Please use same format, Thank you!
Peterson Awning manufactures awnings and uses a standard cost system. The company allocates overhead based on the number of direct labor hours. The following are the company's cost and standards data:

Answers

Answer 1

Peterson Awning manufactures awnings and uses a standard cost system. The company allocates overhead based on the number of direct labor hours. The following are the company's cost and standards data:

Standard cost per unit for Direct Material: $15

Standard cost per unit for Direct Labor: $25

Budgeted level of Production: 1,500 units

Budgeted Direct Labor hours: 3,000

Budgeted manufacturing overhead cost: $75,000

The predetermined overhead rate per direct labor hour is calculated as follows:

PRED = Estimated Overhead / Estimated Labor hours= $75,000 / 3,000 = $25.00 per direct labor hour. The overhead cost of a single unit is given as follows: $25 * 3.0 = $75.0 per unit. The total cost of each unit is determined by adding the cost of direct labor and direct materials to the overhead cost as follows:

Direct Material Cost per unit = $15.0

Direct Labor Cost per unit = $25.0

Overhead Cost per unit = $75.0

Total Cost per unit = Direct Material Cost per unit + Direct Labor Cost per unit + Overhead Cost per unit

Total Cost per unit = $15.0 + $25.0 + $75.0 = $115 per unit.

In the light of the given data, the total cost of each unit is determined by adding the cost of direct labor and direct materials to the overhead cost. The overhead cost per unit is determined by multiplying the predetermined overhead rate per direct labor hour with the direct labor hours. The budgeted level of production is 1,500 units, and the budgeted direct labor hours are 3,000. The budgeted manufacturing overhead cost is $75,000.The predetermined overhead rate per direct labor hour is calculated by dividing the estimated overhead by the estimated labor hours. The calculated overhead rate is $25.00 per direct labor hour.

The overhead cost of a single unit is given as follows:$25 * 3.0 = $75.0 per unitThe total cost of each unit is determined by adding the cost of direct labor and direct materials to the overhead cost. The direct material cost per unit is $15, and the direct labor cost per unit is $25. Therefore, the total cost per unit is calculated as follows:

Total Cost per unit = Direct Material Cost per unit + Direct Labor Cost per unit + Overhead Cost per unit

Total Cost per unit = $15.0 + $25.0 + $75.0 = $115 per unit.

The budgeted level of production is 1,500 units. Therefore, the budgeted cost of manufacturing overhead is $75,000 ($50 per unit x 1,500 units). The predetermined overhead rate per direct labor hour is calculated as follows:

PRED = Estimated Overhead / Estimated Labor hours= $75,000 / 3,000 = $25.00 per direct labor hour.

Learn more about predetermined overhead rate: https://brainly.com/question/29829712

#SPJ11


Related Questions

Activities on the critical path are critical because
Select one:
a. These activities evidence the largest variation in completion times.
b. These activities represent the largest expenditure for labor and materials.
c. These activities are the most difficult to manage.
d. Delay of these activities will delay project completion time.
e. None of the above
What is meant by a quality program being total when it comes to being implemented in an organization?

Answers

The correct answer for the given question is "Delay of these activities will delay project completion time." Activities on the critical path are critical because Delay of these activities will delay project completion time.

A quality program is total when it is implemented in an organization when everyone in the company participates in it. The goal of a quality program is to increase customer satisfaction while reducing the amount of waste produced by the firm.The word "total" is used because everyone from the top of the organization to the bottom is involved in the quality program, and everyone is responsible for the success of the program.

Quality control can only be achieved through collaboration. This method is more effective than relying solely on the quality control department to address quality issues.

Learn more about project completion here:https://brainly.com/question/29407885

#SPJ11

assess the number of relative prices in an exchange
economy in which there are 400 goods. calculate and choose one of
the following: a. 79800 b. 200 c. 159600 d. 19000

Answers

In an exchange economy with 400 goods, the number of relative prices can be calculated using the formula:n*(n-1)/2 where n is the number of goods. Therefore, in this case, the number of relative prices will be 400*(400-1)/2 = 79800. The number of relative prices in an exchange economy with 400 goods is 79800.

An exchange economy is a type of economic system in which goods, services, and other forms of value are traded for other goods, services, and value. In such a system, it is important to have a clear understanding of the relative prices of goods, which are the prices of one good relative to the prices of other goods. The number of relative prices in an exchange economy is given by the formula n*(n-1)/2 where n is the number of goods available for exchange.

In this case, the number of goods is 400. Therefore, the number of relative prices in this exchange economy is given by:400*(400-1)/2 = 79800. Therefore, the correct answer is (a) 79800. In an exchange economy with 400 goods, the number of relative prices can be calculated using the formula:n*(n-1)/2 where n is the number of goods. Therefore, in this case, the number of relative prices will be 400*(400-1)/2 = 79800. The number of relative prices in an exchange economy with 400 goods is 79800.

To know more about economy visit:

https://brainly.com/question/30131108

#SPJ11

gage Payment actors (principal 25 Years $5.26 5.53 5.83 6.10 6.40 6.70 7.00 7.32 7.63 7.95 8.28 8.61 8.94 51,000 of loan amount) Term Rate 4.0% 4.5% 5.0% 5.5% 6.0% 6.5% 7.0% 7.5% 8.0% 8.5% 9.0% 9.5% 10.0% 20 Years $6.04 6.30 6.57 6.84 7.12 7.41 7.69 7.99 8.28 8.59 8.89 9.20 9.52 est factors per 15 Years $7.38 7.63 7.88 8.14 8.40 8.66 8.93 9.21 9.48 9.76 10.05 10.33 10.62 Based on Exhibit 7-8, what would be the monthly mortgage payments for each of the following situations? (Round mortgage payment factors and final answers to 2 decimal places. Omit the "$" sign in your response.) $ a) A $134,000, 15-year loan at 7.0 percent APR compounded semi-annually b) A $113,000, 25-year loan at 6.0 percent APR compounded semi-annually c) A $127,000, 20-year loan at 7.5 percent APR compounded semi-annually $ $

Answers

The monthly mortgage payments for the given situations are approximately: a) $989,b) $691.56,c) $977.63

to calculate the monthly mortgage payments for each situation, we can use the mortgage payment factor from exhibit 7-8 and multiply it by the loan amount.

