Table 1.1.1. Percent Change from Preceding Period in Real Gross Domestic Product (A) (Q) on the Bureau of Economic Analysis website provides information on the percentage change in real GDP from the preceding period.
To access the data, follow the steps mentioned:
1. Go to bea.gov, the official website of the Bureau of Economic Analysis.
2. Click on the "Tools" tab located at the top of the page.
3. Select "Interactive Data" from the dropdown menu.
4. Under "National Data," click on "GDP & Personal Income."
5. Click on "Begin using the data."
6. On the left-hand side, navigate to "SECTION 1: Domestic Product and Income."
7. Click on "Table 1.1.1. Percent Change from Preceding Period in Real Gross Domestic Product (A) (Q)."
Table 1.1.1 provides valuable information on the percentage change in real GDP, which accounts for inflation, from the previous period. It allows you to analyze the growth rate of the economy over time, observe economic trends, and make comparisons between different quarters or years. This data is crucial for understanding the performance and fluctuations in the overall economic output of a country, aiding in economic analysis, forecasting, and policy-making.
Learn more about inflation here:
https://brainly.com/question/28136474
#SPJ11
If the equilibrium price for tickets to a a Bruno Mars concert is $150 each and he sells them for $100, a. Does he create a market surplus or shortage? Shortage Surplus Neither a shortage nor surplus b. Suppose scalpers buy 10,000 tickets and resell them for $150 each. How much profit do the scalpers earn?
Bruno Mars is selling his tickets at a price of $100 while the equilibrium price for tickets to a Bruno Mars concert is $150 each. This means that Bruno Mars is selling the tickets at a lower price than the equilibrium price.
So, there would be a shortage of tickets because people would demand more tickets at $100 than the supply. As a result, the demand for tickets would increase but the supply would not be enough to fulfill that demand. b. Suppose scalpers buy 10,000 tickets and resell them for $150 each. How much profit do the scalpers earn? If scalpers buy 10,000 tickets and resell them at $150 each, their total revenue would be $150 x 10,000 = $1,500,000. If scalpers initially bought each ticket for $100, then their total cost would be $100 x 10,000 = $1,000,000. Therefore, the profit scalpers earn would be the difference between the total revenue and the total cost. Hence, the profit scalpers would earn would be $1,500,000 - $1,000,000 = $500,000.
To learn more about equilibrium price, visit:
https://brainly.com/question/28527601
#SPJ11
Johnson & Johnson currently pays an annual dividend of
$4.24. If the stock is selling $167.80, what is the dividend
yield?
The dividend yield for Johnson & Johnson stock is approximately 2.52%.
The dividend yield is calculated by dividing the annual dividend per share by the stock price and multiplying by 100 to express it as a percentage. In this case, the annual dividend is $4.24, and the stock price is $167.80.
Dividend Yield = (Annual Dividend / Stock Price) * 100
Substituting the values:
Dividend Yield = ($4.24 / $167.80) * 100 = 0.0252 * 100 = 2.52%
Therefore, the dividend yield for Johnson & Johnson stock is approximately 2.52%. This means that for every dollar invested in the stock, an investor can expect to receive a dividend payment of 2.52 cents per year. The dividend yield is a measure of the return on investment through dividends and is commonly used by investors to assess the income-generating potential of a stock.
Learn more about investors, below:
https://brainly.com/question/31933294
#SPJ11
A company considers a project that will generate cash sales of P50,000 per year. Fixed costs will be P10,000 per year, variable costs will be 40% of sales, and depreciation of the equipment in the project will be P5,000 per year. Taxes are 40%. The expected annual cash flow to the company resulting from the project is a. 15,000 b. 9,000 c. 19,000 d. 14,000
A company considers a P50,000-a-year cash sales project. Variable costs will be 40% of sales, fixed costs will be P10,000, and project equipment depreciation will be P5,000. 40% tax. Therefore, the expected annual cash flow to the company resulting from the project is P9,000.
To calculate the expected annual cash flow from the project, we need to subtract the total costs from the cash sales.
Cash sales per year: P50,000
Variable costs (40% of sales): 0.4 * P50,000 = P20,000
Fixed costs per year: P10,000
Depreciation per year: P5,000
Total costs per year: Variable costs + Fixed costs + Depreciation
Total costs = P20,000 + P10,000 + P5,000 = P35,000
Net profit before taxes: Cash sales - Total costs
Net profit before taxes = P50,000 - P35,000 = P15,000
Taxes (40% of net profit before taxes): 0.4 * P15,000 = P6,000
Net profit after taxes: Net profit before taxes - Taxes
Net profit after taxes = P15,000 - P6,000 = P9,000
To know more about annual cash flow
https://brainly.com/question/24179665
#SPJ11
Please answer the following questions in no more than 500 words based on the following posed Microeconomic concept: There is an innovative and more effective new drug on the market that manages high blood pressure. The drug manufacturer has applied for and received a patent.
Describe the different type of costs to produce the drug. Categorize the costs by fixed and variable, and then indicate/describe the profit-maximizing condition.
What happens in the market for other high blood pressure drugs, that are not as effective? Consider which curve shifts and the corresponding change in equilibrium price and quantity.
Compare the equilibrium price and quantity for the drug under the patent conditions relative to if the market were opened to perfectly competitive forces. Explain the main characteristics of each market structure.
Why would you or would you not allow this new drug to be available through a patent?
In answering these questions, the student should be able to:
Demonstrate the knowledge of basic elements and concepts of microeconomics.
Identify economic resources and their use.
Differentiate production under pure competition, and monopoly but no errors in economic reasoning.
The concept discussed is about an innovative drug for treating high blood pressure. The drug manufacturer received a patent for this new drug, and hence the cost involved in its production can be categorized as fixed and variable costs.
The profit-maximizing condition suggests that the cost per unit of production should be equal to the marginal revenue.
The costs involved in the production of drugs are categorized as fixed and variable costs. The fixed costs are those that remain the same irrespective of the quantity of production, whereas the variable costs change with the level of production.
In the context of the high blood pressure drug, the fixed cost would include the expenses incurred in researching, developing, and advertising the drug.
The variable cost would involve the cost of producing each unit of the drug, such as the cost of raw materials and labor. The profit-maximizing condition suggests that the cost per unit of production should be equal to the marginal revenue.
This means that the total revenue generated by producing one more unit of the drug should be equal to the cost incurred to produce that unit.
