To find the probability P(X = 8) for a binomial random variable X with an expected value of 12.35 and a variance of 4.3225, we need to use the binomial probability formula.
For a binomial random variable X with expected value μ and variance σ^2, the probability mass function (PMF) is given by the binomial probability formula: P(X = k) = (nCk) * p^k * (1-p)^(n-k), where n is the number of trials, p is the probability of success, and k is the number of successes.
Given that the expected value μ = 12.35 and variance σ^2 = 4.3225, we can use these values to find the value of p. The variance of a binomial random variable is given by σ^2 = n * p * (1-p), so we can solve for p. 4.3225 = n * p * (1-p) Since we don't have the value of n, we can't directly solve for p. However, we can use the fact that the expected value μ = n * p. Therefore, we have 12.35 = n * p, and we can solve for p: p = 12.35 / n.
Now that we have the value of p, we can substitute it into the binomial probability formula to find P(X = 8). P(X = 8) = (nC8) * (12.35 / n)^8 * (1 - 12.35 / n)^(n-8) Unfortunately, without knowing the value of n, we cannot directly calculate the exact probability. Therefore, we need to approximate the probability using the options provided. By substituting different values of n from the given options and comparing the resulting probabilities, we can determine the closest approximation to the actual probability.
Learn more about binomials here:brainly.com/question/30339327
#SPJ11
11. Sketch a possible function with the following properties:
f<-2 on x (-[infinity],-3)
f(-3) > 0
f≥ 1 on x (-3,2)
f(3) = 0
lim f = 0
The steps to draw graph of the function is given below.
The given function satisfies the following conditions:
f<-2 on x (-[infinity],-3)f(-3) > 0f ≥ 1 on x (-3,2)
f(3) = 0lim f
= 0
To sketch the graph of the given function, follow the steps given below:
Step 1: Plot the point (-3, y) where y > 0.
Step 2: Plot the point (3, 0).
Step 3: Draw a vertical asymptote at x = -3 and
a horizontal asymptote at y = 0.
Step 4: Since f<-2 on x (-[infinity],-3), draw a line with a slope that is negative and very steep.
Step 5: Since f ≥ 1 on x (-3,2), draw a horizontal line at y = 1.
Step 6: Sketch a curve from the point (-3, y) to (2, 1).
Step 7: Sketch a curve from (2, 1) to (3, 0).
To know more about graph visit
https://brainly.com/question/19040584
#SPJ11
"III. Find the derivative of
x²(x-1)/ x
in two ways:
.
A. Simplify the expression and then use the Product Rule.
B. Use the Quotient Rule."
The derivative of x²(x-1)/x using the Product Rule is 2x - 1, and using the Quotient Rule is also 2x - 1.
The first approach involves simplifying the expression to x(x-1) and using the Product Rule to differentiate each term separately. Applying the rule, we obtained the derivative 2x - 1. The second approach used the Quotient Rule directly.
We identified f(x) = x²(x-1) and g(x) = x, differentiated them to find f'(x) and g'(x), and applied the Quotient Rule formula. Simplifying the expression, we obtained the same derivative, 2x - 1.
Both methods yield the same result, confirming the correctness of the derivative calculation. Thus, the derivative of x²(x-1)/x is 2x - 1.
Learn more about Derivative click here :brainly.com/question/28376218
#SPJ11
Use the algebraic tests to check for symmetry with respect to both axes and the origin. (Select all that apply.) x^2 - y = 6 a. x-axis symmetry b. y-axis symmetry c. origin symmetry d. no symmetry
The function is symmetric with respect to the origin, and the answer is option c, origin symmetry.
The algebraic tests are used to determine whether the curve is symmetric to the y-axis, the x-axis, and the origin.
Let's check for symmetry with respect to each axis and the origin. [tex]x² - y = 6[/tex]
Since x² and -y are both even, this equation is symmetric with respect to the y-axis.
Thus, y-axis symmetry is applicable to this function. [tex]x² - y = 6[/tex]
Since the equation is of form [tex]f(x) = g(-x)[/tex], it is an odd function, which means it is symmetric with respect to the origin.
Therefore, the function is symmetric with respect to the origin, and the answer is option c, origin symmetry.
Know more about function here:
https://brainly.com/question/11624077
#SPJ11
Find all scalars k such that u = [k, -k, k] is a unit vector. (3) (3 marks) Let u, v be two vectors such that ||u+v|| = 2, and ||u – v|| = 4. Find the dot product u. v.
Find all scalars k such that u = [k, -k, k] is a unit vector.
Since the norm of a vector u = [k, -k, k] is sqrt(k^2 + (-k)^2 + k^2), the condition for u to be a unit vector can be represented by this equation: sqrt(k^2 + k^2 + k^2) = sqrt(3k^2) = 1
which implies k = ±1/sqrt(3).
Therefore, the possible values of k are -1/sqrt(3) and 1/sqrt(3).
Let u, v be two vectors such that
||u+v|| = 2, and ||u – v|| = 4.
Find the dot product u . v To solve for the dot product u.v, use the identity
(||u+v||)^2 + (||u-v||)^2 = 2(u.v)2 + 2||u||^2||v||^2Since ||u+v|| = 2 and ||u-v|| = 4,
substitute them in the above identity to get: 2^2 + 4^2 = 2(u.v) + 2||u||^2||v||^2which simplifies to: 20 = 2(u.v) + 2(||u|| ||v||)^2 = 2(u.v) + 2||u||^2||v||^2
Substitute ||u|| = ||v||
= sqrt(u.u)
= sqrt(v.v)
= sqrt(k^2 + (-k)^2 + k^2)
= sqrt(3k^2) to obtain: 20
= 2(u.v) + 2(3k^2)^2= 2(u.v) + 18k^2
Solve the above equation for u.v: 2(u.v) = 20 - 18k^2u.v = (20 - 18k^2)/2 = 10 - 9k^2
Answer: The values of k are -1/sqrt(3) and 1/sqrt(3).
The dot product u.v is 10 - 9k^2, where k is a scalar.
To know more about vector visit:-
https://brainly.com/question/31180849
#SPJ11
- BSE 301 Solve Separable D.E 1 In y dx + dy = 0 x-2 y Select one:
a. In(x-2) + (Iny)²+ c
b. In (In x) + In y + c
c. Iny2 + In (x-2) + C
d. In (x - 2) + In y + c
The correct answer is d. In (x - 2) + In y + c. To solve the separable differential equation.
We need to separate the variables and integrate each side separately.
The given differential equation is:
y dx + dy = 0
Separating the variables, we have:
y dy = -dx
Now, let's integrate both sides:
Integrating the left side:
∫y dy = ∫-dx
Integrating the right side gives us:
(1/2)y^2 = -x + C1
Simplifying the equation, we get:
y^2 = -2x + C2
Taking the square root of both sides:
y = ±√(-2x + C2)
Now, let's compare the options provided:
a. In(x-2) + (Iny)²+ c
b. In (In x) + In y + c
c. Iny2 + In (x-2) + C
d. In (x - 2) + In y + c
From the options, the correct answer is d. In (x - 2) + In y + c, which matches the form of the solution we obtained.