a) for a $134,000, 15-year loan at 7.0 percent apr compounded semi-annual:

mortgage payment factor for 15 years at 7.0% apr: 7.38

monthly mortgage payment = mortgage payment factor * loan amount

monthly mortgage payment = 7.38 * $134,000

monthly mortgage payment ≈ $989.92

b) for a $113,000, 25-year loan at 6.0 percent apr compounded semi-annually:

mortgage payment factor for 25 years at 6.0% apr: 6.12

monthly mortgage payment = mortgage payment factor * loan amount

monthly mortgage payment = 6.12 * $113,000

monthly mortgage payment ≈ $691.56

c) for a $127,000, 20-year loan at 7.5 percent apr compounded semi-annually:

mortgage payment factor for 20 years at 7.5% apr: 7.69

monthly mortgage payment = mortgage payment factor * loan amount

monthly mortgage payment = 7.69 * $127,000

monthly mortgage payment ≈ $977.63 92

Learn more about annual here:

https://brainly.com/question/29554641

#SPJ11

Harriet just inherited $50,000,000. She knows nothing about money management and has decided to educate herself in that area before making any major decisions. She has a short-term investment for that period. She has the choice between two investments: Investment A: at 6.5% compounded daily Investment B: at 7% compounded semi-annually i. Which option should she choose and why?

Answers

To determine which option Harriet should choose, we need to compare the effective annual rates of return for both investments.

Investment A:

The interest rate is 6.5% compounded daily. To calculate the effective annual rate (EAR), we can use the formula:

EAR = (1 + (r/n))^n - 1

Where:

r = annual interest rate (in decimal form)

n = number of compounding periods per year

In this case, r = 6.5% = 0.065 and n = 365 (since interest is compounded daily).

EAR_A = (1 + (0.065/365))^365 - 1

Investment B:

The interest rate is 7% compounded semi-annually. To calculate the effective annual rate (EAR), we can use the same formula as before:

EAR_B = (1 + (r/n))^n - 1

In this case, r = 7% = 0.07 and n = 2 (since interest is compounded semi-annually).

EAR_B = (1 + (0.07/2))^2 - 1

Comparing the effective annual rates (EARs) of both investments will help us determine which option Harriet should choose. The higher the EAR, the greater the return on investment.

Calculate the EARs for both investments A and B using the formulas and the given values. Then, compare the results to determine which option offers a higher effective annual rate of return.

Learn more about investing and financing activities here

brainly.com/question/18333725

#SPJ11

discuss the language of contracts and how it affects
the enforcement of contract

Answers

The language used in contracts plays a crucial role in determining their enforceable.

Enforceable refers to the ability to effectively implement and uphold the terms, conditions, or provisions of a particular agreement, contract, law, or regulation. It determines the extent to which these obligations can be legally enforced and the consequences that may be imposed if they are breached. The enforceability of a document or agreement depends on various factors, including the jurisdiction in which it is being enforced, the clarity and specificity of its provisions, and the compliance with applicable laws and regulations.

In legal contexts, enforceability is crucial because it ensures that parties involved in a contractual or legal relationship can rely on the terms and conditions agreed upon. If an agreement lacks enforceability, it becomes difficult or even impossible to hold parties accountable for their obligations or seek remedies for breaches. Enforceability provides a framework for resolving disputes, protecting rights, and maintaining order and fairness in various areas, such as business transactions, employment relationships, intellectual property rights, and civil and criminal laws.

To know more about Enforceable refer to-

brainly.com/question/31794808

#SPJ4

Two profit-maximising firms produce differentiated products at no cost and compete in prices. Letting i, j = 1,2 with ij, the inverse demand function and the corresponding demand function faced by each firm i are 2 3 Pi = 1200-9i39 and di = (1200-3p; + 2p;) (a) [5 MARKS] Find the equilibrium prices and quantities. (b) [5 MARKS] In a graph, represent the two firms' best responses and the equilibrium. (c) [5 MARKS] Suppose that the two firms merge to create a monopoly. What are the equilibrium prices and quantities? (d) [15 MARKS] Suppose that the two firms compete for infinitely many periods and agree to both set their price to the monopoly level. Moreover, both firms follow a "trigger strategy": if one firm deviates from the agreement in period t, the other sets its price to the duopoly equilibrium from period t + 1 to infinity. Let 8₁ and 82 (with 81,82 € [0, 1]) be the discount rates of firms 1 and 2, respectively. For what values of 8₁ and 2 is the collusive agreement sustainable? 1

Answers

The equilibrium prices and quantities are pi = 400/3 and qi = 400/3.

(a) the equilibrium prices and quantities are found by solving the firms' profit maximization problems. firm i's profit function is given by:  

πi = (1200 - 3pi + 2pj)pi - 0

taking the derivative with respect to pi and setting equal to zero, we get:  

1200 - 6pi + 2pj = 0

solving for pi, we get:  

pi = (1200 - 2pj)/6

substituting this into the demand function for firm i, we get:

di = (1200 - (1200 - 2pj)/6) = (1200 - 200 + pj)/3 = (400 + pj)/3  

the equilibrium price is found by setting the two demand functions equal to each other:

(400 + pj)/3 = (400 + pk)/3  

solving for pj, we get:

pj = 400  

substituting this into the equilibrium price equation, we get:

pi = (400 + 400)/3 = 400/3  

the equilibrium quantity is found by discount  substituting the equilibrium price into the demand function:

di = (400 + 400/3)/3 = 400/3 (b) the two firms' best responses are shown in the following graph. the horizontal axis shows the price of firm 1 and the vertical axis shows the price of firm 2. the solid line shows firm 1's best response curve and the dashed line shows firm 2's best response curve. the equilibrium point is where the two curves intersect.

[image of graph of two firms' best responses]

(c) if the two firms merge to create a monopoly, the monopoly price is found by setting the marginal revenue equal to zero:

mr = 1200 - 6p = 0  

solving for p, we get:  

p = 200  

the monopoly quantity is found by substituting the monopoly price into the demand function:

q = (1200 - 200)/2 = 400

Learn more about discount  here:

https://brainly.com/question/31870453

#SPJ11

caine bottling corporation is considering the purchase of a new bottling machine. The manchine would cost $200,000 and has an estimated useful life of 8 years with zero salvage value. Management estimates that the new bottling machine will provide net annual cash flows of $34,000. Management also believes the new bottling machine will save the company money because it is expected to be more reliable than other machines, and thus will reduce downtime. how much would the reduction in downtime have to be worth in order for the project to be acceptable? Assume a discount rate of 9%. (Hint: calculate the net present value)

Answers

The reduction in downtime would have to be worth more than $38,438.53 for the project to be acceptable, considering a discount rate of 9% and the given cash flows and initial investment.

How much is reduction in downtime worth for project acceptance?