The introduction of this new and more effective drug will impact the market for other high blood pressure drugs that are not as effective. This is because the demand for the less effective drugs will decrease as consumers switch to the new and innovative drug.
As a result, the demand curve for less effective drugs will shift to the left, leading to a decrease in the equilibrium price, and quantity.
On the other hand, the demand for the new drug is expected to increase, leading to a shift in the demand curve to the right, and hence an increase in both equilibrium price and quantity.
The equilibrium price and quantity for the new drug under the patent condition will be higher than in a perfectly competitive market.
In a perfectly competitive market, there is free entry and exit of firms, and hence, there is no monopoly, unlike in the case of a patent.
Under a patent, the manufacturer has the exclusive right to produce and sell the drug. The patent allows the manufacturer to charge a higher price than the marginal cost, leading to a higher profit margin.
In contrast, in a perfectly competitive market, the equilibrium price is equal to the marginal cost of production, and hence, the profit margin is lower.
The decision to allow the new drug to be available through a patent depends on various factors. One advantage of a patent is that it encourages innovation by providing a financial incentive to the manufacturer.
In addition, it allows the manufacturer to recover the cost involved in researching and developing the drug.
However, a patent gives the manufacturer a monopoly and hence the ability to charge a higher price than the marginal cost, leading to higher profits.
This, in turn, may lead to a high price for the consumers, making the drug less accessible and less affordable to some.
Therefore, it is a trade-off between promoting innovation and ensuring that drugs are accessible to everyone.
Learn more about monopoly here.
https://brainly.com/question/27324976
#SPJ11
What is the value of a building that is expected to generate fixed annual cash flows of $2,257.00 every year for a certain amount of time if the first annual cash flow is expected in 3 years and the last annual cash flow is expected in 9 years and the appropriate discount rate is 16.30 percent? $6679.93(plus or minus $10) $5245.13 (plus or minus $10) O $6100.08 (plus or minus $10) O $5743.71 (plus or minus $10) O None of the above is within $10 of the correct answer
To calculate the value of the building, we need to find the present value of the fixed annual cash flows, the value of the building, based on the given cash flows and discount rate, is approximately $6,679.93.
The formula for the present value of an annuity is:
PV = CF * [1 - (1 + r)^(-n)] / r
Where:
PV is the present value of the annuity
CF is the fixed annual cash flow
r is the discount rate
n is the number of years
In this case, the fixed annual cash flow is $2,257.00, the discount rate is 16.30%, and the cash flows are expected for a period of 9 - 3 = 6 years.
Let's substitute the values into the formula:
PV = $2,257.00 * [1 - (1 + 0.163)^(-6)] / 0.163
By performing the calculation, we find:
PV ≈ $5,721.85
Therefore, the value of the building, given the specified cash flows and discount rate, is approximately $5,721.85. None of the provided answer options are within $10 of the correct answer.
To know more about cash click the link below:
brainly.com/question/31086376
#SPJ11
Objectives of auditing. (Clear and
detailed objectives were given on auditing)
The objectives of auditing are to provide independent assurance on the reliability and accuracy of financial statements, to ensure compliance with laws and regulations, and to identify and assess risks within an organization's operations.
Auditing aims to enhance the credibility and transparency of financial information and contribute to the overall effectiveness and efficiency of business operations. The primary objective of auditing is to provide independent assurance to stakeholders that the financial statements of an organization present a true and fair view of its financial position and performance. Auditors examine the financial records, transactions, and internal controls of an entity to verify the accuracy and reliability of the information presented in the financial statements. This helps to instill confidence in investors, shareholders, creditors, and other stakeholders who rely on the financial statements for decision-making. Another objective of auditing is to ensure compliance with laws, regulations, and accounting standards. Auditors assess whether the organization has followed applicable laws and regulations, such as tax regulations and industry-specific regulations. They also review the organization's adherence to accounting principles and standards, such as the Generally Accepted Accounting Principles (GAAP) or International Financial Reporting Standards (IFRS). Additionally, auditing aims to identify and assess risks within an organization's operations. Auditors evaluate the internal control systems and risk management processes in place to mitigate potential risks and identify any weaknesses or vulnerabilities. This helps management and stakeholders to understand the level of risk exposure and make informed decisions to improve controls and mitigate risks effectively. Overall, the objectives of auditing go beyond simply verifying financial information. They encompass providing assurance, ensuring compliance, and contributing to risk management, thereby enhancing the credibility and transparency of an organization's financial reporting and operations.
Learn more about auditing here
https://brainly.com/question/29854826
#SPJ11
Outstanding debt of Home Depot trades with a yield to maturity of 6%. The tax rate of Home Depot is 40%. What is the effective cost of debt of Home Depot?
Effective cost of debt can be defined as the average rate that a company pays on all of its borrowings. The effective cost of debt of Home Depot is 3.6%.
It is the average of the company's cost of debt, including any discounts or premiums, interest expenses, and fees. It helps the company to understand the actual cost of borrowing after adjusting for all costs and benefits .Outstanding debt of Home Depot trades with a yield to maturity of 6%, and the tax rate of Home Depot is 40%. The effective cost of debt formula is; Effective cost of debt = Yield to maturity * (1 - tax rate)Let's use the above formula to calculate the effective cost of debt of Home Depot. Effective cost of debt = 6% * (1 - 40%)= 6% * 0.60= 3.6%Therefore, the effective cost of debt of Home Depot is 3.6%. To calculate the effective cost of debt, we use the formula: EFFECTIVE COST OF DEBT = YTM * (1 - T) Where YTM is the yield to maturity and T is the tax rate. Now let's plug in the numbers: EFFECTIVE COST OF DEBT = 6% * (1 - 0.40) EFFECTIVE COST OF DEBT = 6% * 0.60EFFECTIVE COST OF DEBT = 3.6%.
To learn more about debt, visit:
https://brainly.com/question/31011268
#SPJ11
Trek Company has the following production data for April: units transferred out 40,000 and ending work in process 5,000 units that are 100% completed for material and 40% complete for conversion costs. If unit materials cost is $4 and unit conversion cost is $7, determine the cost to be assigned to the units transferred out and the units in ending work in process.
The cost to be assigned to the 5,000 units in ending work in process is $34,000.
The total cost to be assigned to the 40,000 units transferred out will be calculated as follows:
Total Cost = (Units Transferred Out x Total Unit Cost)
Total Unit Cost = (Unit Material Cost + Unit Conversion Cost)
Total Unit Cost = ($4 + $7)
Total Unit Cost = $11
Total Cost = (40,000 x $11)
Total Cost = $440,000
Therefore, the cost to be assigned to the 40,000 units transferred out is $440,000.
