Use Cramer's rule to compute the solution of the system 4x, + 3x₂=17 3x₁ + 5%₂=21 What is the solution of the system?
4x₁ + 3x₂ = 17
3x₁ + 5x₂ = 21

The two points given are (3/10 - 1/2) and (1/5 . 1/5). Here is how to find the slope of the line containing these two points:The slope of the line containing the two points is -70. Therefore, CV.

Step 1: Assign x₁, y₁, x₂, y₂ to the two points respectively. In this case: x₁ = 3/10, y₁ = -1/2, x₂ = 1/5, y₂ = 1/5.Step 2: Apply the slope formula. The slope of the line containing the two points is given by:(y₂ - y₁) / (x₂ - x₁)Step 3: Substitute the values into the formula and simplify as much as possible.(1/5 - (-1/2)) / (1/5 - 3/10)= (1/5 + 1/2) / (2/10 - 3/10)= (1/5 + 1/2) / (-1/10)= (2/10 + 5/10) / (-1/10)= 7 / (-1/10)Step 4: Simplify the expression by dividing the numerator and denominator by the common factor of 7.7 / (-1/10) = -70. The slope of the line containing the two points is -70. Therefore, CV.

To know more about  slope of the line   visit:

https://brainly.com/question/16180119

#SPJ11

There are two ways to detect whether numerical data comes from a population with a normal distribution are  histogram and normal probability plots.

There are two ways to detect whether numerical data comes from a population with a normal distribution. These two ways are histogram and normal probability plots.

How to detect whether numerical data comes from a population with a normal distribution:

Histograms: Histograms are graphical representations of data distributions. The histogram is a bar chart that shows the frequencies of a variable that has been grouped into a set of continuous intervals or bins.

Normal probability plots: A normal probability plot is a graphical method for assessing whether the data comes from a normal distribution. In a normal probability plot, the data is plotted against theoretical quantiles of the normal distribution.

If the data comes from a normal distribution, the points will form a straight line.

Know more about the normal distribution

https://brainly.com/question/4079902

#SPJ11

To calculate the z-score corresponding to a given book length, we can use the formula: z = (x - μ) / σ

where:

x is the given book length,

μ is the mean length of the books (450 pages),

σ is the standard deviation of the book lengths (100 pages), and

z is the z-score.

Let's calculate the z-scores for each of the given book lengths:

a. For 180 pages:

z = (180 - 450) / 100 = -2.7

b. For 380 pages:

z = (380 - 450) / 100 = -0.7

c. For 515 pages:

z = (515 - 450) / 100 = 0.65

d. For 400 pages:

z = (400 - 450) / 100 = -0.5

e. For 640 pages:

z = (640 - 450) / 100 = 1.9

So the z-scores for the given book lengths are:

a. -2.7

b. -0.7

c. 0.65

d. -0.5

e. 1.9

Learn more about Mean here -: brainly.com/question/1136789

#SPJ11

a) To find the probability density function (pdf) of Y, we use the transformation method. Let's find the cumulative distribution function (CDF) of Y first.

The CDF of Y is given by:

Fy(y) = P(Y ≤ y) = P(X¹ ≤ y) = P(X ≤ y^(1/2)) [since Y = X¹]

We can substitute the given pdf of X and calculate the CDF:

Fy(y) = ∫[0, y^(1/2)] (30/(70-1)(x^2 - 16 - 21/2)) dx

Integrating this expression will give us the CDF of Y. Then, to find the pdf of Y, we differentiate the CDF with respect to y:

fy(y) = d/dy Fy(y)

b) To find the pdf of the sum Y₁ + Y₂, we can use the convolution formula. The convolution of two independent random variables Y₁ and Y₂ is given by:

fY₁+Y₂(w) = ∫[-∞, ∞] fY₁(u) fY₂(w-u) du

Using the pdf obtained in part (a), we substitute it into the convolution formula and integrate to find the pdf of the sum Y₁ + Y₂.

c) The moment generating function (mgf) of a random variable is given by:

My(t) = E[e^(tX)]

To find the mgf of Y₁ + Y₂, we can use the fact that the mgf of the sum of independent random variables is the product of their individual mgfs. Since Y₁ and Y₂ have the same distribution as Y, we can write the mgf of Y₁ + Y₂ as:

My₁+₂(t) = (My(t))^2

Substitute the expression for My(t) obtained from the pdf in part (a) and simplify to find the mgf of Y₁ + Y₂.

To determine the values of t when the mgf does not exist, we need to check if there are any values of t for which the integral defining the mgf converges or diverges. If the integral diverges, the mgf does not exist for that particular value of t.

Learn more about probability density function here:

https://brainly.com/question/30403935

#SPJ11

The final solutions by Laplace Transform are as follows:

s³ Y(s) - s² - 4s + 2s² Y(s) - 4sY(s) + Y(s) + (6/(s²-9)) - (5/(s²+9))Y(s) = 1

Y(s) = (6/(s²-9)) - (5/(s²+9)) + s²Y(s) - 3s + 4

Here are the Laplace Transforms of the following expressions;

dt²y - 2dy/dt = 5 with y(0) = 0 and y'(0) = 5.

The Laplace Transform of dt²y is L{dt²y} = s² Y(s) - s y(0) - y'(0).

The Laplace Transform of 2dy/dt is L{2dy/dt} = 2sY(s) - y(0).

The Laplace Transform of 5 is L{5} = 5/s.

Substituting in the given values, we get the following:

s² Y(s) - s(0) - 5 + 2sY(s) = 5/s(s² + 2s)

Y(s) = 5/(s(s² + 2s)) + s(0) + 5 = 5/s - 5/(s+2) + 5

Y(s) = 5/s - 5/(s+2) + 5/s(s² + 2s)

Y(s) = (5/s) - (5/(s+2)) + (5/(s(s²+2s)))

dt²y + 4dy/dt + 5y = e^t with y(0) = 3 and y'(0) = 10.

The Laplace Transform of dt²y is L{dt²y} = s² Y(s) - s y(0) - y'(0).

The Laplace Transform of 4dy/dt is L{4dy/dt} = 4s Y(s) - y(0).

