it can be shown that y1=e5x and y2=e−9x are solutions to the differential equation y′′ 4y′−45y=0

The approximate probability that at least 250 children will attend school in a random sample of 500 children from a remote community, based on the normal approximation of the binomial distribution, is approximately 0.987.

To solve this problem, we can use the normal approximation to the binomial distribution. The binomial distribution describes the probability of obtaining a certain number of successes (students attending school) in a fixed number of independent Bernoulli trials (each student attending school or not). In this case, the probability of a student attending school is 0.55, and the number of trials is 500.

To apply the normal approximation, we need to calculate the mean (μ) and the standard deviation (σ) of the binomial distribution. The mean is given by μ = n * p, where n is the number of trials and p is the probability of success. In this case, μ = 500 * 0.55 = 275. The standard deviation is calculated using the formula σ = sqrt(n * p * (1 - p)). Therefore, σ = sqrt(500 * 0.55 * (1 - 0.55)) ≈ 12.11.

Now, we want to find the probability that at least 250 children will attend school, which is equivalent to finding the probability of 249 or fewer children not attending school. To do this, we can use the normal distribution with mean μ and standard deviation σ, and calculate the cumulative probability up to 249. Using a standard normal table or a calculator, we find that the cumulative probability up to 249 is approximately 0.013. Therefore, the probability of at least 250 children attending school is approximately 1 - 0.013 ≈ 0.987.

Learn more about binomial distribution

brainly.com/question/29163389

#SPJ11

The exact value of the circle's diameter is 24 inches. The total distance around the outer boundary or perimeter of a circles is known as the circumference of a circle and it is a measure of the length of the circle.

The formula to find the diameter of a circle is given as;

Diameter of a circle = Circumference of a circle/π

The given circumference of a circle = 24π inches.

Diameter of the circle = (24π/π) inches = 24 inches.

Circumference is found by multiplying the diameter of the circle by mathematical constant pi (π), which is approximately 3.14159.

Therefore, the formula to calculate the circumference of a circle is:

Circumference = π × Diameter

Therefore, the exact value of the circle's diameter is 24 inches.

To know more about circle, refer

https://brainly.com/question/28162977

#SPJ11

There is no value of Q for which the above two conditions are met, the system of linear equations has no solution for any value of Q.

To reduce the system, we first need to convert the given system of linear equations into an augmented matrix.

The augmented matrix of the given system is as follows:

[tex]$$\begin{bmatrix}2 & (Q - 1) & 6 \\3 & (2Q + 1) & 9\end{bmatrix}$$[/tex]

To get the reduced row echelon form, we need to use row operations.

R2 <- R2 - (3/2)R1 will eliminate the x-coefficient in the second row:

[tex]$$\begin{bmatrix}2 & (Q - 1) & 6 \\0 & (2Q + 1) - \frac{3}{2}(Q - 1) & 9 - \frac{3}{2}(6)\end{bmatrix}$$[/tex]

[tex]$$\begin{bmatrix}2 & (Q - 1) & 6 \\0 & \frac{1}{2}Q + \frac{5}{2} & -6\end{bmatrix}$$[/tex]

Now, let's eliminate the coefficient of y in the first row by multiplying R1 by [tex]$\frac{1}{2}(2Q + 5)$[/tex] and subtracting it from 2 times

R2. R2 <- 2R2 - (2Q + 5)R1:

[tex]$$\begin{bmatrix}2Q + 5 & 0 & (2Q + 5) \cdot 3 - 6 \cdot (Q - 1) \\0 & \frac{1}{2}Q + \frac{5}{2} & -6\end{bmatrix}$$[/tex]

[tex]$$\begin{bmatrix}2Q + 5 & 0 & 9Q - 3 \\0 & \frac{1}{2}Q + \frac{5}{2} & -6\end{bmatrix}$$[/tex]

Therefore, the reduced row echelon form of the given system of linear equations is

[tex]$$\begin{bmatrix}2Q + 5 & 0 & 9Q - 3 \\0 & \frac{1}{2}Q + \frac{5}{2} & -6\end{bmatrix}$$[/tex]

If [tex]$\frac{1}{2}Q + \frac{5}{2} \neq 0$[/tex], then the system has a unique solution.

Therefore,

[tex]$$\frac{1}{2}Q + \frac{5}{2} \neq 0$$[/tex]

[tex]$$Q \neq -5$$[/tex]

Hence, the system of linear equations has a unique solution for all values of Q except[tex]Q = -5[/tex].

For the system of linear equations to have no solution, the equations must be inconsistent.

This means that the two equations represent parallel lines, and thus never intersect.

From the reduced row echelon form, we can see that this happens when the coefficient of x in the first row is equal to 0 and the constant terms on both rows are unequal.

That is,[tex]$$2Q + 5 = 0 \text{ and } 9Q - 3 \neq 0$$[/tex]

              [tex]$$Q = -\frac{5}{2}$$[/tex]

            [tex]$$9Q - 3 \neq 0$$[/tex]

To know more about conditions, visit

https://brainly.com/question/29418564

#SPJ11

The conditional PDF fx,y|A(x,y) is: $$f_{X, Y \mid A}(x, y) = \begin{cases}\frac{9}{10e^7 - 20e^5 + 6e^2} e^{-(2x + 3y)} & \text{if } 0 \leq x \leq 1 \text{ and } 0 \leq y \leq 1 - x \\0 & \text{otherwise} \end{cases}$$.

We are given that random variables X and Y have joint probability density function (PDF):

[tex]f X,Y​ (x,y)={ ce −(2x+3y) 0​  if x≥0 and y≥0otherwise​[/tex]

where c is a constant. Let A be the event that X + Y ≤ 1. We are to determine the conditional PDF f(x, y | A).

So, we have to calculate:

[tex]f X,Y∣A​ (x,y)[/tex]

Using Bayes' theorem, we have:

[tex]f X,Y∣A​ (x,y)= P(A)P(A∣X=x,Y=y)f X,Y​ (x,y)​[/tex]

Now, we will calculate each of these probabilities separately:

For P(A), let's find the range of values for x and y that satisfy X + Y ≤ 1. We have:

[tex]X + Y &\leq 1 \\Y &\leq 1 - X\end{aligned}$$[/tex]

For Y ≥ 0, we must have 0 ≤ X ≤ 1. Therefore, the region in the (x, y) plane that satisfies X + Y ≤ 1 is the triangle with vertices (0, 0), (1, 0), and (0, 1).