To determine whether the  reduction in downtime worth for project acceptance, we need to calculate the Net Present Value (NPV) of the investment. NPV is the present value of cash inflows minus the present value of cash outflows.

Given information:

Cost of the new bottling machine (cash outflow): $200,000

Estimated useful life: 8 years

Annual net cash flow: $34,000

Discount rate: 9%

To calculate the NPV, we'll discount the net cash flows for each year and subtract the initial investment:

NPV = (Cash Flow Year 1 / (1 + Discount Rate)¹) + (Cash Flow Year 2 / (1 + Discount Rate)²) + ... + (Cash Flow Year 8 / (1 + Discount Rate)⁸) - Initial Investment

NPV = ($34,000 / (1 + 0.09)¹) + ($34,000 / (1 + 0.09)²) + ... + ($34,000 / (1 + 0.09)⁸) - $200,000

Now, let's calculate the NPV using the formula above:

NPV = ($34,000 / 1.09) + ($34,000 / 1.09²) + ($34,000 / 1.09³) + ($34,000 / 1.09⁴) + ($34,000 / 1.09⁵) + ($34,000 / 1.09⁶) + ($34,000 / 1.09⁷ ) + ($34,000 / 1.09⁸) - $200,000

NPV ≈ $26,990.95 + $24,770.92 + $22,722.71 + $20,833.49 + $19,090.43 + $17,482.88 + $15,999.89 + $14,631.20 - $200,000

NPV ≈ $161,561.47 - $200,000

NPV ≈ -$38,438.53

The NPV is negative, which means the project would result in a net loss for the company. Therefore, the reduction in downtime would have to be worth more than the negative NPV value ($38,438.53) for the project to be acceptable.

Learn more about downtime

brainly.com/question/28334501

#SPJ11

A small manufacturer developed a new high-speed packaging system that
could be appealing to food processing firms like Pillsbury and general Mills.
This new packaging system is far more efficient but must be priced 15
percent higher than competitor's products. Since purchasing manager
evaluate the "total cost of ownership" of major purchase, what selling points
should the business marketer emphasize on demonstrate the superiority of
this new product?
Leading service companies such as AT&T and FedEx measure customer
satisfaction on a quarterly basis across the global market. Discuss the
relationship between customer satisfaction and loyalty.

Answers

The selling points the business marketer should emphasize on demonstrating the superiority of the new product are that this product is more efficient, that it reduces the total cost of ownership, and that it can give a competitive edge to the food processing firms.

The new high-speed packaging system developed by a small manufacturer is more efficient than its competitors. The price of this new product is 15 percent higher than its competitors, but it reduces the total cost of ownership, which makes it more cost-effective in the long run. Purchasing managers evaluate the "total cost of ownership" of major purchases.

The new high-speed packaging system is more efficient than its competitors. It can process more packages in less time and with fewer errors. This will result in a faster and more efficient process, reducing the time and labor required to produce, package, and distribute the product.

To know more about marketer visit:-

https://brainly.com/question/8805872

#SPJ11

Suppose that you are the auditor of a major retail client who has reported the following income before taxes (IBT) for the first two quarters of the year: 1st quarter = $1,200,000 and 2nd quarter = $1,500,000. You are in the process of establishing overall materiality for the client. Based on prior years, the client has a 10% decline in IBT from the 2nd quarter to the 3rd quarter. You also know that IBT in the 4th quarter increases by 25% over the 3rd quarter.
Required:
Determine the amount of overall materiality for the audit based on these preliminary amounts. (Round your answer to the nearest thousand value.)
Amount of overall materiality
$

Answers

The amount of overall materiality for the audit based on the preliminary amounts is $150,000. This is calculated by taking the average of the IBT for the first two quarters ($1,200,000 + $1,500,000) divided by 2.

Then applying the percentage changes for the subsequent quarters (10% decline in the 3rd quarter and 25% increase in the 4th quarter). To determine the overall materiality, we start by calculating the average IBT for the first two quarters: (1,200,000 + 1,500,000) / 2 = 1,350,000.

Next, we apply the 10% decline in the 3rd quarter: 1,350,000 - (1,350,000 * 10%) = 1,215,000.

Then, we apply the 25% increase in the 4th quarter: 1,215,000 + (1,215,000 * 25%) = 1,518,750.

Finally, we round the result to the nearest thousand to obtain the overall materiality for the audit, which is $150,000.

learn more about percentage here:

https://brainly.com/question/31083257

#SPJ11

Display Budget Schedules Sheet 1 June (actual) $45,000 Gross Margin 23% July $52,000 Cash Sales 26% August $56,000 Ending Inventory 35% September $60,000 48% Inventory purchases paid in cash October $50,000 Other Expenses 8% Save your file to preserve this table. Complete the assignments on the "Display Budget Schedules" tab. 0 The company plans for each month's ending inventory to be the blue table percentage of the following month's budgeted cost of goods sold. Inventory cash purchases are shown in the blue table; the rest is paid for in the following month. The accounts payable on June 30 are the result of June purchases of inventory. All monthly expenses were paid monthly. Monthly expenses included: commissions, $9,000; rent, $1,200; other expenses (excluding depreciation), are reflected in the blue table as a percent of sales. Depreciation is $1,300 for the quarter and includes depreciation on new assets acquired during the quarter. The assets acquired for cash during the quarter included equipment of $2,100 in July and $3,000 in August. The company wishes to maintain a minimum cash balance of $3,000 at the end of each month. The company has a financing facility that allows the company to borrow in increments of $1,000 at the beginning of each month from a local bank, up to a total loan balance of $30,000. The interest rate on these loans is 1.5% per month, and interest is not compounded. The company, when able, repays the loan plus accumulated interest at the end of the quarter. Sunny and Clear, Inc. is a small wholesale distributor of consumer goods. The c generates a gross margin shown in the blue table. The percent of cash sales is blue table; the remainder is sold on account and is collected one month later. receivable on June 30, 2020 are the result of June credit sales. Actual and bud for the period were as follows: D □ 0 Required: Using the data above, for quarter ending September 2020, prepare the followin a. The schedule of the expected cash collections b. The merchandise purchases budget Additional information: c. The schedule of expected cash disbursements Merchandise purchases d. The schedule of expected cash disbursement -Selling and administrative exp e. The cash budget Current assets as of June 30: Cash f. An absorption costing income statement for the quarter ending September 20 g. A balance sheet as of September 30, 2020 Accounts receivable $4,000 $29,250 $7,100 $102,550 Inventory Buildings and equipment, net *Provide a short write up (2-3 paragraphs) of the cashflow situation at this com after you completed the budgets. What are your concerns and what would you recommend to management? Accounts payable $22,400 Capital stock $99,000 Retained earnings $21.500 L Cover Sheet Data Source T #tv A Sheet 2 -0

Answers

There is a need to ensure the cash balance at the end of each month is not less than $3,000.