The Laplace Transform of 5y is L{5y} = 5 Y(s).

The Laplace Transform of e^t is L{e^t} = 1/(s-1).

Substituting in the given values, we get the following:

s² Y(s) - s(3) - 10 + 4s

Y(s) + 5 Y(s) = 1/(s-1)

Y(s) = (1/(s-1))/(s² + 4s + 5) + 3s/(s²+4s+5) + 10/(s²+4s+5) + (4/(s²+4s+5)) - (5/(s²+4s+5))y + 2

dy/dt + t sinh 3t - 5 cosh 3t = 0 with y(0) = 1, y'(0) = 4, and y''(0) = -2.

The Laplace Transform of y is Y(s), the Laplace Transform of dy/dt is sY(s) - y(0) = sY(s) - 1, and the Laplace Transform of d²y/dt² is s²Y(s) - sy(0) - y'(0) = s²Y(s) - 4s + 2.

Substituting these values, we get the following:

s³ Y(s) - s² - 4s + 2s² Y(s) - 4sY(s) + Y(s) + (6/(s²-9)) - (5/(s²+9))Y(s) = 1Y(s) = (6/(s²-9)) - (5/(s²+9)) + s²Y(s) - 3s + 4

To know more about Laplace visit:

brainly.com/question/30759963

#SPJ11

Yes, it is possible to create a linear function that is not an arithmetic sequence when its domain is restricted to the positive integers.

Explanation:An arithmetic sequence is a sequence of numbers such that the difference between consecutive terms is constant. For example, the sequence 2, 4, 6, 8, 10 is an arithmetic sequence with a common difference of 2.However, not all linear functions are arithmetic sequences. A linear function is defined by the equation y = mx + b, where m is the slope and b is the y-intercept. If m is a non-integer constant, then the function will not be an arithmetic sequence.Let's consider the function y = (1/2)x + 1. When x = 1, y = 3/2; when x = 2, y = 2; when x = 3, y = 5/2; and so on. This function is linear, but it is not an arithmetic sequence. Therefore, it is possible to create a linear function that is not an arithmetic sequence when its domain is restricted to the positive integers.

to know more about arithmetic visit:

https://brainly.in/question/5492940

#SPJ11

Yes, it is possible to create a linear function that is not an arithmetic sequence when its domain is restricted to the positive integers.

An arithmetic sequence is a sequence of numbers such that the difference between consecutive terms is constant. For example, the sequence 2, 4, 6, 8, 10 is an arithmetic sequence with a common difference of 2. However, not all linear functions are arithmetic sequences.

A linear function is defined by the equation y = mx + b, where m is the slope and b is the y-intercept. If m is a non-integer constant, then the function will not be an arithmetic sequence.

Let's consider the function y = (1/2) x + 1. When x = 1, y = 3/2; when x = 2, y = 2; when x = 3, y = 5/2; and so on. This function is linear, but it is not an arithmetic sequence.

Therefore, it is possible to create a linear function that is not an arithmetic sequence when its domain is restricted to the positive integers.

To know more about arithmetic visit:

https://brainly.com/question/16415816

#SPJ11

(a)The value of the integral for |z²| = 2 is 2[tex]\pi[/tex].

(b)The value of the integral for |z| = 4 is 64[tex]\pi[/tex](32³ + 36).

What is integration?

Integration is a fundamental concept in calculus that involves finding the integral of a function. It is the reverse process of differentiation and allows us to determine the accumulated change or the total quantity represented by a function over a specific interval.

To find the value of the given integral, we will evaluate it separately for each part:

(a) |z²| = 2:

To parameterize the circle |z²| = 2, we can write z as[tex]z =\sqrt{2}e^{it}[/tex], where t is the parameter ranging from 0 to 2π. Therefore, [tex]dz =\sqrt{2}ie^{it}dt.[/tex]

Substituting the parameterization into the integral, we have:

∮(|z²| + 2(2 - 1)(z² + 9) - dz = ∮(2 + 2(2 - 1)[tex](2e^{2it}+ 9)\sqrt{2}ie^{it}dt[/tex].

Expanding and simplifying the integral, we get:

∮[tex](2 + 4(2e^{2it}+ 9)\sqrt{2}ie^{it}dt[/tex]= 2∮(1 +[tex]4e^{2it} + 36\sqrt{2}ie^{it})dt.[/tex]

Now, we integrate each term separately:

∫1 dt = t, ∫[tex]4e^{2it}dt = 2e^{2it}[/tex], ∫36[tex]\sqrt{2}ie^{it}dt = 36\sqrt{2}ie^{it}.[/tex]

Evaluating the integrals over the range 0 to 2[tex]\pi[/tex], we have:

[tex]2\pi+ 2e^{4\pi i} - 2e^{0}+ 36\sqrt{2}i(e^{2\pi i} - e^{0}).[/tex]

Simplifying further, we get: 2[tex]\pi[/tex] + 2 - 2 + 36[tex]\sqrt{2}[/tex]i(1 - 1) = 2[tex]\pi[/tex].

Therefore, the value of the integral for |z²| = 2 is 2[tex]\pi[/tex].

(b) |z| = 4:

Using a similar approach, we can parameterize the circle |z| = 4 as

[tex]z = 4e^{it}[/tex], where t ranges from 0 to 2π. Consequently, [tex]dz = 4ie^{it}dt[/tex].

Substituting the parameterization into the integral, we have: ∮(32³ + 2(2 - 1)(z² + 9) - dz = ∮(32³ + 2(2 - 1)[tex](16e^{2it}+ 9)4ie^{it}[/tex]dt.

Expanding and simplifying the integral, we get:

∮(32³ + 2(2 - 1)[tex](16e^{2it}+ 9)4ie^{it}dt[/tex] = ∮(32³ +[tex]2(32e^{2it}+ 18)4ie^{it}[/tex]dt.

Integrating each term separately, we have:

∫32³ dt = 32³t, ∫2([tex]32e^{2it}+[/tex] 18)4i[tex]e^{it}[/tex]dt = 8i(32[tex]e^{2it}[/tex] + 18)t.