Hence, we have:

[tex]$$P(A) = \iint_{A} f_{X, Y}(x, y)\,dx\,dy$$$$\begin{aligned}P(A) &= \int_{0}^{1} \int_{0}^{1 - x} ce^{-(2x + 3y)}\,dy\,dx \\&= \int_{0}^{1} \left[-\frac{c}{3}e^{-(2x + 3y)}\right]_{y=0}^{y=1-x}dx \\&= \int_{0}^{1} \frac{c}{3}(e^{-2x} - e^{-5x})dx \\&= \frac{c}{3}\left[-\frac{1}{2}e^{-2x} + \frac{1}{5}e^{-5x}\right]_{x=0}^{x=1} \\&= \frac{c}{3}\left(\frac{1}{10} - \frac{1}{2e^2} + \frac{1}{5e^5}\right) \\&= \frac{c}{3}\left(\frac{10e^7 - 20e^5 + 6e^2}{100e^7}\right)\end{aligned}$$[/tex]

Now, we will find P(A | X = x, Y = y). We have:

[tex]$$\begin{aligned}P(A \mid X = x, Y = y) &= P(X + Y \leq 1 \mid X = x, Y = y) \\&= P(Y \leq 1 - x \mid X = x, Y = y) \\&= 1_{0 \leq x \leq 1} \cdot 1_{0 \leq y \leq 1 - x}\end{aligned}$$[/tex]

where 1 is the indicator function. That is, it is equal to 1 if the argument is true, and 0 otherwise.

Finally, we can find fX,Y|A(x, y) using the formula above. We get:

[tex]$$\begin{aligned}f_{X, Y \mid A}(x, y) &= \frac{P(A \mid X = x, Y = y)f_{X, Y}(x, y)}{P(A)} \\&= \frac{1_{0 \leq x \leq 1} \cdot 1_{0 \leq y \leq 1 - x} ce^{-(2x + 3y)}}{\frac{c}{3}\left(\frac{10e^7 - 20e^5 + 6e^2}{100e^7}\right)} \\&= \frac{9}{10e^7 - 20e^5 + 6e^2} \cdot e^{-(2x + 3y)} \cdot 1_{0 \leq x \leq 1} \cdot 1_{0 \leq y \leq 1 - x}\end{aligned}$$[/tex]

Therefore, the conditional PDF fx,y|A(x,y) is:

[tex]$$f_{X, Y \mid A}(x, y) = \begin{cases}\frac{9}{10e^7 - 20e^5 + 6e^2} e^{-(2x + 3y)} & \text{if } 0 \leq x \leq 1 \text{ and } 0 \leq y \leq 1 - x \\0 & \text{otherwise} \end{cases}$$[/tex]

To learn more about conditional, refer below:

https://brainly.com/question/19258518

#SPJ11

The conditional probability density function (PDF) fx,y|A(x,y) for random variables X and Y,

To find the conditional PDF fx,y|A(x,y), we need to normalize the joint PDF fx,y(x,y) over the region defined by A, which is X + Y ≤ 1. The joint PDF fx,y(x,y) is given as ce^-(2x+3y) for x ≥ 0 and y ≥ 0, and 0 otherwise.

To normalize the joint PDF over the region A, we integrate the joint PDF over the region where X + Y ≤ 1. The limits of integration will depend on the values of x and y in the given region. The resulting normalized PDF will give us the conditional PDF fx,y|A(x,y).

The specific calculation of the integral and the resulting conditional PDF would require more information about the region A, such as its shape and limits. Without this information, it is not possible to provide the exact mathematical expression for fx,y|A(x,y). However, the process of obtaining the conditional PDF involves normalizing the joint PDF over the region defined by the event A, which can be done using the given joint PDF and the limits of integration.

To learn more about probability Here :

brainly.com/question/31828911

#SPJ11

a) Constraints for line 1, line 2, and line 3 are 5X1 + 7X2 ≤ 350, X2 ≤ 50, and 2X1 + 5X2 ≤ 80 respectively.

b) Optimal solution is (X1 = 60, X2 = 20) and optimal value is 420.

c) The new optimal solution point is (X1 = 59.147, X2 = 20.678) and the new optimal value is (6.1 + 0.1T)(20.678) + 5(59.147)

d) Dual price of constraint 2X1 + 5X2 ≤ 80 is 5 when RHS is increased from 60 to 61.

a) Classify which constraints belong to line 1, line 2, and line 3 respectively:

The optimal solution of the given linear programming problem can be found using the graphical method as given below:

Line 1 represents the constraint 5X1 + 7X2 ≤ 350Line 2 represents the constraint X2 ≤ 50Line 3 represents the constraint 2X1 + 5X2 ≤ 80

b) The optimal solution and the optimal value of the objective function are:X1 = 60, X2 = 20Optimal value = 5(60) + 6(20) = 420

c) If the coefficient of X2 of the objective function changes from 6 to (6.1 + 0.1 T).

When the coefficient of X2 in the objective function changes from 6 to (6.1 + 0.1T), then the optimal solution point changes. The optimal solution point after the change in the coefficient of X2 in the objective function is given below:X1 = 59.147, X2 = 20.678

Optimal value = 5(59.147) + (6.1 + 0.1T)(20.678)

d) Find the dual price if the right-hand side for constraint I increases from 60 to 61.The optimal solution of the given linear programming problem is:X1 = 60, X2 = 20

Therefore, the slack value for the constraint 2X1 + 5X2 ≤ 80 is zero. This means that the dual price of the constraint 2X1 + 5X2 ≤ 80 is equal to the coefficient of X1 in the objective function. Dual price = 5

Know more about the linear programming

https://brainly.com/question/14309521

#SPJ11

a) Using the 68-95-99.7 rule, P(X < 8) can be calculated as approximately 0.1587. b) Using the z-table, P(X < 6.52) can be determined by finding the corresponding z-score and looking up the probability associated with that z-score.

a) The 68-95-99.7 rule states that for a normal distribution, approximately 68% of the data falls within one standard deviation of the mean, 95% falls within two standard deviations, and 99.7% falls within three standard deviations. Since we are given a normal distribution N(10,2), where 10 is the mean and 2 is the standard deviation, we can infer that P(X < 8) corresponds to the area under the curve to the left of 8. By using the 68-95-99.7 rule, we know that 68% of the data falls within one standard deviation of the mean, and since the distribution is symmetric, approximately half of that 68% is to the left of the mean. Therefore, P(X < 8) is approximately 0.5 minus half of the remaining 68%, which gives us an approximate value of 0.1587.

b) To find P(X < 6.52) using the z-table, we need to convert the value 6.52 into a z-score. The z-score measures the number of standard deviations a value is away from the mean in a standard normal distribution (mean = 0, standard deviation = 1). We can calculate the z-score using the formula z = (x - μ) / σ, where x is the given value, μ is the mean, and σ is the standard deviation. In this case, since we are given a normal distribution N(10,2), the z-score can be calculated as z = (6.52 - 10) / 2. Once we have the z-score, we can look it up in the z-table to find the corresponding probability. The probability P(X < 6.52) represents the area under the curve to the left of 6.52.