The cost to be assigned to the 5,000 units in ending work in process that are 100% completed for material and 40% complete for conversion costs will be calculated as follows:
Total Cost = (Units in Ending Work in Process x Total Unit Cost)
Total Unit Cost = [(Unit Material Cost x 100%) + (Unit Conversion Cost x 40%)]
Total Unit Cost = [($4 x 100%) + ($7 x 40%)]
Total Unit Cost = ($4 + $2.80)
Total Unit Cost = $6.80
Total Cost = (5,000 x $6.80)
Total Cost = $34,000
learn more about ending work here:
https://brainly.com/question/14960599
#SPJ11
Compare customer aspects of international and domestic
shipments.
The following are the differences between international and domestic shipments' customer aspects:Time sensitivity: Time sensitivity in domestic shipments is not as critical as it is in international shipments.
The reason for this is that domestic shipments typically take a shorter amount of time, allowing for a higher degree of flexibility. International shipments, on the other hand, must adhere to strict deadlines, with little to no wiggle room.Costs: International shipments cost more than domestic ones. The reason for this is that international shipments must go through customs, and the duties and taxes associated with this can be costly. The distance of the shipment also affects the shipping costs.
The further the shipment, the higher the cost of shipment required. There may also be costs associated with regulatory compliance.Language barriers: When dealing with international shipments, language barriers may arise, making communication challenging.
Learn more about international and domestic shipments here here: https://brainly.com/question/4522793
#SPJ11
Using ABC analysis, which of these should be classified as A item/s based "Annual Usage Cost"? Unit Cost (S) Item A-101 Annual Usage (pcs) Remarks 100,000 A-106 50,000 Only 1 source (in Tibet) A-112 200 A-115 10,000 Will be replaced with new part in 2 months A-119 500 A-122 1,000 A-125 60,000 A-130 1,000 1.50 200.00 100.00 2.00 8.00 19.00 3.00 10.00 Let's say you are playing the stock market and below period 2020 data was provided. For "stock A" you use a 2 month moving average. For "stock B" you use exponential smoothing with (a = 0.3). What is the Forecast in Stock B for January 2021? Stock A Stock B Jan Feb Mar Apr May Jun Jul Aug Sep Oct Nov Dec 0.11 0.20 0.03 1.20 0.50 0.03 0.10 0.11 0.56 0.78 0.44 0.10 Jan Feb Mar Apr May Jun Jul Aug Sep Oct Nov Dec 14 8 6 9 12 16 14 8 6 4 4 Let's say you are playing the stock market and below period 2020 data was provided. For "stock A" you use a 2 month moving average. For "stock B" you use exponential smoothing with (a = 0.3). What is the Forecast in Stock A for January 2021? Stock B Stock A Jan Feb Mar Apr May Jun Jul Aug Sep Oct Nov Dec 0.11 0.20 0.03 1.20 0.50 0.03 0.10 0.11 0.56 0.78 0.44 0.10 Jan Feb Mar Apr May Jun Jul Aug Sep Oct Nov Dec 14 8 6 9 12 16 14 8 6 4 14
The forecast formula for exponential smoothing with a smoothing factor of 0.3 is:F(1) = αA(1) + (1-α) F(0) = 0.3 (14) + 0.7 (4) = 6.20F(2) = αA(2) + (1-α) F(1) = 0.3 (8) + 0.7 (6.20) = 6.14F(3) = αA(3) + (1-α) F(2) = 0.3 (6) + 0.7 (6.14) = 6.20F(4) = αA(4) + (1-α) F(3) = 0.3 (9) + 0.7 (6.20) = 6.46F(5) = αA(5) + (1-α) F(4) = 0.3 (12) + 0.7 (6.46) = 8.14F(6) = αA(6) + (1-α) F(5) = 0.3 (16) + 0.7 (8.14) = 11.00F(7) = αA(7) + (1-α) F(6) = 0.3 (14) + 0.7 (11.00) = 12.91F(8) = αA(8) + (1-α) F(7) = 0.3 (8) + 0.7 (12.91) = 11.54F(9) = αA(9) + (1-α) F(8) = 0.3 (6) + 0.7 (11.54) = 9.68F(10) = αA(10) + (1-α) F(9) = 0.3 (4) + 0.7 (9.68) = 7.48F(11) = αA(11) + (1-α) F(10) = 0.3 (4) + 0.7 (7.48) = 5.94F(12) = αA(12) + (1-α) F(11) = 0.3 (14) + 0.7 (5.94) = 9.06Therefore, the forecast for Stock B for January 2021 is 9.06.
ABC analysis refers to a technique for dividing inventory into three categories based on the level of importance. The categories include A, B, and C. Items classified as A items are typically the most critical, while those classified as C items are typically the least critical. Based on the Annual Usage Cost, item A-101 should be classified as an A item.The Annual Usage Cost is the product of the Unit Cost (S) and the Annual Usage. As a result, we can calculate the Annual Usage Cost for each item in the inventory as follows:A-101: Annual Usage Cost = 100,000 x 1.50 = 150,000A-106: Annual Usage Cost = 50,000 x 200.00 = 10,000,000A-112: Annual Usage Cost = 200 x 100.00 = 20,000A-115: Annual Usage Cost = 10,000 x 8.00 = 80,000A-119: Annual Usage Cost = 500 x 19.00 = 9,500A-122: Annual Usage Cost = 1,000 x 3.00 = 3,000A-125: Annual Usage Cost = 60,000 x 10.00 = 600,000A-130: Annual Usage Cost = 1,000 x 2.00 = 2,000. Based on the Annual Usage Cost, item A-101 has the lowest cost, indicating that it should be classified as an A item.Moving average and exponential smoothing are two of the most often employed methods for analyzing inventory data and making predictions. The following information pertains to these techniques:Moving average: The moving average is a technique for smoothing out data points over time. This is accomplished by averaging several periods' worth of data to create a single value for each period. A two-month moving average implies that each forecast is the average of the two most recent observations.Exponential smoothing: The exponential smoothing technique gives more weight to recent data points and less weight to older data points. The smoothing factor, denoted by "α," determines the weight assigned to each observation. A smoothing factor of 0.3 means that 30% of the current period's actual value and 70% of the prior period's forecast value are used to make the current forecast.Forecast in Stock A for January 2021 is 0.4. The moving average formula for a two-month period is:Forecast for January 2021 = (November 2020 + December 2020)/2 = (0.78 + 0.44)/2 = 0.61
To know more about smoothing factor visit:
https://brainly.com/question/30903943
#SPJ11
Suppose that nominal GDP was $9500000.00 in 2005 in Montgomery County Maryland. In 2015, nominal GDP was $11500000.00 in Montgomery County Maryland. The price level rose 2.00% between 2005 and 2015, and population growth was 4.25%. Calculate the following figures for Montgomery County Maryland between 2005 and 2015. Give all answers to two decimals. % a. Nominal GDP growth was See Hint Part 2 (0.5 point) b. Economic growth was See Hint Part 3 (0.5 point) c. Inflation was Part 4 (0.5 point) See Hint d. Real GDP growth was Part 5 (0.5 point) See Hint OF 120ESTIONS COMPLETED N 10 b. Economic growth was Part 3 (0.5 point) c. Inflation was Part 4 (0.5 point) d. Real GDP growth was Part 5 (0.5 point) e. Per capita GDP growth was Part 6 (0.5 point) Real per capita GDP growth was % %. See Hint See Hint See Hint See Hint
a. To calculate the nominal GDP growth, we subtract the initial nominal GDP from the final nominal GDP and divide it by the initial nominal GDP, then multiply by 100.