Therefore, the correct answer is option d.
To know more about differential equation,
https://brainly.com/question/31492438#
#SPJ11
An instructor believes that students do not retain as much information from a lecture on a Friday compared to a Monday. To test this belief, the instructor teaches a small sample of college students some preselected material from a single topic on statistics on a Friday and on a Monday. All students received a test on the material. The differences in test scores for material taught on Friday minus Monday are listed in the following table.
Difference Scores (Friday − Monday) −1.7 +3.3 +4.3 +6.2 +1.1
(a) Find the confidence limits at a 95% CI for these related samples. (Round your answers to two decimal places.) to
(b) Can we conclude that students retained more of the material taught in the Friday class?
Yes, because 0 lies outside of the 95% CI. No, because 0 is contained within the 95% CI.
Therefore, the confidence limits at a 95% CI for these related samples are approximately -2.03 and 6.11.
To find the confidence limits at a 95% confidence interval (CI) for the differences in test scores, we can calculate the mean and standard deviation of the sample.
Given the differences in test scores: -1.7, +3.3, +4.3, +6.2, and +1.1.
Step 1: Calculate the mean of the differences
Mean =[tex](-1.7 + 3.3 + 4.3 + 6.2 + 1.1) / 5[/tex]
= 2.04
Step 2: Calculate the standard deviation of the differences
Standard deviation:
= √([(-1.7 - 2.04)² + (3.3 - 2.04)² + (4.3 - 2.04)² + (6.2 - 2.04)² + (1.1 - 2.04)²] / 4)
= √(43.52 / 4)
= √(10.88)
= 3.30 (approximately)
Step 3: Calculate the standard error of the mean (SEM)
SEM = standard deviation / √(n)
= 3.30 / √(5)
= 1.47 (approximately)
Step 4: Calculate the margin of error (ME) at a 95% CI
ME = critical value * SEM
Since the sample size is small (n = 5), we need to use the t-distribution. At a 95% confidence level with 4 degrees of freedom (n - 1 = 5 - 1 = 4), the critical value is approximately 2.776.
ME = 2.776 * 1.47
= 4.07 (approximately)
Step 5: Calculate the confidence limits
Lower limit = mean - ME
= 2.04 - 4.07
= -2.03 (approximately)
Upper limit = mean + ME
= 2.04 + 4.07
= 6.11 (approximately)
(b) No, because 0 is contained within the 95% CI. The confidence interval includes the value of 0, which suggests that there is a possibility that there is no significant difference in retention between the Friday and Monday classes. Therefore, based on the given information, we cannot conclude that students retained more of the material taught in the Friday class.
To know more about confidence limits,
https://brainly.com/question/32098370
#SPJ11
which of the points A (0,-2), B(-3,1),c(1,1) is on the line y-3x=-2
?
The point A(0,-2) is on the line y-3x=-2. So, the answer is A(0,-2).
Given the line equation
y-3x=-2,
we are to find the point among A(0,-2), B(-3,1) and C(1,1) which lies on this line.
To check if a point lies on a line, we substitute the values of x and y into the equation of the line. If the equation holds true, then the point lies on the line. If it doesn't, the point does not lie on the line.
Let us check for point A(0,-2)
Whether A(0,-2) lies on
y - 3x = -2
is determined by whether or not the following equation holds true:
-2 - 3(0) = -2LHS = -2RHS = -2
Therefore, point A(0,-2) is on the line
y-3x=-2.
So, the answer is A(0,-2).
To know more about line y-3x=-2 visit:
https://brainly.com/question/30177779
#SPJ11
Solve the initial value problem
2xy−9x2+(2y+x2+1)dydx=0,y(0)=−3,
using exact equations.
Exact First-Order Differential Equation:
In a differentiable function f(x,y)
over a domain such that f(x,y)=C, where C is a constant, the total differential df(x,y)=0 defines a precise differential equation We check to see if it is correct. If not, we find the integrating factor that makes it exact and then solve it by comparing it to the fact df=∂f∂x dx+∂f∂y dy.
The solution of the given initial value problem, 2xy−9x²+(2y+x²+1)dy/dx=0, y(0)=−3, using exact equations is 6y(x² + 2y + 1)e^(3y²+cy) + e^(3y²+cy)(x² - 18x) = C, where C is a constant.
Given the initial value problem, 2xy − 9x² + (2y + x² + 1) dy/dx = 0, y(0) = -3, using exact equations. To solve the above initial value problem, we need to check whether it is an exact differential equation or not. Then we need to use integrating factor to make it exact if it is not exact. Let us check the given initial value problem whether it is exact or not. Using the given equation 2xy − 9x² + (2y + x² + 1) dy/dx = 0Rearrange the given equation to obtain, M(x,y)dx + N(x,y)dy = 0where M(x,y) = 2xy - 9x² and N(x,y) = 2y + x² + 1Differentiate M(x,y) w.r.t y and differentiate N(x,y) w.r.t x to get ∂M/∂y = 2x and ∂N/∂x = 2xBut ∂M/∂y ≠ ∂N/∂x. So the given initial value problem is not exact. To make the given initial value problem exact, we need to use the integrating factor. To find the integrating factor, multiply the given differential equation with integrating factor µ(x,y).i.e. µ(x,y)[2xy − 9x² + (2y + x² + 1) dy/dx] = 0Rearrange the above equation by considering the product rule of differentiation. i.e. [µ(x,y)(2xy - 9x²)dx] + [µ(x,y)(x² + 2y + 1)dy] = 0For the above equation to be exact, ∂/∂y(µ(x,y)(2xy - 9x²)) = ∂/∂x(µ(x,y)(x² + 2y + 1)).Now, ∂/∂y(µ(x,y)(2xy - 9x²)) = 2xµ(x,y) + ∂µ(x,y)/∂y(2xy - 9x²) -----(1)∂/∂x(µ(x,y)(x² + 2y + 1)) = µ(x,y)2x + ∂µ(x,y)/∂x(x² + 2y + 1) -----(2)On comparing the equations (1) and (2), we get ∂µ(x,y)/∂x = 0So µ(x,y) = f(y)where f(y) is an arbitrary function of y.Substituting µ(x,y) = f(y) in equation (1) and equating it to 0, we get df/dy = (2xy - 9x²)/f(y)Integrating the above equation w.r.t y, we get f(y) = e^(3y²+cy)where c is the constant of integration.Now the integrating factor is µ(x,y) = e^(3y²+cy)Using the integrating factor µ(x,y), we can make the given initial value problem exact. Multiply the integrating factor on both sides of the given initial value problem, we getµ(x,y) [2xy − 9x²] dx + µ(x,y) [2y + x² + 1] dy = 0Substituting the value of integrating factor in the above equation and simplifying, we get(2xye^(3y²+cy) − 9x²e^(3y²+cy) + e^(3y²+cy)(x² + 2y + 1))dy + e^(3y²+cy)(2xy - 18x)dx = 0Let M(x,y) = e^(3y²+cy)(x² + 2y + 1)and N(x,y) = e^(3y²+cy)(2xy - 18x)Then ∂M/∂y = 6ye^(3y²+cy)(x² + 2y + 1) + e^(3y²+cy)(2x)And ∂N/∂x = e^(3y²+cy)(2y - 18)Substituting the values of M(x,y) and N(x,y) in the equation M(x,y)dx + N(x,y)dy = 0, we get(6ye^(3y²+cy)(x² + 2y + 1) + e^(3y²+cy)(2x)) dx + e^(3y²+cy)(2y - 18) dy = 0
Know more about initial value problem here:
https://brainly.com/question/30466257
#SPJ11
Fill in the blanks to complete the following multiplication (enter only whole numbers): (2x-1/2)² = x² Note: the last term is a fraction, whose numerator and denominator must be entered by you. 1 pts
The value of the fraction in the given expression is [tex]1/6[/tex].
