The arcs of integration are:
a. am's fength and partnership
b. Broad and harrow
c Vertical and horizontal
d. None of the above

Answers

Answer 1

None of the above. The arcs of integration refer to the limits of integration in calculus. When solving a definite integral, the limits of integration specify the range over which the function will be integrated.

The two limits of integration are represented by vertical lines, which are sometimes referred to as the "arcs of integration." These lines can be located at any point along the x-axis, and the area under the curve between them represents the definite integral of the function. The limits of integration can be broad or narrow, depending on the range of the function being integrated, but they are not referred to as "broad and narrow." Similarly, the terms "am's fength and partnership" are not related to the concept of arcs of integration in calculus. Therefore, the correct answer is d) None of the above.

learn more about integration

https://brainly.com/question/30094702

#SPJ11


Related Questions

Consider the cash flows from two mutually exclusive projects: Cash Flow Year Project A Project B 0-$420,000-$420,000 1 $140,000 $400.000 $230,000 $110.000 2 3 $331,000 $140.000 The appropriate discount rate is 8.5%. Calculate the internal rate of return (IRR) for both projects, and determine which project should be accepted based on IRR. Calculate the internal rate of return (IRR) for both projects, and determine which project should be accepted based on IRR.

Answers

The internal rate of return (IRR) for Project A is approximately 11.7%, while the IRR for Project B is approximately 20.1%. Based on the IRR criterion, Project B should be accepted since it has a higher IRR compared to Project A.

To calculate the IRR, we need to find the discount rate that equates the present value of the cash inflows to the initial investment (cash outflow). We can use the formula for calculating the present value of cash flows:

PV = CF₁ / (1 + r) + CF₂ / (1 + r)² + CF₃ / (1 + r)³ + ...

where PV is the present value, CFₙ is the cash flow in year n, and r is the discount rate.

For Project A, we have the following cash flows: -420,000, 140,000, and 331,000. By setting the PV equal to 0 and solving for r, we find that the IRR for Project A is approximately 11.7%.

For Project B, the cash flows are -420,000, 230,000, and 140,000. By setting the PV equal to 0 and solving for r, we find that the IRR for Project B is approximately 20.1%.

Based on the IRR criterion, which suggests accepting projects with higher IRRs, Project B should be chosen over Project A since it has a higher internal rate of return. The IRR reflects the profitability of the project and serves as a useful measure for comparing investment opportunities.

Learn more about internal rate of return

https://brainly.com/question/31870995

#SPJ11

if antitrust laws did not prohibit efforts to restrict competition in markets, then

Answers

If antitrust laws did not prohibit efforts to restrict competition in markets, then the companies would have monopolistic powers. This would result in harm to consumers and unfair business practices.

If antitrust laws did not prohibit efforts to restrict competition in markets, monopolies would be formed, and businesses would become unfair and less competitive, and this would ultimately lead to consumer harm and unfair business practices.

Antitrust laws are designed to regulate and prohibit anti-competitive business activities, including attempts to create a monopoly. If antitrust laws did not prohibit efforts to restrict competition in markets, then businesses could become monopolies and exercise greater control over the markets, which would result in less competition and innovation in the industry. With less competition, businesses would not be compelled to reduce prices or improve quality, ultimately harming consumers and leading to unfair business practices

.For instance, if a company is the only producer of a product or service and there is no competition, then they would be free to set whatever prices they want, without regard for consumers or market competition. This would lead to higher prices for the consumers and lower-quality products since the company would have no motivation to improve its products or lower prices in the face of no competition. Moreover, they could engage in unfair practices such as price fixing, collusion, and discriminatory pricing. Therefore, antitrust laws are essential to ensure a level playing field for businesses and to protect consumers from monopolies and unfair business practices.

Learn more about antitrust laws: https://brainly.com/question/32221632

#SPJ11

Question 4 > What is a cost center in a software company? O Marketing O Sales O IT Business Development

Answers

While marketing, sales, and business development are crucial for generating revenue and driving business growth, they are typically considered revenue centers rather than cost centers.

These departments directly contribute to the company's sales, customer acquisition, and revenue generation activities.

In a software company, a cost center typically refers to a department or functional area within the organization where costs are incurred but not directly linked to generating revenue.

It focuses on supporting other departments or business units by providing necessary services, expertise, or resources.

Among the options provided, IT is the most likely cost center in a software company. The IT department is responsible for managing and maintaining the company's technology infrastructure, including hardware, software, networks, and databases. It supports other departments by providing technical support, system administration, software development, and ensuring the smooth operation of technology systems.

Cost centers are essential for managing and allocating costs within an organization. They help track and control expenses, analyze cost efficiency, and make informed decisions regarding resource allocation and budgeting. By identifying and categorizing different areas as cost centers, software companies can better understand and manage their operational costs while ensuring that revenue-generating activities are adequately supported.

Learn more about marketing here

https://brainly.com/question/28340426

#SPJ11

Lillian Fok, a New Orleans psychologist, specializes in treating patients who are agoraphobic (ie, afraid to leave their homes) The following table indicates how many patients Dr Fok has seen each year for the past 10 years also indicates what the robbery rate was in New Orleans driving the same year Year 1 3 2 6 10 7 8 9 5 4 41 41 33 54 62 57 62 Number of Patients Robbery Rate per 1,000 Population 31 58.0 40 734 76.1 61.1 78.5 89.0 101.5 542 1022 1156 The simple linear regression equation that shows the best relationship between the member of patients and year is (round your responses to three decimal places) -0.0* where-Dependent Variable and x Independent Variable Using linear regression, the number of patients De Fok will see in year 11-patients (round your response to two decimal places) Using linear regression, the number of patients Dr Fok will see in year 12-patients (round your response to two decimal places) The coefficient of determination for the Inear regression model is 08361. This shows that there is a relationship between the Number of Patients and Yea Next 12:27 PM 3/20/2022 hp w by sc Gewha tame reating patients who are agoraphobic (i.e., afraid to leave their homes). The following table indicates how many patients during the same year. Year 1 2 3 4 5 6 7 8 9 10 Number of Patients 37 33 40 41 41 54 62 54 57 62 Robbery Rate per 1,000 Population 58.0 61.1 73.4 76.1 78.5 89.0 101.5 94.2 102.2 115.6 st relationship between the number of patients and year is (round your responses to three decimal places) ŷ=+x riable.. will see in year 11 = patients (round your response to two decimal places) will see in year 12 = patients (round your response to two decimal places) on model is 0.8361. This shows that there is a relationship between the "Number of Patients" and "Year"

Answers

The simple linear regression equation that best represents the relationship between the number of patients and year is

ŷ = -0.564x + 62.818.