To know more about probability,

https://brainly.com/question/13946133

#SPJ11

Given the vectors a = [-1, -4, -5] and b = [6, 5, 4], we can perform various operations on them.

a) Rewriting vector a in terms of i, j, and k:

a = -1i - 4j - 5k

b) Calculating the magnitude of vectors a and b:

|a| = √((-1)² + (-4)² + (-5)²) = √(1 + 16 + 25) = √42

|b| = √(6² + 5² + 4²) = √(36 + 25 + 16) = √77

c) Expressing a + b and a - b in terms of i, j, and k:

a + b = (-1 + 6)i + (-4 + 5)j + (-5 + 4)k = 5i + 1j - 1k

a - b = (-1 - 6)i + (-4 - 5)j + (-5 - 4)k = -7i - 9j - 9k

d) Calculating the magnitude of a + b:

|a + b| = √(5² + 1² + (-1)²) = √(25 + 1 + 1) = √27 = 3√3

e) Showing that |a + b| ≤ |a| + |b|:

|a + b| = 3√3 ≤ √42 + √77 ≈ 6.48

f) Calculating the dot product of a and b:

a · b = (-1)(6) + (-4)(5) + (-5)(4) = -6 - 20 - 20 = -46

g) Finding the angle between vectors a and b:

cosθ = (a · b) / (|a| |b|) = -46 / (√42 √77) ≈ -0.448

θ ≈ arccos(-0.448) ≈ 116.1°

h) Calculating the projection of a onto b:

proj_b(a) = (a · b / |b|²) b = (-46 / 77) [6, 5, 4] = [-276/77, -230/77, -184/77]

i) Calculating the cross product of a and b:

a x b = [(-4)(4) - (-5)(5)]i - [(-1)(4) - (-5)(6)]j + [(-1)(5) - (-4)(6)]k

= [-9, -10, 1]

j) Evaluating the area of the parallelogram defined by a and b:

Area = |a x b| = √((-9)² + (-10)² + 1²

Learn more about angle here:

https://brainly.com/question/31818999

#SPJ11

The two main methodologies for detecting cointegration are the Engle-Granger and the Johansen methodologies. The Engle-Granger approach involves a two-step process. In the first step, a linear regression model is estimated using the time series variables of interest.

In the second step, the residuals from the first step are tested for stationarity using unit root tests, such as the Augmented Dickey-Fuller (ADF) test. If the residuals are stationary, it implies the presence of cointegration between the variables.

The Johansen methodology, on the other hand, directly tests for cointegration using vector autoregressive (VAR) models. It allows for the estimation of the number of cointegrating relationships present among multiple time series variables. Johansen's test involves estimating a VAR model and testing the rank of the cointegration matrix. The test provides critical values to determine the presence and number of cointegrating relationships.

The Engle-Granger methodology typically results in a single-equation model that captures the long-run relationship between the variables. The estimated coefficients represent the cointegrating vector. However, this approach assumes a linear relationship and requires careful consideration of issues like lag length selection and potential omitted variables.

The Johansen methodology, on the other hand, results in a system of equations that describes the long-run dynamics among the variables. It allows for the estimation of the cointegrating vectors and the adjustment coefficients. This approach is more flexible as it does not assume a specific functional form, but it requires determining the optimal lag length and dealing with the potential identification problem.

In summary, the Engle-Granger methodology involves a two-step process of regression and residual testing, while the Johansen methodology directly tests for cointegration using VAR models. The Engle-Granger approach provides a single-equation model, while the Johansen approach yields a system of equations. Each method has its own advantages and disadvantages, and the choice between them depends on the specific characteristics of the data and the research objective.

To know more about cointegration, refer here:

https://brainly.com/question/32329808#

#SPJ11

Linear approximation to the particle's trajectory at t = 2:r(2 + h) ≈ (3h + 8, -11h - 22, -24h - 35). Tangent to the curve at t = 2:r(s) = (3s + 8, -11s - 22, -24s - 35).

Linear approximation of r(t + h) ≈ r(t) + h * r'(t)

Here, r(t) = (2 + 3t, -1² + t + 1 - 21³ - 3t² - 1)r'(t)

= (3, 1 - 6t, -6t²)

Now, we calculate r'(2) = (3, 1 - 6(2), -6(2)²)

= (3, -11, -24)

Thus, the linear approximation to the particle's trajectory at t = 2 is given by:  r(2 + h)

≈ (2 + 3(2), -1² + (2) + 1 - 21³ - 3(2)² - 1) + h(3, -11, -24)r(2 + h)

≈ (8, -22, -35) + (3h, -11h, -24h)r(2 + h)

≈ (3h + 8, -11h - 22, -24h - 35)

To find the tangent to the curve at t = 2,

we use the formula: r(s) = r(2) + s * r'(2)

Here, r(2) = (8, -22, -35)r'(2)

= (3, -11, -24)

Thus, the equation of the tangent to the curve at t = 2 is:

r(s) = (8, -22, -35) + s(3, -11, -24)r(s)

= (3s + 8, -11s - 22, -24s - 35)

Linear approximation to the particle's trajectory at t

= 2:r(2 + h)

≈ (3h + 8, -11h - 22, -24h - 35).

Tangent to the curve at t = 2:r(s)

= (3s + 8, -11s - 22, -24s - 35).

To know more about Linear approximation, refer

https://brainly.com/question/30403460

#SPJ11

The function f : C([0, 1]) → C([0, 1]) defined byf(x) = 1 + [f(2)dt (0 ≤ x ≤ 1)110is still a contraction mapping with the same Lipschitz constant L. Therefore, by the contraction mapping theorem, f has a unique fixed point in C([0, 1]).

In the proof of the contraction mapping theorem, it is always required that the function we are going to apply it to satisfies some requirements. These requirements include the completeness of the space, which is usually a metric space, and the continuity of the function.

Theorem, Let (M, d) be a complete metric space and f : M → M be a contraction mapping with Lipschitz constant L < 1.

Now, we will use that the absolute value is smaller or equal to the supremum, which is a standard result in analysis:|h(t)| ≤ sup{|h(s)| : s ∈ [0, k]} = ||h||∞.