Nominal GDP growth = ((Final nominal GDP - Initial nominal GDP) / Initial nominal GDP) * 100
= (($11,500,000 - $9,500,000) / $9,500,000) * 100
= ( $2,000,000 / $9,500,000) * 100
= 21.05%
b. Economic growth can be calculated by adjusting the nominal GDP growth for inflation.
Economic growth = Nominal GDP growth - Inflation rate
= 21.05% - 2.00%
= 19.05%
c. The inflation rate is given as 2.00%.
d. Real GDP growth is calculated by subtracting the inflation rate from the nominal GDP growth.
Real GDP growth = Nominal GDP growth - Inflation rate
= 21.05% - 2.00%
= 19.05%
e. To calculate per capita GDP growth, we need to consider the population growth as well.
Per capita GDP growth = Real GDP growth - Population growth
= 19.05% - 4.25%
= 14.80%
Real per capita GDP growth = Per capita GDP growth - Inflation rate
= 14.80% - 2.00%
= 12.80%
Learn more about GDP visit:
brainly.com/question/30504843
#SPJ11
What is Hyundai strategy in China? Global Standardization or
localisation or transnational?
Please explain in paragraph minimum 400 words
Do not spam, otherwise I will report
Hyundai Motor Group is a multinational conglomerate that is headquartered in Seoul, South Korea. The company was established in 1967 and has since become one of the world's largest automakers. Hyundai has been active in China for several years now and has established itself as one of the leading automobile manufacturers in the country.
Hyundai's strategy in China is primarily focused on localization. The company has recognized the importance of the Chinese market and has made significant investments in research and development, manufacturing, and marketing. Hyundai has established a number of joint ventures with local Chinese companies in order to better understand the local market and to develop products that are tailored to the needs of Chinese consumers.
One of the key elements of Hyundai's localization strategy in China is the development of unique products that are designed specifically for Chinese consumers. Hyundai has invested heavily in research and development in order to better understand the needs of Chinese consumers and to develop products that are tailored to their preferences. This has allowed the company to differentiate itself from its competitors and gain a competitive advantage in the Chinese market.
Another important element of Hyundai's strategy in China is its focus on building strong partnerships with local Chinese companies. The company has established a number of joint ventures with local partners in order to better understand the local market and develop products that are tailored to the needs of Chinese consumers. This has allowed Hyundai to gain access to local expertise and to build strong relationships with key stakeholders in the Chinese market.
Overall, Hyundai's strategy in China is focused on localization. The company has recognized the importance of the Chinese market and has made significant investments in research and development, manufacturing, and marketing in order to better understand the local market and develop products that are tailored to the needs of Chinese consumers. By developing unique products and building strong partnerships with local Chinese companies, Hyundai has been able to gain a competitive advantage in the Chinese market and establish itself as one of the leading automobile manufacturers in the country.
To know more about Hyundai click here:
https://brainly.com/question/30762678
#SPJ11
7. The mini-plan is a short form of a business plan focusing heavily on market issues such as the following except a. pricing b. supporting documentation c. competition d. distribution channels
The mini-plan is a streamlined version of a business plan that places a strong emphasis on factors relating to the market.
The standard business plan has been condensed into a mini-plan. Despite covering all necessary topics, it is condensed to highlight important market-related features.
Since they are essential to comprehending the competitive environment of the organisation and its chances of success, market challenges take centre stage in the mini-plan. Pricing is a crucial factor to take into account because it has a direct impact on the positioning of the good or service in the market and its profitability. The price strategy and its justification might be described in the mini-plan.
Competition is yet another important element. Businesses may distinguish themselves from their rivals and create powerful marketing and sales strategies by identifying and evaluating their rivals.
Learn more about business plan here:
https://brainly.com/question/13160849
#SPJ11
Question Five : What can be the implications of a positively sloping indifference curve? Question Six Illustrate with Example: According to law of diminishing marginal utility, as you consume more and
The implications of a positively sloping indifference curve suggest that the individual's preferences are not consistent with the assumptions of standard economic theory.
If an indifference curve has a positive slope, it means that the individual is willing to give up more of one good to obtain more of another. This contradicts the assumption of diminishing marginal rate of substitution, which states that individuals are willing to give up less of one good for more of another as they consume more. The implications of a positively sloping indifference curve are contrary to rational decision-making and the principles of consumer choice theory.
In summary, a positively sloping indifference curve suggests that the individual's preferences are inconsistent or irrational, deviating from the standard assumptions of economic theory.
The law of diminishing marginal utility states that as an individual consumes more of a particular good or service, the additional utility or satisfaction derived from each additional unit decreases. In simpler terms, the law suggests that the more of something you consume, the less satisfaction you derive from each additional unit.
For example, let's consider a person eating slices of pizza. The first slice brings immense satisfaction as the individual is hungry and enjoys the taste. However, as they continue eating more slices, the marginal utility of each additional slice decreases. The second slice might still be enjoyable, but not as much as the first. By the time they reach the fourth or fifth slice, the individual may start feeling full and find less pleasure in consuming each subsequent slice. The law of diminishing marginal utility helps explain why people often experience diminishing satisfaction or enjoyment when they consume more and more of a particular good or service.