Evaluating the integrals over the range 0 to 2π, we have:

32³(2[tex]\pi[/tex] - 0) + 8i(32[tex]e^{4\pi i}[/tex]+ 18)(2[tex]\pi[/tex] - 0).

Simplifying further, we get:

32³(2[tex]\pi[/tex]) + 8i(32 - 32 + 36)(2[tex]\pi[/tex]) = 64[tex]\pi[/tex](32³ + 36).

Therefore, the value of the integral for |z| = 4 is 64[tex]\pi[/tex](32³ + 36).

To learn more about integration from the given link

brainly.com/question/30094386

#SPJ4

If a value is missing in a paired t-test, the common approach is to exclude that pair from the analysis, and the issue of missing values does not directly relate to false discovery; false discovery pertains to the risk of erroneously identifying a significant result when there is no true effect or difference, typically in the context of multiple hypothesis testing.

When performing a paired t-test, if one of the values for a pair is missing, the common practice is to exclude that pair from the analysis. In other words, the pair with the missing value is not considered in the calculation of the paired differences used in the t-test.

Regarding false discovery, it's important to note that the concept of false discovery is typically associated with multiple hypothesis testing, rather than specifically with missing values. False discovery occurs when a statistically significant result is declared, but it is actually a false positive or a Type I error.

If a value is missing in a paired t-test, excluding that pair from the analysis may affect the statistical power and precision of the test, but it doesn't directly relate to false discovery. False discovery is primarily concerned with the interpretation of statistical significance in the context of multiple tests or comparisons. It relates to the likelihood of erroneously identifying a significant result when there is no true effect or difference.

To determine the potential for false discovery in a paired t-test, it is necessary to consider the overall study design, sample size, alpha level, and the number of hypothesis tests conducted. Adjustments, such as the Bonferroni correction or false discovery rate control, can be applied to address multiple testing issues and minimize the risk of false discoveries.

To know more about paired t-test,

https://brainly.com/question/31582423

#SPJ11

a. The domain of the function is (-∞, 5].

b.  The domain of the function is (-∞, 0) ∪ (0, 1) ∪ (1, ∞)

c.  The domain of the function is [1, 2) ∪ (2, -3) ∪ (-3, ∞)

Problem 5.

a. the domain of the function is (-∞, 2) ∪ (2, ∞)

b. when x = 2, the value of f(x) is 5, indicating that 5 is in the range of f.

c. Since x has no solution, number 3 is not in the range of f.

(a) For the function y = √(5 - x), the radicand (5 - x) must be non-negative, since we cannot take the square root of a negative number. Therefore, we have the inequality:

5 - x ≥ 0

Solving this inequality, we find:

x ≤ 5

Hence, the domain of the function is (-∞, 5].

(b) For the function y = (2x - 1)/(x² - x), the denominator cannot be equal to zero, as division by zero is undefined. Therefore, we have the equation:

x² - x ≠ 0

Factoring the quadratic, we get:

x(x - 1) ≠ 0

Setting each factor not equal to zero, we find:

x ≠ 0, x ≠ 1

Hence, the domain of the function is (-∞, 0) ∪ (0, 1) ∪ (1, ∞).

(c) For the function y = √(x - 1)/[(x - 2)(x + 3)], the radicand (x - 1) must be non-negative, and the denominator (x - 2)(x + 3) cannot be equal to zero. Therefore, we have the following conditions:

x - 1 ≥ 0       (x - 1 must be non-negative)

x - 2 ≠ 0       (x - 2 cannot be zero)

x + 3 ≠ 0       (x + 3 cannot be zero)

Solving these conditions, we find:

x ≥ 1         (x must be greater than or equal to 1)

x ≠ 2         (x cannot be equal to 2)

x ≠ -3        (x cannot be equal to -3)

Hence, the domain of the function is [1, 2) ∪ (2, -3) ∪ (-3, ∞).

Problem 5:

(a) For the function f(x) = (3x + 6)/(x - 2), the denominator (x - 2) cannot be equal to zero. Therefore, we have the condition:

x - 2 ≠ 0

Solving this condition, we find:

x ≠ 2

Hence, the domain of the function is (-∞, 2) ∪ (2, ∞).

(b) To show that the number 5 is in the range of f, we need to find a number x such that (3x + 6)/(x - 2) = 5. Solving this equation, we have:

3x + 6 = 5(x - 2)

3x + 6 = 5x - 10

10 - 6 = 5x - 3x

4 = 2x

x = 2

Therefore, when x = 2, the value of f(x) is 5, indicating that 5 is in the range of f.

(c) To show that the number 3 is not in the range of f, we need to prove that there is no value of x that satisfies (3x + 6)/(x - 2) = 3. However, when we solve this equation, we get:

3x + 6 = 3(x - 2)

3x + 6 = 3x - 6

6 = -6

This equation leads to a contradiction, which means that there is no solution for x. Hence, the number 3 is not in the range of f.

Learn more on domain of a function here;

https://brainly.com/question/17121792

#SPJ4

The integral can be evaluated by making a change of variables. The appropriate change of variables is u = 4x - y and v = x - 5y.



To evaluate the given integral using a change of variables, we need to find a suitable transformation that simplifies the integrand and the region of integration. In this case, the appropriate change of variables is u = 4x - y and v = x - 5y. To determine the new limits of integration, we solve the system of equations formed by the four lines that enclose the region R. The equations are x - 5y = 0, x - 5y = 1, 4x - y = 5, and 4x - y = 9. Solving this system, we find the new limits of integration for u and v.

Next, we compute the Jacobian determinant of the transformation, which is the determinant of the matrix of partial derivatives of u and v with respect to x and y. The Jacobian determinant is given by |J| = (1/(-19)). Finally, we substitute the new variables and the Jacobian determinant into the integral expression and evaluate the integral over the new region of integration.

To learn more about matrix click here

brainly.com/question/28180105

#SPJ11

To find the quotient of P(x) and D(x) using long division, we have to divide

[tex]10x^3 + x^2 - 21x + 9 by 5x - 7.[/tex]

Long division is a method of dividing polynomials and it's used to find the quotient and the remainder when dividing one polynomial by another.

The dividend is written in decreasing order of powers of the variable.