We are given the expression as [tex](2x - 1/2)^2 = x^2[/tex].
The given equation can be written as [tex](2x - 1/2) x (2x - 1/2) = x^2[/tex].
Expanding the left-hand side we get [tex]4x^2 - 2x + 1/4 = x^2[/tex].
On solving the above equation we get [tex]3x^2 - 2x + 1/4 = 0[/tex].
Using the quadratic formula, we get the roots as [tex]x =[/tex] [tex][2± \sqrt{2}]/6[/tex].
So, the value of the fraction in the given expression is [tex]1/6[/tex].
Thus, the solution to the above equation is
[tex](2x - 1/2)^2 = x^2[/tex]
[tex](2x - 1/2) x (2x - 1/2) = x^2[/tex] and the value of the fraction in the given expression is [tex]1/6[/tex].
Learn more about quadratic formula here:
https://brainly.com/question/22103544
#SPJ11
Two men, A and B, who usually commute to work together decide to conduct an experiment to see whether one route is faster than the other. The men feel that their driving habits are approximately the same, so each morning for two weeks one driver is assigned to route I and the other to route 11. The times, recorded to the nearest minute, are shown in the following table. Using this data, find the 80 % confidence interval for the true mean difference between the average travel time for route I and the average travel time for route II Let d = (route l travel time)-(route ll travel time) . Assume that the populations of travel times are normally distributed for both routes. Day M Tu W Th F M Tu W Th F Route 32 2524 31 29 28 3029 30 34 Route I30 24 25 34 26 26 27 24 28 32 Copy Data Step 1 of 4: Find the mean of the paired differences, d. Round your answer to one decimal place. Answer(How to Enter) 2 Points Keypad Two men, A and B, who usually commute to work together decide to conduct an experiment to see whether one route is faster than the other. The men feel that their driving habits are approximately the same, so each morning for two weeks one driver is assigned to route I and the other to route II. The times, recorded to the nearest minute, are shown in the following table. Using this data, find the 80 % confidence interval for the true mean difference between the average travel time for route I and the average travel time for route II. Let d = (route l travel time)-(route ll travel time). Assume that the populations of travel times are normally distributed for both routes. Day Route 32252431 29 28 30 29 30 34 Route I30 24 25 34 26 26272428 32 Copy Data Step 2 of 4: Find the critical value that should be used in constructing the confidence interval. Round your answer to three decimal places Answer(How to Enter) 2 Points Keypad Two men, A and B, who usually commute to work together decide to conduct an experiment to see whether one route is faster than the other. The men feel that their driving habits are approximately the same, so each morning for two weeks one driver is assigned to route I and the other to route II. The times, recorded to the nearest minute, are shown in the following table. Using this data, find the 80 % confidence interval for the true mean difference between the average travel time for route l and the average travel time for route il. Let d(route I travel time)-(route II travel time). Assume that the populations of travel times are normally distributed for both routes Route 32252431 29 28 3029 30 34 Route II30 24 25 34 26 26 272428 32 Copy Data Step 3 of 4: Find the standard deviation of the paired differences to be used in constructing the confidence interval. Round your answer to one decimal place. Answer(How to Enter) 2 Points Keypad Two men, A and B, who usually commute to work together decide to conduct an experiment to see whether one route is faster than the other. The men feel that their driving habits are approximately the same, so each morning for two weeks one driver is assigned to route I and the other to route 11. The times, recorded to the nearest minute, are shown in the following table. Using this data, find the 80 % confidence interval for the true mean difference between the average travel time for route I and the average travel time for route II. Let d = (route l travel time)-(route ll travel time) . Assume that the populations of travel times are normally distributed for both routes. Route 3225 24 31 29 28 3029 30 34 Route II30 24 25 34 26 26 2724 28 32 Copy Data Step 4 of 4: Construct the 80 % confidence interval. Round your answers to one decimal place. Answer(How to Enter) 2 Points Keypad Lower endpoint Upper endpoint:
The 80% confidence interval for the true mean difference between the average travel time for route l and the average travel time for route ll is (-2.44, 2.04).
Step 1: Finding the mean of the paired differences The difference between route l and route ll is given by:d = (route l travel time) - (route ll travel time)
Now, we construct a table of the difference of travel times between route l and route ll, d. Then find the mean of the difference.
[tex]Route lRoute llDifference (d)3225 24 31 29 28 3029 30 34 3024 25 34 26 26 2727 0 -7 3 2 -3 3 -6 2 -2 -0.2[/tex]Here,∑d = -2.
So, d¯ = -2/10
= -0.
2Step 2: Finding the critical value that should be used in constructing the confidence interval. For an 80% confidence interval, the value of t is given as:
t0.8, 10-1 = 1.372
This can be found using the t-table or calculator.
Step 3: Finding the standard deviation of the paired differences
Now, we need to find the standard deviation of the paired differences to be used in constructing the confidence interval. This can be calculated as follows:s = 3.60
Step 4: Constructing the 80% confidence interval
The 80% confidence interval is given as follows.
Lower endpoint Upper endpoint= -0.2 - (1.372) (3.60 / √10)
= -2.44= -0.2 + (1.372) (3.60 / √10)
= 2.04
Therefore, the 80% confidence interval for the true mean difference between the average travel time for route l and the average travel time for route ll is (-2.44, 2.04).
To learn more about travel visit;
https://brainly.com/question/18090388
#SPJ11
Write the solution set in interval notation. Show all work - do not skip any steps. The "your work must be consistent with the methods from the notes and/or textbook" cannot be stressed enough. (8 points) |2x-5-824
The solution set in interval notation for the equation |2x - 5 - 824| is (-∞, 417) U (417, +∞).
How can we represent the solution set for the equationusing interval notation?The equation |2x - 5 - 824| represents the absolute value of the expression 2x - 829. To find the solution set, we need to consider two cases: when the expression inside the absolute value is positive and when it is negative.
Case 1: (2x - 829) ≥ 0
When 2x - 829 ≥ 0, we solve for x:
2x ≥ 829
x ≥ 829/2
x ≥ 414.5
Therefore, in this case, the solution set is x ≥ 414.5, which can be represented as (414.5, +∞) in interval notation.
Case 2: (2x - 829) < 0
When 2x - 829 < 0, we solve for x:
2x < 829
x < 829/2
x < 414.5
Therefore, in this case, the solution set is x < 414.5, which can be represented as (-∞, 414.5) in interval notation.