In conclusion, the law of diminishing marginal utility describes how the additional satisfaction or utility derived from consuming each additional unit of a good or service tends to decrease as consumption increases. This concept is applicable to various aspects of consumption and helps explain the diminishing enjoyment people often experience when they consume more of a particular item.
Learn more about good here:
https://brainly.com/question/15090683
#SPJ11
SKU, the standard deviation of demand during the lead time is 150 units, the annual demand is 10,000 units, and the order quantity is 750 units. Management says it will tolerate only one stockout per year. What safety stock should be carried? What is the average inventory? If the lead time is 2 weeks, what is the order point?
The safety stock that should be carried is approximately 349.5 units. The average inventory is approximately 1099.5 units. The order point is approximately 733.12 units.
To determine the safety stock, average inventory, and order point, we can use the following formulas:
Safety Stock = Z * Standard Deviation of Demand during Lead Time
Average Inventory = Order Quantity + Safety Stock
Order Point = Average Demand per Week * Lead Time + Safety Stock
Given:
Standard Deviation of Demand during Lead Time = 150 units
Annual Demand = 10,000 units
Order Quantity = 750 units
Management tolerance for stockouts per year = 1
Lead Time = 2 weeks
To calculate the safety stock, we need to find the Z value for a one-tailed normal distribution with a management tolerance of one stockout per year. By consulting a standard normal distribution table or using statistical software, we find that Z ≈ 2.33 for a 99% service level (1 stockout per year).
Safety Stock = 2.33 * 150 units
Safety Stock ≈ 349.5 units (rounded to the nearest whole unit)
To calculate the average inventory, we can use the formula:
Average Inventory = Order Quantity + Safety Stock
Average Inventory = 750 units + 349.5 units
Average Inventory ≈ 1099.5 units (rounded to the nearest whole unit)
To calculate the order point, we can use the formula:
Order Point = Average Demand per Week * Lead Time + Safety Stock
First, we need to calculate the average demand per week using the annual demand:
Average Demand per Week = Annual Demand / Number of Weeks in a Year
Number of Weeks in a Year = 52 (assuming a 52-week year)
Average Demand per Week = 10,000 units / 52 weeks
Average Demand per Week ≈ 192.31 units (rounded to two decimal places)
Order Point = 192.31 units/week * 2 weeks + 349.5 units
Order Point ≈ 733.12 units (rounded to two decimal places)
Therefore, the safety stock that should be carried is approximately 349.5 units. The average inventory is approximately 1099.5 units. The order point is approximately 733.12 units.
To know more about inventory, visit:
https://brainly.com/question/19053112
#SPJ11
Which of the following must be displayed prominently in a headquarters, satellite office of the establishing agent or broker, by the supervising person(s) responsible for that place of business? A. Certificate of occupancy B. College Degree
C. License of supervising person D. Professional affiliates
Option C. License of supervising person is the correct option.The license of the supervising person(s) responsible for the place of business must be displayed prominently in a headquarters or satellite office of the establishing agent or broker.
The license of the supervising person(s) is a crucial document that demonstrates their qualifications and legal authority to operate in the real estate industry. It is a requirement in many jurisdictions for individuals involved in real estate activities to hold a valid license. Displaying the license prominently in the headquarters or satellite office serves as a visual indication of compliance with regulatory requirements and provides transparency to clients and customers. On the other hand, a certificate of occupancy is a document issued by a local government agency indicating that a building complies with building codes and is suitable for occupancy.
While this certificate is important for the lawful use of the premises, it may not necessarily need to be displayed prominently in a real estate office. Items like a college degree or professional affiliates, while they may hold significance in terms of individual qualifications and affiliations, do not have specific requirements for being displayed in a real estate office. The focus is primarily on the license of the supervising person(s) as it directly relates to their authority to engage in real estate activities.
Lear more about license here: https://brainly.com/question/31370595
#SPJ11
Consider a small closed economy model with the following information Y = 100 Kali-a a=0.5 K = 144 L = 81 C = 0.75 (Y-T) I = 1200 - 300r T = 800 G= 3,000 a) (4 points) What is the equilibrium real interest rate? b) (1 point) Is the government running a budget deficit or surplus? c) (4 points) Assume now that this economy would like to trade and transitions to a small open economy. If their net exports function is given by NX = 500 - 100€, using the real interest rate you found in part a), what is the equilibrium real exchange rate? d) (1 point) What type of trade balance is this economy running at is real exchange rate?
The economy is running a trade balance of zero, indicating neither a trade surplus nor a trade deficit at the equilibrium real exchange rate.
a) To find the equilibrium real interest rate, we need to equate saving and investment. In a closed economy, saving (S) is equal to investment (I).
S = Y - C - G
S = Y - C - G
= 100 - 0.75(Y - T) - 3,000
= 100 - 0.75(100 - 800) - 3,000
= 100 - 0.75(700) - 3,000
= 100 - 525 - 3,000
= -2,425
I = 1,200 - 300r
Setting S equal to I:
-2,425 = 1,200 - 300r
Rearranging the equation:
300r = 1,200 + 2,425
300r = 3,625
r = 12.08
Therefore, the equilibrium real interest rate is approximately 12.08%.
b) To determine if the government is running a budget deficit or surplus, we need to compare government spending (G) and tax revenue (T).
Budget Balance = T - G
= 800 - 3,000
= -2,200
The budget balance is negative (-2,200), which indicates that the government is running a budget deficit.
c) To find the equilibrium real exchange rate, we need to set net exports (NX) equal to zero in a small open economy:
NX = 500 - 100€
Setting NX equal to zero:
500 - 100€ = 0
100€ = 500
€ = 5
The equilibrium real exchange rate is 5.
d) At the equilibrium real exchange rate of 5, we need to determine the trade balance.
If the net exports (NX) are positive, it implies a trade surplus. Conversely, if the net exports are negative, it implies a trade deficit.
Since the net exports function is given as NX = 500 - 100€, substituting the equilibrium exchange rate of € = 5:
NX = 500 - 100(5)
NX = 500 - 500
NX = 0
To know more about interest visit-
brainly.com/question/29347994
#SPJ11
In a Q system, average inventory: a. is relatively flat in the neighborhood of the minimum. b. is depleted at a constant rate. c. is set to cover average demand over the lead time plus the review interval.d. tends to be less than under a system of periodic review (P system).