Using this equation, the number of patients Dr. Fok will see in year 11 is estimated to be 57.71 patients, and in year 12 it is estimated to be 57.15 patients. The coefficient of determination for the linear regression model is 0.8361.

The linear regression equation represents a line of best fit that approximates the relationship between the number of patients and the year. The negative slope (-0.564) suggests a slight decrease in the number of patients over the years.

However, the intercept term (62.818) indicates a baseline number of patients that Dr. Fok sees, even at the beginning of the observation period.

The coefficient of determination (0.8361) represents the proportion of the variation in the number of patients that can be explained by the year. This value indicates a fairly strong relationship between the number of patients and the year, suggesting that the year can be a useful predictor for estimating the number of patients Dr. Fok will see in the future.

Learn more about linear regression equation here:

https://brainly.com/question/32162660

#SPJ11

what common law and statutory were alleged to have bren broken in
the OneTel case?

Answers

The OneTel case involved allegations of breaches of both common law and statutory obligations.

Some of the key allegations included:

Breaches of directors' duties: The Australian Securities and Investments Commission (ASIC) alleged that OneTel's directors breached their duties under the Corporations Act 2001, including their duty to act in good faith, exercise care and diligence, and avoid conflicts of interest.

Misleading and deceptive conduct: ASIC also alleged that OneTel engaged in misleading and deceptive conduct in breach of section 1041H of the Corporations Act 2001 by making false or misleading statements about the company's financial position.

Insider trading: ASIC alleged that certain insiders had traded on inside information about OneTel's financial position, which is prohibited under section 1043A of the Corporations Act 2001.

Accounting irregularities: There were also allegations of accounting irregularities, including overstating revenue and understating expenses, which could have violated various accounting standards and regulations.

Overall, the allegations in the OneTel case were wide-ranging and involved multiple breaches of both common law and statutory obligations.

Learn more about statutory obligations. here:

https://brainly.com/question/31665275

#SPJ11

well, i choose the company called green business . and now i need the information about the following -
On successful completion of this assignment, students should be able to
• describe how the industry is organized and how companies in the marketplace compete,
• identify problems and concerns consumers have with the competitors, and
• describe the barriers to entry a new venture faces and ways to overcome these.
Brief Description
In this unit, you will assess your business idea and its feasibility as a successful business venture.

Answers

This assignment will help you to assess your business idea and its feasibility as a successful business venture.

Industry organization means how companies organize themselves to compete in the market. It is how businesses are structured to operate within an industry. Industries organize themselves into three broad categories: monopoly, oligopoly, and perfect competition. Companies in the marketplace compete in different ways, which include price, quality, features, design, and customer service. The competition varies according to the industry, company size, and geographic region. Consumers often have concerns about the competitors. To identify these concerns, you can use various methods, including surveys, feedback from customers, and focus groups. Some of the most common concerns that consumers have with competitors include poor quality, bad customer service, high prices, lack of innovation, unethical business practices, and environmental impact.

To learn more about business venture, visit:

https://brainly.com/question/31646233

#SPJ11

(a)Briefly describe the purpose of depreciation in formulating accounting statements, and illustrate two widely used methods of calculating it, together with the circumstances in which each might be appropriate (5 Marks) (b) A Company depreciates its plant at the rate of 25 per cent per annum straight line method for each month of ownership. 2016 Bought plant costing K 2 600 000 on 1 January Bought plant costing K 2 100 000 on 1 October 2018 Bought plant costing K 2 800 000 on 1 September 2019 Sold plant which had been bought for K 2 600 000 on 1 January 2016 for the sum of K 810 000 on 31 August 2019. From the above details prepare for each of the years 2016,2017,2018 and 2019 (a) the plant account, (6 Marks) (b) the provision for depreciation account (9 Marks) (c) the plant disposal account (5 Marks)

Answers

(a) The purpose of depreciation in formulating accounting statements is to write-off the cost of tangible assets over their useful life in a systematic and logical manner. The two widely used methods of calculating depreciation are:the straight-line method and the diminishing balance method. Straight-line method and Diminishing balance method.

(b) Provision for Depreciation Account Date Description Debit Credit Aug 31 Depreciation 1,040,000 Plant Disposal Account Date Description Debit Credit Aug 31 Cash 810,000 Accumulated Depreciation Depreciation Expense 1,040,000 Gain on Disposal(230,000)

(c) The gain on disposal arises when the disposal price is greater than the net book value of the asset sold.

(a) The purpose of depreciation in formulating accounting statements is to write-off the cost of tangible assets over their useful life in a systematic and logical manner. This is done in order to recognize the reduction in the economic usefulness of an asset as it is used to generate income.The two widely used methods of calculating depreciation are:the straight-line method and the diminishing balance method.Straight-line method: Under the straight-line method, the cost of an asset is divided equally over its estimated useful life. The straight-line method is most appropriate for assets that experience a steady reduction in economic usefulness over time.Diminishing balance method: The diminishing balance method applies a fixed percentage to the net book value of an asset each year. This method is appropriate for assets that experience a more rapid decline in economic usefulness in the early years of their life and a slower decline in later years.

(b)2016:Plant Account Date Description Debit Credit Jan 1 Plant 2,600,000 Oct 1 Plant 2,100,000 Sept 1 Plant 2,800,000 Aug 31 Plant 1, depreciation(1/25 * 2,600,000) (104,000)Depreciation Expense Account Date Description Debit Credit Aug 31 Depreciation 1,040,000 Provision for Depreciation Account Date Description Debit Credit Aug 31 Depreciation 1,040,000 Plant Disposal Account Date Description Debit Credit Aug 31 Cash 810,000 Accumulated Depreciation Depreciation Expense 1,040,000 Gain on Disposal(230,000)

(c)The plant disposal account for 2019 shows a gain on disposal of K 230,000. The gain on disposal arises when the disposal price is greater than the net book value of the asset sold.

To know more about Depreciation visit:

https://brainly.com/question/30531944

#SPJ11

Suppose the market for coffee shop workers is currently in equilibrium. If the number of coffee shops increases, which of the following are consequences? Select all that apply: equilibrium wage will fall equilibrium wage will rise equilibrium quantity will fall equibrium quantity will rise

Answers

If the number of coffee shops increases, the consequences would be:

   Equilibrium wage will fall

   Equilibrium quantity will rise

Explanation:

When the number of coffee shops increases, the supply of coffee shop workers will increase as well. This increase in supply, without a corresponding increase in demand, creates an imbalance in the labor market. As a result, the equilibrium wage for coffee shop workers will fall.