Divide [tex]10x^3 by 5x to get 2x^2[/tex],

then write this above the line.

Multiply [tex]2x^2 by 5x - 7[/tex] to get[tex]10x^3 - 14x^2[/tex].

Write this below the first polynomial.

Subtract [tex]10x^3 - 10x^3[/tex] to get 0 and

[tex]-21x - (-14x^2)[/tex] to get [tex]-21x + 14x^2[/tex].

Bring down the next term which is 9.

Multiply[tex]2x^2 by 5x[/tex] to get[tex]10x^2[/tex]

write this above the line.

Multiply [tex]2x^2[/tex] by -7 to get -14x, then write this below the second polynomial.

Add -21x and 14x^2 to get [tex]14x^2 - 21x[/tex].

Subtract -14x and -14x to get 0, then bring down the next term which is 9.

Divide [tex]14x^2[/tex]by 5x to get 2x, then write this above the line.

Multiply 2x by [tex]5x - 7[/tex] to get [tex]10x - 14[/tex].

Write this below the third polynomial. Subtract 9 and -14 to get 23. Since 23 is a constant,

[tex]P(x) =[/tex][tex]10x^3 + x^2 - 21x + 9D(x) = 5x - 7[/tex]and

[tex]P(x)/D(x) = Q(x) + R(x)/D(x)= 2x^2 + 2x - 3 + 23/(5x - 7).[/tex]

To know more about polynomial visit:-

https://brainly.com/question/11536910

#SPJ11

The average inventory cost per unit for A.O. Smith is approximately $1.47.

To calculate the average inventory cost per unit for A.O. Smith, we can use the following formula:

Average Inventory Cost per Unit = (Inventory Value / COGS) * Average Holding Cost per Unit

Given:

Inventory Value = $163.4 million

COGS = $1,233 million

Average Holding Cost per Unit = $11.08

Substituting these values into the formula:

Average Inventory Cost per Unit = (163.4 / 1233) * 11.08

Calculating the result:

Average Inventory Cost per Unit = (0.1326) * 11.08 = $1.469608

Rounding the answer to the nearest $0.01:

Average Inventory Cost per Unit ≈ $1.47

Therefore, the average inventory cost per unit for A.O. Smith is approximately $1.47.

Learn more about average inventory cost

brainly.com/question/21894699

#SPJ4

In the given equation F = kQ₁Q₂, we are given the values k = 9.0 x 10%, Q₁ = 7 x 10⁶, and Q₂ = 8 x 10⁻⁶. We need to find the value of F.

To find the value of F, we can substitute the given values into the equation F = kQ₁Q₂ and evaluate it. F = (9.0 x 10%)(7 x 10⁶)(8 x 10⁻⁶) = (9.0 x 10⁻¹)(7 x 10⁶)(8 x 10⁻⁶) = 9.0 x 7 x 8 x 10⁻¹⁻⁶⁺⁻⁶ = 504 x 10⁻¹⁰ = 5.04 x 10⁻⁹. Therefore, the value of F is 5.04 x 10⁻⁹.

To know more about equation here: brainly.com/question/29657983

#SPJ11

Using the substitution U = (2x + 1) is correct, and the statement is True.

We can set U = (2x + 1) by applying the substitution rule. We obtain dU = 2dx by dividing both sides with regard to x. When we solve for dx, we get dx = (1/2)dU.

Now, we substitute these values in the integral:

∫4(2x + 1)² dx = ∫4U² (1/2)dU

Simplifying the expression, we have:

(1/2)∫4U² dU

Now we can integrate with respect to U:

(1/2) * (4/3)U³ + C

(2/3)U³ + C

Finally, substituting back U = (2x + 1), we get:

(2/3)(2x + 1)³ + C

Therefore, using the substitution U = (2x + 1) is correct, and the statement is True.

Learn more about substitution rule here : brainly.com/question/30239667

#SPJ4

To construct a confidence interval for estimating the population variance, we can use the chi-square distribution. The formula for the confidence interval is: [(n - 1) * s^2] / chi2_lower < σ^2 < [(n - 1) * s^2] / chi2_upper where n is the sample size, s is the sample standard deviation,  σ^2 is the population variance, and chi2_lower and chi2_upper are the chi-square values corresponding to the desired confidence level.

In this case, we have a sample size of n = 90, a sample standard deviation of s = $1,869, and we want to construct a 97.3% confidence interval. Since the confidence interval is two-tailed, we need to find the chi-square values that correspond to (1 - 0.973) / 2 = 0.0135 on each tail.

Using a chi-square table or a statistical software, the chi-square value for the lower tail is approximately 60.832, and the chi-square value for the upper tail is approximately 132.535.

Substituting these values into the confidence interval formula, we get:

[(90 - 1) * (1,869)^2] / 60.832 < σ^2 < [(90 - 1) * (1,869)^2] / 132.535

Simplifying this expression, we find that the confidence interval for the population variance is approximately $94,214 < σ^2 < $169,788. Therefore, the upper bound of the confidence interval is $169,788 (rounded to the nearest whole number).

Learn more about chi-square table here: brainly.com/question/31505275

#SPJ11

Let's use the Gauss elimination method to solve the following system: \begin{align*}-3x - y + z &= 0\\2x + 4y - 5z &= -3\\x - 2y + 3z &= 1\end{align*}Firstly,