The average inventory in a Q system tends to be less than under a system of periodic review (P system).
How does the average inventory differ between a Q system and a periodic review system?In a Q system, the average inventory is set to cover average demand over the lead time plus the review interval. This means that the inventory level is adjusted based on the expected demand during the time it takes to replenish the inventory and the frequency of reviewing and ordering. As a result, the average inventory level remains relatively flat in the neighborhood of the minimum, as option (a) suggests.
On the other hand, in a periodic review system (P system), the inventory is reviewed and replenished at fixed intervals, regardless of the actual demand level. This can lead to higher inventory levels compared to a Q system since the order quantity is often determined to cover a longer period of time. Therefore, the average inventory tends to be higher in a periodic review system, as indicated by option (d).
In a Q system, the inventory level is dynamically adjusted based on the expected demand and review intervals, resulting in a relatively flat average inventory. This approach allows for a more efficient management of inventory, minimizing excess stock while ensuring that demand can be met in a timely manner.
On the other hand, periodic review systems rely on fixed intervals, leading to potentially higher inventory levels that may not be optimal for demand fluctuations. Understanding the differences between these systems is crucial for businesses to make informed decisions regarding inventory management strategies.
Learn more about inventory
brainly.com/question/29659013
#SPJ11
QUESTION 39 Market/Product positioning seeks to put a product in a certain position in a. supermarket shelves Ob. minds of consumers C. company's cost structure company's human resources d. 00
Market/Product positioning seeks to put a product in a certain position in minds of consumers
Market/product positioning is a marketing strategy that aims to create a specific perception or image of a product or brand in the minds of consumers. It involves differentiating the product from competitors and establishing a unique position in the target market. The goal is to create a favorable and distinct perception of the product in the minds of consumers, emphasizing its unique features, benefits, or value proposition. This positioning helps consumers understand and associate the product with specific attributes, values, or benefits, which in turn influences their purchasing decisions.
Know more about Market/Product positioning here:
https://brainly.com/question/29435592
#SPJ11
to which african economic organization does south africa belong?
South Africa is a member of the African Union (AU). The African Union is a continental organization consisting of 55 member states in Africa.
It was established in 2002 and aims to promote unity, cooperation, and development among African nations. The AU focuses on various areas such as political integration, economic development, peace and security, and social progress.
South Africa, as one of the member countries, actively participates in the AU's activities, initiatives, and decision-making processes to contribute to the development and advancement of the African continent as a whole.
Learn more about cooperation here:
https://brainly.com/question/7033209
#SPJ11
Which is the least liquid asset?
A Bank account
B Corporate bond
C Common share
D Guaranteed investment certificate
Among the options provided, the least liquid asset would be a Corporate bond (option B). Liquidity refers to the ease with which an asset can be bought or sold in the market without significantly impacting its price.
In the context of the options given, let's explore each one to understand their liquidity characteristics:
A) Bank account: Bank accounts, such as checking or savings accounts, are considered highly liquid assets. They provide immediate access to funds and can be easily withdrawn or used for transactions.
B) Corporate bond: Corporate bonds are debt instruments issued by companies to raise capital. While they offer fixed interest payments over a specified period, they are typically less liquid than bank accounts. Selling corporate bonds in the secondary market may involve longer transaction times and potentially impact the bond's market price.
C) Common share: Common shares represent ownership in a company and are traded on stock exchanges. They are generally more liquid than corporate bonds as they can be bought or sold relatively quickly. However, the liquidity of common shares can vary depending on the size and popularity of the company, as well as market conditions.
D) Guaranteed investment certificate (GIC): A GIC is a type of investment product offered by banks or financial institutions. It guarantees a fixed rate of return over a specified period. While GICs can be redeemed before maturity, they often come with penalties or restrictions, which may affect their liquidity compared to bank accounts.
In summary, although all the options have varying degrees of liquidity, a corporate bond (option B) tends to be the least liquid among them due to potentially longer transaction times, market price considerations, and the need to find willing buyers in the secondary market.
To learn more about Corporate bond visit:
brainly.com/question/31532990
#SPJ11
Today the one year forward rate for the Swiss franc is SF11505/$. The spot rate is SF11626/$. The interest rate on a risk-free asset in Switzerland is 271 percent if interest rate parity exists, what is the one-year risk-free rate in the US? Multiple Choice A. 164% B. 3,03% C. 355% D. 3.79% E. 332%
The one-year risk-free rate in the US can be determined using the interest rate parity principle.
Given the one-year forward rate for the Swiss franc (SF) and the spot rate, we can calculate the expected appreciation or depreciation of the Swiss franc against the US dollar. The difference in these exchange rates can be used to estimate the interest rate differential between the two countries.
In this case, the one-year forward rate for the Swiss franc is SF11505/$, and the spot rate is SF11626/$. The difference between the forward rate and the spot rate is SF11626 - SF11505 = SF121, indicating an expected depreciation of the Swiss franc.
Now, to calculate the one-year risk-free rate in the US, we can use the interest rate parity equation:
(1 + Foreign Interest Rate) = (1 + Domestic Interest Rate) * (Forward Rate / Spot Rate)
Plugging in the given values, we have:
(1 + 2.71%) = (1 + Domestic Interest Rate) * (SF11505 / SF11626)
Solving for the Domestic Interest Rate:
Domestic Interest Rate = [(1 + 2.71%) * (SF11626 / SF11505)] - 1
Using the provided exchange rates, the one-year risk-free rate in the US is approximately 3.03%.
Therefore, the correct answer is B. 3.03%.
To learn more about depreciation click here:
brainly.com/question/30531944
#SPJ11
Under the Electronic Communications Privacy Act (ECPA), an
employer may open an employee's personal email sent on the
employer's email system.
True False
Under the Electronic Communications Privacy Act (ECPA), an employer may open an employee's personal email sent on the employer's email system.
Electronic Communications Privacy Act (ECPA) is a federal law in the United States that governs wiretapping and interception of electronic communications. ECPA regulates how companies can track and intercept electronic communication transmitted by their employees in the workplace.
The law contains three parts that apply to email accounts, stored data, and network transmissions. These parts are named Title I, Title II, and Title III of the ECPA. Title I of ECPA states that electronic communications kept in electronic storage for less than 180 days is considered protected under ECPA.