Schedule of expected cash collections: The schedule of expected cash collections, for the quarter ending September 2020, is as follows: July sales $52,00026% of sales are cash collected in July $13,52074% of sales are collected in August $38,480 Total cash collections $52,000 August sales $56,00026% of sales are cash collected in August $14,56074% of sales are collected in September $41,440 Total cash collections $56,000 September sales $60,00026% of sales are cash collected in September $15,60074% of sales are collected in October $44,400 Total cash collections $60,000 The total expected cash collection is $154,960.

The company’s management can make use of this data to ensure they have enough cash on hand to cover their expenses.

To know more about cash balance visit:-

https://brainly.com/question/28388417

#SPJ11

while pointing to sturctural charecterstics of canadian economy which support it, explain harold innis's staple thesis. what specific canadian industies experienced the staples trap in the 19 th and 20th centuries

Answers

Harold Innis's staple thesis is an economic theory that emphasizes the significance of staple products in shaping the development and structure of a country's economy.

Harold Innis's staple thesis posits that staple products, which are typically natural resources or primary commodities, have played a pivotal role in shaping the economic development of countries. In the case of Canada, the country's vast size and rich natural resources have influenced its economic structure. Canada's geographical characteristics, including its expansive forests, fertile lands, and abundant mineral deposits, have given rise to staple industries.

The staples trap refers to a situation where an economy becomes overly reliant on a limited range of primary products, which can lead to economic vulnerability and hinder diversification. In Canada, this trap manifested during the 19th and 20th centuries when specific industries experienced boom and bust cycles due to fluctuations in global demand and prices for their respective staple products.

One example is the fur trade, which was a significant staple industry in Canada during the 19th century. However, overexploitation and changing fashion trends led to the decline of the fur industry, resulting in economic instability for those dependent on it.

The staples trap highlights the need for economic diversification and the development of value-added industries to mitigate the risks associated with overreliance on staple products.

Learn more about economy here : brainly.com/question/30131108

#SPJ11

When the total output rises at a decreasing rate, it exhibits the following except
a. the falling in the marginal product.
b. the property of diminishing marginal returns.
c. the portion of marginal product curve that is rising.
d. the portion of marginal product curve that is falling.

Answers

The correct answer is: c. the portion of marginal product curve that is rising.

When the total output rises at a decreasing rate, it indicates diminishing marginal returns, which means that the additional output gained from each additional unit of input decreases. This is associated with a falling marginal product, as stated in option a.
The marginal product curve represents the relationship between the input (e.g., labor) and the output produced. In the case of diminishing marginal returns, the marginal product curve exhibits a portion that is rising initially, indicating increasing marginal product as more units of input are added. However, as the input continues to increase, the marginal product eventually starts to decrease, indicating diminishing marginal returns. This is in line with option d.
Therefore, the correct statement is that "the portion of marginal product curve that is rising" does not apply when the total output rises at a decreasing rate.

Learn more about marginal link:

https://brainly.com/question/28481234

#SPJ11

Q4 What is the difference between price floors and price ceiling? Give example and illustrate graphically in support of your answer.

Answers

Price floors and price ceilings are both government-imposed interventions in the market to control prices, but they have opposite effects.

Price Floor:A price floor is a minimum price set by the government above the equilibrium price, intended to protect producers or workers.

It prevents the price from falling below a certain level, ensuring that sellers receive a higher price for their goods or services.

An example of a price floor is the minimum wage. The government sets a minimum wage level above the equilibrium wage rate to ensure workers receive a fair income.

Graphically, a price floor is represented as a horizontal line above the equilibrium price. The quantity supplied exceeds the quantity demanded, leading to a surplus.

Price Floor Graph

Price Ceiling:A price ceiling is a maximum price set by the government below the equilibrium price, aimed at protecting consumers or buyers.It prevents prices from rising above a certain level, making goods or services more affordable for consumers.

To know more about ceilings click the link below:

brainly.com/question/30704763

#SPJ11

A manufacturer is considering producing a modified 8-cylinder engines, which will require a total investment of $900,000 to purchase 6 new CNC machines. The expected yearly production capacity will be 1,000 engines per year, and each engine will be sold for $800. The annual operating cost is expected to be $600,000 per year. Each CNC machine can be sold for $5,000 after 6 years.
1) Determine the ROR for this investment
2) If the manufacture wants to make 15% ROR, what should be the extra income required?

Answers

1. The Return on Investment (ROI) for the investment in modified 8-cylinder engines is approximately 10.56%.

2. To achieve a 15% Return on Investment (ROI), the manufacturer would need an additional income of approximately $66,667.

To calculate the Return on Investment (ROI), we need to consider the total investment, annual profit, and the duration of the investment. The total investment is $900,000 for 6 CNC machines, and the annual operating cost is $600,000. The annual profit can be calculated by subtracting the operating cost from the revenue generated by selling the engines. With a production capacity of 1,000 engines per year and a sale price of $800 per engine, the annual profit is $200,000 ($800 x 1,000 - $600,000).

The Return on Investment (ROI) is determined by dividing the annual profit by the total investment and multiplying by 100 to express it as a percentage. In this case, the ROI is approximately 10.56% ($200,000 / $900,000 x 100).

To achieve a 15% Return on Investment (ROI), the manufacturer would need to increase their income. Assuming the same investment and operating costs, the extra income required can be calculated by multiplying the total investment by the desired ROI and subtracting the annual profit. In this case, the extra income required would be approximately $66,667 ($900,000 x 15% - $200,000). This additional income would help the manufacturer reach their target Return on Investment of 15%.

Learn more about Return on Investment here:

https://brainly.com/question/30064968

#SPJ11

Digicel’s Debt Burden: Reclaiming the ‘Financial Powerhouse’
Status! Up to recent times, the Digicel Group was without question
the top Telecommunications Provider in Jamaica and the Caribbean.

Answers

Digicel Group has been a prominent telecommunications provider in Jamaica and the Caribbean region. Over the years, it has established itself as a leading player in the industry, offering mobile, fixed-line, and broadband services to millions of customers.

The financial challenges of the cpomapny

However, it is important to note that Digicel has faced significant financial challenges in recent years, primarily due to its high debt burden.

The company had accumulated a substantial amount of debt as a result of its aggressive expansion and acquisition strategies in the past. These expansion efforts were aimed at establishing a strong presence in multiple markets across the Caribbean, Central America, and the Pacific.

Read more on financial crisis here https://brainly.com/question/29556449

#SPJ1

Define the bank solvency ratio. Briefly sketch the main
principles used in the computation of the risk weighted
asset (RWA) under Basel I. How do banks compute their Cooke
ratios? Their Tier I ratios?

Answers

The bank solvency ratio measures a bank's ability to meet its obligations and absorb losses. Basel I provides principles for calculating risk-weighted assets (RWA), which are used to determine the capital adequacy of banks.

The computation of RWA under Basel I is based on assigning different risk weights to various types of assets, such as loans, government bonds, and off-balance sheet exposures. Banks calculate their Cooke ratios by dividing their Tier I capital by their RWA, which helps assess their capital adequacy and ability to absorb losses. Tier I ratios are computed by dividing Tier I capital by total risk-weighted assets.

The bank solvency ratio is a financial indicator that assesses a bank's financial health and ability to meet its financial obligations. It is typically measured by comparing a bank's capital to its risk-weighted assets (RWA). The higher the solvency ratio, the more financially stable and solvent the bank is considered to be.

.To compute their Cooke ratios, banks divide their Tier I capital (which includes core capital and disclosed reserves) by their RWA. The Cooke ratio, also known as the capital adequacy ratio, helps assess a bank's capital adequacy and its ability to absorb losses. A higher Cooke ratio indicates a higher level of capital relative to the bank's risk exposure, which is generally seen as a positive indicator of financial stability.

Similarly, Tier I ratios are calculated by dividing a bank's Tier I capital by its total RWA. The Tier I ratio measures the bank's core equity capital relative to its total risk-weighted assets and provides an additional perspective on the bank's capital adequacy.

These ratios are important tools for regulators, investors, and stakeholders to evaluate the financial soundness and stability of banks and ensure they have sufficient capital to withstand potential losses and risks.

To learn more about risk-weighted assets: -brainly.com/question/26719327

#SPJ11

When a company receives cash from a customer for services previously performed on account, the journal entry will result in OA. a net increase in total assets. O B. a net decrease in total assets. OC. no change to total assets. D. a decrease in total liabilities.

Answers

When a company receives cash from a customer for services previously performed on account, the journal entry will result in a net increase in total assets. This means that option A, a net increase in total assets, is the correct answer.

When a customer pays for services previously performed on account, it means that the company is receiving cash for the accounts receivable that was recorded on its balance sheet as an asset.

By receiving cash, the company is converting its accounts receivable into cash, resulting in an increase in the cash asset account. At the same time, there is a decrease in the accounts receivable account, as the customer's outstanding balance is paid.

Since both of these accounts are assets, the net effect is an increase in total assets. Therefore, option A is the correct answer.

To learn more about balance sheet click here: brainly.com/question/28446946

#SPJ11

Question 3: (4 marks) A company made the following merchandise purchases and sales during the month of May. The company is using the perpetual inventory system. Date Explanation Unit Cost Total Cost U

Answers

The ending inventory for the month of May is 1,000 units, and the cost of goods sold is $25,730.

To calculate the ending inventory and cost of goods sold for the month of May, we need to track the units and their corresponding costs based on the provided information.

Calculate the total cost of the units available for sale:

Beginning Inventory:

500 units x $10/unit = $5,000

Purchases:

1,000 units x $12/unit = $12,000

600 units x $15/unit = $9,000

900 units x $14/unit = $12,600

Total Cost of Units Available for Sale:

$5,000 + $12,000 + $9,000 + $12,600 = $38,600

Calculate the cost of goods sold:

Cost of Goods Sold = Beginning Inventory + Purchases - Ending Inventory

To calculate the ending inventory, we need to subtract the units sold from the units available for sale.

Units sold:

800 units + 700 units + 500 units = 2,000 units

Ending Inventory = Units available for sale - Units sold

Ending Inventory = 3,000 units - 2,000 units = 1,000 units

Calculate the cost of goods sold:Cost of Goods Sold = $38,600 - (1,000 units x Cost per unit)

To calculate the cost per unit, we divide the total cost of units available for sale by the total units available for sale.

Cost per unit = $38,600 / 3,000 units = $12.87 (rounded to two decimal places)

Cost of Goods Sold = $38,600 - (1,000 units x $12.87/unit)

= $25,730

To know more about inventory, here

https://brainly.com/question/31146932

#SPJ4

--The complete question is, Q: A company made the following merchandise purchases and sales during the month of May. The company is using the perpetual inventory system. Calculate the ending inventory and cost of goods sold for the month of May based on the provided information:

May 1: Beginning Inventory - 500 units at a unit cost of $10

May 5: Purchase - 1,000 units at a unit cost of $12

May 10: Sale - 800 units

May 15: Purchase - 600 units at a unit cost of $15

May 20: Sale - 700 units

May 25: Purchase - 900 units at a unit cost of $14

May 30: Sale - 500 units--

government is considering introducing a benefit receipt system that gives a free cash grant 000GHS to individuals if they are not working. a) Assume the individual would decide to work without the benefit receipt system in place. Show both graphically and explain in your own words why the individual decides not to work anymore after the introduction of the cash grant. b) What happens to the individual's reservation wage after the introduction of the cash grant? Clearly mark the budget line that corresponds to the reservation wage both before and after the introduction of the cash grant in your graph. c) Suggest an alternative type of programme that would incentivize labour force participation. What are the advantages of this programme? Are there any disadvantages of such a programme? (In this question, just shortly describe if advantages and disadvantages exist between them).

Answers

Wage subsidies may disrupt the labour market, leading to unforeseen consequences such as the inflation of wages in the subsidized industries or unemployment rates.

Consider an individual who is not receiving the cash grant before the system is introduced and thus decides to work. According to the supply and demand framework, the price of labour (wage rate) is determined by the market supply and demand for labour. If the supply of labour is greater than the demand for labour in the market, the equilibrium wage rate will be less than if the supply of labour was low relative to the demand for labour.

When the individual was working before the introduction of the cash grant, they were supplying labour to the labour market, and the market would have determined the wage rate at which the individual was compensated for their labour.The wage rate that the individual was compensated at is equal to the reservation wage (the minimum wage rate required to supply labour) as long as they were working in a competitive labour market. If the wage rate is below the reservation wage, they will not be willing to work because they will not be earning enough to compensate them for their effort and time. If the wage rate is above the reservation wage, the individual is willing to supply labour since they believe they are being adequately compensated.The introduction of the cash grant raises the individual's income and decreases the incentive to work.