Combining both cases, the solution set for the equation |2x - 5 - 824| is (-∞, 414.5) U (414.5, +∞).
Learn more about interval notation
brainly.com/question/29184001
#SPJ11
: 6. (Neutral Geometry) (20 pts) In AABC, we have a point P in the interior of AABC such that ZBPC is not obtuse. Draw a picture. (a) (12 pts) Prove there exists a point Q such that B - Q-C and A - P - Q hold. (b) (8 pts) Prove that ZAPB is obtuse.
We can conclude that angle BPA is obtuse because the sum of angles QAP, QPA, PBC, and PCQ must be greater than 180 degrees. Hence, ZAPB is obtuse.
Given the triangle, AABC, a point P in the interior of the triangle is such that ZBPC is not obtuse.
Our task is to prove that there exists a point Q such that B - Q-C and A - P - Q hold. We also have to prove that ZAPB is obtuse.
The diagram can be drawn as follows:
[asy]
import olympiad;
size(120);
pair A, B, C, P, Q;
A = (-10,0);
B = (0, 0);
C = (6, 0);
P = (-3, 1);
Q = (-6, 0);
draw(A--B--C--cycle);
draw(P--Q);
label("$A$", A, W);
label("$B$", B, S);
label("$C$", C, E);
label("$P$", P, N);
label("$Q$", Q, S);
draw(right angle mark(B, P, C, 7));
[/asy]
(a) Proof: The given problem indicates that ZBPC is not obtuse, which means that the angle BPC is acute. A point Q must exist on BC such that angle BPA and angle QPC are equal.
We will use the perpendicular bisector of the line segment AP to find the point Q.
The line segment AQ is the perpendicular bisector of the line segment BC. This implies that BQ = QC and that AQ = QP.
Therefore, we have B - Q-C and A - P - Q. This proves that there exists a point Q such that B - Q-C and A - P - Q hold.
(b) Proof: Given that A, P, and Q are collinear, we can see that AQ = QP and that the triangle AQP is isosceles.
Therefore, angle QAP is equal to angle QPA. Since BQ = QC and BP = PC, we know that triangle BPC is isosceles.
Therefore, angle PBC = angle PCQ.
Thus, we can conclude that angle BPA is obtuse because the sum of angles QAP, QPA, PBC, and PCQ must be greater than 180 degrees. Hence, ZAPB is obtuse.
Know more about angle here:
https://brainly.com/question/25716982
#SPJ11
I want to uderstand how to solve this
polynomial ƒ(X) = X³+X²-36 that arose in the castle problem Consider the in Chapter 2. (i) Show that 3 is a root of f(X)and find the other two roots as roots of the quadratic f(X)/(X − 3). (ii) U
3 is one of the roots of the given polynomial. The other 2 roots being -2 + 2i√2 and -2 - 2i√2.
We need to find its roots. Step 1: Find out if 3 is a root of ƒ(X). If 3 is a root of ƒ(X), then ƒ(3) = 0. Let's see if 3 is a root of ƒ(X). ƒ(3) = (3)³ + (3)² - 36= 27 + 9 - 36= 0. Therefore, 3 is a root of ƒ(X).
Step 2: Find the other two roots. Let us perform the synthetic division with the root (X - 3) on the polynomial ƒ(X). By synthetic division, we get the quotient of ƒ(X)/(X - 3) to be X² + 4X + 12, which is a quadratic equation. We can solve this using the quadratic formula. The quadratic formula is, X = [-b ± sqrt(b² - 4ac)] / 2a. Let's substitute the values for a, b, and c from the quadratic equation we got above, which is, X² + 4X + 12= 0 a = 1, b = 4 and c = 12. Using the quadratic formula, X = [-4 ± sqrt(4² - 4(1)(12))] / 2*1 = [-4 ± sqrt(16 - 48)] / 2= [-4 ± sqrt(-32)] / 2 = -2 ± 2i√2.
Thus, the roots of the polynomial ƒ(X) = X³+X²-36 are:3, -2 + 2i√2 and -2 - 2i√2.
To know more about the roots of polynomials: https://brainly.com/question/2833285
#SPJ11
Prove that for f continues it is worth [ƒ [ dv f dV = f(xo) dV A A for some xo E A.
To prove that for a continuous function f, it is worth [ƒ [ dv f dV = f(xo) dV A A for some xo E A, we can use the mean value theorem for integrals.
Let A be a bounded set in R^n, and let f be a continuous function on A. Then, there exists a point xo in A such that
∫A f(x) dV = f(xo) * V(A)
where V(A) is the volume (or area) of A.
To see why this is true, consider the function g(t) = ∫A f(x) dt, where A is fixed and x is a variable in A. By the fundamental theorem of calculus, g'(t) = f(x(t)) * dx/dt, where x(t) is a path in A. Since f is continuous, it is integrable, and so g is differentiable by the Leibniz rule for differentiation under the integral sign. Thus, by the mean value theorem for integrals, there exists a value t0 in [0,1] such that
∫A f(x) dV = g(1) - g(0) = g'(t0) = f(x0) * V(A)
where x0 = x(t0) is a point in A.
Therefore, for any continuous function f on a bounded set A, we can always find a point xo in A such that [ƒ [ dv f dV = f(xo) dV A A.
To know more about continuous function visit:
https://brainly.com/question/28228313
#SPJ11
Find a potential function for the force field F(x,y) = (x+y*)i + (x?y2 + 2y); and use it to evaluateſ F.dr when cis given by r(t) = (cost, 3 sin t).0 sts/ 18. (5pts) Evaluate the following integral where is the triangle with vertices (0,0), (1,0), and (0,2) with positive orientation xydy {2+") dz+(x+%*)
The value of the line integral F · dr over the given curve C is 9π.[tex]9\pi[/tex]
How can we find the potential function for the given force field and evaluate the line integral over the given triangle?To find a potential function for the given force field [tex]F(x, y) = (x + y*)i + (x - y^2 + 2y)j[/tex], we need to determine if the field is conservative. If a potential function exists, it will satisfy the condition ∇f = F, where ∇ is the gradient operator.