we'll express the system in the augmented matrix form as follows: \[\begin{bmatrix} -3 & -1 & 1 & | & 0\\ 2 & 4 & -5 & | & -3\\ 1 & -2 & 3 & | & 1 \end{bmatrix}\]We'll begin by using row operations to transform the matrix into a triangular form, where the leading coefficient of each row (except for the first row) is 1. $$\begin{aligned} \begin{bmatrix} -3 & -1 & 1 & | & 0\\ 2 & 4 & -5 & | & -3\\ 1 & -2 & 3 & | & 1 \end{bmatrix} &\sim \begin{bmatrix} -3 & -1 & 1 & | & 0\\ 0 & 10 & -13 & | & -3\\ 0 & -1 & 2 & | & 1 \end{bmatrix} \quad \text{(R2 + 2R1)}\\ &\sim \begin{bmatrix} -3 & -1 & 1 & | & 0\\ 0 & 10 & -13 & | & -3\\ 0 & 0 & \frac{7}{5} & | & -\frac{1}{5} \end{bmatrix} \quad \text{(R3 + (1/10)R2)} \end{aligned}$$Now, we'll use back-substitution to obtain the values of x, y, and z. \begin{align*} \frac{7}{5}z &= -\frac{1}{5} \\ \Rightarrow z &= -\frac{1}{7} \\ 10y - 13z &= -3 \\ \Rightarrow 10y - 13\left(-\frac{1}{7}\right) &= -3 \\ \Rightarrow 10y + \frac{13}{7} &= -3 \\ \Rightarrow 10y &= -\frac{34}{7} \\ \Rightarrow y &= -\frac{17}{35} \\ -3x - y + z &= 0 \\ \Rightarrow -3x - \left(-\frac{17}{35}\right) - \frac{1}{7} &= 0 \\ \Rightarrow -3x &= \frac{8}{35} \\ \Rightarrow x &= -\frac{8}{105} \end{align*}Therefore, the solution to the given system is: $$\boxed{x = -\frac{8}{105}, \, y = -\frac{17}{35}, \, z = -\frac{1}{7}}$$

To know more about Gauss elimination visit:

https://brainly.com/question/30760531

#SPJ11

The system of linear equations is given by: [tex]$$\begin{aligned}-3x - y + z &= 0 \\2x + 4y - 5z &= -3 \\x - 2y + 3z &= 1\end{aligned}$$I[/tex]n the Gauss elimination process, we try to transform the system of equations in such a way that the equations become easier to solve.

We do this by adding or subtracting the equations to eliminate one of the variables. The steps to solve the given system by using the Gauss elimination are as follows:

Step 1: Write the augmented matrix for the system. The augmented matrix for the given system is:

[tex]$$\left[\begin{array}{ccc|c}-3 & -1 & 1 & 0 \\2 & 4 & -5 & -3 \\1 & -2 & 3 & 1\end{array}\right]$$[/tex]

Step 2: Add 2 times the first row to the second row. We add 2 times the first row to the second row to eliminate the coefficient of x in the second equation. The matrix after this operation is:$$\left[\begin{array}{ccc|c}-3 & -1 & 1 & 0 \\0 & 2 & -3 & -3 \\1 & -2 & 3 & 1\end{array}\right]$$

Step 3: Add 3 times the first row to the third row. We add 3 times the first row to the third row to eliminate the coefficient of x in the third equation. The matrix after this operation is:

[tex]$$\left[\begin{array}{ccc|c}-3 & -1 & 1 & 0 \\0 & 2 & -3 & -3 \\0 & -5 & 6 & 1\end{array}\right]$$Step 4: Add $\frac{5}{2}$[/tex]times the second row to the third row.

We add $\frac{5}{2}$ times the second row to the third row to eliminate the coefficient of $y$ in the third equation.

To know more about elimination visit:

https://brainly.com/question/32403760

#SPJ11

Separation of variables means that the independent and dependent variables of the differential equation are moved to opposite sides of the equation.

When we have only one dependent variable in the equation, we usually arrange the equation in terms of that variable and its derivatives. In this case, the given differential equation is: $y = \cos (-8x) \cos(9y)$.ExplanationWe have to separate the variables first, then integrate both sides. So, let's begin with the separation of variables. By separating the variables, we get:\[\frac{1}{\cos(9y)}dy=\cos(-8x)dx\]

Summary We begin with the separation of variables by moving the independent variable to the right-hand side of the equation and the dependent variable to the left-hand side of the equation. Integrating both sides of the equation and obtaining the solution for

Learn more about variables click here:

https://brainly.com/question/28248724

#SPJ11

Answer:

3964 m^2.

Step-by-step explanation:

The area = sum of 5  rectangles

=  23*25 + 29*25 + 30*25 + 29*22 + 29*44

= 3964

The statement is true. If a function is increasing, then its derivative is greater than or equal to zero.The derivative of a function measures its rate of change.

When we talk about the increasing nature of a function, we are referring to the behavior of the function as the input values increase. A function is said to be increasing on an interval if, as the input values within that interval increase, the corresponding output values also increase.

The derivative of a function, denoted as f'(x) or dy/dx, measures the rate of change of the function at a particular point. If a function is increasing, it means that its output values are getting larger as the input values increase. Mathematically, this can be represented as f'(x) ≥ 0.

The derivative of a function gives us information about its slope or steepness at any given point. When the derivative is positive (greater than zero), it indicates that the function is increasing. When the derivative is zero, it signifies a flat region or a local maximum or minimum. However, since we are discussing the case of an increasing function, the derivative is either positive or zero.

Learn more about derivative here: https://brainly.com/question/29144258

#SPJ11

The correct answer is d. Sample data should have at least ten successes and at least ten failures.

The four assumptions for a one-population mean hypothesis test are:

1.Random Sample

2.Sample data should be either normal or have a sample size of at least 30.

3.Individuals in the sample should be independent

4.Sample data should have no less than ten successes and ten failures for hypothesis tests of proportions.

This assumption is related to the fourth assumption for a hypothesis test of proportion rather than a one-population mean hypothesis test.

Therefore, the answer is d.

Sample data should have at least ten successes and at least ten failures.

To know more about successes, visit:

https://brainly.com/question/27829227

#SPJ11

The best type of graph to show your friend the closing prices of stock shares over the past 90 trading days would be (b) a time-series graph.

A time-series graph is used to display data points collected over a period of time, making it the most suitable choice for tracking the closing prices of stock shares.

Representation of Time: A time-series graph explicitly represents time on the x-axis, allowing your friend to observe the trends and patterns in the stock prices over the 90 trading days. This enables a clear visualization of how the prices have changed over time.

Data Continuity: In a time-series graph, the data points are connected by line segments, emphasizing the continuity of the data. This is crucial for understanding the progression and flow of stock prices, providing a more accurate representation compared to other graph types.

Trend Analysis: By using a time-series graph, your friend can easily identify any long-term trends in the stock prices. They can observe if the prices have been consistently rising, falling, or fluctuating over the 90 trading days. This information is valuable for making informed investment decisions.