To know more about market visit:

https://brainly.com/question/15483550

#SPJ11

Interpret the benefits of communicating Key Audit Matters (KAM) and how it adds value to various stakeholders.

Answers

Communicating Key Audit Matters (KAM) in audit reports provides several benefits to various stakeholders. Firstly, it enhances transparency and accountability by highlighting the most significant areas of the audit. This helps shareholders, investors, and financial analysts gain a deeper understanding of the audit process and the specific risks and challenges faced by the audited entity.

Secondly, KAM improves the relevance and usefulness of audit reports by focusing on matters that are most important to stakeholders. It provides valuable insights into the financial health, internal controls, and overall performance of the audited entity.Additionally, KAM adds value by promoting better corporate governance. It encourages management to address and rectify key audit issues, thereby improving the reliability and accuracy of financial statements.Overall, communicating KAM fosters trust and confidence among stakeholders, facilitates informed decision-making, and ultimately contributes to the overall effectiveness and credibility of the audit process.

To learn more about Communicating   click on the link below:

brainly.com/question/32234153

#SPJ11

The Retained earnings account has a credit balance of $31,450 before closing entries are made. If total revenues for the period are $97,700, total expenses are $72,100, and dividends are $16,650, what is the ending balance in the Retained earnings account after all closing entries are made? Multiple Choice O $25,600 $31,450 $40,400 $57,050 $14,800

Answers

The ending balance in the Retained earnings account after closing entries depend on the net income or loss for the period, as well as any dividends paid.

In this case, the total revenues are $97,700, total expenses are $72,100, and dividends are $16,650. The Retained earnings account has an initial credit balance of $31,450. We need to calculate the net income and subtract the dividends to determine the ending balance. To calculate the net income, we subtract the total expenses from the total revenues: Net Income = Total Revenues - Total Expenses. In this case, the net income is $97,700 - $72,100 = $25,600. Next, we subtract the dividends of $16,650 from the net income: Ending Retained Earnings = Initial Retained Earnings + Net Income - Dividends. Plugging in the values, we get: Ending Retained Earnings = $31,450 + $25,600 - $16,650 = $40,400. Therefore, the ending balance in the Retained earnings account after all closing entries are made is $40,400.

To learn more about Retained earnings click here; brainly.com/question/31258700

#SPJ11

REQUIRED:
2. Post the accounting information from General Journal to
GENERAL LEDGER.
3. Prepare the UNADJUSTED TRIAL BALANCE.
On November 1, 2020, Aleli Gomuna purchased a pest control company from its previous owner. Aleli paid $220,000 from her personal checking account for assets consisting of pesticides supplies, $75,000

Answers

The unadjusted trial balance is useful for detecting any mathematical errors or imbalances in the accounts. It serves as a preliminary check before adjusting entries are made to ensure the accuracy of the financial statements.

Posting accounting information from General Journal to General Ledger:

To post the accounting information from the General Journal to the General Ledger, the following steps are typically followed. Each transaction recorded in the General Journal needs to be transferred to the appropriate accounts in the General Ledger.

Identify the account(s) affected by each transaction in the General Journal entry.

Locate the corresponding account(s) in the General Ledger.

Record the relevant details of the transaction, such as the date, transaction description, and debit/credit amounts, in the appropriate account(s) in the General Ledger.

Calculate and update the new balance of each account by considering the debits and credits for that account.

By systematically transferring the information from the General Journal to the General Ledger, the ledger provides a comprehensive overview of the balances and activities of each account in the accounting system. This process ensures that all transactions are accurately recorded and summarized in the appropriate accounts, facilitating the preparation of financial statements and analysis of financial data.

Preparing the unadjusted trial balance:

The unadjusted trial balance is a listing of all the accounts and their respective balances before any adjustments are made. It serves as a starting point for the preparation of financial statements.

To prepare the unadjusted trial balance, follow these steps:

Gather the account balances from the General Ledger.

List all accounts in a columnar format, with the account names and their corresponding debit or credit balances.

Total the debit and credit columns separately.

Verify that the total debits equal the total credits. If they do not balance, review the accounts and amounts to identify any errors or omissions.

Present the unadjusted trial balance with the account names and balances in a clear and organized manner.

The unadjusted trial balance is useful for detecting any mathematical errors or imbalances in the accounts. It serves as a preliminary check before adjusting entries are made to ensure the accuracy of the financial statements.

Learn more about financial statements here

https://brainly.com/question/26240841

#SPJ11

Jan. 5 Bought an X-ray machine and a supply cabinet: cost, $30,000.00, C521. X-ray machine: estimated value, $22,000.00; estimated salvage value, $0.00; estimated useful life, 5 years; plant asset No. 716; serial number, 74-3554-LB.
Feb. 26 Paid property taxes on plant assets assessed at $600,000.00. The tax rate is 1.1%. C560.
Apr. 5 Bought a testing machine for the exam room: cost, $6,500.00; estimated salvage value, $500.00; estimated useful life, 6 years; plant asset No. 717; serial number, 7-H256. C602.

Answers

It is assigned plant asset No. 717 and has the serial number 7-H256. This transaction is recorded under account C602.

Based on the information provided, the following accounting entries can be made:

January 5: Purchased an X-ray machine and a supply cabinet with a cost of $30,000.00, recorded under account C521. The X-ray machine has an estimated value of $22,000.00, no salvage value, and a useful life of 5 years. It is assigned plant asset No. 716 and has the serial number 74-3554-LB.

February 26: Paid property taxes on plant assets assessed at $600,000.00. The tax rate is 1.1%. This transaction is recorded under account C560.

April 5: Purchased a testing machine for the exam room with a cost of $6,500.00, estimated salvage value of $500.00, and an estimated useful life of 6 years. It is assigned plant asset No. 717 and has the serial number 7-H256. This transaction is recorded under account C602.

These entries reflect the acquisition of assets, payment of property taxes, and the associated details such as cost, useful life, and serial numbers. Proper recording of these transactions helps in accurately tracking the value, depreciation, and maintenance of the plant assets in the accounting records.

Learn more about transaction here

https://brainly.com/question/30023427

#SPJ11

Why is it usually okay to ignore preferred stock and short term debt?
Some of you may have picked companies with lots of debt, and others may have picked companies with little or no debt. Why is there such variation among companies?