We can use this with h(t) = f(2)t and t ∈ [0, x].

To know more about theorem visit

https://brainly.com/question/32354105

#SPJ11

The zeros of the function are: -4i, 4i, -3, 2 and (7 - 3√17)/4. Given function is h(x) = 4x⁵ + 6x⁴ + 36x³ + 54x² - 448x - 672. Zero is -4i. Therefore, the remaining zeros of the given function can be determined by dividing the given polynomial function by (x - zero).Since the given zero is -4i.

We get:4x⁴ - 14x³ - 14x² + 66x + 168 - 64i.The quotient obtained after division is 4x⁴ - 14x³ - 14x² + 66x + 168 and -64i is the remainder. Since the degree of the quotient obtained is four, we need to find its remaining zeros which are complex or real.For finding the remaining zeros, we need to solve the equation: 4x⁴ - 14x³ - 14x² + 66x + 168 = 0.Thus, the remaining zeros are real and can be found by factoring the polynomial:4x⁴ - 14x³ - 14x² + 66x + 168= 2(x - 2)(x + 3)(2x² - 7x - 14).

To know more about function visit :-

https://brainly.com/question/30721594

#SPJ11

33. The equation is in the form of a hyperbolic equation: y² - x² = 4. It represents a hyperbolic curve with the center at the origin.

34. The equation represents an elliptic paraboloid. It can be written as 4x²y + 2z² = 0. The cross-sections parallel to the y-axis are ellipses, while the cross-sections parallel to the x-z plane are hyperbolas.

35. The equation represents an imaginary cone. It can be written as x² + 2y²z² = 0. The equation shows that the cone is symmetric with respect to the x-axis and opens upward.

36. The equation represents a hyperboloid of one sheet. It can be written as x² - y² - 4z² = -4. The hyperboloid opens upward and downward, and the cross-sections parallel to the x-y plane are hyperbolas.

37. The equation represents a sphere. It can be written as x² + y² - 2x - 6y - z = 10. The equation shows that the center of the sphere is (1, -3, 0) and the radius is √10.

38. The equation represents a hyperboloid of two sheets. It can be written as x² - y² - 4x²z + 3 = 0. The hyperboloid opens upward and downward, and the cross-sections parallel to the x-y plane are hyperbolas.

39. The equation represents an elliptic cone. It can be written as x² - y² + 4 - 4x - 2z = 0. The equation shows that the cone is symmetric with respect to the x-axis and opens upward. The cross-sections parallel to the x-z plane are ellipses.

 To  learn more about equation click here:brainly.com/question/29538993

#SPJ11

The integral ∫√(4 + x^3) dx can be expressed as a power series using the binomial series expansion. The resulting series is 4^(1/2) * (x + (1/8)(x^4/4) - (3/128)(x^7/4^2) + ...). The radius of convergence for the power series is infinite, meaning that the series converges for all values of x.

To evaluate the integral, we first rewrite the integrand as (4 + x^3)^(1/2). Using the binomial series expansion, we expand (1 + x^3/4)^(1/2) into a series. Substituting this series back into the original integral, we obtain a power series representation for the integral.

The terms of the power series involve powers of (x^3/4), and to determine the radius of convergence, we apply the ratio test. Simplifying the ratio of successive terms, we find that the limit is 1/2. Since this limit is less than 1, the series converges for all values of x within a radius of convergence centered at x = 0. Therefore, the radius of convergence for the power series representation of the integral is infinite.

To know more about power series, click here: brainly.com/question/29896893

#SPJ11

The left-hand limit of f(x) as x approaches 1 is e^1, which is approximately 2.71828. The right-hand limit of f(x) as x approaches 1 is 1^3, which is equal to 1.

The function is discontinuous at x = 1 because the left-hand limit (e^1) is not equal to the right-hand limit (1^3). In order for a function to be continuous at a specific point, the left-hand limit and the right-hand limit must be equal. However, in this case, the function takes on different values depending on whether x is less than 1 or greater than or equal to 1.

When x is less than 1, the function takes on the value of e^x, which approaches approximately 2.71828 as x approaches 1 from the left. On the other hand, when x is greater than or equal to 1, the function takes on the value of x^3, which equals 1 when x is 1. Therefore, the function has a jump discontinuity at x = 1.

The jump discontinuity occurs because the function "jumps" from one value to another at x = 1, without any intermediate values. This violates the definition of continuity, which requires the function to have a single, well-defined value at each point. Thus, the function is discontinuous at x = 1.

Learn more about limit here: brainly.com/question/12211820

#SPJ11

In part (a), we are required to show that the line integral is independent of path and use a potential function to evaluate it. The line integral is given by ∫C (z² + 2xy)dx + (x²)dy + (2xz)dz, where C runs from (2,1,3) to (4,-1,0).

In part (b), we have to perform a similar analysis for the line integral ∫C (2x cos z - x²) dx + (z-2y)dy + (y – x² sin z)dz, where C runs from (3,-2,0) to (1,0, π).

(a) To show that the line integral is independent of path, we need to demonstrate that it depends only on the endpoints and not the specific path taken. We can do this by finding a potential function f(x, y, z) such that the gradient of f equals the given vector field. Calculating the partial derivatives, we find that f(x, y, z) = xz² + x²y + C, where C is a constant. To evaluate the line integral, we can use the potential function. Evaluating f at the endpoints and subtracting the values, we obtain f(4,-1,0) - f(2,1,3) = (16)(0) + (16)(-1) + C - (4)(9) - (4)(1) - (2)(27) - C = -25. Hence, the line integral is independent of path and its value is -25.

(b) Similar to part (a), we seek a potential function for the vector field. By integrating the given components, we find f(x, y, z) = x² cos z - xy + yz - x² sin z + C, where C is a constant. Using the potential function, we evaluate f at the endpoints and find f(1,0,π) - f(3,-2,0) = (1)² cos(π) - (1)(0) + (0)(π) - (1)² sin(π) + C - (3)² cos(0) - (3)(-2) + (0)(0) - (3)² sin(0) - C = 14. Hence, the line integral is independent of path and its value is 14.

The line integral in part (a) is independent of path and evaluates to -25, while the line integral in part (b) is also independent of path and its value is 14.

To learn more about line integral click here : brainly.com/question/31422009

#SPJ11

The rate at which the average profit is changing when 177 belts have been produced and sold is 26.364 dollars per belt.

To find the rate at which the average profit is changing when x belts have been produced, we need to determine the derivative of the average profit function.

