what is the concentration of hcl if 20m of acid is neutralized by 30 ml of a 0.1 m solution of sodium hydroxide

Answers

Answer 1

The concentration of the acid that is neutralized by the base is 0.15 M

What is neutralization?

A chemical reaction between an acid and a base that produces salt and water is referred to as neutralization. A neutral or nearly neutral solution is created as a result of the procedure, which balances the reactants' acidic and basic characteristics.

In a neutralization process, the base receives a hydrogen ion (H+) that the acid has donated.

We can see that the reaction equation is;

HCl + NaOH ---->NaCl + H2O

Then;

Number of moles of the NaOH = 0.1 M * 30/1000

= 0.003 moles

We have that;

n = CV

C = n/V

C = 0.003 * 1000/20

C = 0.15 M

Learn more about neutralization:https://brainly.com/question/14156911

#SPJ4


Related Questions

Nitric oxide and nitrogen dioxide are found in photochemical smog. Nitrogen dioxide if formed from nitrogen monoxide in the exhaust of automobile engines. A possible mechanism for this reaction is given below. What is the rate law predicted by the mechanism? Reaction: 2 NO(g) + O2(g) -----> 2 NO2(g) Step 1 (fast and reversible): NO + NO <-----> N2O2 Step 2 (fast and reversible): N2O2 <-----> N + NO2 Step 3 (slow): N + O2 -----> NO2

Answers

The rate law predicted by the mechanism for the reaction is k [NO]^2 [O2]. Thus, the correct option is B.

The possible mechanism for the reaction of the formation of nitrogen dioxide from nitrogen monoxide in the exhaust of automobile engines is given as follows: Reaction: 2NO(g) + O2(g) → 2NO2(g)Step 1 (fast and reversible): NO + NO <-----> N2O2Step 2 (fast and reversible): N2O2 <-----> N + NO2Step 3 (slow): N + O2 → NO2Nitric oxide (NO) and nitrogen dioxide (NO2) are found in photochemical smog.

The reaction given above is an example of a gas-phase reaction mechanism. The slowest step is also referred to as the rate-determining step since the overall rate of reaction is determined by this slow step.

The rate law predicted by the mechanism is given below: Rate = k [NO]^2 [O2]The rate law predicted by the mechanism is directly proportional to the concentrations of the reactants in the slow step. Therefore,

the rate law predicted by the mechanism for the reaction is k [NO]^2 [O2]. Thus, the correct option is B.

to know more about nitrogen dioxide visit :

https://brainly.com/question/30459594

#SPJ11

calculate δg∘ for this reaction at 25 ∘c. 3no2(g)+h2o(l)→2hno3(aq)+no(g)

Answers

The value of ΔG° (Gibbs free energy) for the given reaction is -275.6 kJ/mol.

The given reaction can be expressed by the following equation.

3NO2(g) + H2O(l) → 2HNO3(aq) + NO(g)

To calculate ΔG° of this reaction, we will require the ΔG° of formation for the reactants and products.

The equation is:

N2(g) + 3O2(g) → 2NO2(g) ΔG° = 51.5 kJ/mol

H2O(l) → H2(g) + 1/2O2(g) ΔG° = -237.1 kJ/mol

HNO3(aq) → H+(aq) + NO3-(aq) ΔG° = -174.8 kJ/mol

NO(g) → 1/2N2(g) + 1/2O2(g) ΔG° = 86.8 kJ/mol

Here, we see that there are 3 moles of NO2(g) on the left side and 2 moles of NO2(g) on the right side.

Hence, the ΔG° of the reaction will be negative (as there are more reactants than products) and will be calculated as:

ΔG° = ΣnΔG°(products) - ΣmΔG°(reactants)

ΔG° = [2 × ΔG°(HNO3(aq))] + [ΔG°(NO(g))] - [3 × ΔG°(NO2(g))] - [ΔG°(H2O(l))]

ΔG° = [2 × (-174.8 kJ/mol)] + [86.8 kJ/mol] - [3 × (51.5 kJ/mol)] - [-237.1 kJ/mol]

ΔG° = -275.6 kJ/mol

Therefore, the value of ΔG° for the given reaction is -275.6 kJ/mol.

Learn more about Gibbs free energy at: https://brainly.com/question/9179942

#SPJ11

the figure shows two vectors t⃗ t→t_vec and u⃗ u→u_vec separated by an angle θtuθtutheta_tu. (figure 1) you are given that t⃗ =(3,1,0)t→=(3,1,0), u⃗ =(2,4,0)u→=(2,4,0), and t⃗ ×u⃗ =v⃗ t→×u→=v→.

Answers

The given vectors are:u⃗ =(2,4,0)u→=(2,4,0) and t⃗ =(3,1,0)t→=(3,1,0)We are given that t⃗ ×u⃗ =v⃗ t→×u→=v→.

We can find the magnitude of the vector product by using |v⃗ |=|t⃗ ||u⃗ |sin θtuθtutheta_tu, where |v⃗ |=|t⃗ ||u⃗ |sin θtuθtutheta_tu and θtuθtutheta_tu is the angle between vectors t⃗ t→t_vec and u⃗ u→u_vec.So, |v⃗ |=|t⃗ ||u⃗ |sin θtuθtutheta_tu|t⃗ |=3²+1²=10|u⃗ |=2²+4²=20|v⃗ |=|t⃗ ||u⃗ |sin θtuθtutheta_tu=10×20×sin θtuθtutheta_tu=200sin θtuθtutheta_tuNow, t⃗ ×u⃗ is given by the following formula:t⃗ ×u⃗ =(t2u3−t3u2)i^+(t3u1−t1u3)j^+(t1u2−t2u1)k^⇒t⃗ ×u⃗ =|〈ijkt123t⃗ u⃗ 〉||〈ijkt123t⃗ u⃗ 〉|×(t2u3−t3u2)i^+(t3u1−t1u3)j^+(t1u2−t2u1)k^∴|v⃗ |=|t⃗ ×u⃗ |=√[(t2u3−t3u2)²+(t3u1−t1u3)²+(t1u2−t2u1)²]=√[(3×4−1×0)²+(0×2−3×2)²+(3×0−1×4)²]=√[12+36+16]=√64=8Hence, |v⃗ |=8, and the magnitude of the vector product is 8.

To know more about vector , visit ;

https://brainly.com/question/28028700

#SPJ11

using noble gas notation write the electron configuration for the titanium atom.

Answers

The notation for noble gas is based on the electron configuration of the nearest noble gas, which can be used to represent the valence electrons of an atom. The notation for noble gas is used to represent the electron configuration of elements.