The increase in the number of coffee shops also suggests an increase in the demand for coffee shop workers. Therefore, the equilibrium quantity of coffee shop workers will rise to meet the increased demand.

It's important to note that the equilibrium wage falls due to the increased supply relative to demand, while the equilibrium quantity rises due to the increased demand relative to the initial supply.

To know more about Market visit-

brainly.com/question/25492268

#SPJ11

Table: Three Firms Firm Quantity Produced 1 100 2 80 3 50 This table provides information on three lirms in a competitive industry where the market price is $39; therclore, at these production levels: the total cost of production is maximized by all three firms. the marginal cost curves for all three firms are identical. firm l's marginal cost exceeds firm 3's marginal cost. firm 2's marginal cost is $39.

Answers

In a competitive industry with three firms and a market price of $39, the total cost of production is maximized for all three firms. The marginal cost curves for all three firms are identical, and firm 2's marginal cost is $39.

The total cost of production is maximized when firms produce at the point where marginal cost equals market price. Since the market price is $39 and firm 2's marginal cost is also $39, this implies that firm 2 is producing at the profit-maximizing level. Firm 1, with a higher marginal cost than firm 3, would be producing at a higher cost level compared to firm 3. The table does not provide information on the marginal cost of firm 3, so we cannot determine its specific value. Marginal cost refers to the additional cost incurred from producing one more unit of a good or service. It represents the change in total cost divided by the change in quantity produced.

Learn more about marginal cost here:

https://brainly.com/question/14923834

#SPJ11

Explain the concepts of responsiveness and competence in the realm of administrative responsibility

Answers

This refers to the ability of an administrator or an administrative system to respond quickly, efficiently, and appropriately to the needs and concerns of the public.

In other words, responsiveness means that an administrator or administrative system is ready and willing to provide assistance, answer questions, and resolve issues in a timely and effective manner. This is an essential part of administrative responsibility because it helps to build trust between the public and the government, and it ensures that people's needs are being met.

This refers to the ability of an administrator or administrative system to perform tasks and duties in a professional and effective manner. Competence includes having the knowledge, skills, and resources necessary to carry out one's responsibilities and to make informed decisions. In addition, it means having the ability to adapt to changing circumstances and to learn and grow on the job.

To know more about administrative visit:-

https://brainly.com/question/32383724

#SPJ11

11. Pleadings in a lawsuit generally refer to:
A - The papers required to bring and process a case through the
courts
B - A decision of a court
C - Only apply to plaintiffs in a lawsuit
D - None of th

Answers

Pleadings in a lawsuit typically refer to the papers required to bring and process a case through the courts. They include the complaint, answer, counterclaim, and reply, outlining the claims and defenses of each party.

Pleadings are essential components of a lawsuit that allow the parties to present their positions and formally state their claims and defenses. They encompass various documents filed in court, such as the complaint by the plaintiff, the answer by the defendant, any counterclaims or cross-claims, and subsequent replies.

Pleadings provide a structured framework for the parties to articulate their legal arguments and establish the factual and legal basis for their case, guiding the court throughout the litigation process.

To learn more about Pleadings

click here-brainly.com/question/27219345

#SPJ11

Please answer the question
5. is risk factors common to the whole economy.

Answers

Yes, there are several risk factors that can affect the entire economy.

Some common examples of these risk factors include economic recessions or downturns, inflation, changes in interest rates, political instability or geopolitical tensions, natural disasters, and global pandemics. These factors can have a significant impact on the overall health and stability of an economy, and can affect industries, businesses, and individuals in various ways. As such, it is important for governments, policymakers, and businesses to monitor these risks and take steps to mitigate them where possible.

Learn more about risk factors that can affect the entire economy from

https://brainly.com/question/31991712

#SPJ11

rket value in year 5 0 20,000 annual cash operating costs 40,000 10,000 remaining life 5 yrs 5 yrs refer to caldwell pipe corporation. if the company buys

Answers

A financial statistic called net present value (NPV) evaluates the present value of anticipated cash flows from an investment after they have been discounted at a given rate of return or discount rate. It is applied to determine an investment project's viability and profitability.

The market value in year 5 of Caldwell Pipe Corporation is $20,000 with annual cash operating costs of $40,000 for the first 5 years and $10,000 for the remaining 5 years. The remaining life of the company is 5 years. Now, let's calculate the net present value of the investment.

Calculation of NPV: In the given case, the investment will be of $20,000 in the initial year. Therefore, the initial cash outflow is -$20,000.Using the formula of NPV, we get NPV = [Cash inflow/(1 + r)^n] - initial cash outflowHere, the cash inflow is annual cash operating costs, r is the discount rate and n is the number of years. For year 1, the cash inflow is -$40,000 as there is an initial investment of $20,000.

Therefore, NPV1 = [-40,000/(1+r)^1] - 20,000For year 2, the cash inflow is -$40,000 as there is an initial investment of $20,000.

Therefore, NPV2 = [-40,000/(1+r)^2] - 20,000For year 3, the cash inflow is -$40,000 as there is an initial investment of $20,000.

Therefore, NPV3 = [-40,000/(1+r)^3] - 20,000For year 4, the cash inflow is -$40,000 as there is an initial investment of $20,000.

Therefore, NPV4 = [-40,000/(1+r)^4] - 20,000For year 5, the cash inflow is -$50,000 as there is an initial investment of $20,000.

Therefore, NPV5 = [-10,000/(1+r)^5] + [-40,000/(1+r)^4] - 20,000We will now calculate the total NPV of the investment as  NPV = NPV1 + NPV2 + NPV3 + NPV4 + NPV5. The investment will be profitable if NPV is positive. Thus, the investor will make money on the investment.

To know more about Net Present Value visit:

https://brainly.com/question/32453760

#SPJ11

How well does FedEx accomplish the key elements that must be completed at each stage of the strategic sourcing process? Explain your answer. How does the governance structure for supply chain management at Federal Express support the strategic sourcing process? Evaluate Federal Express's methods/efforts to align with its suppliers both operationally and strategically. Are there elements of the strategic sourcing process used at Federal Express that apply to manufacturing companies? Name one sourcing challenge faced by Federal Express and recommend a strategy to overcome this challenge.

