a central carbon atom bonded to three hydrogen atoms and one bromine atom, with the carbon atom forming a single bond with the bromine atom and possessing two lone pairs of electrons. All atoms in the structure have achieved an octet configuration, except for hydrogen, which follows the duet rule. This structure provides insight into CH3Br's chemical behavior and reactivity.
To know more about hybridization Visit:
https://brainly.com/question/29020053
#SPJ11
Household bleach is an excellent disinfectant for killing the virus. As per the label on the container, Household bleach contains 6.0% w/w of NaOC), sodium hypochlorite, or 60.0 grams NaOCl per 1000 grams of solution. The density of the bleach solution is 1.10 grams/ml, or 1100 grams solution per 1 liter solution. The molecular weight of NaOCl is 74.45 grams/mole What is the molarity of household bleach in moles/liter of NaOCI? Set up the following equation Molarity =% NaOcl * 10 * density Molecular Weight 10 is needed because % w/w is for 100 gram solution and we are dealing with 1000 grams of solution a) 0.0886 M b) 0.7445 M c) 0.886 M d) 0.806 M
Answer:The correct answer is (a) 0.0886 M.
Explanation:
To calculate the molarity of household bleach in moles per liter of NaOCl, we can use the given equation:
Molarity = (% NaOCl * 10 * density) / Molecular Weight
Let's substitute the given values into the equation:
% NaOCl = 6.0% = 0.06 (decimal form)
Density = 1.10 g/mL = 1100 g/L
Molecular Weight of NaOCl = 74.45 g/mol
Molarity = (0.06 * 10 * 1100) / 74.45
Molarity = 0.0886 M
Therefore, the molarity of household bleach in moles per liter of NaOCl is 0.0886 M.
The molarity of household bleach in moles per liter of NaOCl is 0.886 M.
To calculate the molarity of household bleach in moles per liter of NaOCl, we can use the formula:
Molarity = (% NaOCl * 10 * density) / Molecular Weight
Given that household bleach contains 6.0% w/w of NaOCl, the percentage is 0.06. The density of the bleach solution is 1.10 grams/ml, or 1100 grams per liter. The molecular weight of NaOCl is 74.45 grams/mole.
Plugging these values into the formula, we have:
Molarity = (0.06 * 10 * 1100) / 74.45
Simplifying the expression, we get:
Molarity = 0.886
Therefore, the molarity of household bleach in moles per liter of NaOCl is 0.886 M.
So, the correct answer is c) 0.886 M.
Know more about Molarity here:
https://brainly.com/question/31545539
#SPJ11
what is the ph of a solution prepared by dissolving 100mg strontium hydroxide in enough water to mke 10.00ml of solution
To determine the pH of a solution prepared from strontium hydroxide, we need to consider its dissociation in water. we can calculate the pOH and pH of the solution: pOH = -log10 (Concentration of OH-) pH = 14 - pOH.
Since Sr(OH)2 is a strong base, the concentration of hydroxide ions (OH-) can be determined from the number of moles of strontium hydroxide dissolved in the solution. First, let's calculate the number of moles of Sr(OH)2: Mass of Sr(OH)2 = 100 mg = 0.100 g. Molar mass of Sr(OH)2 = 120.63 g/mol. Number of moles of Sr(OH)2 = 0.100 g / 120.63 g/mol. Next, let's calculate the concentration of hydroxide ions (OH-): Since Sr(OH)2 dissociates into two hydroxide ions, the concentration of OH- will be twice the concentration of Sr(OH)2. Concentration of Sr(OH)2 = (moles of Sr(OH)2) / (volume of solution in liters). Since the volume of the solution is given as 10.00 ml (or 0.01000 L), we can calculate the concentration of Sr(OH)2: Concentration of Sr(OH)2 = (0.100 g / 120.63 g/mol) / 0.01000 L. The concentration of hydroxide ions (OH-) is then twice the concentration of Sr(OH)2: Concentration of OH- = 2 * (Concentration of Sr(OH)2) Finally, we can calculate the pOH and pH of the solution: pOH = -log10 (Concentration of OH-) pH = 14 - pOH. By plugging in the values, we can calculate the pH of the solution.
To learn more about solution:
https://brainly.com/question/16994712
#SPJ11
which set of three quantum numbers does not specify an orbital in the hydrogen atom? n=2 ; l=0 ; ml=0 n=2 ; l=1 ; ml=1 n=3 ; l=3 ; ml=−2 n=3 ; l=1 ; ml=−1
The set of three quantum numbers that does not specify an orbital in the hydrogen atom is: n = 3, l = 3, ml = -2.
In quantum mechanics, three quantum numbers can be used to describe the exact state of an electron in an atom. These quantum numbers are as follows:
Principal quantum number (n)Azimuthal quantum number (l)Magnetic quantum number (ml)The value of n specifies the shell and energy of the electron. It can only be a positive integer, including zero. It is used to calculate the energy of the electron and its distance from the nucleus.
l values are determined by the value of n and can range from 0 to (n-1). The subshell is specified by the value of l and is related to the angular momentum of the electron. ml determines the orientation of the orbital in space and its value ranges from -l to l. It is related to the magnetic moment of the electron.
The set of quantum numbers (n = 3, l = 3, ml = -2) is not possible because the maximum value of l in an atom is (n-1). It means that when n = 3, the maximum value of l is 2. Therefore, the set of quantum numbers (n = 3, l = 3, ml = -2) does not specify an orbital in the hydrogen atom.
The set of three quantum numbers that does not specify an orbital in the hydrogen atom is: n = 3, l = 3, ml = -2.
The maximum value of l in an atom is (n-1). It means that when n = 3, the maximum value of l is 2. Therefore, the set of quantum numbers (n = 3, l = 3, ml = -2) does not specify an orbital in the hydrogen atom.
For more information on quantum number kindly visit to
https://brainly.com/question/30465725
#SPJ11
atoms in one molecule of trinitrotoluene (tnt), ch3c6h2(no2)3
The formula of trinitrotoluene (TNT) is C₇H₅N₃O₆. TNT has 24 atoms in one molecule.
Let us learn how to calculate the number of atoms in a molecule.
The number of atoms in a molecule can be calculated by counting the total number of atoms in its chemical formula. It is crucial to know that each element in a formula represents one atom. The total number of atoms in a molecule is the sum of atoms of all the elements in the molecule's chemical formula.
Let us calculate the number of atoms in trinitrotoluene (TNT):
We have C₇H₅N₃O₆ as the chemical formula. 7 carbon atoms, 5 hydrogen atoms, 3 nitrogen atoms, and 6 oxygen atoms are present in a molecule of TNT. Therefore, the total number of atoms in TNT = 7 + 5 + 3 + 6 = 21 + 3 = 24.
The atoms present in one molecule of TNT are 24.
The correct question is:
Atoms in one molecule of trinitrotoluene (TNT), C₇H₅N₃O₆
Learn more about trinitrotoluene at https://brainly.com/question/30364173
#SPJ11
a reaction has a standard free‑energy change of −15.60 kj mol−1(−3.728 kcal mol−1). calculate the equilibrium constant for the reaction at 25 °c.
The change in standard free energy, ΔG°, is used to calculate the equilibrium constant (K) for the reaction. The relationship between ΔG° and K is given by the following equation:
ΔG° = -RT lnKwhere R is the gas constant and T is the temperature in kelvin.
To determine K at a temperature of 25°C (298 K), we'll first convert the free energy change to joules per mole:ΔG° = -15.60 kJ mol⁻¹ = -15,600 J mol⁻¹
Next, we'll use the equationΔG° = -RT lnKto calculate K:lnK = ΔG°/(-RT)lnK = (-15,600 J mol⁻¹)/(-8.314 J K⁻¹ mol⁻¹ x 298 K)lnK = 20.515K = e^(20.515)K = 1.43 x 10^8
Therefore, the equilibrium constant for the reaction at 25°C is 1.43 x 10^8.