Answers

Preferred stock and short-term debt are often ignored in financial analysis due to their specific characteristics and impact on a company's capital structure.

Preferred stock is a unique type of security that combines characteristics of both debt and equity. While it has some similarities to debt, such as the preference for receiving dividends, it also carries some equity-like features, such as potential participation in company profits.

Short-term debt, such as revolving credit lines or commercial paper, is typically a small portion of a company's total liabilities. It is used to meet short-term funding needs and is expected to be refinanced or repaid within a short period, usually less than a year. Given its temporary nature and minimal long-term impact on a company's financial position, it is often considered less significant for analysis purposes.

The variation in debt levels among companies can be attributed to various factors. Industry dynamics play a role, as capital-intensive industries like manufacturing or transportation may require more debt financing compared to service-based industries. Business strategies, such as expansion plans or acquisitions, can also drive companies to take on more debt. Risk tolerance varies among companies, with some preferring a more conservative approach and others being more comfortable with higher leverage.

Learn more about debt here : brainly.com/question/29804650

#SPJ11

In early 2020 during the start of the COVID-19 pandemic, shortages of essential items like toilet paper were seen in supermarkets. Out of the solutions listed, which would best help eliminate the shortage and reach economic efficiency in the toilet paper market during that time? O Raise price because quantity demanded is greater than quantity supplied at current prices O Keep prices the same because that is what people expect O Lower price because these items are essential

Answers

The solution that would best help eliminate the shortage and reach economic efficiency in the toilet paper market during the early stages of the COVID-19 pandemic would be to raise the price because quantity demanded is greater than quantity supplied at current prices.

By raising the price, it creates an incentive for consumers to consume less toilet paper, thereby reducing excessive demand and allowing the available supply to meet the actual demand. This approach helps to alleviate shortages and ensures that the product is allocated to those who value it the most.

Keeping prices the same or lowering the price may exacerbate the shortage and lead to further imbalances between supply and demand. In such situations, raising the price can help restore equilibrium in the market and prevent hoarding or panic-buying behavior.

Learn more about restore equilibrium here:

https://brainly.com/question/28158705

#SPJ11

TRUE / FALSE. Even though labour cost as a proportion of total cost has been decreasing in manufacturing companies, labour productivity is still the main measure being use gauge the performance of individuals and plants. Select one: True False

Answers

The given statement "Even though labour cost as a proportion of total cost has been decreasing in manufacturing companies, labour productivity is still the main measure being used to gauge the performance of individuals and plants" is FALSE.

Labour cost and labour productivity are two different terms. Although the cost of labour as a portion of total expenses in manufacturing businesses has decreased, labour productivity remains the main gauge of the output of individuals and plants. This statement is incorrect, though. Labour productivity, not labour cost, is a measure of performance. Therefore, the given statement is false.

Cost of labor is the amount paid by an employer to cover an employee's wages and benefits, plus related payroll taxes and benefits. Labor cost is an important value that finance and accounting professionals calculate to determine the direct and indirect price that a company pays for labor.

To know more about labour cost, Visit:

https://brainly.com/question/26527325

#SPJ11

Assume that the market for oil is made up of two firms: Exxon Mobil and Chevron. Also assume that New England has dozens of breweries and each of these make beers with different tastes, colors, and aromas. Which of the following statements is true?
The market structure for oil is an oligopoly, and the one for beer is monopolistic competition.
The market structure for oil is monopolistic competition, and the one for beer is an oligopoly.
The market structure for both oil and beer is an oligopoly.
The market structure for both oil and beer is monopolistic competition.

Answers

based on the information provided, the correct statement is:

the market structure for oil is an oligopoly, and the one for beer is monopolistic competition.

in the scenario described, the market for oil is characterized by two firms, exxon mobil and chevron. this indicates that the oil market is an oligopoly, which is a market structure where a few large firms dominate the industry and have substantial market power.

The market structure for oil is an oligopoly due to the dominance of exxon mobil and chevron, while the market structure for beer in new england is characterized as monopolistic competition due to the presence of numerous breweries offering differentiated products.

on the other hand, the market for beer in new england is described as having dozens of breweries, each producing beers with different tastes, colors, and aromas. this indicates a situation of monopolistic competition. monopolistic competition is a market structure where there are many firms competing with differentiated products, allowing them to have some degree of control over their prices and a level of product differentiation.

Learn more about monopolistic  here:

 https://brainly.com/question/32413508

#SPJ11

Concept Corporation has an ROI of 26%, total assets of $6,500,000, and current liabilities of $900,000. What is the company's operating income? A. $3,461,538 B. $25,000,000 C. $1,456,000 D. $1,690,000

Answers

To determine the company's operating income, we can use the formula Operating Income = ROI * Total Assets. In this case, the given ROI is 26% and the total assets amount to $6,500,000.

Operating Income = 26% * $6,500,000 = 0.26 * $6,500,000 = $1,690,000.

Therefore, the company's operating income is $1,690,000. This represents the profit generated by the company's operations before deducting interest, taxes, and non-operating expenses. It is a measure of the company's profitability and efficiency in utilizing its assets to generate income.

Option D, $1,690,000, is the correct answer.

To know more about income visit-

brainly.com/question/31886148

#SPJ11

the+yield+to+maturity+on+this+bond+when+it+was+issued+was+5.6%.+assuming+the+yield+to+maturity+remains+constant,+what+is+the+price+of+the+bond+immediately+before+it+makes+its+first+coupon+payment?

Answers

The given yield to maturity on the bond when it was issued was 5.6%. Therefore, the price of the bond immediately before it makes its first coupon payment is $1,509.70.

The price of the bond immediately before it makes its first coupon payment can be calculated using the following formula: PV = PMT / (1 + r)1 + PMT / (1 + r)2 + … PMT / (1 + r)n + F / (1 + r)n Where, PV is the present value or price of the bond, PMT is the periodic coupon payment, r is the yield to maturity, F is the face value of the bond, and n is the total number of coupon payments. Let's assume that the face value of the bond is $1000 and the coupon payment is $70. The bond has a maturity period of 5 years and makes annual coupon payments. Therefore, the total number of coupon payments will be 5.Using the formula mentioned above, we can calculate the price of the bond immediately before it makes its first coupon payment as follows: PV = $70 / (1 + 0.056)1 + $70 / (1 + 0.056)2 + $70 / (1 + 0.056)3 + $70 / (1 + 0.056)4 + $70 / (1 + 0.056)5 + $1000 / (1 + 0.056)5= $70 / 1.056 + $70 / 1.11594 + $70 / 1.17892 + $70 / 1.24697 + $70 / 1.32049 + $1000 / 1.32049= $66.23 + $62.68 + $59.32 + $56.17 + $53.21 + $712.09= $1,509.70

to know more about  periodic coupon payment visit:

https://brainly.com/question/28500948

#SPJ11

Pappy Co. owns 80% of Son Inc. During the current year, the following intercompany transactions took place:

• Son paid Pappy $48,000 for rent of office space.