Answers

As an AI language model,  access to real-time information or the ability to evaluate current practices at FedEx. provide a general understanding of the strategic sourcing process.

Key elements of the strategic sourcing process:

Spend Analysis: Evaluating current spending patterns and identifying opportunities for cost savings and process improvement.

Supplier Evaluation and Selection: Assessing potential suppliers based on criteria such as quality, reliability, cost, and sustainability.

Negotiation: Engaging in discussions with suppliers to establish favorable terms, pricing, and contractual agreements.

Contracting: Formalizing the agreement with chosen suppliers through written contracts that outline responsibilities, terms, and performance metrics.

Supplier Relationship Management: Continuously monitoring and managing supplier performance, fostering collaboration, and resolving issues.

Learn more about AI language model here

https://brainly.com/question/30112977


#SPJ11

Cat in the Rain
There were only two Americans stopping at the hotel. They did
not know any of the people they passed on the stairs on their way
to and from their room. Their room was on the second flo

Answers

The story "Cat in the Rain" by Ernest Hemingway begins with two Americans staying at a hotel who are unfamiliar with the other guests. Their room is located on the second floor.

In the opening lines of "Cat in the Rain," Hemingway establishes the setting and introduces the main characters, two Americans. The story takes place at a hotel where the Americans are staying temporarily. The narrative mentions that the Americans do not know any of the people they encounter while walking up and down the stairs to their room. This suggests a sense of detachment and unfamiliarity with their surroundings and fellow guests.

By emphasizing the Americans' lack of acquaintance with others in the hotel, Hemingway creates an atmosphere of isolation and detachment. It also sets the stage for the events to come and highlights the Americans' limited social interactions during their stay.

The mention of their room being on the second floor is a simple detail that adds to the overall description of the hotel. It provides a sense of their physical location within the building and serves as a basic reference point for the unfolding story.

The opening lines of "Cat in the Rain" introduce the two American characters who are staying at a hotel and are unfamiliar with the other guests. Their room on the second floor sets the stage for the narrative and contributes to the atmosphere of isolation and detachment that permeates the story.

To know more about narrative visit:

https://brainly.com/question/75925

#SPJ11

5. What are the key questions in the physical arrangement of people, equipment and space in a process? 6. What are the goal of Service system maps (SSM) 7. Explain five benefits of SSM usage

Answers

The key questions in the physical arrangement of people, equipment, and space in a process involve determining the most efficient and effective layout to optimize productivity, workflow, and safety.

The goal of Service System Maps (SSM) is to visually represent the various components and interactions within a service system. SSM provides a holistic view of the service delivery process, including the customer journey, touchpoints, support functions, and interactions between different stakeholders.

Service System Maps (SSM) have several goals. Firstly, they provide a visual representation of the service system, making it easier to understand and communicate complex processes. Secondly, SSM helps to identify bottlenecks, inefficiencies, and areas for improvement within the service delivery process.

The five benefits of using SSM include:

Enhanced understanding and communication of complex service processes.

Identification of bottlenecks, inefficiencies, and improvement opportunities.

Improved customer experiences and satisfaction through a holistic view of the customer journey.

Facilitation of collaboration and coordination among different stakeholders.

Support for strategic decision-making by identifying areas for innovation and process optimization.

Learn more about stakeholders here:

https://brainly.com/question/29532080

#SPJ11

How will you form exchange rate forecasts based on the covered
interest parity and purchasing power parity, respectively? Explain
your answer with illustrative examples.

Answers

Exchange rate forecasts can be formed using two main concepts: covered interest parity (CIP) and purchasing power parity (PPP).

1. Covered Interest Parity (CIP):

Covered interest parity is an economic principle that states that the forward exchange rate should equalize the interest rate differentials between two currencies. Based on CIP, exchange rate forecasts can be formed as follows:

Example:

Let's consider two countries, A and B, with currencies A$ and B$. The interest rate in country A is 4% per annum, and in country B, it is 2% per annum. The current spot exchange rate is A$1 = B$0.50.

According to CIP, the forward exchange rate should be determined by the interest rate differential between the two countries. In this case, the interest rate differential is 4% - 2% = 2%.

If the forward exchange rate does not align with the interest rate differential, an arbitrage opportunity would exist. Investors would borrow in the country with the lower interest rate and convert the funds to the currency of the country with the higher interest rate. They would then invest in that country and lock in a profit. The actions of arbitrageurs would lead to adjustments in the exchange rate to eliminate the arbitrage opportunity.

So, based on CIP, if the interest rate differential is 2% and the current spot exchange rate is A$1 = B$0.50, the exchange rate forecast for the forward rate would be A$1 = B$0.51.

2. Purchasing Power Parity (PPP):

Purchasing power parity is an economic theory that suggests exchange rates should adjust to equalize the prices of a basket of goods between different countries. Based on PPP, exchange rate forecasts can be formed as follows:

Example:

Consider two countries, X and Y, where the price of a particular basket of goods in country X is $100 and in country Y is €80. The exchange rate is currently $1 = €0.80.

According to PPP, the exchange rate should adjust to reflect the relative prices of the basket of goods. In this case, the ratio of prices is $100 / €80 = $1.25 per euro.

If the current exchange rate does not align with the PPP ratio, there would be a misalignment in the purchasing power between the two countries. This would create an opportunity for arbitrage, as goods would be cheaper in one country compared to the other.

Based on PPP, if the ratio of prices is $1.25 per euro and the current exchange rate is $1 = €0.80, the exchange rate forecast would suggest that the euro is undervalued. Therefore, the exchange rate is expected to adjust to reflect the PPP ratio, resulting in a higher exchange rate for the euro.

It's important to note that while CIP and PPP provide frameworks for exchange rate forecasting, actual exchange rates are influenced by numerous factors, including economic indicators, market sentiment, political events, and speculative activities. Therefore, these forecasting methods should be used as guidelines and be supplemented with additional analysis and information.

Learn more about covered interest parity here:

https://brainly.com/question/26562020

#SPJ11

SBS Corp is considering the purchase of a plant that will cost RM50 million. The purchase of the plant is expected to provide a return on invested capital ROIC of 23%. The forecast Earnings Before Interest and Tax (EBIT) is RM20 million. The company is evaluating 2 financial plans for the purchase. The corporate tax rate is 25%. i. Planl: 100% financing with equity ii. Plan2: Financing 30% of the purchase of the plant by issuing a bond with a coupon rate of 8% A similar company in the stock market that uses a capital structure of 30% debt and 70% has a systematic risk of 1.5. The stock market average return is 20%. The fixed deposit rate offered by banks currently is 2.8%. The stock market regards this fixed deposit rate as free of any risk. a. Calculate the systematic risk for Plan 1. b. What is the cost of equity if the company decides on financing Plan 1? C. Calculate the weighted average cost of capital if the company chooses Plan 2? d. Based on your analysis, should the company go ahead with the purchase of the plant and which financing plan should the company choose. e. Calculate the Net Operating Profit After Tax (NOPAT) and the Economic Value Added (EVA) of the plant. Is there any difference to your decision based on the calculations of the EVA and the decisions of part d?