To write the electron configuration for the titanium atom, we can use the notation for noble gas as follows:1s²2s²2p⁶3s²3p⁶4s²3d²In order to write the electron configuration of an element, we first write the number of electrons in the first energy level, then the second energy level, and so on. We then add the electrons in each sublevel in order of increasing energy. Finally, we add the remaining electrons to the highest energy sublevel. This gives us the electron configuration of the element.In the case of titanium, the electron configuration is as follows:1s²2s²2p⁶3s²3p⁶4s²3d²In conclusion, the electron configuration for the titanium atom can be written using noble gas notation as 1s²2s²2p⁶3s²3p⁶4s²3d².

For more information on titanium atom visit:

brainly.com/question/29793325

#SPJ11

what is happening in the first step of the mechanism of the reaction between oxone, nacl and borneol?

Answers

In the first step of the mechanism of the reaction between Oxone, NaCl, and borneol, the cyclic hemiketal of borneol is oxidized by Oxone, which forms a ketone. Oxone is an oxidizing agent that is used in the organic synthesis of various organic compounds.

It contains peroxymonosulfate ions that are strong oxidizing agents and react with organic compounds to oxidize them. In the presence of NaCl, the oxidizing power of oxone is increased and its efficiency is enhanced.The reaction of Oxone, NaCl, and borneol occurs through a mechanism that involves two steps.

The first step is the oxidation of borneol by Oxone to form a ketone. The cyclic hemiketal of borneol is oxidized by oxone to form a ketone. The reaction takes place in two stages.In the first stage, oxone oxidizes the cyclic hemiketal of borneol to form a ketone. This is a chemical reaction that involves the transfer of electrons from the cyclic hemiketal of borneol to Oxone.

Oxone acts as an oxidizing agent and accepts the electrons from borneol to form the ketone. The reaction takes place in the presence of NaCl, which enhances the efficiency of the reaction.In the second stage, the ketone formed in the first stage reacts with oxone to form an ester. This reaction is also a chemical reaction that involves the transfer of electrons. The ketone reacts with Oxone to form a peroxyhemiketal intermediate, which then reacts with water to form an ester.

To know more about reaction, refer

https://brainly.com/question/25769000

#SPJ11

a flame test is performed for an unknown ionic compound. the flame observed is a pale violet color. what ion is likely to be present? ᴹᵍ²⁺ ²⁺ ᶜᵃ ᴺᵃ⁺ ᴷ⁺ ˢᵒ

Answers

The pale violet color in a flame test is characteristic of potassium ion (K+). This is because when potassium is heated, the electrons in its outermost shell are excited to a higher energy level. When they return to their ground state, they release energy in the form of light.

The color of the light corresponds to the wavelength of the energy released. The energy released by potassium produces a pale violet color in the flame

A flame test is a procedure that involves heating an unknown substance to observe the color of the flame. The color of the flame is an indication of the presence of certain ions in the compound. The pale violet color in a flame test is characteristic of potassium ion (K+). The energy released by potassium produces a pale violet color in the flame.

A flame test is a procedure used to determine the presence of certain ions in a compound. It involves heating an unknown substance to observe the color of the flame. The color of the flame is an indication of the presence of certain ions in the compound. The pale violet color in a flame test is characteristic of potassium ion (K+). This is because when potassium is heated, the electrons in its outermost shell are excited to a higher energy level. When they return to their ground state, they release energy in the form of light. The energy released by potassium produces a pale violet color in the flame

The presence of a pale violet color in a flame test is indicative of the presence of potassium ion (K+) in an unknown ionic compound.

To know more about potassium visit:

brainly.com/question/13321031

#SPJ11

determine whether these compounds have or lack a good leaving group for substitution and elimination reactions.

Answers

When it comes to substitution and elimination reactions, good leaving groups are crucial. Compounds that have a good leaving group are more likely to undergo these types of reactions, whereas compounds lacking a good leaving group are less likely to react in this way.

A leaving group is a portion of a molecule that dissociates to form a new chemical entity during a substitution or elimination reaction. A leaving group should have a negative charge or a partial negative charge, as well as a stable molecular structure. This makes it easier for the leaving group to dissociate and form a new bond with the incoming nucleophile, resulting in a substitution reaction or with the elimination of a nucleophile, resulting in an elimination reaction.

Below are some compounds and their leaving groups:

Compounds with good leaving groups: Alcohols, ethers, and water can be transformed into good leaving groups by protonation. Hydrogen ions can be readily removed from an alcohol or water molecule, resulting in the formation of a molecule with a positive charge and an excellent leaving group. In a similar way, ethers can be protonated to form a good leaving group such as R-OH2+The halogens (chlorine, bromine, and iodine) are excellent leaving groups. Halogens are electronegative, and the bond between the halogen and the molecule in question is polarized, making the halogen a good leaving group.

Compounds with poor leaving groups: Hydrocarbons, alkanes, alkenes, and alkynes all have poor leaving groups. The carbon-carbon bond is nonpolar, and there is no way to stabilize the negative charge that will be formed if this bond breaks, making it a poor leaving group. However, acidic protons can be removed from the hydrocarbon or alkene, resulting in the formation of a carbon-carbon double bond, which has a polarized bond. The polarized bond can then act as a good leaving group.

To learn more about substitution visit;

https://brainly.com/question/29383142

#SPJ11

draw the product formed when (s)−butan−2−ol is treated with tscl and pyridine.

Answers

TsCl is the abbreviation for tosyl chloride, a reagent used in organic synthesis as a source of the tosyl group.

Tosyl groups, also known as toluenesulfonyl groups, are employed in organic synthesis as protecting groups for alcohols, phenols, and amines. They are also used in the formation of sulfonamide and sulfonate esters.

The reaction can be represented as follows: To begin, (S)-butan-2-ol is treated with pyridine and tosyl chloride to form a tosylate ester. The reaction can be broken down into two stages:1. The alcohol reacts with pyridine to generate an intermediate.2. The intermediate reacts with tosyl chloride to form a tosylate ester.As shown below, the reaction is depicted in the following figure: Thus, the product formed is (S)-butan-2-yl tosylate as shown below:

To learn more about chloride visit;

https://brainly.com/question/32108518

#SPJ11

calculate the molar solubility of agcl in a 1.0m nh3 solution

Answers

To calculate the molar solubility of AgCl in a 1.0M NH3 solution, the solubility product (Ksp) must be known. For AgCl, Ksp is 1.77 × 10^-10 at 25°C. AgCl dissociates as follows:AgCl (s) ⇌ Ag+ (aq) + Cl- (aq)The molar solubility of AgCl in pure water can be determined using the Ksp expression.