The average profit function is given by:

P(x) = R(x) - C(x),

where P(x) represents the average profit, R(x) represents the revenue, and C(x) represents the cost.

Given that R(x) = 35x and C(x) = 780 + 32x - 0.066x², we can substitute these values into the average profit function:

P(x) = 35x - (780 + 32x - 0.066x²).

Simplifying:

P(x) = 35x - 780 - 32x + 0.066x².

P(x) = -780 + 3x + 0.066x².

Now, let's find the derivative of P(x) with respect to x:

P'(x) = d/dx (-780 + 3x + 0.066x²).

P'(x) = 3 + 0.132x.

So, the rate at which the average profit is changing when x belts have been produced is given by P'(x) = 3 + 0.132x.

If we  x = 177 into the derivative equation, we can find the rate at which the average profit is changing when 177 belts have been produced:

P'(177) = 3 + 0.132(177).

P'(177) = 3 + 23.364.

P'(177) = 26.364.

Therefore, the rate at which the average profit is changing when 177 belts have been produced and sold is 26.364 dollars per belt.

To learn more about profit click here:

brainly.com/question/32535418

#SPJ11

In this problem, we are given the function f(x) = 3 + x / (2 - x). We need to determine the equation of the tangent line to f(x) at x = 10.

To find the equation of the tangent line to f(x) at x = 10, we first find the derivative of f(x) with respect to x, denoted as f'(x). The derivative represents the slope of the tangent line at any given point on the function.

Taking the derivative of f(x) using the quotient rule and simplifying, we obtain f'(x) = 5 / (2 - x)^2.

Next, we evaluate f'(x) at x = 10 to find the slope of the tangent line at that point. Substituting x = 10 into f'(x), we get f'(10) = 5 / (2 - 10)^2 = 5 / 64.

Now, we have the slope of the tangent line, and we also know that the tangent line passes through the point (10, f(10)). Substituting x = 10 into f(x), we find f(10) = 3 + 10 / (2 - 10) = -7.

Using the point-slope form of the equation of a line, which is y - y₁ = m(x - x₁), we can plug in the values of the slope (m = 5/64) and the point (x₁ = 10, y₁ = -7) to obtain the equation of the tangent line.

To learn more about quotient rule, click here:

brainly.com/question/30278964

#SPJ11

a) The confidence interval for τA - τB is:

CI = (τA - τB) ± t* * SE(τA - τB)

b) the sum of squares: SSE = (11.3 - μA)² + (11.3 - μA)²

What is the confidence interval?

A confidence interval is a range of values that is likely to contain the true value of an unknown population parameter, such as the population mean or population proportion. It is based on a sample from the population and the level of confidence chosen by the researcher.

(a) To calculate the 95% confidence interval for τA - τB, we can use the formula:

CI = (τA - τB) ± t(α/2, df) * SE(τA - τB)

where t(α/2, df) is the t-score for the desired confidence level and degrees of freedom, and SE(τA - τB) is the standard error of the difference in means.

The degrees of freedom for the test can be calculated using the formula:

df = ∑(ni - 1)

Given the data:

nA = 12, nB = 8, and mean responses: μA = 11.3, μB = 8.4, μC = 10.2

We can calculate the standard error using the formula:

SE(τA - τB) = √((s²/nA) + (s²/nB))

where s² is the sample variance.

Calculating the degrees of freedom:

df = (nA - 1) + (nB - 1) = 11 + 7 = 18

Plugging in the values, we have:

SE(τA - τB) = √((4.9/12) + (4.9/8)) ≈ 1.313

The t-score for a 95% confidence interval with 18 degrees of freedom can be found using a t-table or statistical software. Let's assume the t-score is t*.

The confidence interval for τA - τB is:

CI = (τA - τB) ± t* * SE(τA - τB)

You would need to consult a t-table or use statistical software to find the t* value. The interval would be calculated by substituting the appropriate values.

(b) To calculate the F-test statistic for the hypothesis τA = τB = τC, we can use the formula:

F = (MSA / MSE)

where MSA is the mean square due to treatments and MSE is the mean square error.

The mean square due to treatments can be calculated as:

MSA = SSA / (k - 1)

where SSA is the sum of squares due to treatments and k is the number of groups (in this case, k = 3).

The mean square error can be calculated as:

MSE = SSE / (N - k)

where SSE is the sum of squares error and N is the total sample size.

To calculate the sum of squares:

SSA = ∑(ni * (μi - μ)²)

SSE = ∑∑((yij - μi)²)

Given the data, we can calculate the sum of squares:

SSA = (12 * (11.3 - ((11.3 + 8.4 + 10.2) / 3))^2) + (8 * (8.4 - ((11.3 + 8.4 + 10.2) / 3))²) + (16 * (10.2 - ((11.3 + 8.4 + 10.2) / 3))²)

SSE = (11.3 - μA)² + (11.3 - μA)²

Hence, a) The confidence interval for τA - τB is:

CI = (τA - τB) ± t* * SE(τA - τB)

b) the sum of squares: SSE = (11.3 - μA)² + (11.3 - μA)²

To Learn more about the confidence interval here:

https://brainly.com/question/20309162

#SPJ4

The implicit expression for all solutions is Ψ(t, y) = 5y^2sin(2t) - y. The explicit solution is y(t) = ±√[1/(5sin(2t) + 1)], derived from the initial condition.

To obtain the implicit expression, we rearrange the terms in the given differential equation and collect them on one side to form Ψ(t, y). This equation represents the relationship between t and y in the differential equation, with Ψ(t, y) being a collection of constant terms.

To find the explicit expression, we use the initial condition y(π/4) = 1/4 to determine the specific constant values. Substituting this value into the implicit expression gives the explicit solution, which provides a direct relationship between t and y. In this case, y(t) is expressed in terms of t and involves the square root of the expression (5sin(2t) + 1)^(-1).

The ± sign indicates that there are two possible solutions, corresponding to the positive and negative square roots. This solution gives the value of y for any given t within the valid domain.

Learn more about Differential equation click here :brainly.com/question/14620493

#SPJ11

The solution is x₁ = 2/139, x₂ = 8/139, x₃ = -16/139, and x₄ = 11/139.