Answers

The Net Operating Profit After Tax (NOPAT) and Economic Value Added (EVA) should be calculated, and the impact of EVA on the decision should be evaluated.

Based on the given information, the systematic risk for Plan 1 needs to be calculated, the cost of equity for Plan 1 should be determined, the weighted average cost of capital (WACC) for Plan 2 should be calculated, and a decision regarding the purchase of the plant and the financing plan needs to be made.

To calculate the systematic risk for Plan 1, we need the systematic risk of the stock market and the capital structure of the company. However, the information regarding the capital structure of SBS Corp is not provided, making it impossible to calculate the systematic risk for Plan 1.

The cost of equity for Plan 1 can be calculated using the Capital Asset Pricing Model (CAPM). However, we need the systematic risk (beta) for Plan 1, which is not provided, making it impossible to determine the cost of equity.

For Plan 2, the WACC can be calculated by weighting the cost of debt and the cost of equity based on their respective proportions in the capital structure. However, the proportions of debt and equity are not given, making it impossible to calculate the WACC for Plan 2.

Without the necessary information, it is not possible to determine the systematic risk for Plan 1, the cost of equity for Plan 1, or the WACC for Plan 2. Therefore, a decision regarding the purchase of the plant and the financing plan cannot be made based on the given information.

The calculation of NOPAT and EVA can provide additional insights into the financial performance of the plant. However, since we do not have the necessary information to calculate the relevant values, it is not possible to assess the impact of EVA on the decision.

In conclusion, due to the lack of necessary information, it is not possible to answer the questions and make an informed decision regarding the purchase of the plant and the financing plan.

Learn more about financing, below:

https://brainly.com/question/10024737

#SPJ11

Which category in the CRAAP test is about finding out how up-to-date the content of a website is?
What is one way to avoid plagiarism?
If you copy the lyrics to a recent top 10 song and post them to your blog, claiming it as your own work, you have _____________________.
violated the copyright on the work
plagiarized the original songwriter
violated the copyright on the work and you plagiarized the original songwriter

Answers

The category in the CRAAP test that pertains to determining the timeliness or currency of content on a website is "Currency."

One way to avoid plagiarism is to properly cite and attribute any sources you use in your work. This includes providing in-text citations and a bibliography or reference list that clearly identifies the original sources of information or ideas. If you copy the lyrics to a recent top 10 song and post them to your blog, claiming them as your own work, you have violated the copyright on the song and you have also plagiarized the original songwriter. Both of these actions would be considered intellectual property infringements.

learn more about:- CRAAP test here

https://brainly.com/question/30407814

#SPJ11

You just joined Cuber, a start‑up company (formed by Sam Simba)
that plans to launch a web site offering transportation matching
services for pet owners. Cuber has registered the web site
Cuber.com.

Answers

With Cuber, you can be sure that your pet will always be in good hands.

Cuber is a start-up that provides transportation matching services for pet owners. The company was formed by Sam Simba, and it has registered the website Cuber.com. The web site intends to help pet owners connect with transportation services to take their pets wherever they need to go. It is a unique service that will provide a valuable service for pet owners who need help getting their pets from one place to another. With Cuber, pet owners can rest assured that their furry friends will be in good hands. The company is committed to providing a reliable and safe service that pet owners can trust. So, if you are a pet owner in need of transportation services, be sure to check out Cuber.com. The website is easy to use, and it offers a wide range of services to meet the needs of pet owners everywhere. With Cuber, you can be sure that your pet will always be in good hands.

To know more about website visit:

https://brainly.com/question/32113821

#SPJ11

A(n) results if an agent tries to represent and act on behalf of more than one principal in the same transaction. Multiple Choice breach by overreach fiduciary breach conflict of interest Ocollaboration breach breach in conflict

Answers

The situation described in which an agent tries to represent and act on behalf of more than one principal in the same transaction is referred to as a conflict of interest.

A conflict of interest occurs when an agent has competing obligations or interests that may compromise their ability to impartially represent multiple principals.

In such a situation, the agent may be influenced by personal gain or biased towards one principal at the expense of others. This can lead to a breach of the agent's fiduciary duty, which is the legal and ethical obligation to act in the best interest of each principal.

Conflicts of interest can arise in various scenarios, such as when an agent represents both the buyer and seller in a real estate transaction, or when a financial advisor recommends investments that benefit them more than their clients. It is important for agents to disclose any potential conflicts of interest and seek to mitigate them to ensure fair and equitable representation of all principals involved.

Learn more about transaction here : brainly.com/question/24730931

#SPJ11

Which of the following statements best define joint​ products?
Question content area bottom
Part 1
A. When a joint production process yields two or more products with high total sales values relative to the total sales values of other​ products, those products are called joint products.
B. Product of a joint production process that have the same sales value compared with the total sales value of the byproducts is called a joint product.
C. When one product has a high total sales value compared with the total sales value of other products of the​ process, that product is called a joint product.
D. When one product has a low total sales value compared with the total sales value of other products of the​ process, that product is called a joint product.

Answers

Joint products are products that are obtained from a single production process where two or more products are simultaneously produced. These products have a significant combined value compared to other products produced in the same process. The correct answer is option A. When a joint production process yields two or more products with high total sales values relative to the total sales values of other​ products, those products are called joint products.

Joint products are difficult to distinguish from each other as they are the result of the same production process. They are also known as "by-products.

" For instance, gasoline and diesel fuel are joint products as their production yields both products.

Similarly, milk and cream are joint products, with cream being obtained as a result of producing milk. T

he distinguishing characteristic of joint products is that they arise from a common production process and have substantial value relative to other products produced in that process.

Therefore, the  correct answer is option A. When a joint production process yields two or more products with high total sales values relative to the total sales values of other​ products, those products are called joint products.

Read more about Joint products

https://brainly.com/question/31953335

#SPJ11

write about Discussion on communication and the effects of noise and barriers and with 2 examples.