Seasonality and Cyclical Patterns: If there are any recurring patterns or seasonality in the stock prices, a time-series graph will help your friend identify them. They can spot regular patterns that occur at specific intervals, enabling them to make predictions or take advantage of potential opportunities.

Comparative Analysis: A time-series graph also allows for the comparison of multiple stock prices. If your friend is considering investing in different companies, they can plot the closing prices of multiple stocks on the same graph to compare their performance over time.

In summary, a time-series graph is the most suitable choice for showing your friend the closing prices of stock shares over the past 90 trading days. It provides a comprehensive and visual representation of the data, allowing for trend analysis, identification of patterns, and comparative analysis.

To learn more about time-series graph, click here: brainly.com/question/17014289

#SPJ11

we can use Eisenstein’s criterion to show that f(x) is irreducible in Z[x]. Take p=3. Then 3|3, 3|3, but 3 does not divide 9. Also, 3²=9 does not divide 9.

(a) Let f(x)=3x²+3x+9∈Z/9Z[x]. Since 3≠0 in Z/9Z, then 3 is invertible in Z/9Z. So, by Gauss’ lemma, f(x) is irreducible in Z/9Z[x] if and only if it is irreducible in Z[x].

(b) Simplifying, we get 3(a²+a+3)=0. But 3 is invertible in Z/9Z, so a²+a+3=0. Now we have to find all the solutions to the congruence a²+a+3≡0 mod 9.

We find that the congruence a²+a+3≡0 mod 3 has no solutions in Z/3Z, because the possible values of a in Z/3Z are 0, 1, 2, and for each value of a, we get a different value of a²+a+3. Hence, the congruence a²+a+3≡0 mod 9 has no solution in Z/3Z, and so it has no solution in Z/9Z.

(c) Since f(x) is a polynomial of degree 2, it is reducible over Q if and only if it has a root in Q. To check whether f(x) has a root in Q, we use the rational root theorem. The possible rational roots of f(x) are ±1, ±3, ±9. We check these values, and we find that none of them is a root of f(x).

(d) Since f(x) is a polynomial of degree 2, it is reducible over C if and only if it has a root in C. To find the roots of f(x), we use the quadratic formula:

a=3, b=3, c=9. Then the roots of f(x) are x=(-b±√(b²-4ac))/(2a)=(-3±√(-27))/6=(-1±i√3)/2. Since these roots are not in C, f(x) has no roots in C, and hence, it is irreducible in C[x].

To know more about Eisenstein’s criterion  visit :

https://brainly.com/question/30928123

#SPJ11

The answer based on the finance and share is financial profitability was 16%.

Given, shares outstanding = 91 million

Unit price = 40 euros

Price to book ratio = 3.5

Net income = 166.4 million euros

We know that the market capitalization of a company is given as:

Market capitalization = Share price x Shares outstanding

So, we can find the market capitalization of Perrigo as:

Market capitalization = 40 euros x 91 million= 3640 million euros

Now, we know that the price-to-book (P/B) ratio is given as:

Price-to-book ratio (P/B) = Market capitalization / Book value of equity

We can find the book value of equity as:

Book value of equity = Market capitalization / Price-to-book ratio= 3640 / 3.5= 1040 million euros

We can find the Return on Equity (ROE) as:

ROE = Net income / Book value of equity= 166.4 / 1040= 0.16 or 16%

Therefore, its % financial profitability was 16%.

To know more about Financial profitability visit:

https://brainly.com/question/30166283

#SPJ11

The value of n (A ∩ B) is,

⇒ n (A ∩ B) = 3

We have to given that,

Values are,

n (A) = 12

n (A ∪ B) = 18

And, n (B) = 9

We can find the value of n (A ∩ B) by using the formula,

⇒ n (A ∪ B) = n (A) + n (B) - n (A ∩ B)

⇒ n (A ∩ B) = n (A) + n (B) - n (A ∪ B)

Substitute all the values, we get;

⇒ n (A ∩ B) = 12 + 9 - 18

⇒ n (A ∩ B) = 21 - 18

⇒ n (A ∩ B) = 3

Therefore, The value of n (A ∩ B) is,

⇒ n (A ∩ B) = 3

Learn more about the combination visit:

brainly.com/question/28065038

#SPJ4

the equation of the plane that passes through the point (2, - 14) and is parallel to the vector (1, 1, 4) is given by:r.(1, 1, 4) = p.(1, 1, 4) => x + y + 4z = 2 + 14 + 4( - 2) => x + y + 4z = 6. Therefore, the equation of the required plane is x + y + 4z = 6.

Given equation of plane are:x - z = 2 ....(1)y + 4z = 2 ....(2)xy - 4z = 4 ....(3)We are supposed to find an equation of the plane that passes through the line of intersection of the planes (1) and (2) and is perpendicular to the plane (3).To find the line of intersection of the planes (1) and (2), we solve the two planes simultaneously. The solution is the line of intersection of the two planes.To find the solution, we first eliminate x by adding equations (1) and (2) to obtain:y + x + 4z = 4 ...(4)Similarly, we eliminate x from equations (1) and (3) to obtain:xy - z - 4z = 4 => y(z + 1) = z + 4 => y = [tex]\frac{(z + 4)}{(z + 1)}[/tex] ...(5)Now, we eliminate y from equations (4) and (5) to get an expression for z. Substituting that value of z in any of the equations, we can obtain the corresponding values of x and y. Once we have two such points, we can write the equation of the line that passes through them. That will be the line of intersection of the planes (1) and (2).Solving equations (4) and (5), we get z = - 4 or z = 2. Putting z = - 4 in equation (5), we get y = - 2.5 and putting z = - 4 and y = - 2.5 in equation (4), we get x = 0.5. Therefore, the line of intersection of the planes (1) and (2) is (0.5, - 2.5, - 4).Similarly, putting z = 2 in equation (5), we get y = 2 and putting z = 2 and y = 2 in equation (4), we get x = - 2. Therefore, the line of intersection of the planes (1) and (2) is (- 2, 2, 2).We know that the equation of the plane that passes through a point A(x₁, y₁, z₁) and is perpendicular to a vector n = (a, b, c) is given by:a(x - x₁) + b(y - y₁) + c(z - z₁) = 0Therefore, the equation of the plane that passes through the line of intersection of the planes (1) and (2) and is perpendicular to the plane (3) is:x - 0.5y - 2z = 1 ...(6)To obtain the above equation, we first find a vector that is parallel to the line of intersection of the planes (1) and (2). For that, we take the cross-product of the normals to the planes (1) and (2) as follows:n₁ × n₂ = (1, 0, - 1) × (0, 4, 1) = (4, 1, 4)Now, we find a point on the line of intersection of the planes (1) and (2). One such point is (0.5, - 2.5, - 4).Therefore, the required plane is 4x + y + 4z = 14.Therefore, we found the required equation of the plane. The equation of the plane is x + y + 4z = 6.