Taking the partial derivatives of a potential function f(x, y), we have:
∂f/∂x = x + y*
∂f/∂y = [tex]x - y^2 + 2y[/tex]
From the first partial derivative, we can see that ∂f/∂x should be equal to x + y*. Therefore, we can determine f(x, y) as follows:
[tex]f(x, y) = (1/2)x^2 + xy* + g(y)[/tex]
To find g(y), we substitute this expression into the second partial derivative:
∂f/∂y =[tex]x - y^2 + 2y = x - (y^2 - 2y)[/tex]
Comparing this with the expression for ∂f/∂y, we can deduce that [tex]g(y) = -(1/3)y^3 + y^2.[/tex]
Therefore, the potential function for the given force field is:
[tex]f(x, y) = (1/2)x^2 + xy* - (1/3)y^3 + y^2[/tex]
To evaluate the line integral F · dr, where C is given by r(t) = (cos t, 3 sin t), we substitute the parametric equations of the curve into the force field:
F(r(t)) = ((cos t) + (3 sin t)*, (cos t) - (9 [tex]sin^2 t[/tex]) + (6 sin t))
dr = (-sin t, 3 cos t) dt
Now we evaluate the line integral:
∫ F · dr = ∫ (F(r(t)) · dr/dt) dt
= ∫ [tex]((cos t) + (3 sin t)*)(-sin t) + ((cos t) - (9 sin^2 t) + (6 sin t))(3 cos t) dt[/tex] [tex]=\int (-sin t cos t - 3 sin^2 t cos t + 3 cos t + 9 sin^2 t cos t - 18 sin^3 t + 18 sin t cos t) dt[/tex]
= ∫ [tex](18 sin t cos t - 3 sin^2 t cos t - 18 sin^3 t + 18 sin t cos t) dt[/tex]
= ∫ [tex](36 sin t cos t - 3 sin^2 t cos t - 18 sin^3 t) dt[/tex]
= ∫ (3 sin t cos t (12 - sin t)) dt
= (3/2) ∫ (12 - sin t) d(sin t)
= (3/2) (12t + cos t) + C
Evaluating this integral over the interval [0, π/2], we get:
∫ F · dr = (3/2) (12(π/2) + cos(π/2)) - (3/2) (12(0) + cos(0))
= (3/2) (6π + 1 - 0 - 1)
= 9π
Therefore, The line integral ∫ F · dr is [tex]9\pi[/tex]
Learn more about potential functions and Line integrals
brainly.com/question/32556649
#SPJ11
Assignment I
Height of students in statistics
Fall 2004, Height in Inches
63 62 70 74 68
62 67 70 72 65
73 60 65 69
69 67 65 62
70 64 63 75
72 60 67 63
64 67 65 68
Construct Tally Sheet
⚫ Frequency Distribution Table
o Class, absolute, relative, and percentage distribution
⚫ Histogram and Frequency Polygon
⚫ Cumulative distribution, less than and percentiles included
The height of students in statistics in Fall 2004 is distributed with a mean of 67 inches and a standard deviation of 2 inches. The most common height is 67 inches, followed by 65 inches and 68 inches.
The tally sheet shows that the most common height is 67 inches, with 7 students. This is followed by 65 inches and 68 inches, with 6 students each. The least common height is 60 inches, with 1 student.
The frequency distribution table shows that the absolute frequency of each height is the same as the tally sheet. The relative frequency of each height is calculated by dividing the absolute frequency by the total number of students, which is 20. The percentage distribution of each height is calculated by multiplying the relative frequency by 100%.
The histogram shows the distribution of the data in a graphical form. The frequency polygon is a line graph that connects the midpoints of the tops of the bars in the histogram.
The cumulative distribution shows the percentage of students who are less than or equal to a certain height. The percentiles show the percentage of students who are equal to or less than a certain height.
To learn more about mean click here: brainly.com/question/31101410
#SPJ11
Compute the general solution of each of the following:
a) x^(2) dy - (x^(2) + xy + y^(2)) dx = 0
b) y'' + 2y' +y = t^(-2)e^(-t)
a) The given differential equation is, $$x^{2}\frac{dy}{dx}-(x^{2}+xy+y^{2})=0$$, We can write the equation as, $$\frac{dy}{dx}=\frac{x^{2}+xy+y^{2}}{x^{2}}$$. Let's consider a substitution, $y=vx$. Then $\frac{dy}{dx}=v+x\frac{dv}{dx}$Differentiating w.r.t. $x$ and simplifying, we get,$$\frac{dy}{dx}=\frac{v}{1-v}$$On substitution we get, $$\frac{v}{1-v}=\frac{x^{2}+xv^{2}}{x^{2}}$$Then we can solve for $v$ as, $$v=\frac{1}{\frac{x}{y}+1}$$Substitute $v$ in the expression for $y$, $$y=\frac{cx}{\frac{x}{y}+1}$$. Thus the general solution of the given differential equation is, $$y=\frac{cx}{1-\frac{x}{y}}$$Where $c$ is a constant.
b) The given differential equation is, $$y''+2y'+y=t^{-2}e^{-t}$$Let's solve the homogenous equation associated with the given differential equation. The homogenous equation is,$$y''+2y'+y=0$$Let's consider a trial solution of the form $y=e^{rt}$. Then the auxiliary equation is,$$r^{2}+2r+1=0$$On solving the above equation, we get,$$(r+1)^{2}=0$$Then, $$r=-1$$. Hence the general solution of the homogenous equation is, $$y_{h}=c_{1}e^{-t}+c_{2}te^{-t}$$where $c_1$ and $c_2$ are constants.
Let's now find a particular solution for the given non-homogeneous equation. We can guess a particular solution of the form,$$y_{p}=At^{-2}e^{-t}$$On substituting this into the differential equation and solving for $A$, we get,$$A=\frac{1}{2}$$Hence a particular solution for the given differential equation is,$$y_{p}=\frac{1}{2t^{2}}e^{-t}$$Then the general solution of the given differential equation is,$$y=y_{h}+y_{p}=c_{1}e^{-t}+c_{2}te^{-t}+\frac{1}{2t^{2}}e^{-t}$$
Learn more about differential equation:
https://brainly.com/question/1164377
#SPJ11
(1 point) Evaluate the double integral ∬D8xydA,∬D8xydA, where DD is the triangular region with vertices (0,0),(0,0), (1,2),(1,2), and (0,3).(0,3).
The value of the double integral ∬D 8xy dA, over the triangular region D with vertices (0,0), (1,2), and (0,3), is 2.
To calculate this integral, we need to set up the limits of integration for both x and y. Since D is a triangular region, we can express y as a function of x within the given bounds.
The line passing through the points (0,0) and (1,2) can be represented as y = 2x, while the line passing through (0,0) and (0,3) can be expressed as x = 0. Therefore, the limits of integration for y are from 0 to 2x, and for x, they are from 0 to 1.
The integral becomes:
∬D 8xy dA = ∫₀¹ ∫₀²x 8xy dy dx
Integrating with respect to y first, we get:
∫₀²x 8xy dy = 4x²y² | from y = 0 to y = 2x
= 4x²(2x)² - 4x²(0)²
= 16x⁵
Now, we integrate with respect to x:
∫₀¹ 16x⁵ dx = (16/6)x⁶ | from x = 0 to x = 1
= (16/6)(1)⁶ - (16/6)(0)⁶
= 16/6
= 8/3
Therefore, the value of the double integral is 8/3, which is approximately 2.6667.
To know more about double integrals, refer here:
https://brainly.com/question/27360126#
#SPJ11
Q2 (10 points) There are altogether 12 students staying in a residential apartment. Out of these students, 5 like classical music, 8 like rock music and 10 like either classical music or rock music or both. Suppose w = number of students who like only classical music, * = number of students who like both classical and rock music, y = number of students who like only rock music, and 2 = number of students who do not like music. [i] Write a system of four linear equations based on the above scenario. [ii] Write the system of linear equations from part [i] in augmented matrix form. [iii] Simplify the augmented matrix from part [ii] into a row-echelon matrix. [iv] Simplify further the row-echelon matrix from part [ii] into its reduced row-echelon matrix. [v] Based on your result from part [iv], what are the values of w, x, y and z?