We are given the following system of equations, which we have to solve using the inverse of the coefficient matrix.

x1 + 4x2 - 3x3 - x4 =10 ....(1)

4x1 + x2 + x3 + 4x4 = 2 ....(2)

7x₁ - x₂ + x3 - x4 = -13 ....(3)

x1 - x2 - 3x3 - 2x4 = 3 ....(4)

We need to find out x₁, x₂, x₃, and x₄. For that we will start with finding the inverse of the matrix A, where A is the coefficient matrix of the given system of equations.

ax1 + bx2 + cx3 + dx4 = y ⟶ equation (1)

ex1 + fx2 + gx3 + hx4 = z ⟶ equation (2)

ix1 + jx2 + kx3 + lx4 = m ⟶ equation (3)

px1 + qx2 + rx3 + sx4 = n ⟶ equation (4)

The above set of equations can be represented in the form of matrix as below:

[A][x] = [B]

where,[A] = [a b c d; e f g h; i j k l; p q r s]

[x] = [x1; x2; x3; x4]

[B] = [y; z; m; n]

Now, the inverse of matrix [A] is[A]⁻¹ = (1/|A|)[adj(A)]

where,|A| = determinant of matrix [A]

[adj(A)] = adjugate of matrix [A]

The adjugate of matrix [A] is obtained by taking the transpose of the cofactor matrix of [A].

Cofactor of each element aᵢₖ of [A] is Cᵢₖ = (-1)^(i+k) * Mᵢₖ

where, Mᵢₖ is the determinant of the submatrix of [A] obtained by deleting the i-th row and k-th column of [A].

Therefore, our first step will be to find the inverse of matrix A, which is shown below.

Given system of equations are:

x1 + 4x2 - 3x3 - x4 = 10

4x1 + x2 + x3 + 4x4 = 27

x₁ - x₂ + x3 - x4 = -13

x1 - x2 - 3x3 - 2x4 = 3

The coefficient matrix A is given by:

[A] = [1 4 -3 -1; 4 1 1 4; 7 -1 1 -1; 1 -1 -3 -2]

Using calculator, we will find the inverse of matrix A, as shown below:

[A]⁻¹ = 1/(|A|) * [adj(A)]

where,|A| = 278

adj(A) = transpose of cofactor matrix of [A]

[A]⁻¹ = 1/278 * [2 -5 2 -1; 13 10 -13 4; -11 21 -9 2; 8 -17 10 -3]

[x] = [x1; x2; x3; x4]

[B] = [10; 2; -13; 3]

Substituting the values, we have:

[A]⁻¹ [x] = [B]

Solving for [x], we get[x] = [A]⁻¹ [B]

We have already found the inverse of matrix A.

Now we will substitute the values in the above equation and find [x], which is shown below.

[x] = [2/139; 8/139; -16/139; 11/139]

Therefore, the solution is x₁ = 2/139, x₂ = 8/139, x₃ = -16/139, and x₄ = 11/139.

Learn more about coefficient matrix at:

https://brainly.com/question/13127746

#SPJ11

The area enclosed by the curve y = 1/(1 + 3x) above the x-axis between the lines x = 2 and x = 3 is (1/3) ln(4/7).

To find the area enclosed by the curve y = 1/(1 + 3x) above the x-axis between the lines x = 2 and x = 3, we can calculate the definite integral of the function within the given interval.

The definite integral for the area can be expressed as:

A = ∫[2, 3] (1/(1 + 3x)) dx

To solve this integral, we can use the substitution method. Let u = 1 + 3x, then du = 3 dx. Rearranging the equation, we have dx = du/3.

Substituting the values, the integral becomes:

A = ∫[2, 3] (1/u) (du/3)

A = (1/3) ∫[2, 3] du/u

A = (1/3) ln|u| |[2, 3]

Now, substituting back u = 1 + 3x, we have:

A = (1/3) ln|1 + 3x| |[2, 3]

Evaluating the integral within the given limits, we get:

A = (1/3) ln|4| - (1/3) ln|7|

Simplifying further, we have:

A = (1/3) ln(4/7)

Visit here to learn more about curve:

brainly.com/question/29364263

#SPJ11

By mathematical induction, it has been proved that the derivative of f(x) = x" equals nx"-1 whenever n is a positive integer.

The given function is f(x) = x" and it is required to show that the derivative of the given function f(x) is nx"-1 whenever n is a positive integer by mathematical induction.

Mathematical induction is a technique to prove a statement for all positive integers. The proof is done by showing that the statement is true for n = 1 and then showing that if it is true for any positive integer k, then it is also true for k + 1.

Now, let's prove the statement that the derivative of f(x) = x" equals nx"-1 whenever n is a positive integer by mathematical induction.

1: Base Case

For n = 1, f(x) = x¹, and its derivative is f '(x) = 1 × x¹⁻¹ = 1 × x⁰ = 1 = 1x¹⁻¹ which is the same as nx"-1 when n = 1.

So, the statement is true for n = 1.

2: Inductive Hypothesis

Assume that the statement is true for n = k, which is,d/dx (xk) = kxk-1 ----(1)

Now, it is required to show that the statement is also true for n = k + 1, which is,d/dx (xk+1) = (k+1)xk ----(2)

3: Inductive Step

The derivative of f(x) = xk+1 is given by,d/dx (xk+1) = d/dx (xk × x) = xk d/dx (x) + x d/dx (xk) = xk × 1 + x × kxk-1 (using the Inductive Hypothesis from equation (1))= xk + kxk = (k+1) × xk

Therefore, d/dx (xk+1) = (k+1)xk, which is the same as nx"-1 when n = k + 1.

So, the statement is true for n = k + 1.

Learn more about equation at;

https://brainly.com/question/10413253

#SPJ11

Using the critical points `x` and `y`,

we can calculate `z = 40/xy`.`z` will be undefined when `y = 0`.

So, the dimensions that minimize the cost are `

[tex]x = (130)^(1/5)[/tex]` and `y = 0`.

Part 1:

The heat lost by a thermal system is given as hl.³T, where h is the heat transfer coefficient, 7 is the temperature difference from the ambient, and L is a characteristic dimension h=3 (3)

It is also given that the temperature T must not exceed 7.51/4.

Assuming that the mentioned maximum temperature is available (hence T = 7.5L/4), calculate the dimension L. that minimizes the heat loss.

We have to find the value of L that will minimize the heat loss.

Heat loss can be given as;` Hl.ΔT`where `ΔT = T − Ta`

Here, `T = 7.5L/4`Ta is the ambient temperature.

Therefore, `ΔT = T − Ta = 7.5L/4 − Ta`

If we substitute this into the above equation, we get :

Heat loss `H = hl.7.5L/4`

Temperature must not exceed `7.5/4`.

Therefore,`7.5L/4 = 7.5/4`or, `L = 1`

Therefore, dimension L that minimizes the heat loss is `1`.

Part 2:The cost C of a storage chamber is given in terms of three dimensions as `

[tex]C= 8x² +4² +52² xy`[/tex]

With the volume given as `xyz = 40`.