Let the concentration of Ag+ and Cl- in pure water be "x." Ksp = [Ag+][Cl-]Ksp = x * x = x^2x = √Kspx = √(1.77 × 10^-10) = 1.33 × 10^-5Molar solubility is the number of moles of solute dissolved in 1 L of the solution. Thus, the molar solubility of AgCl in water is 1.33 × 10^-5 M.Now, AgCl is added to a 1.0M NH3 solution. This increases the concentration of NH3 in the solution, and the NH3 binds to Ag+ to form a complex ion, Ag(NH3)2+.Ag+ (aq) + 2NH3 (aq) ⇌ Ag(NH3)2+ (aq)The equilibrium constant for this reaction is given by:Kf = [Ag(NH3)2+] / [Ag+][NH3]^2where Kf is the formation constant for the complex ion.The molar solubility of AgCl in the NH3 solution can be calculated using the Ksp and Kf expressions. To do this, we must make some assumptions:Assumption 1: Since AgCl is a sparingly soluble salt, its molar solubility will be much less than the concentration of NH3 in the solution. Thus, we can assume that the concentration of NH3 remains constant throughout the reaction.Assumption 2: Since the concentration of Ag+ is much less than the concentration of NH3, we can assume that the concentration of NH3 is not significantly affected by the formation of the complex ion. In other words, NH3 is not used up in the reaction, and its concentration remains constant. The first assumption allows us to treat the NH3 concentration as a constant, while the second assumption allows us to use the initial concentration of NH3 in the solution as the concentration of NH3 in the equilibrium expression. Thus, we can write:Kf = [Ag(NH3)2+] / [Ag+][NH3]^2Kf = [Ag(NH3)2+] / [Ag+][NH3]^2 = [Ag(NH3)2+] / (x * [NH3]^2)where x is the molar solubility of AgCl in the NH3 solution.To calculate x, we need to find [Ag+]. Since Ag(NH3)2+ is formed by the reaction of Ag+ and NH3, we know that:[Ag+] = [Ag(NH3)2+] / [NH3]^2Substituting this expression into the Kf expression gives:Kf = [Ag(NH3)2+] / (x * [Ag(NH3)2+] / [NH3]^2 * [NH3]^2)Simplifying this expression gives:Kf = [NH3]^2 / xSolving for x gives:x = [NH3]^2 / Kfx = (1.0M)^2 / (1.7 × 10^7) = 5.9 × 10^-14MTherefore, the molar solubility of AgCl in a 1.0M NH3 solution is 5.9 × 10^-14 M.

For more information on molar solubility visit:

brainly.com/question/28170449

#SPJ11



For each of the following transition metal complexes, determine the oxidation state of the metal, its coordination number, and the number of d electrons on that metal.

(a) OsO4 (b) [Cr(H2O)6]3+ (c) [Cr(H2O)6]2+

(d) [Cr(H2O)4Cl2]+ (e) [Fe(H2O)6]2+ (f) [Co(NH3)6]2+

(g) WCl6 (h) [Pt(CN)4]2- (i) [Mn(H2O)6]2+

(j) Mn(CO)5Br (k) [AuCl2]- (l) [ReH9]2-

Answers

The oxidation state of the metal OsO₄ is +8 , its coordination number is 4, and the number of d electrons on that metal is 0

OsO₄ = Oxidation number +8

coordination number = 4

No. of d electron on metal = 0

(b) [Cr(H₂O)₆]³⁺ = Oxidation number + 3

coordination number = 6

No. of d electron on metal = 3

(c) [Cr(H₂O)₆]²⁺ = Oxidation number +2

coordination number = 6

No. of d electron on metal = 4

(d) [Cr(H₂O)₄Cl₂]⁺ = Oxidation number  +3

coordination number = 6

No. of d electron in metal = 3

(e) [Fe(H₂O)₆]²⁺ = Oxidation number = +2

coordination number = 6

No. of d electron in metal = 6

(f) [Co(NH₃)₆]²⁺ = Oxidation number = +2

coordination number = 6

No. of d electron in metal = 7

(g) WCl₆ = Oxidation number = +6

coordination number = 6

No. of d electron in metal = 0

(h) [Pt(CN)₄]⁻² = Oxidation number = +2

coordination number = 4

No. of d electron in metal = 8

(i) [Mn(H₂O)₆]²⁺ = Oxidation number +2

coordination number = 6

No. of d electron in metal = 5

(j) Mn(CO)₅Br = Oxidation number +1

coordination number = 6

No. of d electron in metal = 5

(k) [AuCl₂]⁻ = Oxidation number +1

coordination number = 2

No. of d electron in metal = 10

(l) [ReH₉]²⁻ = Oxidation number +7

coordination number = 9

No. of d electron in metal = 0

What is meant by the term "transition metal"?

A transition metal is one that produces one or more stable ions with d orbitals that are only partially filled. Despite being members of the d block, scandium and zinc do not qualify as transition metals according to this definition.

What makes a transition metal an element?

Change components (otherwise called progress metals) are components that have to some extent filled d orbitals. An element with the ability to form stable cations and a d orbital that is only partially filled with electrons is one of the transition elements, as defined by IUPAC.

Learn more about Transition metals:

brainly.com/question/30389112

#SPJ4

the equation below shows the decomposition of lead nitrate how many grams of oxygen are produced when 21.5 g no is formed?

Answers

To determine the number of grams of oxygen produced when 21.5 g of nitrogen dioxide (NO2) is formed in the decomposition of lead nitrate, convert the number of moles of O2 to grams using the molar mass of O2: Mass of O2 = (number of moles of O2) x (molar mass of O2).

2 Pb(NO3)2 -> 2 PbO + 4 NO2 + O2 From the balanced equation, we can see that for every 4 moles of NO2 produced, 1 mole of O2 is also produced. To find the number of moles of NO2, we can divide the given mass by the molar mass of NO2. The molar mass of NO2 is calculated as follows: Molar mass of N = 14.01 g/mol Molar mass of O = 16.00 g/mol (x2 since there are two oxygen atoms in NO2) Molar mass of NO2 = 14.01 g/mol + (16.00 g/mol x 2) = 46.01 g/mol. Now we can calculate the number of moles of NO2: Number of moles of NO2 = mass of NO2 / molar mass of NO2. Number of moles of NO2 = 21.5 g / 46.01 g/mol. Next, we use the mole ratio from the balanced equation to find the number of moles of O2 produced: Number of moles of O2 = (number of moles of NO2) / 4. Finally, we convert the number of moles of O2 to grams using the molar mass of O2: Mass of O2 = (number of moles of O2) x (molar mass of O2) By plugging in the values, we can calculate the mass of oxygen produced.

To learn more about oxygen, https://brainly.com/question/9611899

#SPJ11

what type of organic compounds are most easily purified by recrystallization?

Answers

Organic compounds that exhibit a significant difference in solubility between impurities and the desired compound, and form regular crystals with a sharp melting point, are the most easily purified through recrystallization.

Organic compounds that possess a significant difference in solubility between their impurities and the desired compound are most easily purified by recrystallization. Recrystallization is a commonly used technique in organic chemistry for purifying solid compounds based on their differing solubilities at different temperatures.

Crystallization occurs when a solute is dissolved in a solvent at an elevated temperature, and then the solution is cooled down, allowing the solute to form crystals. During this process, impurities present in the solution are excluded from the growing crystals, leading to a purification of the desired compound. The effectiveness of recrystallization depends on the solubility differences between the compound of interest and the impurities.

Organic compounds with a high degree of purity and a sharp melting point are particularly suitable for recrystallization. Compounds that have impurities that are significantly less soluble in the chosen solvent at low temperatures are ideal candidates for recrystallization purification. Additionally, compounds that form well-defined, regular crystals are easier to purify through this method.

Know more about Organic compounds here:

https://brainly.com/question/13508986

#SPJ11

the ph titration curve below is for the titration of a weak diprotic acid with a strong base. h2a(aq) 2 naoh(aq) → na2a(aq) 2 h2o(l) you will use the data obtained from point b to determine

Answers

The pH titration curve shown below is for the titration of a weak diprotic acid with a strong base.

H2A(aq) + 2 NaOH(aq) → Na2A(aq) + 2 H2O(l)What will be determined using the data obtained from point B?Answer:At point B, the pH of the solution is equal to 9.9, and the corresponding volume of NaOH added is 25.5 mL. Using the data obtained from point B, we can determine the pKa2 value of the weak diprotic acid present in the solution.The pKa2 value can be determined from the half-equivalence point between the second and third equivalence points. At the half-equivalence point, the number of moles of the weak acid that has reacted with NaOH equals the number of moles of the weak acid that has not reacted with NaOH. Therefore, the weak acid is present in solution as both the conjugate base and the weak acid.To get the pKa2 value of the weak diprotic acid, we have to determine the pH at the half-equivalence point, and then we will determine the pKa2 value. It can be calculated using the formula:pKa2 = pH at half-equivalence point + log10 [A2-] / [HA2]Where[A2-] is the concentration of the conjugate base at the half-equivalence point[HA2] is the concentration of the weak acid at the half-equivalence point.In the present scenario, the pH of the solution at point B is 9.9, which is close to the pH at the half-equivalence point. Hence, we can use the pH at point B as the pH at the half-equivalence point.

To know more about weak acid  , visit ;

https://brainly.com/question/24018697

#SPJ11

how do you make 100.00 ml of 0.25 m cuso4•5h2o solution from solid cuso4•5h2o? be specific, including the exact glassware and weight of cuso4•5h2o needed.]

Answers

To prepare a 100.00 ml solution of 0.25 M CuSO4·5H2O from solid CuSO4·5H2O, you will need the following materials and steps.

Dissolve the weighed CuSO4·5H2O in a small amount of distilled water in a beaker. Stir until all the solid is dissolved.Transfer the dissolved CuSO4·5H2O solution quantitatively to a 100.00 ml volumetric flask. You can use a funnel to aid in the transfer.Rinse the beaker with distilled water and add the rinsings to the volumetric flask to ensure all the dissolved CuSO4·5H2O is transferred.Add distilled water to the volumetric flask up to the mark on the neck of the flask. Use a dropper or a wash bottle to carefully reach the mark without overfilling.Cap the volumetric flask tightly and mix.

To know more about bottle visit :

https://brainly.com/question/5598654

#SPJ11

Use the solubility curve to match each scenario with its correct saturation level. All scenarios are in 100g of water.

Answers

The curve represents saturation. Below the curve, the water is unsaturated. Above the curve, water is supersaturated. This means that more solute is present than the water can contain.

The line of the solubility curve indicates that the solution is saturated. A saturated solution is defined as a solution in which 100 g of solute is dissolved in 100 g of water. Simulations below this line indicate unsaturated solutions.

The difference between unsaturated and saturated solutes can be determined by adding very small amounts of solute to the solution. In unsaturated solutes, solutes will dissolve, and solutes in saturated solutes will not dissolve. In saturated solutes, crystals will form very quickly around the added solute.

To learn more about saturation, refer to the link:

https://brainly.com/question/28215821

#SPJ1

what is the ph of a solution where 50.0 ml of 0.050 m nh3 (kb = 1.8 * 10-5) is mixed with 12.0 ml of 0.10 m hydrobromic acid (hbr)?

Answers

The pH of the solution where 50.0 mL of 0.050 M NH3 (Kb = 1.8 * 10-5) is mixed with 12.0 mL of 0.10 M hydrobromic acid (HBr) is 5.57.

The pH of a solution where 50.0 ml of 0.050 M NH3 (Kb = 1.8 * 10-5) is mixed with 12.0 ml of 0.10 M hydrobromic acid (HBr) can be calculated as follows:

Step 1: Write the balanced chemical equationNH3(aq) + HBr(aq) → NH4Br(aq)Step 2: Find moles of NH3 and HBrMoles of NH3 = (50.0 mL)(0.050 mol/L) = 0.0025 molMoles of HBr = (12.0 mL)(0.10 mol/L) = 0.0012 mol

Step 3: Determine which of the two reagents will run out firstNH3(aq) is a weak base and HBr(aq) is a strong acid, so they will react to form NH4+ and Br- ions. But HBr(aq) will completely dissociate in water while NH3(aq) will undergo a partial ionization. Thus, HBr will be the limiting reactant and all of the 0.0012 mol of HBr will react with 0.0012 mol of NH3 to produce NH4Br.