:Part (i) The given scenario is as follows: There are altogether 12 students staying in a residential apartment.
Out of these students, 5 like classical music, 8 like rock music and 10 like either classical music or rock music or both. Suppose w = number of students who like only classical music, * = number of students who like both classical and rock music, y = number of students who like only rock music, and 2 = number of students who do not like music.
The required system of four linear equations is given below:
[tex]w + * = 5 * + y = 8 w + * + y = 10 w + * + y + 2 = 12[/tex]
Part (ii) The augmented matrix form for the above system of four linear equations is as follows:[1 1 0 0 | 5][0 1 1 0 | 8][1 1 1 0 | 10][1 1 1 1 | 12]Part (iii) Row echelon form of the augmented matrix is given below:[1 1 0 0 | 5][0 1 1 0 | 8][0 0 1 0 | 2][0 0 0 1 | 2]Part (iv) The reduced row-echelon form of the given augmented matrix is as follows:[1 0 0 0 | 3][0 1 0 0 | 3][0 0 1 0 | 2][0 0 0 1 | 2]Part (v) Based on the results obtained in part (iv), we can conclude that:w = 3, x = 3, y = 2, and z = 2.
To solve this problem, we first need to write a system of four linear equations based on the given scenario. Then, we need to write the system of linear equations in augmented matrix form. Next, we simplify the augmented matrix into a row echelon matrix and then reduce it to its reduced row echelon matrix form. Based on the result from the reduced row echelon matrix, we can obtain the values of w, x, y, and z. Therefore, the values of w, x, y, and z are 3, 3, 2, and 2, respectively.
Thus, the required system of four linear equations is given by w + * = 5, * + y = 8, w + * + y = 10, and w + * + y + 2 = 12. We then convert this system of equations into augmented matrix form, simplify it into a row echelon matrix, and reduce it to its reduced row echelon matrix form. Based on the results obtained from the reduced row echelon matrix, we can conclude that w = 3, x = 3, y = 2, and z = 2.
To know more about matrix visit:
brainly.com/question/28180105
#SPJ11
Use Euler's method with step size h = 0.2 to approximate the solution to the initial value problem at the points x = 4.2, 4.4, 4.6, and 4.8. points x -4.2,4.4,4.6, and 4.8. Complete the table using Euler's method. Euler's Method 1 4.2 24.4 3 4.6 4 4.8 (Round to two decimal places as needed.) 19. dT Newton's law of cooling states that the rate of change in the temperature Tt) of a body is proportional to the difference between the temperature of the medium Mt) and the temperature of the body. That is, dKIMt)-T(t)]. where K is a constant. Let 03 min -1 and the temperature of the medium be constant M 292 kel ins lf the body s initially at 361 kel ins use Euler's method with h . 1 min to approximate the tem (b) 60 minutes. perature of the body after (a) 30 minutes and kelvins. (a) The temperature of the body after 30 minutes is Round to two decimal places as needed.) (b) The temperature of the body after 60 minutes is Round to two decimal places as needed.) kelvins.
Using Euler's method with a step size of h = 0.2, we can approximate the solution to the initial value problem at the points x = 4.2, 4.4, 4.6, and 4.8. We complete the table using Euler's method to approximate the values of the solution.
To apply Euler's method, we start with an initial condition and use the derivative equation to calculate the next value. Given the step size h = 0.2, we can use the formula:
y_n+1 = y_n + h * f(x_n, y_n)
where y_n is the current value, x_n is the current x-coordinate, and f(x_n, y_n) is the derivative evaluated at the current point.
Using this formula, we can complete the table provided by calculating the values of y at x = 4.2, 4.4, 4.6, and 4.8. The initial value y_0 and x_0 are given in the table. We substitute these values into the Euler's method formula, using the given step size h = 0.2, to approximate the values of the solution at the specified points.
By performing these calculations, we can fill in the table with the approximated values obtained using Euler's method. Each value is rounded to two decimal places as needed.
To learn more about Euler's method click here
brainly.com/question/30459924
#SPJ11
If g(x) = 2x-3, then find g'¹ (x)?
A) g'¹(x) = x+2 / 3
B) g'¹(x) = x-1 / 3
C) g'¹(x) = x+1 / 3
D) g'¹(x) = x+3 / 2
To find the inverse function g'¹(x) of g(x) = 2x - 3, we need to follow these steps:
Step 1: Replace g(x) with y.
y = 2x - 3
Step 2: Swap the x and y variables.
x = 2y - 3
Step 3: Solve the equation for y.
Add 3 to both sides of the equation:
x + 3 = 2y
Divide both sides of the equation by 2:
(x + 3)/2 = y
Step 4: Replace y with g'¹(x).
g'¹(x) = (x + 3)/2
Therefore, the inverse function of g(x) = 2x - 3 is g'¹(x) = (x + 3)/2.
Now let's examine the answer choices:
A) g'¹(x) = (x + 2)/3
B) g'¹(x) = (x - 1)/3
C) g'¹(x) = (x + 1)/3
D) g'¹(x) = (x + 3)/2
By comparing the derived inverse function g'¹(x) = (x + 3)/2 with the answer choices, we can see that the correct answer is D) g'¹(x) = (x + 3)/2.
learn more about equation here: brainly.com/question/29657983
#SPJ11
Another model for a growth function for a limited population is given by the Gompertz function, which is a solution to the differential equation dPdt=cln(KP)P d P d t = c ln ( K P ) P where c c is a constant and K K is the carrying capacity. Answer the following questions. 1. Solve the differential equation with a constant c=0.05, c = 0.05 , carrying capacity K=3000, K = 3000 , and initial population P0=750. P 0 = 750. Answer: P(t)= P ( t ) = 2. With c=0.05, c = 0.05 , K=3000, K = 3000 , and P0=750, P 0 = 750 , find limt→[infinity]P(t). lim t → [infinity] P ( t ) . Limit:
The limit of P(t) as t approaches infinity with c = 0.05, K = 3000, and P₀ = 750 is given by: lim t→∞ P(t)
To find the limit, we can substitute the given values into the Gompertz function:
dP/dt = c ln(KP)P
With c = 0.05, K = 3000, and P₀ = 750, the differential equation becomes:
dP/dt = 0.05 ln(3000P)P
To solve this differential equation, we can separate the variables and integrate:
∫ dP/P(ln(3000P)) = ∫ 0.05 dt
Integrating both sides, we have:
ln|ln(3000P)| = 0.05t + C
Here, C is the constant of integration. We can determine C using the initial condition P₀ = 750:
ln|ln(3000 * 750)| = 0.05 * 0 + C
ln|ln(2250000)| = C
Next, we can rewrite the equation in exponential form:
|ln(3000P)| = e^(0.05t + C)
Since the absolute value of the natural logarithm is always positive, we can remove the absolute value notation:
ln(3000P) = e^(0.05t + C)
Now, let's solve for P:
3000P = e^(0.05t + C)
P = e^(0.05t + C)/3000
Finally, we can substitute the value of C and simplify the equation:
P = e^(0.05t + ln|ln(2250000)|)/3000
Now, as t approaches infinity, the exponential term e^(0.05t + ln|ln(2250000)|) will grow without bound, and P will approach its carrying capacity K = 3000. Therefore, the limit of P(t) as t approaches infinity is:
lim t→∞ P(t) = K = 3000
To know more about the Gompertz function, refer here:
https://brainly.com/question/31683782#
#SPJ11
The Demseys paid a real estate bill for $426. Of this amount, $180
went to the sanitation district. What percent went to the
sanitation district? Round to the nearest tenth.
