Scientist can gather the information of the wind speed and location, for better understand hurricanes
What is hurricanes ?A hurricane is a tropical cyclone is a fast rotating storm system with a low-pressure core, a closed low-level atmospheric circulation, high winds, and a spiral arrangement of thunderstorms causing heavy rain.
Aircraft can collect thorough, exact measurements of winds in a cyclone, which can assist researchers understand what is going on inside the storm and allow for better forecasts.
Hence,scientist can gather the information of the wind speed and location, for better understand hurricanes
To learn more about hurricanes, refer:
https://brainly.com/question/18950883
#SPJ2
Which of the following paths correctly displays the transfer of energy for sound?
energy source to detection to medium
detection to an energy source to medium
medium to an energy source to detection
energy source to medium to detection
Answer:
the energy source, the transfer of energy through a medium,
Explanation:
The three parts of sound consist of the energy source, the transfer of energy through a medium, and the detection of the sound.
How can you describe a mineral that sparkles, breaks into thin sheets, and has a measure of 9 on the hardness scale?
1. It is metallic, has cleavage, and can be easily scratched.
2.It is non-metallic, has cleavage, and can be scratched by a nail.
3.It is metallic, has cleavage, and can be scratched with special equipment.
or 4. It is non-metallic, does not have cleavage, and can be scratched with difficulty.
Select the correct location on the map.
Identify the area on the satellite image that is experiencing the heaviest rainfall. The color bar shows amounts of rainfall from lightest (bottom) to heaviest (top).
Answer:
The area on the map that is showing the deepest red
Explanation:
By looking at the relative positions of the elements calcium, Ca, fluorine, F, sulfur, S, and oxygen, O, in the Periodic Table, which TWO descriptions are TRUE about calcium fluoride, CaF2, and sulfur dioxide, SO2?
CaF2 is an ionic compound, and SO2i is a covalent compound.
CaF2 is formed by covalent bonds, and SO2 is formed by ionic bonds.
CaF2 cannot conduct electricity when dissolved in water, but SO2 can.
CaF2 is a gas at room temperature, while SO2 has a high boiling point.
CaF2 has a high boiling point, while SO2 is a gas at room temperature.
CaF2 is soft at room temperature, while SO2 is hard and forms crystals.
Answer:
Calcium Compunds-The fluoride,CaF²,is important to the production of hydrofluoric acid,Wich is made from CaF² by the action of sulfuric acids.CaF² us used laboratory instruments as a window material both infrared and ultraviolet radiation.
Sorry if other question not answeredCalcium Compunds-The fluoride,CaF²,is important to the production of hydrofluoric acid,Wich is made from CaF² by the action of sulfuric acids.CaF² us used laboratory instruments as a window material both infrared and ultraviolet radiation.
Thus, Since the turn of the 20th century, glass has been made with calcium fluoride, a novel substance. It is a solid that dissolves readily in water and has a special physical and chemical makeup that makes it suitable for usage as a glassmaking material.
Glass used in windows, bottles, and other glass goods was formerly created from calcium silicates before the invention of this substance. The new glass, referred to as glass with added fluorides, has a number of advantages over calcium silicates, which have drawbacks that make them unsuitable for the creation of modern glass.
Calcium Fluorine is a naturally occurring element that is frequently found in rock, soil, plants, and animals.
Thus, Calcium Compunds-The fluoride,CaF²,is important to the production of hydrofluoric acid,Wich is made from CaF² by the action of sulfuric acids.CaF² us used laboratory instruments as a window material both infrared and ultraviolet radiation.
Learn more about Calcium fluoride, refer to the link:
https://brainly.com/question/28083686
#SPJ6
Please help me with this question,giving the first correct answer brainliest
Answer:
Protons and Electrons (c)
Explanation:
I added my explanation in the comments of the question
Answer:
protons and neutrons
Explanation:
please mark me as brainliest
explain how you can recognize the sound of a flute
The sound of a flute is poetic, light, mellow, and soft. Flute is a woodwind musical instrument produces the mild sound.
How flute produces sound?Sound is a vibration that propagates as an acoustic wave, through a transmission medium such as solid, liquid ang gases. When an object vibrates, it causes a movement in surrounding air molecules. The molecules collide with the molecules close to them, causing them to vibrating as well.
The sound from flute comes due to the vibrating columns of air inside it. In a flute, the air gets vibrated and the resonator amplifies the vibration and gets modified into sound. When air is blown into the holes of flute, it creates the vibration in the air molecules inside the flute and hence, sound is produced.
The flute can produced continuous sound by the presence of number of holes in it. The flute sounds may be high pitch or soft tone depends on the position of upper and lower lips on flute.The sounds of flute are rich, gentle and gracefull.
Learn to more about sounds in flute :
https://brainly.com/question/10153629
#SPJ3
Please help me asap .
Answer:
We use the four properties of sound: pitch, dynamics (loudness or softness), timbre (tone color), and duration.
Answer:
Dynamics, Duration, Pitch, Timbre! Hope this helped
Explanation:
GIVING BRAINLIEST!!!!