Step 4: Calculate moles of remaining NH3Moles of NH3 left = 0.0025 mol - 0.0012 mol = 0.0013 mol

Step 5: Calculate concentration of NH4+ ionConcentration of NH4+ ion, [NH4+] = moles of NH4+ ion/volume of solutionMoles of NH4+ ion = moles of HBr used = 0.0012 molVolume of solution = 50.0 mL + 12.0 mL = 62.0 mL = 0.062 L[NH4+] = 0.0012 mol/0.062 L = 0.019 mol/L

Step 6: Write the equilibrium equation and expression for NH4+ ionNH4+(aq) + H2O(l) ⇌ H3O+(aq) + NH3(aq)Kb = [H3O+][NH3]/[NH4+]

Since Kb is given, we can find the Kb for NH4+ ion as follows:Kb * Kw/Ka = [H3O+][NH3]/[NH4+]1.8 * 10^-5 * 1.0 * 10^-14/5.6 * 10^-10 = [H3O+][0.0013]/[0.019][H3O+] = 2.7 * 10^-6pH = -log[H3O+]pH = -log(2.7 * 10^-6)pH = 5.57.

The pH of the solution where 50.0 mL of 0.050 M NH3 (Kb = 1.8 * 10-5) is mixed with 12.0 mL of 0.10 M hydrobromic acid (HBr) is 5.57.

To learn more about solution visit;

https://brainly.com/question/1616939

#SPJ11

draw a structural formula for the major organic product of the reaction shown below. h30 ether ch3ch2ch2ch=çcch2ch3 (ch3)2culi ci • you do not have to consider stereochemistry.

Answers

The structural formula of the major organic product of the given reaction is: C6H12

Given equation :

H30 ether CH3CH2CH2CH=ÇCCH2CH3 (CH3)2CuLi CI

The reaction given is a Grignard reaction. Grignard reagent acts as a nucleophile and attacks the electrophilic carbon atom of the carbonyl group and forms a carbinol. The carbinol intermediate then dehydrates and forms the alkene.

Let's draw a structural formula for the major organic product of the given reaction:

Therefore, the structural formula of the major organic product of the given reaction is shown below.

Learn more about structural formula from this link:

https://brainly.com/question/514499

#SPJ11

how many alkenes yield 2,2,3,4,4−pentamethylpentane on catalytic hydrogenation?

Answers

Pentamethylpentene yields 2,2,3,4,4−pentamethylpentane on catalytic hydrogenation. There is only one alkene that yields 2,2,3,4,4−pentamethylpentane on catalytic hydrogenation.

Alkenes are unsaturated hydrocarbons that have a double bond between two carbon atoms in their structure. In terms of their physical properties, they are colorless, nonpolar, and have a boiling point that rises with the number of carbons in the compound. Alkenes are used in various chemical processes, including the manufacture of polymers, detergents, and fuels.

Catalytic hydrogenation is a chemical reaction in which hydrogen is added to an organic compound in the presence of a metal catalyst. The process usually involves the hydrogenation of carbon-carbon double or triple bonds. Catalytic hydrogenation is an essential technique for the reduction of alkenes and alkynes. This technique is used in a wide variety of industries, including the production of food, fuels, and pharmaceuticals.

2,2,3,4,4−pentamethylpentane is an organic compound. It is an isomer of hexamethylpentane. This compound is used in the production of high-performance fuels. 2,2,3,4,4−pentamethylpentane can be synthesized through the catalytic hydrogenation of pentamethylpentene.

Learn more about catalytic hydrogenation at https://brainly.com/question/31391872

#SPJ11

determine the number of grams of h2 formed when 250.0 ml of 0.743 m hcl solution reacts with 3.41 × 1023 atoms of fe according to the following reaction. 2HCl + Fe arrow H2+ FeCl2

Answers

Given data:Volume of HCl solution = 250.0 mL = 0.2500 LConcentration of HCl solution = 0.743 mNumber of atoms of Fe = 3.41 × 10²³.

The balanced chemical equation for the reaction of Fe with HCl is:Fe + 2HCl → FeCl₂ + H₂The molar ratio of Fe to H₂ is 1:1.According to the balanced chemical equation,2 moles of HCl produce 1 mole of H₂. Hence, 1 mole of HCl will produce 1/2 moles of H₂.The number of moles of HCl in 250.0 mL of 0.743 M HCl solution can be calculated as follows:Number of moles of HCl = Molarity × Volume of HCl solution= 0.743 mol/L × 0.2500 L= 0.186 molThe number of moles of H₂ produced can be calculated using the mole ratio as follows:Number of moles of H₂ = Number of moles of Fe= (3.41 × 10²³ atoms of Fe)/(6.022 × 10²³ atoms/mol)= 0.567 molHence, the number of moles of H₂ produced is 0.567 mol.The mass of 1 mole of H₂ is equal to the molar mass of H₂. The molar mass of H₂ is (2 × 1.008 g/mol) = 2.016 g/mol. The mass of H₂ can be calculated as follows:Mass of H₂ = Number of moles of H₂ × Molar mass of H₂= 0.567 mol × 2.016 g/mol= 1.143 gHence, the number of grams of H₂ formed is 1.143 g. Therefore, the correct option is (A) 1.143.

To know more about moles , visit ;

https://brainly.com/question/29367909

#SPJ11

the substance that is completely consumed in a reaction is called the ______.

Answers

The substance that is completely consumed in a reaction is called the limiting reactant or limiting reagent. A limiting reactant or limiting reagent is a substance that is completely consumed in a reaction. It limits the amount of product that can be produced since it gets consumed first before the other reactants.

Any excess of the other reactants will remain unchanged since the limiting reactant has been fully utilized. Hence, the quantity of the limiting reactant determines the amount of product produced. The limiting reactant in a reaction can be identified through stoichiometry calculations. The reactant that produces the least amount of product is the limiting reactant. Stoichiometry calculations involve determining the mole ratio between the reactants and products. By comparing the mole ratio of the reactants with the actual mole ratio, the limiting reactant can be identified. To summarize, the substance that is completely consumed in a reaction is called the limiting reactant or limiting reagent. The limiting reactant limits the amount of product that can be produced since it gets consumed first before the other reactants. The limiting reactant can be identified through stoichiometry calculations.

To Know more about reactants visit:

brainly.com/question/30129541

#SPJ11

for the given reaction, what volume of o2 would be required to react with 7.4 l of pcl3 , measured at the same temperature and pressure? 2pcl3(g) o2(g)⟶2pocl3(g)

Answers

The balanced chemical equation for the reaction between PCl3 and O2 is:2PCl3(g) + O2(g) → 2POCl3(g)The equation shows that 2 moles of PCl3 react with 1 mole of O2 to produce 2 moles of POCl3. 4.3 L of O2 would be required to react with 7.4 L of PCl3.