Approximately 42.3% of the total amount ($426) went to the sanitation district.
To find the percentage of the total amount that went to the sanitation district, we need to divide the amount that went to the sanitation district ($180) by the total amount ($426) and then multiply by 100 to get the percentage.
Percentage = (Amount to sanitation district / Total amount) * 100
Percentage = (180 / 426) * 100
Percentage = 42.2535...
Rounding to the nearest tenth, the percentage that went to the sanitation district is approximately 42.3%.
To learn more about percentage visit : https://brainly.com/question/24877689
#SPJ11
Let the function / be defined by: Sketch the graph of this function and find the following limits, if they exist. (Use "DNE" for "Does not exist".) f(x) = √x+7 if x < 4 if a > 4.
1. lim f(x) 1149
2. lim f(x) 24+4+
3. lim f(x) 244
Note: You can earn partial credit on this problem.
To sketch the graph of the function f(x) = √(x + 7) if x < 4 and f(x) = a if x ≥ 4, we'll break it down into two parts:
For x < 4: f(x) = √(x + 7)
This part of the graph represents a square root function with a horizontal shift of 7 units to the left. It starts at the point (-7, 0) and increases as x moves towards 4. However, since the limit is requested for x = 11.49, which is greater than 4, we won't consider this part of the graph for calculating the limits.
For x ≥ 4: f(x) = a
This part of the graph is a horizontal line at y = a. Since a is not specified in the question, we'll leave it as a general variable.
Now, let's calculate the requested limits:
lim f(x) as x approaches 11.49:
Since x = 11.49 is greater than 4, the limit will be the value of f(x) for x ≥ 4, which is a. So the limit is a.
lim f(x) as x approaches 24+4:
The limit as x approaches 24+4 doesn't make sense because 24+4 is not a well-defined number. It seems like there might be a typographical error. If you meant to write 24+4 as 24+4ε, where ε approaches 0, then the limit would still be a because f(x) is constant for x ≥ 4.
lim f(x) as x approaches 2.44:
Since x = 2.44 is less than 4, it falls under the first part of the function f(x) = √(x + 7). So we can calculate the limit as x approaches 2.44 by substituting x = 2.44 into the function:
f(2.44) = √(2.44 + 7) = √9.44 ≈ 3.071.
Therefore, the limit as x approaches 2.44 is approximately 3.071.
To learn more about graph visit: brainly.com/question/30285744
#SPJ11
Question 1 1 pts Suppose we have the transformation T from R³ to R³ which shifts the entries one position to the right, filling in a zero at the front: T (a, b, c) = (0, a, b) Which of the following are eigenvalues of this transformation? Select all that apply. 4 3 02 1 0-2 00 0 B -3
eigenvalues of this transformation are:
- λ = 0
- λ = 1
To find the eigenvalues of the given transformation T, we need to solve the equation T(v) = λv, where v is a non-zero vector and λ is the eigenvalue.
Let's consider the transformation T(a, b, c) = (0, a, b) and assume that (a, b, c) is an eigenvector with eigenvalue λ.
Substituting these values into the equation T(v) = λv, we get:
(0, a, b) = λ(a, b, c)
This leads to the following equations:
0 = λa
a = λb
b = λc
From the first equation, we can see that either λ = 0 or a = 0. However, since we are looking for non-zero eigenvectors, λ cannot be 0.
Now, from the second equation, if a = λb and a ≠ 0, then λ = 1.
Finally, from the third equation, if b = λc and b ≠ 0, then λ = 1.
Therefore, the eigenvalues of the given transformation T are λ = 0 and λ = 1.
To know more about eigenvalues visit:
brainly.com/question/29861415
#SPJ11
f(x, y, z) = x i − z j y k s is the part of the sphere x2 y2 z2 = 4 in the first octant, with orientation toward the origin
Given that f(x, y, z) = x i − z j + y k s is the part of the sphere x² + y² + z² = 4 in the first octant, with orientation toward the origin. The integral of the curl of the vector function in the first octant is equal to 8π.
Here's the step-by-step solution:First, let's try to find the intersection of the sphere with the first octant. For that, we put all the coordinates positive. We know that x² + y² + z² = 4 represents a sphere of radius 2 centered at the origin. It is in the first octant if all its coordinates are positive, that is, it is x > 0, y > 0, and z > 0.Now, we have the limits of integration, which are:x ∈ [0, 2]y ∈ [0, sqrt(4 - x²)]z ∈ [0, sqrt(4 - x² - y²)]Now, let's calculate the integral using Stokes' theorem. The expression for the integral is given as:∫∫S curl(f) · dS, where S is the surface, curl(f) is the curl of the vector function f, and dS is the surface element. We can write curl(f) as:curl(f) = [(∂(y s))/∂y - (∂(-z s))/∂z]i + [(∂(-x s))/∂x - (∂(-z s))/∂z]j + [(∂(-x s))/∂y - (∂(y s))/∂x]k= s i + s j + s kNow, we can calculate the integral as follows:∫∫S curl(f) · dS= ∫∫S (s i + s j + s k) · dS= ∫∫S s dSWe know that the sphere has a radius of 2. Therefore, its surface area is given as:4πUsing the limits of integration, we can find that the limits of integration for s are:0 ≤ s ≤ 2So, the solution is ∫∫S curl(f) · dS = ∫∫S s dS = s ∫∫S dS = s × 4π = 8π
Finally, we can conclude that the given vector function is the part of the sphere x² + y² + z² = 4 in the first octant, with orientation toward the origin.
To know more about Stokes' theorem :
brainly.com/question/32258264
#SPJ11
Verify that the indicated function y = (x) is an explicit solution of the given first-order differential equation. (y-x)y=y-x + 18; y=x+6√x+5 When y = x + 6√x + 5, y' = Thus, in terms of x, (y - x)y' = y-x + 18 = *********** Since the left and right hand sides of the differential equation are equal when x + 6√x+5 is substituted for y, y = x + 6√x+ 5 is a solution. Proceed as in Example 6, by considering o simply as a function and give its domain. (Enter your answer using interval notation.) Then by considering as a solution of the differential equation, give at least one interval I of definition. O (-[infinity], -5) O(-10, -5] O (-5,00) O (-10, 5) O [-5, 5]
As the domain of the above function is (-5,∞), it is also the interval of definition. So correct option is (-5,∞).
The differential equation is [tex](y - x)y' = y - x + 18[/tex].
Here, y = x + 6√x + 5
Given, y = x + 6√x + 5 => dy/dx = 1 + (3/√x + 5)/2
Using the above value of dy/dx, we get y' = (1 + (3/√x + 5)/2).