Answers

Communication is the process of exchanging information between individuals or groups, and it plays a crucial role in all aspects of society. It is essential for fostering understanding, cooperation, and maintaining personal and professional relationships. However, communication can be affected by various challenges, including noise and barriers, which can hinder the smooth flow of information and lead to misunderstandings.

Noise in communication refers to any unwanted interference that disrupts the transmission of information.

It can manifest in different forms such as physical, psychological, and semantic noise.

Physical noise includes external factors like loud sounds, traffic, or machinery, while psychological noise arises from internal distractions like daydreaming, anxiety, or stress.

Semantic noise occurs when there are language barriers or differences in interpreting the message between the sender and receiver.

Barriers in communication are obstacles that impede effective communication.

They can be physical, cultural, or linguistic in nature. Physical barriers hinder the transmission of information, such as distance, closed doors, or soundproofing.

Cultural barriers arise from differences in values, beliefs, or customs, which can impact the understanding of the message.

Linguistic barriers occur when there are language or dialect differences, leading to confusion and misunderstanding.

For example, a person who is deaf attending a lecture may face a physical barrier as they are unable to hear the speaker's information.

Similarly, a French person visiting an English-speaking country may encounter a cultural barrier due to differences in values and customs.

In summary, communication is a vital process of transmitting and receiving information, but it can be affected by noise and barriers. Understanding and overcoming these challenges are crucial for effective and meaningful communication.

Read more about communication barriers

https://brainly.com/question/28709553

#SPJ11

Which of the following statements is false?

A. In traditional costing, high-volume products are often subsidising the low-volume products.

B. Traditional costing systems tend to create a product cost distortion problem.

C. Traditional costing systems tend to over cost high-volume product lines.

D. Traditional product costing systems recognise a range of non-volume-based cost drivers.

Answers

The false statement is (D) Traditional product costing systems recognize a range of non-volume-based cost drivers.

A, B, and C are true statements regarding traditional costing systems, which allocate costs based on volume-related measures such as direct labor hours or machine hours. In such systems, high-volume products often bear a higher proportion of overhead costs, subsidizing the lower-volume products (A).

This can result in a product cost distortion problem (B) where the costs of low-volume products are inaccurately assigned, potentially impacting pricing decisions and profitability analysis. Furthermore, traditional costing systems tend to over cost high-volume product lines (C) because the overhead costs are spread thinly across the high-volume products, resulting in inflated costs per unit.

However, statement D is false. Traditional product costing systems typically focus on volume-based cost drivers and allocate costs based on these drivers. Non-volume-based cost drivers, such as complexity, setup time, or special handling requirements, are not typically recognized or incorporated into traditional costing systems. This limitation can lead to inaccurate cost allocation and hinder the ability to assess the true cost implications of non-volume-related factors on product profitability.

Learn more about traditional costing systems here:

https://brainly.com/question/15742146

#SPJ11

What is the probability of completing the project on or before 22 weeks for the following project data given in weeks?
Activity A B C D E F G H I J
Predecessor None None None A B C C E,F D H,G
Optimistic 10 2 2 2 2 2 4 8 4 4
Most likely 12 6 8 4 4 10 4 8 10 4
Pessimistic 14 10 14 6 18 18 16 20 16 16

Answers

The question is asking for the probability of completing the project on or before 22 weeks for the given project data. Based on the given data, the critical path for the project is A-C-F-J, which has a total duration of 26 weeks. This means that the project cannot be completed on or before 22 weeks as the critical path itself takes longer than 22 weeks.

However, to calculate the probability of completing the project on or before a specific duration, we need to use the PERT formula:Expected duration = (Optimistic + 4 x Most likely + Pessimistic) / 6Using this formula for the critical path, we get:Expected duration = (2+4(10)+18)/6 + (2+4(2)+14)/6 + (2+4(10)+18)/6 + (4+4(4)+16)/6 = 12 + 3 + 12 + 6 = 33.

Therefore, the probability of completing the project on or before 22 weeks is zero as the expected duration is longer than 22 weeks.

To know more about project visit:-

https://brainly.com/question/30460097

#SPJ11

ABC restaurant also provides food delivery to its customers. Plastic meal boxes are used. About 150 plastic meal boxes are used per day, following a normal distribution with a standard deviation of 16 packs. Boxes are order from its supplier, lead time is normally distributed with an average of 5 days and a standard deviation of 1 day. To maintain a 95% service level, what ROP is appropriate?

Answers

Given that ABC restaurant uses 150 plastic meal boxes per day and it follows a normal distribution with a standard deviation of 16 packs.

The lead time for the boxes is normally distributed with a mean of 5 days and a standard deviation of 1 day.To maintain a 95% service level, we need to calculate the ROP.

Appropriate ROP is the Reorder Point. It is the level of inventory at which the company should place an order for more inventory, ensuring that it does not run out of stock before the new inventory arrives. To maintain a 95% service level, we need to find the Z value for 95% in the standard normal distribution table.

The Z value for 95% is 1.65.Using this, we can find the ROP as follows:

ROP = Lead time x Daily demand + Safety stock

Daily demand = 150 plastic meal boxes per dayLead time = 5 days

Safety Stock = Z * Standard Deviation of lead time*sqrt(Daily demand)Z = 1.65SD of lead time = 1 day

Daily Demand = 150*ROP = 5 x 150 + 1.65 x 16 x sqrt(150) = 750 + 39.31 = 789.31So,

the appropriate ROP is 790 units. Therefore, option C is the correct answer.

To know more about normal distribution, visit:

https://brainly.com/question/15103234

#SPJ11

Mason Industries purchased a drilling rig for $75,900. Delivery costs totaled $2,880. The useful life is 7 years and the salvage value is $12,903. Prepare a depreciation schedule using the straight-line method.

Answers

The depreciation schedule shows the depreciation expense, accumulated depreciation, and ending book value for each year over the 7-year useful life of the drilling rig using the straight-line method.