To know more about Electronic Communications visit:-
https://brainly.com/question/29584932
#SPJ11
What specific method identified in the lectures is used to fine the true, underlying symptoms of problems?
a. charting of processes (flow charts, process charts)
b. Ask why 5 times
c. statistical process control methods
d. Pareto charting
The specific method identified in the lectures that is used to find the true, underlying symptoms of problems is 'b. Ask why 5 times.'
The symptoms of problems are indicators that a problem has occurred. They may be apparent as soon as the problem appears, or they may take some time to manifest. A problem is a deviation from normal performance that has an undesirable impact on the company's operations, employees, clients, or stakeholders. Symptoms, on the other hand, are observable activities that suggest there is a problem.Ask why 5 times' is a technique for finding the underlying cause of a problem.
It entails asking 'Why?' in response to each answer given to uncover the real source of a problem. By asking why five times, the individual can obtain information that goes beyond surface-level assumptions and uncover the root cause of a problem. This method is a part of the Toyota Production System (TPS), which was created by Taiichi Ohno in the 1950s. It's also known as the "5 Whys" or "Root Cause Analysis."
Learn more about symptoms of problems here:https://brainly.com/question/8707888
#SPJ11
A Question Completion Status: 10 90 20 30 40 28 290 300 310 320 100 110 125 50 61 75 33 13 14 15 16 17 340 350 36 37 38 39 40 41 42 43 Moving to another question will save this response. Question 36 When calculating GDP using the expenditure approach, the investment component includes net investment plus depreciation. gross investment plus depreciation. net investment only. net investment minus depreciation. fixed investment minus depreciation. Moving to another question will save this response. 27 S 44 46 47 Ques 2 poin Question of so
The correct answer is "net investment plus depreciation." The explanation for this choice will be provided in the next paragraph.
When calculating GDP using the expenditure approach, the investment component includes both net investment and depreciation. Net investment refers to the change in the value of a country's capital stock, which is calculated by subtracting the depreciation (wear and tear) from the gross investment.
Gross investment represents the total investment made in an economy, including expenditures on new capital goods and changes in inventories. However, since capital goods depreciate over time, it is essential to account for the depreciation in order to measure the net increase in the capital stock accurately.
Therefore, the investment component in GDP calculation includes net investment (gross investment minus depreciation) to reflect the change in the country's capital stock while considering the effects of depreciation.
Learn more about depreciation : brainly.com/question/30531944
#SPJ11
Some insurance companies require individuals to take a blood test before qualifying for lower health insurance premiums. What market failure is being addressed here? Select an answer and submit. For keyboard navigation, use the up/down arrow keys to select an answer. a Adverse Selection of individuals with a high risk of bad health outcomes b Moral Hazard from individuals engaging in high risk activities с Negative Externality from bad health outcomes d Monopoly power held by insurance companies
The market failure being addressed in this scenario is a. Adverse Selection of individuals with a high risk of bad health outcomes.
Adverse selection occurs when individuals with higher risks or higher probabilities of negative outcomes are more likely to seek insurance coverage compared to individuals with lower risks.
This can create an imbalance in the insurance pool, as the pool becomes dominated by individuals who are more likely to make claims, leading to higher costs for insurance companies.
In the given scenario, insurance companies require individuals to take a blood test before qualifying for lower health insurance premiums.
By implementing this requirement, insurance companies aim to address adverse selection by obtaining additional information about an individual's health status.
The blood test helps identify individuals who may have pre-existing conditions or higher health risks.
Insurance companies can then adjust their premiums accordingly based on the individual's health condition, ensuring a more balanced and fair distribution of risk among policyholders.
By addressing adverse selection, insurance companies can mitigate the potential financial losses they may face due to a disproportionately high number of claims from individuals with higher health risks.
This allows for more sustainable and affordable insurance premiums for a broader population of individuals seeking coverage.
Learn more about health risks here:
https://brainly.com/question/32287324
#SPJ11
Cigarette taxes have been in the news. Federal taxes per pack increased 39 cents per pack in 2002 and the majority of states have followed with their tax increases. The result is the price of a pack of cigarettes has doubled since 1995.
A variety of reasons have pushed the tax rates up. Part of the reason is the effort to reduce smoking.
Taxpayers often wind up paying for the tobacco induced medical bills of smokers through Medicare and Medicaid. Another reason for the price increases is many tobacco companies have settled with state and local governments and agreed to pay $246 billion over 25 years into a fund to be distributed to the states. After this settlement cigarette companies raised the price of their product by $1 a pack.
There is little doubt, that despite the addictive attributes of nicotine higher prices make inroads on smoking. For every 10 per cent increase in price the number of packs sold drops by 4 per cent. Smokers have been buying cigarettes that are stronger and longer. The average tar intake Has increased among people 18-24 since the price increase. Since tar is believed to be a major cause of lung disease the rise in taxes may lead to more adverse health issues among smokers.
1.The demand for cigarettes is
(a) elastic
(b) inelastic
(c) unitary
(d) none of these.
2.Cigarette prices have increased due to
(a) Taxes alone
(b) Taxes and legal issues
(c) Taste changes
(d) None of these.
3.Using tax policy to raise the price of cigarettes is an example of
(a) forcing smokers to quit involuntarily
(b) attempting to reduce smoking through the voluntary act of smokers
(c) raising to cost of production
(d) none of these.
4.The fact that smokers are exposed to more tar since the tax increase is an example of
(a) an unintended outcome of an economic policy
(b) government policy achieves its goals
(c) the price increase curbed cigarette addiction
(d) none of these.
5.The result of the price increase was
(a) tax increases alone did not curb smoking
(b) smokers crave stronger and longer cigarettes
(c) in a free market the consumer will find a way to consume a product
(d) all of these.
6.The Tax policy
(a) raised money for the government
(b) costs the consumers more money
(c) consumers still get sick from cigarettes
(d) all of these.
1. The demand for cigarettes is inelastic.
Based on the information provided, it is mentioned that for every 10 percent increase in price, the number of packs sold drops by 4 percent. This indicates that the quantity demanded of cigarettes is not very responsive to changes in price, suggesting an inelastic demand.
2. Cigarette prices have increased due to taxes alone.
The passage states that cigarette prices increased by $1 per pack after the settlement, implying that the price increase is solely attributed to taxes.
3. Using tax policy to raise the price of cigarettes is an example of attempting to reduce smoking through the voluntary act of smokers.
Tax policies on cigarettes are commonly implemented as a means to discourage smoking. By increasing the price of cigarettes, the intention is to make smoking less affordable and ultimately reduce consumption.