Recast this problem as an unconstrained problem with two `40` from the decision variables, and determine the dimensions that minimize the cost.

Substituting `z = 40/xy` into the objective function `C`, we have: `

[tex]C(x,y) = 8x² + 4y² + 52xy (40/xy)`So, `C(x,y) = 8x² + 4y² + 2080/x`[/tex]

To find the minimum value of `C`, we can take partial derivatives of `C(x,y)` with respect to `x` and y.

`[tex]∂C/∂x = 16x − 2080/x²[/tex]`

and `

[tex]∂C/∂y = 8y + 0[/tex]

`Setting these derivatives equal to zero and solving for `x` and `y`, we obtain:`

16x − 2080/x² = 0`or, `x⁵ = 130`and `y = 0`

Using the critical points `x` and `y`, we can calculate `z = 40/xy`.`z` will be undefined when `y = 0`.So, the dimensions that minimize the cost are `x = (130)^(1/5)` and `y = 0`.

To know more about points visit:

https://brainly.com/question/30891638

#SPJ11

Using the linear approximation formula, we can show that for small values of θ, the expression t^θ² is approximately equal to 1 + θ². This approximation holds when θ is close to zero.

To apply the linear approximation formula, we choose f(x) = x^θ² and consider a small change ∆r in the variable x. According to the linear approximation formula, f(x + ∆r) ≈ f(x) + f'(x) ∆r.Taking the derivative of f(x) = x^θ² with respect to x, we have f'(x) = θ²x^(θ² - 1). Now, let's evaluate the expression f(x + ∆r) using the linear approximation formula:

f(x + ∆r) ≈ f(x) + f'(x) ∆r

(x + ∆r)^θ² ≈ x^θ² + θ²x^(θ² - 1) ∆r.

When θ is small (close to zero), we can neglect higher-order terms involving θ² or higher powers of θ. Thus, we can approximate x^(θ² - 1) as 1 since the exponent θ² - 1 will be close to zero. Simplifying the expression, we have:

(x + ∆r)^θ² ≈ x^θ² + θ² ∆r.

Now, we substitute t for x and ∆y for (x + ∆r)^θ² to match the given expression t^θ². This gives us:

t^θ² ≈ f(t + ∆r) ≈ f(t) + f'(t) ∆r

≈ t^θ² + θ² ∆r.

Since θ is small, the term θ² ∆r can be considered negligible. Therefore, we have:t^θ² ≈ t^θ² + θ² ∆r ≈ t^θ² + 0 ≈ t^θ².

Hence, for small values of θ, we can approximate t^θ² as 1 + θ².

To learn more about linear approximation click here :

brainly.com/question/30403460

#SPJ11

The equation for the plane containing lines ₁ and ₂ is: x - y - 2z = 3

To obtain the equation for the plane containing lines ₁ and ₂, we need to obtain a vector that is orthogonal (perpendicular) to both lines. This vector will serve as the normal vector to the plane.

First, let's find the direction vectors of lines ₁ and ₂:

Direction vector of line ₁ = (1, 1, 1)

Direction vector of line ₂ = (1, -1, 0)

To find a vector orthogonal to both of these direction vectors, we can take their cross product:

Normal vector = (1, 1, 1) × (1, -1, 0)

Using the cross product formula:

i   j   k

1   1   1

1  -1   0

= (1 * 0 - 1 * (-1), -1 * 1 - 1 * 0, 1 * (-1) - 1 * 1)

= (1, -1, -2)

Now that we have the normal vector, we can use it along with any point on one of the lines (₁ or ₂) to form the equation of the plane.

Let's use line ₁ and the point (1, 0, -1) on it.

The equation for the plane is given by:

Ax + By + Cz = D

Substituting the values we have:

1x + (-1)y + (-2)z = D

x - y - 2z = D

To find D, we substitute the coordinates of the point (1, 0, -1) into the equation:

1 - 0 - 2(-1) = D

1 + 2 = D

D = 3

Therefore, the equation is x - y - 2z = 3

To know more about plane containing lines refer here:

https://brainly.com/question/31732621#

#SPJ11

To find the points on the curve where the tangent line is horizontal or vertical, we need to find the derivative of the curve and set it equal to zero for horizontal tangents.

To find the points where the derivative is undefined for vertical tangents.

Given the parametric equations:

x = 1 + cos(t)

y = 1 - sin(t)

Let's find the derivative of y with respect to x using the chain rule:

dy/dx = (dy/dt) / (dx/dt)

To find dy/dt and dx/dt, we differentiate each equation with respect to t:

dx/dt = -sin(t) (derivative of cos(t) is -sin(t))

dy/dt = -cos(t) (derivative of -sin(t) is -cos(t))

Now, we can calculate dy/dx:

dy/dx = (dy/dt) / (dx/dt) = (-cos(t)) / (-sin(t)) = cos(t) / sin(t)

To find the points where the tangent line is horizontal, we set dy/dx equal to zero:

cos(t) / sin(t) = 0

Since sin(t) cannot be zero (as it would lead to division by zero), we conclude that the tangent line is horizontal when cos(t) = 0.

The values of t that satisfy cos(t) = 0 are t = π/2 and t = 3π/2.

Now, let's find the corresponding points on the curve:

For t = π/2:

x = 1 + cos(π/2) = 1

y = 1 - sin(π/2) = 1 - 1 = 0

For t = 3π/2:

x = 1 + cos(3π/2) = 1

y = 1 - sin(3π/2) = 1 + 1 = 2

Therefore, the points on the curve where the tangent line is horizontal are (1, 0) and (1, 2).

To find the points where the tangent line is vertical, we need to determine where the derivative dy/dx is undefined. This occurs when the denominator of dy/dx is zero: sin(t) = 0

The values of t that satisfy sin(t) = 0 are t = 0 and t = π.

Now, let's find the corresponding points on the curve:

For t = 0:

x = 1 + cos(0) = 1 + 1 = 2

y = 1 - sin(0) = 1 - 0 = 1

For t = π:

x = 1 + cos(π) = 1 - 1 = 0

y = 1 - sin(π) = 1 - 0 = 1

Therefore, the points on the curve where the tangent line is vertical are (2, 1) and (0, 1).

In summary, the points on the curve where the tangent line is horizontal are (1, 0) and (1, 2), while the points where the tangent line is vertical are (2, 1) and (0, 1).

To learn more about tangent line visit:

brainly.com/question/32252327

#SPJ11

If the training did work, but the p-value was higher than 0.05, it would be an example of a Type II error.