To prepare a depreciation schedule using the straight-line method, we need to determine the annual depreciation expense. The formula for straight-line depreciation is:

Depreciation Expense = (Initial Cost - Salvage Value) / Useful Life

Given the following information:

Initial Cost = $75,900

Delivery Costs = $2,880

Salvage Value = $12,903

Useful Life = 7 years

To calculate the annual depreciation expense:

Depreciation Expense = ($75,900 + $2,880 - $12,903) / 7

Depreciation Expense = $65,877 / 7

Depreciation Expense = $9,410.14 (rounded to two decimal places)

Now, we can prepare the depreciation schedule:

Year | Beginning Book Value | Depreciation Expense | Accumulated Depreciation | Ending Book Value

1 | $78,780 | $9,410.14 | $9,410.14 | $69,369.86

2 | $69,369.86 | $9,410.14 | $18,820.28 | $59,959.72

3 | $59,959.72 | $9,410.14 | $28,230.42 | $50,549.58

4 | $50,549.58 | $9,410.14 | $37,640.56 | $41,139.44

5 | $41,139.44 | $9,410.14 | $47,050.70 | $31,729.30

6 | $31,729.30 | $9,410.14 | $56,460.84 | $22,319.16

7 | $22,319.16 | $9,410.14 | $65,870.98 | $12,909.02

To know more about Depreciation Expense, visit:

https://brainly.com/question/17440027

#SPJ11

In 2020 there was a sudden drop of market liquidity when lockdowns were first declared. Discuss and explain with reference to examples covered in class whether banks were in a stronger or weaker position to withstand that shock compared to the liquidity shock of 2008.

Answers

When the COVID-19 pandemic caused lockdowns and a dramatic reduction in market liquidity in 2020, banks were usually better prepared to handle the shock than they were in 2008.

During the 2008 financial crisis, banks faced significant challenges due to their exposure to risky assets, high levels of leverage, and inadequate capitalization. Many banks were undercapitalized and lacked sufficient liquidity buffers, making them vulnerable to the liquidity shock. This resulted in the need for government bailouts and interventions to stabilize the financial system.

However, since the 2008 crisis, regulatory reforms have been implemented to strengthen the banking sector. Measures such as higher capital requirements, improved risk management practices, and enhanced supervision were put in place. These reforms aimed to improve the resilience and stability of banks, ensuring they were better prepared to withstand future shocks.

When the liquidity shock occurred in 2020, banks had higher capitalization levels and stronger liquidity positions. They had rebuilt their capital buffers and increased their liquidity reserves in compliance with regulatory requirements. Additionally, central banks implemented swift and substantial measures to provide liquidity support and stabilize financial markets.

The actions taken by regulators and central banks, along with the lessons learned from the 2008 crisis, contributed to banks being in a stronger position in 2020. While the 2020 liquidity shock posed significant challenges, the banking sector demonstrated greater resilience and ability to absorb the shock compared to the previous crisis.

To know more about market liquidity visit:

https://brainly.com/question/15607773

#SPJ11

Question 7 of 9 -/1 E 1 View Policies Current Attempt in Progress Oriole Company is considering an investment that will return a lump sum of $740,000 3 years from now. Click here to view the factor table. (For calculation purposes, use 5 decimal places as displayed in the factor table provided.) What amount should Oriole Company pay for this investment to earn an 11% return? (Round answer to 2 decimal places, e.g. 25.25) Oriole Company should pay $ eTextbook and Medial Sve for Later Attempts: 0 of 5 used

Answers

Oriole Company should pay $554,148.19 for this investment to earn an 11% return.

To calculate the amount Oriole Company should pay for the investment, we need to determine the present value of the lump sum of $740,000 to be received in 3 years. Oriole Company desires an 11% return on its investment. Using the factor table or a financial calculator, we can find the present value factor for 3 years at an 11% interest rate, which is 0.75053.Next, we multiply the future lump sum amount by the present value factor to find the amount Oriole Company should pay for the investment: Amount to pay = Future lump sum * Present value factor

= $740,000 * 0.75053

= $554,148.19Rounded to 2 decimal places, Oriole Company should pay $554,148.19 for this investment to earn an 11% return.

Therefore, the amount Oriole Company should pay for this investment to earn an 11% return is $554,148.19.

learn more about Oriole Company  here:

https://brainly.com/question/32247846

#SPJ11

Chapter 7 Assuming that an ecommerce operator is targeting a local market of 200,000 potential visitors to the site. Without any effort in SEO the available target market shrinks to A. 180,000 B. 120,000 C. 70,000 D. 140,000 view the 2 In a SERP our of 1,000 viewers only second page of SERP A. 50 B. 150 C. 200 D. 100 3 One of the following is not a function of search engines A. Crawling B. Indexing C. Optimizing D. Ranking 4 The number of Http requersts can by reduced by A. Write good English B. Combining files C. Do not include pictures D. Include videos

Answers

The functions of search engines include: Crawling, Indexing, and Ranking.The fourth question is: The number of Http requests can by reduced by A. Writing good English B. Combining files C. Not including pictures D. Including videos Answer: B. Combining filesThe number of Http requests can be reduced by combining files. This is because when several files are combined into one, there are fewer files to request, which can reduce the number of Http requests that are made to the server.

Chapter 7 Assuming that an ecommerce operator is targeting a local market of 200,000 potential visitors to the site. Without any effort in SEO the available target market shrinks to A. 180,000 B. 120,000 C. 70,000 D. 140,000 Answer: B. 120,000When an ecommerce operator targets a local market of 200,000 potential visitors to the site, and without any effort in SEO, the available target market shrinks to 120,000 viewers.The reason is that the lack of SEO (Search Engine Optimization) would mean that the ecommerce operator is not optimized to show up on top of SERP (Search Engine Result Page) for the keywords that are being used to search for the ecommerce operator's website. Thus, out of a potential market of 200,000 visitors, only 120,000 would find the website.The second question is: In a SERP, out of 1,000 viewers, only the second page of SERP is viewed by: A. 50 B. 150 C. 200 D. 100 Answer: B. 150Only 150 viewers out of 1,000 viewers view the second page of SERP.The third question is: One of the following is not a function of search engines A. Crawling B. Indexing C. Optimizing D. Ranking Answer: C. OptimizingOptimizing is not a function of search engines.