Answer:
1. Pecan tree 1 and pecan tree 4
2. I don't know
Explanation:
Please help me with this question,giving the first correct answer brainliest
Answer:
A
Explanation:
Answer:
C. Metalloids
Explanation:
Metalloids
What are the positive impacts of Genetically Modified Crops?
Brainlyst for the best answer. :)
Answer:
The crops will have the ability to be resistant to certain diseases
please answer all 5 ....
Answer:
a
Explanation:
just needed the points sorry
Please help me with this question,giving the first correct answer brainliest
Answer:
These elements are metalloids
Answer: C. Metalloids
Explanation:
Thank you for deleting that bot's answer.
Timbre describes the sound’s _____.
pitch
loudness
tone
quality
Answer:
A) pitch
Explanation:
I did band and also g*ogled it to check :)
If it isn't A, however, it is C
Hope this helps :D
Answer:
loudness
Explanation:
allow the ear to distinguish sounds which have the same pitch and loudnes
____ have the highest energy radiation of the Electromagnetic Spectrum.
microwaves
infrared rays
x-rays
gamma rays
Jennie observes her brother playing pool and has a theory that the potential energy in the pool stick is transformed into kinetic energy when he hits the ball.
Which explains how she can prove her theory?
A
She could measure the potential energy in the motionless ball on the pool table, and she could measure the potential energy of the pool stick as it moves to strike the ball. These total of these two measurements will be equal to the kinetic energy in the pool ball as it moves, and this proves there was a transformation of energy.
B
She could measure the potential energy when the pool stick is pulled back to strike the pool ball, and then she could measure the kinetic energy in the pool stick as it moves to strike the ball. The potential energy in the pool stick and the kinetic energy in the pool stick should be equal, proving there was a transformation of energy.
C
She could measure the potential energy when the pool stick is pulled back before moving to strike the pool ball, and she could measure the kinetic energy of the ball in motion after the pool stick strikes it. There should be an equal amount of kinetic energy and potential energy to prove there was a transformation of potential energy to kinetic energy.
D
She could measure the potential energy of the pool ball when it was sitting on the table, and she could measure the kinetic energy of the ball in motion after the pool stick strikes it. There should be an equal amount of potential energy in the motionless ball and kinetic energy in the ball after the stick strikes it to prove there was a transformation of potential energy to kinetic energy.
Answer:
Your answer would be C
Explanation:
hope this helps.
i need help please help me , god will bless you tonight .
Answer:
HEHEHE HA
Explanation:
Clash royale
Thoughts about Genetically Modified Crops
EXPLANATION PLZ NO EXAMPLES
BRAINLYIST FOR BEST ANSWER.
On a particular day, Denali had a temperature of -23°C at its peak and 13°C at its base. What could be the reason for this temperature difference?
A.
Temperature increases with an increase in altitude.
B.
Temperature decreases with an increase in altitude.
C.
The base is close to the Gulf of Alaska.
D.
The mountain receives lake-effect snow.
Answer:
B.) Temperature decreases with an increase in altitude.
As you climb a mountain, you can expect the air temperature to decrease by 6.5 degrees C for every 1000 meters you gain. This is called the standard average lapse rate.
i need help :>................
2.4 physics assignment.
Answer:The distance o the ramp that the car traveled is given by d=(1/2)at^2=(0.5)(3.96)(5.76)^2=65.69 meters. The horizontal component of this travel is 65.69*
Explanation:
In this activity, you will create a mind map showing the different pathways that can be found in the Government & Public Administration cluster. A mind map is a sketch or diagram that you can design yourself to organize your ideas. It could look like a tree with different branches or a park with different paths! Whatever you decide, you will put each pathway on a different spot on your mind map.
Under each pathway, you will give one example of a job found in each pathway.
Write a short note beside the job, explaining where you might find this person.
List at least one task that they accomplish to keep things running for us.
Answer:
Government & Public Administration
Jobs in the government and public administration career cluster involve planning, managing, and providing government legislative and administrative and regulatory services and related general purpose government services at the federal, state, and local levels.
This career cluster is divided into seven pathways:
Governance
National Security
Foreign Service
Planning
Revenue and Taxation
Regulation
Public Management and Administration
Governance
Officials involved in the governance pathway uphold the structure of our government. They typically work with constituents, or voters represented by elected officials; while others resolve conflicts among interest groups with opposing goals.
Sample occupations include:
Legislative Assistant
Congressional Aide
Lobbyist
County Commissioner
Senator
Representative
Mayor
Governor
Lieutenant Governor
National Security
Maintaining a strong national security encompasses such diverse activities as running a hospital, commanding a tank, programming computers, operating a nuclear reactor, or repairing and maintaining a helicopter. The military provides training and work experience in these fields and many others for more than 2.5 million people who serve in the active Army, Navy, Marine Corps, Air Force, and Coast Guard, their Reserve components, and the Air and Army National Guard.