To know more about equilibrium constant visit:
https://brainly.com/question/3159758
#SPJ11
Which statement best describes what happens when an excited gas emits light? emission is caused by electrons jumping between fixed energy levels and so only certain colors are emitted O emission is caused by electrons jumping between fixed energy levels and so all colors are emitted an excited gas behaves like a heated solid so a rainbow of all colors is emitted electrons jump from orbits close to the nucleus to ones far away so only certain colors are emitted electrons jump from orbits close to the nucleus to ones far away so all colors are emitted
The statement that best describes what happens when an excited gas emits light is:
Emission is caused by electrons jumping between fixed energy levels, and so only certain colors are emitted.
When electrons in an excited gas return to lower energy levels, they emit photons of specific energies corresponding to the energy difference between the levels. These specific energies correspond to specific colors or wavelengths of light. Therefore, the emitted light consists of only certain colors, not a continuous range of colors. This phenomenon gives rise to the characteristic emission spectra observed for different elements and compounds.
what is electrons?
Electrons are subatomic particles that are fundamental to the field of chemistry. They have a negative charge (-1) and a mass that is approximately 1/1836th the mass of a proton or neutron. Electrons are located outside the nucleus of an atom and occupy energy levels or orbitals surrounding the nucleus.
In chemistry, electrons play a crucial role in determining the chemical properties and behavior of atoms and molecules. Some important aspects of electrons in chemistry include:
1. Electron configuration: The arrangement of electrons in energy levels or orbitals around the nucleus is known as the electron configuration. It determines the stability and reactivity of an atom.
2. Chemical bonding: Electrons participate in chemical bonding, which is the process of sharing or transferring electrons between atoms to form compounds. Covalent bonds involve the sharing of electrons, while ionic bonds involve the transfer of electrons.
3. Valence electrons: Valence electrons are the electrons present in the outermost energy level of an atom. They are responsible for the atom's bonding behavior and chemical reactivity.
4. Redox reactions: Electrons are involved in oxidation-reduction (redox) reactions, which involve the transfer of electrons between species. Oxidation refers to the loss of electrons, while reduction refers to the gain of electrons.
5. Electron movement: Electrons can move between energy levels or orbitals through processes such as absorption or emission of energy in the form of photons.
To know more about electrons visit:
brainly.com/question/9399236
#SPJ11
calculate the enthalpy of combustion of ethylene c2h4 at 25 degrees celsius
The enthalpy of combustion of ethylene C₂H₄ at 25 degrees Celsius is -734.5 kJ/mol.
The enthalpy of combustion of ethylene C₂H₄ at 25 degrees Celsius can be calculated by using the heat of formation data. The balanced chemical equation for the combustion of ethylene is C₂H₄(g) + 3O₂(g) → 2CO₂(g) + 2H₂O(g).
The heat of formation of C₂H₄(g), CO₂(g), and H₂O(g) at standard conditions are given as -52.5 kJ/mol, -393.5 kJ/mol, and -285.8 kJ/mol respectively.
The enthalpy of combustion of ethylene can be calculated as follows:
Enthalpy of reaction = ∑[∆Hf(products)] - ∑[∆Hf(reactants)]
Enthalpy of reaction = {[2 × ∆Hf(CO₂)] + [2 × ∆Hf(H₂O)]} - ∆Hf(C₂H₄)
Enthalpy of reaction = {[2 × (-393.5 kJ/mol)] + [2 × (-285.8 kJ/mol)]} - [-52.5 kJ/mol]
Enthalpy of reaction = [-787 kJ/mol] - [-52.5 kJ/mol]
Enthalpy of reaction = -734.5 kJ/mol
Therefore, the enthalpy of combustion of ethylene C₂H₄ at 25 degrees Celsius is -734.5 kJ/mol.
Learn more about combustion at https://brainly.com/question/10458605
#SPJ11
secondary alcohols are oxidized to group of answer choices aldehydes. esters. ethers. carboxylic acids. ketones.
Secondary alcohols are oxidized to ketones. Option D
What are the secondary alcohols?
Due to the nature of the chemical processes involved in the oxidation process, secondary alcohols are converted to ketones.
The elimination of two hydrogen atoms during oxidation causes the alcohol functional group (-OH) to change into a carbonyl group (C=O). The carbon atom with the -OH group attached becomes a secondary carbon center when it is connected to two more carbon atoms in secondary alcohols.
Learn more about secondary alcohols:https://brainly.com/question/29074176
#SPJ4
consider the lewis structure for sf6. what is the hybridization on the s atom?
The hybridization on the S atom in SF6 is sp3d2.
In order to determine the hybridization on the S atom in SF6, we first need to draw the Lewis structure for SF6. The Lewis structure shows that the S atom is surrounded by 6 fluorine atoms, each of which is bonded to the S atom. There are no lone pairs on the S atom.
To determine the hybridization on the S atom, we need to count the number of electron groups (bonded atoms and lone pairs) around the S atom. In this case, there are 6 electron groups around the S atom. We then use the formula for hybridization, which is:
hybridization = number of electron groups
For SF6, the hybridization on the S atom is:
hybridization = 6
Therefore, the hybridization on the S atom in SF6 is sp3d2.
The hybridization on the S atom in SF6 is sp3d2, which means that the S atom is surrounded by six electron groups, including five hybrid orbitals and one unhybridized p orbital.
For more information on hybridization kindly visit to
https://brainly.com/question/29020053
#SPJ11
What is the standard potential for the cell reaction in the hydrogen-oxygen fuel cell used in space vehicles? What is the standard potential for the cell reaction in the PEM fuel cell used in electric automobiles?
The standard potential of a cell reaction is determined by combining the standard potentials of two half-reactions. In the hydrogen-oxygen fuel cell, hydrogen and oxygen are the reactants, while in the PEM fuel cell, a proton-exchange membrane separates the anode and cathode regions.
Combining the standard potentials of two half-reactions yields the standard potential of a cell reaction. Hydrogen and oxygen are the reactants in the hydrogen-oxygen fuel cell, which produces energy and water. A proton-exchange membrane divides the anode and cathode areas of the PEM fuel cell, which produces electricity by converting hydrogen and oxygen into water and heat.
To know more about cell reaction Visit:
https://brainly.com/question/31854007
#SPJ11
The standard potential for the cell reaction in the hydrogen-oxygen fuel cell used in space vehicles is 1.23 V, while the standard potential for the cell reaction in the PEM fuel cell used in electric automobiles is 1.23 to 1.24 V.
A hydrogen-oxygen fuel cell generates electricity by electrochemically reacting hydrogen and oxygen. The electrode reactions in the cell's two half-cells produce the electrical power that drives the cell. Hydrogen is oxidized in the anode half-cell, producing two hydrogen ions and two electrons.H2(g) → 2H+(aq) + 2e-Oxygen is reduced in the cathode half-cell, where two hydrogen ions, two electrons, and one oxygen molecule combine to produce water.1/2O2(g) + 2H+(aq) + 2e- → H2O(l)
The hydrogen-oxygen fuel cell's overall reaction is the sum of these two half-cell reactions. The cell's total voltage can be determined by combining the two half-cell potentials. The hydrogen-oxygen fuel cell has a standard cell potential of 1.23 V.
A polymer electrolyte membrane fuel cell (PEMFC) is a type of fuel cell that operates at relatively low temperatures (typically 60 to 80 °C). It produces electricity by electrochemically combining hydrogen and oxygen. The PEM fuel cell's anode side features a hydrogen gas diffusion layer and a platinum catalyst that splits incoming hydrogen molecules into positively charged hydrogen ions and negatively charged electrons.H2(g) → 2H+(aq) + 2e-
The cathode side features a porous carbon paper layer with a platinum catalyst that allows oxygen gas to flow to the catalyst surface, where it reacts with hydrogen ions and electrons to create water.1/2O2(g) + 2H+(aq) + 2e- → H2O(l)
The total voltage of the PEM fuel cell is determined by the combination of the two half-cell reactions. Its standard potential ranges from 1.23 to 1.24 V.
To learn more about automobiles visit;
https://brainly.com/question/17326089
#SPJ11
What is the∆S° of 0₂
Answer:0
Explanation: zero because it is the most stable form of oxygen in its standard state