To know more about equation of the plane visit:

brainly.com/question/32163454

#SPJ11

We are required to find the value of csc(x) for sin(x) = 2√5/5.

We can begin by using the Pythagorean identity which states that:

sin^{2}x+cos^{2}x = 1

Squaring the given value of sin(x), we get:

(sinx)^2 = (\frac{2√5}{5})^2 = \frac{20}{25} = \frac{4}{5}

Solving for cos(x), we get:

cosx = \pm \sqrt{1 - (sinx)^2}

cosx = \pm \sqrt{1 - \frac{4}{5}} = \pm \frac{\sqrt{5}}{5}

We know that csc(x) is the reciprocal of sin(x), so we have:

cscx = \frac{1}{sinx}

cscx = \frac{1}{\frac{2√5}{5}} = \frac{5}{2√5}

cscx = \frac{\sqrt{5}}{2}

The value of csc(x) for sin(x) = 2√5/5 is csc(x) = sqrt(5)/2.

The other part of the question was to find cosα given that tanα = √2/2 and sinα = - √3/3.

Using the quotient identity, we have:

tan\alpha = \frac{sin\alpha}{cos\alpha}

Substituting the given values and solving for cosα, we get:

cos\alpha = \frac{sin\alpha}{tan\alpha} = \frac{-\sqrt{3}/3}{\sqrt{2}/2} = -\sqrt{\frac{3}{2}}

Therefore, cosα = -sqrt(3/2).

To know more about reciprocal visit:

brainly.com/question/27642948

#SPJ11

The geometric series 10, 2.04, 0.08 is divergent

From the question, we have the following parameters that can be used in our computation:

10, 2.04, 0.08

In the above sequence, we can see that

This means that the common ratio is less than 1

When the common ratio of a sequence is less than 1, then the geometric series is divergent.

Hence, the geometric series is divergent

Read more about sequence at

https://brainly.com/question/30499691

#SPJ1

To eliminate the ys in the system of equations, we need to add the equations

From the question, we have the following parameters that can be used in our computation:

5x + 3y = 9

4x - 3y = 9

To eliminate the ys in the system of equations, we multiply the equations by 1

So, we have

5x + 3y = 9

4x - 3y = 9

Next, we add the equations

9y = 18

Hence, the new equation is 9y = 18

Read more about equation at

brainly.com/question/148035

#SPJ1

The Newton's Forward Interpolation Formula is given by:

$$y_{n} = y_{n-1} + \frac{(x-x_{n-1})}{h}(\Delta y)_{n-1} + \frac{(x-x_{n-1})(x-x_{n-2})}{2!h^{2}}(\Delta^{2}y)_{n-2} + ...+ \frac{(x-x_{n-1})(x-x_{n-2})...(x-x_{n-k+1})}{k!h^{k}}(\Delta^{k}y)_{n-k+1}$$

Where,$h = x_{i+1}-x_{i}$ and $\Delta^{k}y$ is the k-th forward difference of y.

Let's find the value of $\Delta y$.

For the first order difference,$$\Delta y_{1} = y_{1} - y_{0}$$$$\Delta y_{2} = y_{2} - y_{1}$$$$\Delta y_{3} = y_{3} - y_{2}$$$$\Delta y_{4} = y_{4} - y_{3}$$

The table below is the given data.

$$ \begin{array}{|c|c|} \hline x & y\\ \hline 500 & 400\\ 510 & 600\\ 900 & 700\\ 1180 & 680\\ \hline \end{array} $$

To get $\Delta y_{1}$, we subtract the 2nd y value from the 1st y value.$$y_{1} = 600$$ $$y_{0} = 400$$$$\Delta y_{1} = y_{1} - y_{0}$$$$\Delta y_{1} = 600 - 400$$$$\Delta y_{1} = 200$$

To get $\Delta y_{2}$, we subtract the 3rd y value from the 2nd y value.$$y_{2} = 700$$ $$y_{1} = 600$$$$\Delta y_{2} = y_{2} - y_{1}$$$$\Delta y_{2} = 700 - 600$$$$\Delta y_{2} = 100$$

To get $\Delta y_{3}$, we subtract the 4th y value from the 3rd y value.

$$y_{3} = 680$$ $$y_{2} = 700$$$$\Delta y_{3} = y_{3} - y_{2}$$$$\Delta y_{3} = 680 - 700$$$$\Delta y_{3} = -20$$

Now let's substitute these values into the Newton's Forward Interpolation Formula;

$$y_{n} = y_{n-1} + \frac{(x-x_{n-1})}{h}(\Delta y)_{n-1} + \frac{(x-x_{n-1})(x-x_{n-2})}{2!h^{2}}(\Delta^{2}y)_{n-2} + ...+ \frac{(x-x_{n-1})(x-x_{n-2})...(x-x_{n-k+1})}{k!h^{k}}(\Delta^{k}y)_{n-k+1}$$

Where,$x = 470$ RPM.$h = 10$ (From the table given above)$x_{0} = 500$ RPM$y_{0} = 400$ hp$\Delta y_{1} = 200$ hp$\Delta y_{2} = 100$ hp$\Delta y_{3} = -20$ hp

Now,$$y_{1} = y_{0} + \frac{(x-x_{0})}{h}\Delta y_{1}$$$$y_{1} = 400 + \frac{(470 - 500)}{10}200$$$$y_{1} = 360$$ $$y_{2} = y_{1} + \frac{(x-x_{1})}{h}\Delta y_{2}$$$$y_{2} = 360 + \frac{(470 - 510)}{10}100$$$$y_{2} = 710$$ $$y_{3} = y_{2} + \frac{(x-x_{2})}{h}\Delta y_{3}$$$$y_{3} = 710 + \frac{(470 - 900)}{10}(-20)$$$$y_{3} = 584$$

Therefore, the power of engine for 470 revolutions per minute is approx 584 hp.