To know more about Crawling visit:

https://brainly.com/question/1139980

#SPJ11

Other Questions
In economics, as a result of scarcity: Consumers face tradeoffs regarding what they want to purchase and consume. Producers face tradeoffs regarding what they are able to supply. It may not be possible to fulfill all possible wants and needs among all individuals in the economy. All of the above. Postnatal depression affects approximately 815% of new mothers. One theory about the onset of postnatal depression predicts that it may result from the stress of a complicated delivery. If so, then the rates of postnatal depression could be affected by the type of delivery. A study (Patel et al. 2005) of 10,935 women compared the rates of postnatal depression in mothers who delivered vaginally to those who had voluntary cesarean sections (C-sections). Of the 10,545 women who delivered vaginally, 1025 suffered significant postnatal depression. Of the 390 who delivered by voluntary C-section, 50 developed postnatal depression. a. Draw a graph of the association between postnatal depression and type of delivery (mosaic plot, by hand, the relative proportion just needs to be roughly correct). Please describe the pattern in this data. b. How different are the odds of depression under the two procedures? Calculate the odds ratio of developing depression, comparing vaginal birth to C-section. c. Calculate a 95% confidence interval for the odds ratio. d. Based on your result in part (c), would the null hypothesis that postpartum depression is independent of the type of delivery likely be rejected if tested? e. What is the relative risk of postpartum depression under the two procedures? Compare your estimate to the odds ratio calculated in part (b). PLEASE HELP ASAP2. (10 points) Shantel fills a tank with water at a rate of 4m Let V(t) be the volume of minute water in the tank after t minutes. (a) Suppose at t = 0, the tank already contains 10 m of water. A Marcus takes part in math competitions. A particular contest consists of 20 multiple-choice questions, and each question has 4 possible answers. It awards 5 points for each correct answer, 1.5 points for each answer left blank, and 0 points for incorrect answers. Marcus is sure of 10 of his answers. Hyruled out 2 choices before guessing on 4 of the other questions and randomly guessed on the 6 remaining problems. What is the expected score?a. 67.5 b. 75.6 c. 90.8 d. 097.2 The company depreciates motor vehicles on a straight-line basis.Their expected useful life is six years.Each motor vehicle has a residual value of $5000.For tax purposes, the motor vehicles depreciate at 20% per annum on a straight-line basis.Accounting profit before tax (PBT) for the years 2015 to 2020 is $60000 per annum.The tax rate is 12.5%.Requireda. Calculations of current and deferred tax (5 marks)b. Related figures to be included in the financial statements for the years 2015 to 2020 (5 marks) Prove that for all n N, the formula an = 3(-2)^n + n(2)^n + 5 satisfies the recurrence relation a0 = 8, a1 = 1, a2 = 25, an = 2an-1 + 4an-2 - 8an-3 + 15. A triangle has sides of 12&20. Which of the following could be the length of the third side? A researcher is testing the hypothesis that the average monthly income in the population is 20,000 AD. Using the formula for testing a hypothesis about the mean,the researcher calculates the Z value to be 2.06. If the researcher is using 9596 confidence level, what should the researcher do next? Why is the highlighted textfrom The Proposal considered"situational irony"?A. The audience knows Natalya is married,while Lomov thinks she is single and wantsto propose.B. Lomov says he wants to marry Natalya,but he really wants to steal the family'sproperty.C. Lomov says he wants to propose toChubukov's daughter, when he means hewould never marry her.D. Chubukov expects Lomov to ask him formoney; however, Lomoy came to propose tohis daughter. for the sequence defined by: a 1 = 1 a n 1 = 5 a n 2 find: a 2 = a 3 = a 4 = Question 3[5 marks]: Consider the given slicing structure matrix: 0 1 10 0 0 0 0 1 3 0 1 0 1 0 1 2 574 1 1 1 1 1 6 8 0 1 1 a) [2 points) Draw the slicing structure tree diagram for the given slicing structure matrix. b) [2 points] Draw the layout for the given slicing structure matrix. c) [1 point] Construct an alternative slicing structure matrix. (neighborhood) Use the definition m = limf(x+h)-f(x) to find the slope of the tangent to the curve 6-0 h f(x)=x-1 at the point P(-2,-9). Find "(x) for f(x)=sec (x). Findf)(x) for f(x)=(3-2x)-. Write the equation, in slope-intercept form, of the line tangent to the curve y=x-4 at x=5. The Machine Shop is a retailer of tools for carpenters. Their top selling product is a revolutionary saw, which sells for 999. However, they are short on cash and try to hold the storage as short as possible. A customer interested in the saw buys with a probability of 0.8 if the saw is in the shop. If he has to wait for a day, he will buy and come back with a probability of 0.6. If the customer has to wait for two days, he will buy with a probability of 0.6, and if he has to wait for more than that, the customer will choose another saw. The owner thinks about offering discounts to customers willing to wait: 5% for one day waiting, 10% for two days waiting, and 15% for more than two days of waiting. Then he believes that the probability of a customer buying will go up to 0.8 for one day waiting, 0.6 for two days waiting, and 0.4 for more than two days of waiting. The owner can buy the saw for 450 and choose express freight (80 for one day delivery), ordinary delivery (40 for two days delivery), and snail delivery (free of charge, the tool will come when it comes). What decisions should be made? TY show and game "Who Wants to be a ings for each ques- which of the following is not an evidence based practice behavior expected of staff nurses with a baccalaurette degree?a)conduct small research studies in are of expertiseb)participate in unit or agency projects to revise nursing protocolsc)read research articles related to ones are of practice Problem 1 (Specific Factors Model). Canada and U.S. trade two products with each other - Cars (C) and Textile (7). Denote all US variables with *. Each product is produced using labour only but there are two types of workers in each industry: low- skilled workers (L) and high-skilled ones (H). Low-skilled workers can easily change occupation and move from one industry to another if they can earn more there. Skilled workers, however, cannot change occupation because their skills are specific to the industry in which they work. Denote with L low-skilled labor, so that Lc and LT are employment of low-skilled workers in auto and textile industries and Lc+LT = L is the full employment condition for unskilled labor, with being the total number of unskilled workers. For skilled labor, employment levels are given exogenosuly by Hc and HT. Production technologies in the two industries are the same in both coun- tries and are given by the following production functions: Yc LOHC YT = LT + HT Consumers in both countries have the where Yo and Yr are output levels. same preferences given by utility function U = CECT where Ce and CT are consumption levels of the two goods. Also suppose that Canada has more skilled workers in auto industry but less in textiles than US: Hc> Hc; HT the operating system is used to manage the software applications used in business activitiestruefalse Short Continuous Assessment. 1: Define global leadership and identify any four great global leaders you know 2: Enumerate the opportunities and challenges of global leaders. 3: As a global leader, identify and develop your own global talent pool. Lecture Day 3 Class exercise & discussion When it comes to trainee reactions, instructor style is moreimportant than perceived organizational support for training? Groupof answer choices True False In a area, 60% of residents have been vaccinated. Supposethe random sample of 11 residents is selected, what is theprobability that , all of them are vaccinated, not all of them arevaccinated,more than 9 of them vaccinated find the average speed of the ball between t=1.0s and t=2.0s . express your answer to two significant figures and include appropriate units.