To determine the volume of O2 required to react with 7.4 L of PCl3, we first need to determine the amount of PCl3 in moles. This can be done using the ideal gas law, PV = nRT, where P is the pressure, V is the volume, n is the number of moles, R is the gas constant, and T is the temperature. Since the pressure and temperature are constant, we can write P1V1 = n1RT1and: P2V2 = n2RT2where the subscripts 1 and 2 refer to the initial and final conditions, respectively. Since the same conditions apply to both gases, we can write: P1V1/T1 = n1Rand: P2V2/T2 = n2RWe can rearrange these equations to give:n1 = P1V1/RT1and:n2 = P2V2/RT2Since the reaction occurs at the same temperature and pressure, we can write: P1V1/RT1 = P2V2/RT2and:n2 = (P1V1/RT1)(V2/V1)Substituting the values: P1 = P2 = 1 atmT1 = T2 = 273 K (0°C)Volume of PCl3 = 7.4 LNumber of moles of PCl3:n1 = P1V1/RT1 = (1 atm)(7.4 L)/(0.082 L atm/K mol)(273 K) = 0.362 molTo react with 0.362 mol of PCl3, we need half as many moles of O2:n2 = (P1V1/RT1)(V2/V1) = (1 atm)(V2/7.4 L)/(0.082 L atm/K mol)(273 K) = 0.181 molThe volume of O2 required is therefore: V2 = n2RT/P1 = (0.181 mol)(0.082 L atm/K mol)(273 K)/(1 atm) = 4.3 LAnswer: 4.3 L of O2 would be required to react with 7.4 L of PCl3.

To Know more about ideal gas law visit:

brainly.com/question/12624936

#SPJ11

which of the following species exhibit resonance? no3−; so32−; po33− group of answer choices so32− and po33− no3−, so32−, and po33− no3− only po33− only no3− and so32−

Answers

the correct answer is: NO3− and SO32− species exhibit resonance. The species that exhibit resonance among the given options are NO3− and SO32−.What is Resonance? Resonance is defined as a phenomenon

that occurs when the two or more structures have the same energy and can be exchanged for each other via movement of electrons. Resonance helps to stabilize molecules by delocalizing electrons in molecules or ions. In the case of resonance, the resonance hybrid is a structure that is intermediate to the resonance structures. Resonance structures are structures in which the position of electrons in molecules or ions can be represented in more than one way. This is because electrons are delocalized in molecules or ions, which results in two or more resonance structures .The molecule NO3− contains three equivalent oxygen atoms, and each oxygen atom has one lone pair of electrons. The nitrogen atom is also connected to one of the oxygen atoms via a double bond, with each of the other two oxygen atoms connected to nitrogen via a single bond.SO32− ion also contains three equivalent oxygen atoms with a negative charge on each atom and one sulfur atom connected to one of the oxygen atoms via a double bond, with each of the other two oxygen atoms connected to sulfur via a single bond.PO33− is not exhibiting resonance because, unlike NO3− and SO32−, it only has one Lewis structure.  

to know more about ions, visit

https://brainly.com/question/13692734

#SPJ11

the transamination system is responsible for the generation of a large number of amino acids.
This involves the creation of an amino acid from a keto acid. Typically; where does the nitrogen come from to form the new amino acid? Glutamine donates Its side-chain nitrogen; Glutamate donates its side-chain nitrogen Glutamate donates its a-amino group_ Glutamine donatesits amino group: Guanylate donates its a-amino group

Answers

The transamination reaction involves the transfer of an amino group from an amino acid to a keto acid to form a new amino acid.

The nitrogen to form the new amino acid usually comes from glutamate, which donates its a-amino group, in the transamination system. The correct answer is "Glutamate donates its a-amino group".

The transamination system is responsible for the generation of a large number of amino acids. This involves the creation of an amino acid from a keto acid.

In the transamination reaction, the keto acid is converted to an amino acid by transfer of an amino group from a donor amino acid to the keto acid molecule. In this reaction, the amino group (-NH2) is transferred from the donor amino acid to the keto acid to form a new amino acid.

This type of reaction is called a transamination reaction. In this reaction, the donor amino acid loses its amino group and becomes a keto acid while the keto acid becomes an amino acid. Thus,

The transamination reaction involves the transfer of an amino group from an amino acid to a keto acid to form a new amino acid.

to know more about amino acid visit :

https://brainly.com/question/32278455

#SPJ11

Place the following in order of increasing magnitude of lattice energy. Cao Mgo Srs Srs < MgO < Cao CaO < Mgo < Srs Srs < CaO < MgO CaO < Srs < Mgo O MgO < Call < Srs

Answers

Lattice energy refers to the energy released when ions join together to form a solid compound. The amount of lattice energy produced determines the strength of the ionic bond.

The greater the lattice energy, the stronger the bond, and the harder it will be to separate the atoms. Lattice energy can be influenced by many factors, including the charge on the ions, the size of the ions, and the arrangement of the ions.

The order of increasing magnitude of lattice energy is CaO < MgO < SrS.

The reason for this order can be explained by considering the size and charge of the ions. The smaller the ions, the closer they can be packed together, and the greater the lattice energy. Similarly, the greater the charge on the ions, the stronger the attraction between them, and the greater the lattice energy.

Calcium oxide (CaO) has the smallest ions, which are also the most highly charged (+2 and -2), so it has the highest lattice energy. Magnesium oxide (MgO) has slightly larger ions, but they are still highly charged (+2 and -2), so it has the second-highest lattice energy. Strontium sulfide (SrS) has the largest ions, and they are also the least highly charged (+2 and -2), so it has the lowest lattice energy.

Therefore, the correct order of increasing magnitude of lattice energy is CaO < MgO < SrS.

To learn more about energy visit;

https://brainly.com/question/1932868

#SPJ11

Calculate the solubility at 25 °C of AgCl in pure water and in a 0.0140 M AgNO_3 solution. You'll find K Round both of your answers to 2 significant digits.

Answers

The  solubility at 25 °C of AgCl in pure water and in a 0.0140 M AgNO₃ solution is 1.9   ˣ 10 ⁻³ g / L

Kp of AgCl = 1.76 × 10 ⁻¹⁰

                       AgCl         ⇔     Ag⁺ + Cl ⁻

1.76 ₓ 10 ⁻¹⁰ = s . s

s = 1.33 ˣ 10 ⁻⁵ M

In g/ L = s ˣ molar mass of AgCl

          = 1.33 ˣ 10⁻⁵ ˣ 143

            =  1.9   ˣ 10 ⁻³ g / L

        AgCl       ⇔         Ag ⁺      +      Cl ⁻

                                 s + 0.0140          s

Kap = (s + 0.0140) . s

1.76 ˣ 10 ⁻¹⁰ = 0.0140 ˣ s

         s =  1.26 ˣ 10 ⁻⁸ M

In g/ L = molarity ˣ molar mass

          =  1.26 ˣ 10 ⁻⁸ ˣ 143

           = 1.8  ˣ 10 ⁻⁶ g/ L

How is solubility defined?