• Pappy sold Son $100,000 of inventory with a gross margin of 20%. At year end, Son had sold all the goods to unrelated parties.



On their separate entity financial statements, Pappy reported net income of $875,000 and Son reported net income of $650,000.

Based on the information provided, how much would be reported as consolidated net income?

a) $1,377,000

b) $1,457,000

c) $1,505,000

d) $1,525,000

Answers

The consolidated net income would be $1,457,000 (Choice B). In the intercompany transactions, Son paid Pappy $48,000 for rent, which is an expense for Son and revenue for Pappy.

However, since it is an intercompany transaction, the revenue and expense offset each other, resulting in no impact on the consolidated net income. Pappy sold $100,000 of inventory to Son with a gross margin of 20%. The cost of goods sold for Son would be $80,000 ($100,000 - 20% gross margin), which reduces Son's net income. However, on a consolidated level, since Pappy owns 80% of Son, the consolidated financial statements eliminate the intercompany profit, resulting in a consolidated net income that includes only the profit attributable to the portion of ownership not held by Pappy. Pappy reported net income of $875,000, which includes only its own operations. Since Pappy owns 80% of Son, the portion of Son's net income attributable to the non-controlling interest is $520,000 ($650,000 × 20%). Thus, the consolidated net income is the sum of Pappy's net income ($875,000) and the non-controlling interest's share of Son's net income ($520,000), which equals $1,395,000.

Learn more about net income here:

https://brainly.com/question/31813641

#SPJ11

Other Questions
year ended ending inventory cost index december 31 at year-end costs (relative to base year) 2021 $ 308,000 1.10 2022 396,000 1.20 2023 374,400 1.17 2024 367,250 1.13 1) If a bond portfolio is immunized, the client's investment horizon is equal to the modified bond durationTrueFalse2) Segmented market hypothesis relates to any shape of yield curveTrueFalse3) "In a barbell strategy, funds are invested in both high grade and low grade bonds"TrueFalse The number of students enrolled at a college is 16,000 and grows 5% each year. Complete parts (a) through (e). example of RIGHT TRIANGLE SIMILARITY THEOREMS Which growth stage is B hotels pursuing if they are trying to open more hotel properties in the European market after opening 100 hotels in the USA?Group of answer choicesProduct developmentMarket penetrationMarket developmentDiversification A John Deere tractor, model 3405 was purchased at the price of RM80, 000.00. It is estimated that the economic life of the tractor is 10 years and the salvage value is 10% of the purchased price. Calculate a year to year depreciation using these three methods:a. Sum-of-digits depreciationb. Declining-balance depreciationc. Straight-line depreciation Question(25 marks) Pretty Heels Limited ("PH") is a listedcompany in Hong Kong engaged in manufacturing and selling ladiesshoes. It operates a factory in Shenzhen, China, and 10 retailshop "Suppose that the economy was initially in a long-runequilibrium. Then the Federal Government decided to increasegovernment spending by 1 trillion dollars on infrastructure. In an annual audit of Bridgeport Company Limited, you find thata physical inventory count on December 31, 2020, showed merchandiseof $445,000. You also discover that the following items wereexclude The area of region enclosed bythe curves y=x2 - 11 and y= - x2 + 11 ( thatis the shaded area in the figure) is ____ square units. is there a particular prominent landscape with huge mountains? Lakeland Co. had a current ratio of 2.5 last year and 2.3 this year. They had a quick ratio of 1.4 last year and 1.6 this year. Which of the following can we know? Cash increased Inventory increased C An insurer is considering offering insurance cover against a random Variable X when ECX) = Var(x) = 100 and p(x>0)=1 The insurer adopts the utility function U1(x) = x= 000lx for decision making purposes. Calculate the minimum premium that the insurer would accept for this insurance Cover when the insurers wealth w is loo. Find f^-1 (x) for f(x) = 15 + 6x. Enter the exact answer. Enclose numerators and denominators in parentheses. For example, (a - b)/(1+n). f^-1(x)= ___ for each two-tailed p-value, using the p < .05 criterion for rejection, select the correct answer per p-value (per column): work: Section 2.1 Homework Use the data set listed and technology to create frequency histograms with 5, 10, and 20 classes. Create a histogram with 10 classes. Choose the correct histogram below OA. Describe and compare the role of monetary policy in the GreatDepression and the Great Recession and explain how the financialmarkets were affected. [25 marks] Consider the Sunoil Case in Chapter 5, the capacitated plant location network optimization model. (15 points) A B D E 1 Inputs - Costs. Capacities, Demands Demand Region 2 Fixed Production and Transportation Cost per 1,000,000 Units N. America S. America Europe Asia 3 Supply Region Africa Cost (5) Capacity 9.000 4 N. America 81 92 101 130 115 20 5 S. America 117 77 108 98 100 6,750 20 6 Europe 102 105 95 119 111 9,750 20 7 Asia 115 125 90 59 74 6,150 20 8 Africa 142 100 103 105 71 6,000 20 9 Demand 12 8 14 16 n = number of potential plant locations/capacity (each level of capacity will count as a separate location) m = number of markets or demand points D; = annual demand from market j K; = potential capacity of plant i fi = annualized fixed cost of keeping plant i open Cij = cost of producing and shipping one unit from plant i to market j (cost includes pro- duction, inventory, transportation, and tariffs) y; = 1 if plant i is open, 0 otherwise Xij = quantity shipped from plant i to market j i=1,...5; j-1,...5; n=m=5 Let us suppose the capacitated plant location network optimization model is used for the SunOil case. Answer the following questions regarding the formulation of the mathematical optimization model. 1) Provide an objective function that minimized the total cost. The total cost consists of fixed cost and variable cost. Note that the variable cost is defined as the sum of production and transportation cost. (5 points) 2) Provide a constraint which ensures that the demand at each regional market should be satisfied. (5 points) 3) Provide a constraint which ensures that no plant can supply more than its capacity. (5 points) what combination of carbonyl compounds would react to form the following product? hydrogen is an element with two naturally occurring isotopes: 22h and 33h. this means that 22h, which has a mass number of 2, has fewer than 33h, which has a mass number of 3.