To know more about Interpolation Formula visit:

brainly.com/question/30766137

#SPJ11

The power of engine for 470 revolutions per minute is 584 hp.

The Newton's Forward Interpolation Formula is given by:

[tex]$$y_{n} = y_{n-1} + \frac{(x-x_{n-1})}{h}(\Delta y)_{n-1} + \frac{(x-x_{n-1})(x-x_{n-2})}{2!h^{2}}(\Delta^{2}y)_{n-2} +[/tex] [tex]...+ \frac{(x-x_{n-1})(x-x_{n-2})...(x-x_{n-k+1})}{k!h^{k}}(\Delta^{k}y)_{n-k+1}$$[/tex]

Where, h =[tex]x_{i+1}-x_{i}[/tex] and [tex]$\Delta^{k}y$[/tex] is the k-th forward difference of y.

Let's find the value of [tex]$\Delta y$[/tex].

For the first order difference,

[tex]$$\Delta y_{1} = y_{1} - y_{0}$$$$\Delta y_{2} = y_{2} - y_{1}$$$$\Delta y_{3} = y_{3} - y_{2}$$$$\Delta y_{4} = y_{4} - y_{3}$$[/tex]

Now, we subtract the 2nd y value from the 1st y value.

[tex]$$y_{1} = 600$$ $$y_{0} = 400$$$$\Delta y_{1} = y_{1} - y_{0}$$$$\Delta y_{1} = 600 - 400$$$$\Delta y_{1} = 200$$[/tex]

and,  [tex]$\Delta y_{2}$[/tex], we subtract the 3rd y value from the 2nd y value[tex]$$y_{2} = 700$$ $$y_{1} = 600$$$$\Delta y_{2} = y_{2} - y_{1}$$$$\Delta y_{2} = 700 - 600$$$$\Delta y_{2} = 100$$[/tex]

To get [tex]$\Delta y_{3}$[/tex], we subtract the 4th y value from the 3rd y value.

[tex]$$y_{3} = 680$$ $$y_{2} = 700$$$$\Delta y_{3} = y_{3} - y_{2}$$$$\Delta y_{3} = 680 - 700$$$$\Delta y_{3} = -20$$[/tex]

Now let's substitute these values into the Newton's Forward Interpolation Formula;

[tex]$$y_{n} = y_{n-1} + \frac{(x-x_{n-1})}{h}(\Delta y)_{n-1} + \frac{(x-x_{n-1})(x-x_{n-2})}{2!h^{2}}(\Delta^{2}y)_{n-2} +[/tex] [tex]...+ \frac{(x-x_{n-1})(x-x_{n-2})...(x-x_{n-k+1})}{k!h^{k}}(\Delta^{k}y)_{n-k+1}$$[/tex]

where

x= 470

h= 10 (From the table)

x₀ = 500

y₀= 400

[tex]\\$\Delta y_{1} = 200$ \\$\Delta y_{2} = 100$ \\$\Delta y_{3} = -20$[/tex]

Now,[tex]$$y_{1} = y_{0} + \frac{(x-x_{0})}{h}\Delta y_{1}$$$$[/tex]

[tex]= 400 + \frac{(470 - 500)}{10}200$$$$[/tex]

[tex]= 360[/tex]

and, [tex]$$ $$y_{2} = y_{1} + \frac{(x-x_{1})}{h}\Delta y_{2}$$$$[/tex]

= [tex]= 360 + \frac{(470 - 510)}{10}100$$$$[/tex]

=[tex]710$$[/tex]

and, [tex]$$y_{3} = y_{2} + \frac{(x-x_{2})}{h}\Delta y_{3}$$$$y_{3} = 710 + \frac{(470 - 900)}{10}(-20)$$$$y_{3} = 584$$[/tex]

Therefore, the power of engine for 470 revolutions per minute is 584 hp.

Learn more about Interpolation Formula here:

https://brainly.com/question/30768658

#SPJ4

By demonstrating that the family (C₁, te J) is independent when equation (4.4) holds for a finite index set J, the proof establishes the independence of the family {o(C₁) = o(X₁), te J} as well.

The Factorization Criterion, Theorem 4.2.1, states that a family of random variables indexed by a set T is independent if and only if a certain condition, expressed as equation (4.4), holds for all finite subsets J ⊆ T.

This criterion establishes the necessary and sufficient condition for independence in terms of factorization. In order to prove this criterion, the concept of a 7-system is introduced. It is shown that if the family (C₁, te J), where C₁ is defined as {[X₁ ≤ x], x ∈ R}, satisfies equation (4.4) for a finite index set J, then it is an independent family.

By applying the Basic Criterion 4.1.1, it follows that the family {o(C₁) = o(X₁), te J} of random variables is also independent. Now, let's delve into the explanation of the answer. The Factorization Criterion is a theorem that establishes a condition for independence in a family of random variables. It states that the family is independent if and only if equation (4.4) holds for all finite subsets J ⊆ T.

This criterion is proven by introducing the concept of a 7-system, denoted as C₁, which consists of indicator functions of the form {[X₁ ≤ x], x ∈ R}. This 7-system satisfies two properties: (i) it forms a 7-system since the product of indicator functions can be expressed as another indicator function, and (ii) the algebra generated by C₁ is the same as the algebra generated by X₁.This is done by applying the Basic Criterion 4.1.1, which states that if a family of random variables is independent, then any function of those variables is also independent.

Therefore, the theorem concludes that the family of random variables {o(C₁) = o(X₁), te J} is independent if equation (4.4) holds for all finite subsets J, providing the factorization criterion for independence.

To learn more about Criterion, click here:

brainly.com/question/32196938

#SPJ11