The development of new bonds between the solute and solvent molecules is referred to as solubility. Solubility is the maximum concentration of a solute that dissolves in a known solvent concentration at a given temperature in terms of quantity.

Solubility is affected by what?

Solvency is impacted by 4 variables - temperature, strain, extremity, and atomic size. For the majority of solids that dissolve in liquid water, solubility increases with temperature. This is on the grounds that higher temperatures increment the vibration or motor energy of the solute atoms.

Learn more about Solubility:

brainly.com/question/23946616

#SPJ4

Which of the following is true.
(A) During the water boiling process, potential energy of water molecules decreases.
(B) Boiling temperature increases when pressure decreases.
(C) There is no phase transition directly from solid to gas.
(D) During the freezing process, kinetic energy of water molecules does not change.

Answers

(B) Boiling temperature increases when pressure decreases is the statement which is true among the given options.

When water boils, it undergoes a phase transition from liquid to gas. This process requires the water molecules to absorb energy, which increases their kinetic energy and thus their temperature. The potential energy of water molecules remains constant during this process.

Boiling temperature, however, is affected by pressure. When pressure decreases, the boiling point of water decreases as well. This is because the reduced pressure means that less energy is required to overcome the atmospheric pressure and allow the water molecules to escape into the gas phase.

There is no direct phase transition from solid to gas (C) as this would require the water molecules to absorb a large amount of energy without passing through the liquid phase. Instead, the process involves sublimation, where the solid turns directly into a gas.

During the freezing process, the kinetic energy of water molecules decreases as they lose energy and slow down, eventually transitioning from liquid to solid. Therefore, (D) is false.

Learn more about kinetic energy here:

https://brainly.com/question/999862

#SPJ11

which of the following acids is strongest, based on the values of their acid ionization constants? benzoic acid carbonic acid sulfuric acid hydrazoic acid oxalic acid

Answers

The strongest acid among the following is sulfuric acid, based on the values of their acid ionization constants. Sulfuric acid is a diprotic acid that has two acidic hydrogen atoms, so it has two ionization constants.What is an acid ionization constant

An acid ionization constant (Ka) is a quantitative measure of the strength of an acid in a solution. A high Ka value indicates that an acid will completely ionize in a solution, whereas a low Ka value indicates that an acid will partially ionize in a solution.How can we compare the strength of different acids based on their ionization constants?The ionization constants of different acids can be compared to determine their relative strength. The higher the ionization constant, the stronger the acid. For example, if acid A has an ionization constant of 1 x 10-4 and acid B has an ionization constant of 1 x 10-6, acid A is stronger because it has a higher ionization constant.Now, let's look at the given options and their acid ionization constants:Benzoic acid: Ka = 6.4 × 10-5Carbonic acid: Ka1 = 4.2 × 10-7 and Ka2 = 4.8 × 10-11Hydrazoic acid: Ka = 1.9 × 10-5Oxalic acid: Ka1 = 5.9 × 10-2 and Ka2 = 6.4 × 10-5Sulfuric acid: Ka1 = 1.0 × 103 and Ka2 = 1.2 × 10-2Therefore, we can see that the ionization constant of sulfuric acid is the strongest, based on the values of their acid ionization constants.

To know more about chemical equation, visit ;

https://brainly.com/question/11231920

#SPJ11

the name of the nucleoside that is part of the nucleotide dadp is

Answers

DADP is a nucleotide composed of deoxyadenosine, a nitrogenous base, a pentose sugar, and two phosphate groups attached to the 5' carbon. Nucleosides are organic molecules formed by the combination of a nitrogenous base with a pentose sugar. Ribonucleosides are when the pentose sugar is deoxyribose and deoxyribonucleosides when it is deoxyribose.

DADP (Deoxyadenosine 5'-diphosphate) is a nucleotide composed of deoxyadenosine, a nitrogenous base (adenine), a pentose sugar (deoxyribose), and two phosphate groups attached to the 5' carbon. Nucleosides are organic molecules formed by the combination of a nitrogenous base with a pentose sugar (five-carbon sugar). Ribose is when the pentose sugar is ribose, while deoxyribose is when the pentose sugar is deoxyribose. A nucleoside has no phosphate group, while a nucleotide consists of a nucleoside and a phosphate group.

To know more about DADP Visit:

https://brainly.com/question/32147460

#SPJ11

ammonia, initially at 5 bar, 40°c undergoes a constant specific volume process to a final pressure of 2.75 bar. at the final state, determine the temperature, in °c, and the quality.

Answers

The temperature of the ammonia in the final state is 172.63 K. The quality of the ammonia in the final state is 0.534.

To solve this problem, we need to use the First Law of Thermodynamics, which states that the change in internal energy of a system is equal to the heat added to the system minus the work done by the system.

Since the process is a constant specific volume process, the work done is zero. Therefore, the change in internal energy is equal to the heat added to the system.

We can use the ideal gas law to calculate the initial and final states of ammonia. From the ideal gas law, we know that PV = nRT, where P is the pressure, V is the volume, n is the number of moles of gas, R is the gas constant, and T is the temperature.

Using this equation, we can calculate the initial and final temperatures of ammonia. At the initial state, we have P₁= 5 bar and T₁ = 40°C. At the final state, we have P₂ = 2.75 bar. Since the process is constant specific volume, we know that V₁= V₂.

Therefore, we can calculate the final temperature, T₂, using the equation:
T₂ = (P₂/P₁) * T₁= (2.75/5) * 313.15 = 172.63 K

To calculate the quality, we need to know the enthalpy of saturated liquid and saturated vapor at the final temperature. We can use a steam table to find this information.

Assuming that the ammonia is in a saturated mixture, we can use the following equation to calculate the quality, x:
x = (h₂ - hf) / (hg - hf)

where h₂is the enthalpy of the final state, hf is the enthalpy of saturated liquid at the final temperature, and hg is the enthalpy of saturated vapor at the final temperature.

Using a steam table, we find that hf = -69.07 kJ/kg and hg = 309.83 kJ/kg at 172.63 K. We can also find that the enthalpy of the final state, h₂, is 112.43 kJ/kg.

Plugging these values into the equation, we get:
x = (112.43 - (-69.07)) / (309.83 - (-69.07)) = 0.534

Therefore, the quality of the ammonia at the final state is 0.534.