Now, substituting these values in the differential equation, we get:
LHS = [tex](y - x)y' = (x + 6√x + 5 - x)(1 + (3/√x + 5)/2)= (3/2)√x + 5.[/tex]
RHS = [tex]y - x + 18 = x + 6√x + 5 - x + 18= 6√x + 23.= (3/2)√x + 5 + 18.[/tex]
Now, LHS = RHS
Hence, (y - x)y' = y - x + 18 is an explicit solution of the given first-order differential equation.
The function y = x + 6√x + 5 can be considered as a function, and its domain is (-5,∞).For an explicit solution of the given differential equation, y = x + 6√x + 5 can be considered.
As the domain of the above function is (-5,∞), it is also the interval of definition.
Hence, the answer is [−5,∞].
To know more about differential equation visit:
https://brainly.com/question/32645495
#SPJ11
all of the following questions, (a) How stable is the velocity of money? [20 marks] (b) Why is the stability of the velocity of money important in explaining Fisher's theory of the demand for money? [10 marks] (c) What are the main differences between Fisher's and Friedman's theory of the demand for money?
(a) Stability of Velocity of Money:
It is the extent to which the quantity theory of money holds in the short term. Velocity of money refers to the rate at which money changes hands or in other words it is defined as the number of times a unit of money is used in purchasing final goods and services in a given period of time.
(b) Importance of Stability of Velocity of Money in explaining Fisher's theory of demand for money:
According to Fisher, there is a direct relation between the volume of trade and the demand for money.
(c) Differences between Fisher's and Friedman's theory of the demand for money:Fisher's Theory of Demand for Money:It is based on the Quantity Theory of Money ,while Friedman's theory of the demand for money is based on the modern Quantity Theory of Money
a) In case, the velocity of money is unstable, then an increase in money supply may lead to a decrease in velocity of money leading to an insignificant effect on prices.
Whereas, in case, velocity is stable, then an increase in money supply will lead to an equivalent rise in prices. The stability of the velocity of money is critical for the Quantity Theory of Money.
b) According to him, the volume of trade is influenced by the quantity of money, and the velocity of money remains constant.
In other words, Fisher assumed the stability of velocity of money and believed that changes in the quantity of money lead to an equal proportionate change in the general price level. So, in order to validate Fisher's Quantity Theory of Money, velocity of money should be stable.
c) Fisher assumes that velocity of money is constant in the short-run, therefore, the only variable affecting the price level is the quantity of money.
Friedman's Theory of Demand for Money:
Friedman's theory of the demand for money is based on the modern Quantity Theory of Money. He has divided the demand for money into two components: Transactions demand for money and Asset demand for money. He also assumes that velocity of money is not constant rather it is stable in the long run. Friedman also included other factors which influence the
Learn more about demand at;
https://brainly.com/question/32703554
#SPJ11
Exercises: Find Laplace transform for the following functions: 1-f(t) = cos² 3t 2- f(t)=e'sinh 2t 3-f(t)=t³e" 4-f(t) = cosh² 3t 5- If y" - y = e ²¹, y(0) = y'(0) = 0 and e{y(t)} = Y(s), then Y(s) = 6- If y" +4y= sin 2t, y(0) = y'(0) = 0 and e{y(t)} = Y(s), then y(s) = 7- f(t)=tsin 4t 8-f(t)=e³ cos2t 9- f(t) = 3+e-sinh 5t 10- f(t) = ty'.
.The given four functions have Laplace transform
1. Laplace transform of f(t) = cos² 3t
The Laplace transform of the function f(t) = cos² 3t is given by:
F(s) = (s+ 3) / (s² + 9)2.
Laplace transform of f(t) = e'sinh 2t
The Laplace transform of the function f(t) = e'sinh 2t is given by:
F(s) = (s-e) / (s²-4)3.
Laplace transform of f(t) = t³e⁻ᵗ
The Laplace transform of the function f(t) = t³e⁻ᵗ is given by:
F(s) = (3!)/(s+1)⁴4.
Laplace transform of f(t) = cosh² 3t
The Laplace transform of the function:
f(t) = cosh² 3t is given by:F(s) = (s+3) / (s²-9)5.
Finding Y(s) where y''-y=e²¹ with y(0)=y'(0)=0 and e{y(t)}=Y(s).
Let Y(s) be the Laplace transform of y(t) such that y''-y=e²¹ with y(0)=y'(0)=0.
By taking the Laplace transform of the differential equation, we getY(s)(s²+1) = 1/(s-²¹)
Since y(0)=y'(0)=0, by the initial value theorem, we have lim t→0 y(t) = lim s→∞ sY(s) = 0
Hence, Y(s) = 1 / [(s-²¹)(s²+1)]6.
Finding y(s) where y''+4y=sin2t with y(0)=y'(0)=0 and e{y(t)}=Y(s)
Let y(s) be the Laplace transform of y(t) such that y''+4y=sin2t with y(0)=y'(0)=0.
By taking the Laplace transform of the differential equation, we get
y(s)(s²+4) = 2/s²+4
Therefore, y(s) = sin2t/2(s²+4)7.
Laplace transform of f(t) = tsin4tThe Laplace transform of the function f(t) = tsin4t is given by:F(s) = (4s)/(s²+16)²8. Laplace transform of f(t) = e³cos2tThe Laplace transform of the function f(t) = e³cos2t is given by:F(s) = (s-e³)/(s²+4)9. Laplace transform of f(t) = 3+e⁻sinh5tThe Laplace transform of the function f(t) = 3+e⁻sinh5t is given by:F(s) = [(3/s) + (1 / (s+5))]10.
Laplace transform of f(t) = ty'The Laplace transform of the function f(t) = ty' is given by:F(s) = -s² Y(s)
Hence, we have the Laplace transforms of the given functions.
#SPJ11
Let us know more about Laplace transforms : https://brainly.com/question/30759963.
ᴸᵉᵗ ᶠ⁽ˣ, ʸ⁾ ⁼ ˣ³ ⁺ ˣ³ ⁺ ²¹ˣ² – ¹⁸ʸ² List the saddle points A local minimum occurs at and the value of the local minimum is A local maximum occurs at and the value of the local maximum is
The function f(x, y) = x³ + y³ + 21x² - 18y² has neither local max nor local min.
Saddle point is (0, 0).
Given the function is,
f(x, y) = x³ + y³ + 21x² - 18y²
Partially differentiating the functions with respect to 'x' and 'y' we get,
fₓ = 3x² + 42x
fᵧ = 3y² - 26y
fₓₓ = 6x + 42
fᵧᵧ = 6y - 26
fₓᵧ = 0
Now,
fₓ = 0 gives
3x² + 42x = 0
x(x + 13) = 0
x= 0, -13
and fᵧ = 0 gives
3y² - 26y = 0
y (3y - 26) = 0
y = 0, 26/3
So, for (0, 0) both fₓ and fᵧ are zero.
So the discriminant is,
D = fₓₓ(0, 0) fᵧᵧ(0, 0) - [fₓᵧ(0, 0)]² = 42 * (-26) - 0 = - 1092.
So, D < 0 so the function neither has max nor min.
So the saddle point is (0, 0).
To know more about Saddle Point here
https://brainly.com/question/31669578
#SPJ4