4. The fact that smokers are exposed to more tar since the tax increase is an example of an unintended outcome of an economic policy.
The rise in tar intake among smokers after the tax increase is not a desired outcome of the policy. It highlights that despite the increase in price, some smokers have shifted to stronger and longer cigarettes, potentially leading to more adverse health effects.
5. The result of the price increase was all of these.
The passage suggests that the tax increases alone did not effectively curb smoking, and instead, smokers sought out stronger and longer cigarettes. This indicates that in a free market, consumers will find ways to consume the product they desire, even at higher prices.
6. The tax policy raised money for the government, cost the consumers more money, and consumers still get sick from cigarettes.
Tax policies on cigarettes serve as a revenue source for the government, as it generates additional funds through the increased taxes imposed on cigarette sales. Simultaneously, the higher prices resulting from the taxes directly impact consumers, making cigarettes more expensive. It is important to note that despite the price increase, consumers can still experience adverse health effects associated with smoking.
Learn more about inelastic visit:
brainly.com/question/30103518
#SPJ11
Required January February Beginning inventory 0 300 300 Production 1,000 800 1,250 Sales 700 800 1,500 Variable costs 900 900 $ 900 Manufacturing cost per unit produced Operating (marketing) cost per unit sold Fixed costs $ 600 $ 600 $ 600 $400,000 $400,000 $400,000 Manufacturing costs Operating (marketing) costs $140,000 $140,000 $140,000 The selling price per unit is $2,500. The budgeted level of production used to calculate the budgeted fixed manufacturing cost per unit is 1,000 units. There are no price, efficiency, or spending variances. Any production-volume variance is written off to cost of goods sold in the month in which it occurs. 1. Prepare income statements for BigScreen in January, February, and March of 2012 under (a) variable costing and (b) absorption costing
(a) Under variable costing, the income statements for Big Screen in January, February, and March 2012 (b) Under absorption costing, the income statements for Big Screen in January, February, and March 2012.
(a) In variable costing, only variable costs (direct materials, direct labor, and variable overhead) are considered as product costs. Fixed manufacturing costs are treated as period costs and are expensed in the period incurred. (b) In absorption costing, both variable and fixed manufacturing costs are considered as product costs and are allocated to the units produced. The income statement will include sales, cost of goods sold (including fixed manufacturing costs), and the resulting net income, which will be consistent across the months.
learn more about:- Manufacturing costs here
https://brainly.com/question/21306513
#SPJ11
At April 1,2000 Farm Com. purchased 10000 bonds of X company 882000 $ and paid 1000 $ as a fee to the dealer plus accrued interest at the purchases date. The bond hold 8% paid at Jan.1 and July 1,the maturity date is Jan.1, 20100 At August 1, 2005 the Farm Com. Sold 4000 bods of X Company at 95 $ per bond and paid 400 $ as selling fee. Required: 1) Prepare the entry during 2000. 2) Prepare the entry during 2005.
Amount received from sale of bonds = 4,000 bonds x $950 per bond = $3,800,000) (Selling fees = 4,000 bonds x $10 per bond = $40,000) (Gain on sale of investment = $3,800,000 - $380,000 - $33,333 - $4,000,000 = $52,000).
1) Prepare the entry during 2000 DATE ACCOUNT TITLE DEBIT CREDIT April 1, 2000 Investment in Bonds of X Company 882,000 Cash 882,000 (Assuming no interest was accrued until the purchase date) 2) Prepare the entry during 2005 DATE ACCOUNT TITLE DEBIT CREDIT AUG 1 Investment in Bonds of X Company 380,000 Gain on Sale of Investment in Bonds of X Company 52,000 Accrued Interest Receivable 16,000 Investment in Bonds of X Company 468,000 Cash 456,000 Selling Fees 400,000 Gain on Sale of Investment in Bonds of X Company 52,000 (Amount of bonds sold = 4,000 bonds x $1,000 per bond = $4,000,000) (Accrued interest = $1,000,000 x 8% x 5/12 = $33,333) (Amount received from sale of bonds = 4,000 bonds x $950 per bond = $3,800,000) (Selling fees = 4,000 bonds x $10 per bond = $40,000) (Gain on sale of investment = $3,800,000 - $380,000 - $33,333 - $4,000,000 = $52,000).
To know more about interest visit:
https://brainly.com/question/30393144
#SPJ11
That being said, here are the two topics/questions:
Sources of Software:
Discuss a specific Benefit and a specific Disadvantage you think your chosen ES has.
Clearly Enterprise Software is very important. Pick an ES (ERP, CRM, SCM, BI, etc) from the Categories of ES that relates to your major/industry.
Sources of Software:
Convenience of Implementation
Failure Risk of Implementation
Support Cost
Total Cost
Ease of Use
Percentage of Requirements Met
Given the following criteria for evaluating a software decision:
State your major, and then choose a company in your major/industry.
Evaluate where you think they rank each category (be sure to justify your rankings).
The major chosen for this question is "Healthcare." One of the companies related to this industry is "Allscripts."Allscripts is a US healthcare organization that provides healthcare organizations with information technology solutions.
The following are the rankings of the company Allscripts with respect to the software decision criteria:Convenience of Implementation:As this is an enterprise-level software, it might not be that easy to implement. But, since the company is focused on providing IT solutions to healthcare organizations, they might be experienced in implementing enterprise-level software. Therefore, the company might have ranked this criterion at the midpoint of the ranking scale.Failure Risk of Implementation:As the company might have had experience in implementing enterprise-level software, the failure risk might be relatively low. Therefore, the company might have ranked this criterion near the top of the ranking scale.Support Cost:Since the software is designed specifically for the healthcare industry, Allscripts might provide decent support. Therefore, the company might have ranked this criterion near the top of the ranking scale.Total Cost:Since the software is enterprise-level, the total cost might be quite high. Therefore, the company might have ranked this criterion near the bottom of the ranking scale.Ease of Use:Since the software is designed specifically for the healthcare industry, it might be user-friendly and easy to use. Therefore, the company might have ranked this criterion near the top of the ranking scale.Percentage of Requirements Met:As this is an enterprise-level software designed specifically for the healthcare industry, it might meet the requirements of the organizations. Therefore, the company might have ranked this criterion at the top of the ranking scale.
To know more about "Healthcare." visit:
https://brainly.com/question/19305870
#SPJ11