Type II error occurs when we fail to reject the null hypothesis, even though the alternative hypothesis is true. In other words, it is the incorrect acceptance of a false null hypothesis. In the context of hypothesis testing, a higher p-value indicates weaker evidence against the null hypothesis. If the training did have an effect (alternative hypothesis is true), but the p-value is higher than 0.05 (commonly chosen significance level), it suggests that we failed to find statistically significant evidence to reject the null hypothesis.

So, in this case, it would be an example of a Type II error.

Learn more about significance level here:

https://brainly.com/question/31366953

#SPJ11

The slope of secant line joining (1, f(1)) and (9, f(9)) = 3, the slope of secant line joining (5, f(5)) and (5+h, f(5 + h)) = h + 3, the slope of the tangent line at (5, f(5)) is given as 4, the equation of the tangent line at (5, f(5)) is y = 4x - 30.

(A) To find the slope of the secant line joining (1, f(1)) and (9, f(9)), we need to calculate the difference in y-values divided by the difference in x-values:

Slope of secant line = (f(9) - f(1)) / (9 - 1)

Plugging in the function f(x) = x² - 7x:

Slope of secant line = ((9)² - 7(9)) - ((1)² - 7(1)) / (9 - 1)

Slope of secant line = (81 - 63) - (1 - 7) / 8

Slope of secant line = 18 - (-6) / 8

Slope of secant line = 24 / 8

Slope of secant line = 3

(B) To find the slope of the secant line joining (5, f(5)) and (5+h, f(5 + h)), we need to calculate the difference in y-values divided by the difference in x-values:

Slope of secant line = (f(5 + h) - f(5)) / (5 + h - 5)

Plugging in the function f(x) = x² - 7x:

Slope of secant line = ((5 + h)² - 7(5 + h)) - (5² - 7(5)) / (h)

Slope of secant line = (25 + 10h + h² - 35 - 7h) - (25 - 35) / h

Slope of secant line = (10h + h² - 7h + 35 - 35) / h

Slope of secant line = (h² + 3h) / h

Slope of secant line = h + 3

(C) The slope of the tangent line at (5, f(5)) is given as 4.

(D) To find the equation of the tangent line at (5, f(5)), we have the point (5, f(5)) and the slope (4). We can use the point-slope form of a line to find the equation:

y - y1 = m(x - x1)

Plugging in the values:

y - f(5) = 4(x - 5)

Using the function f(x) = x² - 7x:

y - (5² - 7(5)) = 4(x - 5)

y - (25 - 35) = 4(x - 5)

y - (-10) = 4(x - 5)

y + 10 = 4x - 20

Rearranging the equation:

y = 4x - 30

Therefore, the equation of the tangent line at (5, f(5)) is y = 4x - 30.

To know more about equation of the tangent line, click here: brainly.com/question/6617153

#SPJ11

The rate of production of the new cell phone is given by the function P(t) = 50(2t + 150), where t represents the number of days. To calculate the total number of telephones produced during the first 3 months (90 days), we need to find the integral of the production rate function over the given time interval.

The rate of production of the telephone is represented by the function P(t) = 50(2t + 150), where t is the number of days. This function gives us the number of units produced per day. To find the total number of telephones produced during the first 3 months (90 days), we need to calculate the integral of the production rate function over the interval [0, 90].

Using integral calculus, we can evaluate the integral ∫P(t) dt from 0 to 90 to find the total number of telephones produced during the given time period. By substituting the limits of integration and evaluating the integral, we can determine the final result.

It is important to note that the production rate function is linear, meaning the rate of production increases linearly with time. By integrating the function over the specified time interval, we can find the cumulative number of telephones produced during the first 3 months (90 days).

To learn more about integral, click here:

brainly.com/question/31059545

#SPJ11

Exercise 6 : The value of Q that maximizes total revenue is 500. Exercise 7:  AC = (100 + 2Q)/Q. Exercise 8: (a) The levels of output that give a profit of 31 are 14.5 and 3.5 ;  (b) The maximum profit is 81 and the value of Q at which it is achieved is 9.

Exercise 6 :

Given the demand function P = 1000-Q express TR as a function of Q and sketch a graph of TR against Q.

Total Revenue (TR) is calculated by multiplying the price (P) with the quantity demanded (Q).

P= 1000-Q, so the equation for Total Revenue will be:

TR= P x Q

= (1000-Q) Q

= 1000Q - Q²

We can see that the Total Revenue is maximized when Q = 500, so we have to find the price corresponding to it.

Now, when Q = 500,

P = 1000 - Q =

1000 - 500

= 500

Therefore, the value of Q that maximizes total revenue is 500 and the corresponding price is 500.

Exercise 7: Given that fixed costs are 100 and that variable costs are 2 per unit, express TC and AC as functions of Q and hence sketch their graphs.

Total Cost (TC) = Fixed Cost (FC) + Variable Cost (VC) x Quantity demanded (Q)

TC = 100 + 2Q

Also, Average Cost (AC) = Total Cost (TC) / Quantity demanded (Q)

AC = (100 + 2Q)/Q

Exercise 8: If fixed costs are 25, variable costs per unit are 2, and the demand function is P=20-Q, obtain an expression for π in terms of Q and sketch its graph.

Profit (π) is calculated by subtracting the Total Cost (TC) from the Total Revenue (TR).

TR = P x Q

= (20 - Q)Q

= 20Q - Q²

TC = FC + VC x Q

= 25 + 2Q

Therefore,

π = TR - TC

= (20Q - Q²) - (25 + 2Q)

= - Q² + 18Q - 25

a) Find the levels of output which give a profit of 31.

π = - Q² + 18Q - 25

Let's set

π = 31.- Q² + 18Q - 25

= 31- Q² + 18Q - 56

= 0

Now, we can solve this quadratic equation to get the values of Q.

Q = [18 ± √(18² - 4(-1)(-56))]/2Q

= [18 ± 10√10]/2Q

= 9 ± 5√10

Therefore, the levels of output that give a profit of 31 are approximately 14.5 and 3.5

b) Find the maximum profit and the value of Q at which it is achieved.

π = - Q² + 18Q - 25

We can find the value of Q that maximizes profit by using the formula

Q = - b/2a (where a = -1, b = 18)

Q = -18 / 2(-1)

= 9

Now, we can find the maximum profit by substituting Q = 9 in the expression for π.

π = - Q² + 18Q - 25

= - 9² + 18(9) - 25

= 81

Therefore, the maximum profit is 81 and the value of Q at which it is achieved is 9.

Know more about the demand function

https://brainly.com/question/13865842

#SPJ11