Learn more about First Law of Thermodynamics here:

https://brainly.com/question/32101564

#SPJ11

use chemdraw to write the balanced chemical equation for this reaction. use chemical structures. no mechanism necessary.

Answers

The balanced equation represents that one molecule of ethanol and one molecule of acetic acid react to form one molecule of ethyl acetate and one molecule of water. The equation is now balanced as there are four carbon atoms, ten hydrogen atoms, and two oxygen atoms on both sides.

Chemical reactions occur when two or more substances combine and transform into a new substance with different physical and chemical properties. A chemical equation represents the transformation of reactants into products. The chemical equation is the symbolic representation of the chemical reaction. The chemical formulae of the reactants and products are written on the left and right sides of the equation, respectively. The coefficient represents the number of molecules or atoms of each substance involved in the reaction. The balanced chemical equation is essential as it follows the law of conservation of matter. According to the law of conservation of matter, matter cannot be created or destroyed; it can only change its form. Therefore, in a balanced chemical equation, the number of atoms of each element is equal on both sides of the equation. To write the balanced chemical equation for the given reaction, we can use ChemDraw. In this reaction, the two reactants are ethanol and acetic acid. They react to form the product, ethyl acetate. The chemical structures of the reactants and products are shown below: EthanolAcetic acid ethyl acetateThe balanced chemical equation for the reaction is: C2H5OH + CH3COOH → C4H8O2 + H2OThe reaction takes place in the presence of a catalyst, sulfuric acid. The balanced equation represents that one molecule of ethanol and one molecule of acetic acid react to form one molecule of ethyl acetate and one molecule of water. The equation is now balanced as there are four carbon atoms, ten hydrogen atoms, and two oxygen atoms on both sides.

To Know more about ethanol visit:

brainly.com/question/29294678

#SPJ11

Other Questions
in comparing two-way communication with one-way communication, research indicates that You want to fit a least-squares regression line to the following data {(1, 2), (2, 4),(3, 5),(4, 7)}. Find the equation of the fitted regression line. 35.If the permanent annual rate of return on an asset that costs$20,000 is 5 percent, then each year the owner of the asset willearn: Group of answer choicesa. $1,000.b. $1,200.c. $1,400.d. $1,6 How much sand must be removed from the ground to make a rectangular hole measuring 4 in by 2 in by 3 in and a 3-inch cube hole? cubic Inches of sand must be removed. 3 Enter the answer 4 2 First, watch the Free Hugs video and then read the article about Free HugsWhat did you like about the verbal and non-verbal messages you saw and heard?Consider how your interpretation of the video changed after reading the article.Describe two situations in your own life (one verbal and one non-verbal) where you feel that you have communicated poorly.Refer to specific information given in the text, videos, and web pages to discuss how you could have enhanced your communication in the situations you described. Let X be normally distributed with some unknown mean and standard deviation X- o = 4. The variable Z = X is distributed according to the standard normal distribution. Enter the value for A = 4 It is known that 12- P(Z < Z < 2-H) - = P(X < 12) = 0.3 What is P(Z < (enter a 4 decimal value). Determine = (round to the one decimal place). The substitution effect can be measured holding _______ constant. income utility the price of at least one good the price of all goods Which of the following is another potential problem in interpreting their results? A. They did not look at the age or race of their subjects. OB. Steroid use has been linked to liver cancer. OC. All of the above. D. The way that steroids act in the body is still not very well understood. E. Certain personality types might be linked to both violent behavior and steroid use. Determine the length of the product production cycle for a parallel run (give the result in minutes). The data for the calculations are presented in the table. The batch size is 500 pieces, the transport batch size is r = 20, the mean inter-operative time tmo = 25min.Oparations12345tij[min]248.2514.46Ns32122 find the critical points, relative extrema, and saddle points of the function. (if an answer does not exist, enter dne.) f(x, y) = 4 (x 8)2 y2 what is ;---The relationship between interest rates with GDP??---The relationshipbetween exchange rates with GDP??---The relationship between inflation with GDP?? 1/27^{4-x}=9^{2x-1}Please if you could explain how you get your answer, that would be great. A two-year bond with par value $1,000 making annual coupon payments of $90 is priced at $1,000. a. What is the yield to maturity of the bond? (Round your answer to 1 decimal pace.) Yield to maturity 9 use the fact that |ca| = cn|a| to evaluate the determinant of the n n matrix. a = 5 0 30 0 0 5 0 0 10 0 5 0 0 15 0 5 A proton is acted on by a uniform electric field of magnitude 423 N/C pointing in the negative y direction. The particle is initially at rest.(a) In what direction will the charge move?(b) Determine the work done by the electric field when the particle has moved through a distance of 2.35 cm from its initial position.(c) Determine the change in electric potential energy of the charged particle.(d) Determine the speed of the charged particle. this lab simulates the analysis of just one str in the genome. would this analysis be sufficient for The Davis Medical Center (DMC) is a primary care medical clinic in a small town. It provides all the aspects of a medical clinic including checkups and minor medical procedures. Because it is some distance from a hospital and most medical specialty offices it incorporates some basic diagnostic capabilities such as X-Ray, MRI, basic blood work, etc. As with most current medical facilities in the US, it suffers from a wide variety of inefficiencies such as scheduling issues, delays, long patient waits and movements within the facility, cumbersome, time consuming, and error prone medical record and other data handling processes, high levels of medical errors, etc. To address these issues, DMC has implemented a Lean Six Sigma program and you have been hired as a Black Belt to work in the program.DMC is currently in the preliminary planning stages of expanding to offer its clients more comprehensive wellness services including diet and nutrition counseling, fitness evaluation, activity and exercise planning including related physical therapy, etc. Goals are to include:Assist clients to develop a sustainable wellness lifestyleDevelop diet, exercise stress management, and other lifestyle programs which are more comprehensive of the individual patient especially injuries and medical conditionBusiness model based on high volume of clients Which of the following is not a primary purpose of audit working papers or audit documentation?a. To coordinate the examination.b. To assist in preparation of the audit report.c. To support the financial statements.d. To provide evidence of the audit work performed. determine e for a galvanic (voltaic) cell if g = -4.6 kj/mol and n = 3. (f = 96,500 j/(vmol)) Suppose there are 2 commodities (good x and good y) and the consumer faces the following prices. The price of commodity x is $1 each. The price of commodity y is $2 each if strictly less than 2 units are purchased. If 2 or more units are purchased, it is $1.50 each. If the consumer has an income of $10, show that the budget set faced by the consumer is not a convex set.