Sample occupations include:
Combat Control Officer
Missiles and Space Systems Officer
Submarine Officer
Munitions Officer and Specialist
Infantry Officer and Specialist
Air Defense Artillery Officer
Military Intelligence Officer
Cryptographer
Intelligence Analyst
Foreign Service
People working in the Foreign Service pathway help to ensure peaceful relations between the U.S. and foreign countries. They also aid immigrants wanting to live and/or work in the U.S. These people serve mainly in embassies, consulates, diplomatic missions, and in Washington, D.C.
Sample occupations include:
Foreign Service Officer
Diplomatic Officer
Consular Officer
Ambassador
Diplomatic Courier
Planning
People who work in the Planning pathway develop long- and short-term land use plans to provide for growth and revitalization of urban, suburban, and rural communities, while helping local officials make decisions concerning social, economic, and environmental issues.
Sample occupations include:
Planner
Census Enumerator
Census Clerk
Federal Aid Coordinator
Economic Development Coordinator
Chief of Vital Statistics
Revenue and Taxation
People who work in the Revenue and Taxation pathway ensure that governments obtain revenue from businesses and citizens by collecting audits, monitoring taxes payable and collecting overdue tax dollars.
Sample occupations include:
Tax Examiner
Tax Clerk
Revenue Agent
Internal Revenue Investigator
Assessor
Auditor
Regulation
People who work in the Regulation pathway will typically possess a body of technical knowledge about an industry, the environment, or technology. This –coupled with a knowledge of related laws, rules, and regulatory systems –permit regulators to protect our health, safety, and environment as well as ensure the integrity of our financial, transportation, and public utility industries.
Sample occupations include:
Investigator/ Examiner
Code Inspector
Bank Examiner
Election Supervisor
Child Support Officer
Cargo Inspector
Border Inspector
Aviation Safety Officer
Public Management and Administration
Government agencies and public corporations and trusts have specific and rigorous standards for the stewardship of public resources. Public management careers will require technical skills related to budgeting, personnel management, procurement or other activities, and specific knowledge of the regulations and other policies that govern public management.
Sample occupations include:
Court Administrator or Clerk
City or County Clerk
City Council Member
City Manager
Purchasing Manager
Explanation:
correct me if I'm wrong
Explanation:
What is the Genetic Modification Process?
Brainlyist for the best answer
Answer:
Production of GMOs is a multistage process which can be summarized as follows:
1. identification of the gene interest;
2. isolation of the gene of interest;
3. amplifying the gene to produce many copies;
4. associating the gene with an appropriate promoter and poly A sequence and insertion into plasmids;
5. multiplying the plasmid in bacteria and recovering the cloned construct for injection;
6. transference of the construct into the recipient tissue, usually fertilized eggs;
7. integration of gene into recipient genome;
8. expression of gene in recipient genome; and
9. inheritance of gene through further generations.
Hi! I really need help on these questions, it would be great if you can answer them!
1: Equilibrium
[] When two forces are equal in opposite directions, they are in a state of equilibrium
2: Friction
[] It can be hard to sometimes slide a paper across a table, roll a car across the ground, etc etc. This is because of a force called friction which resists motion
3: Displacement
[] Work is only "done" when the object or surroundings are having movement, or in motion, and this creates displacement
4: Force
[] A force is a push/pull in any direction, this is a simple definition so not much can be added.
5: Inertia
[] Inertia is a force that likes to remain unchanged, or without movement
6: Effort
[] "Meg is holding up weight without movement. She hasn't done any work since it did not move, but is tired. Why?" Effort! She still put in effort even though no "work" happened
7: Work
[] Force times displacement is the equation for work
8: Motion
[] Look back to #3, when there is motion we can tell work is done
Have a nice day!
I hope this is what you are looking for, but if not - comment! I will edit and update my answer accordingly. (ノ^∇^)
- Heather
Jennie observes her brother playing pool and has a theory that the potential energy in the pool stick is transformed into kinetic energy when he hits the ball.
Answer:
This theory is true and should continue to expand on this theory.
Explanation:
hope this helps.
What are the negative impacts on Genetically Modified Crops?
EXPLANATION ONLY NOT EXAMPLES PLZ
Brainlyist for best answer
A little girl kicks a soccer ball. It goes 10 feet and comes back to her. How is this possible?
Answer:
Maybe she kicks it to a wall and it bounces back to her?
Explanation:
When going from slower medium to a faster medium, light is bent _____.
Answer:
When going from slower medium to a faster medium, light is bent _downwards_.
Explanation:
hope this helps you!
I have an Energy and temperature activity and I have questions to answer
I do not understand this question:
"Within a 24-hour period, at what three points should the temperature be taken? Why?"
Can somebody help me!!!
Answer:
8hours 16hours and 24 hours
Explanation:
this is because they 24÷3=8 so the time between the takings of the temperature are equal.
I need answers please i will give you 20
Can Someone help me i would really appreciate it
Answer: So pretty much all you have to do is explain why it's important to have a balanced life and use those Content Vocab words in the explanation you also might have to use the Academic Vocab words as well.
Hope this helps :)
Answer: I have no idea what that means
Explanation: