Answer:
c
Explanation:
1. a Use the valence electron molecular orbital diagram for F2 to propose ground state F2ions that satisfy the following conditions
(1.5 points) (i) A F2 ion that is paramagnetic and that has a non-integer bond order.
(1.5 points) (ii) A F2 ion that is paramagnetic and that has an integer bond order.
(1.5 points) (iii) A F2 ion that is diamagnetic and that has a bond order of 3.
Clearly show the charge on your ion, label all valence molecular orbitals, and show the corresponding electrons in their orbitals. Full calculations for bond orders must be included.
b) Using only the valence electron molecular orbital diagram for F2, is a ground state diamagnetic ion with a bond order of 2 possible? Write one or two sentences to explain why or why not.
What is the interaction between atmosphere and biosphere
Answer:
Biosphere-Atmosphere Interactions focuses on the sources and sinks of greenhouse gases (GHGs), air pollutants, particulate matter, water, and energy between the Earth's surface and the atmosphere.
Explanation:
How can a redox reaction be identified?
O A. Atoms have rearranged.
O B. Protons have been transferred.
.
O
C. lons are present in solution.
D. Oxidation states have changed.
Answer:
'Oxidation states have changed.'
Explanation:
Redox Reactions can be identifiable by a change in oxidation number/states of two of the atoms in the reaction. Any reaction in which no oxidation numbers/state change is not a redox reaction.
d. The animals such as snakes and tortoises are called reptilians. Why?
Answer:
Explanation : Reptiles are cold blooded animals, have scales on their body (instead of hair or fur) and are usually egg laying. (certain viper types and boas give birth to live young). So that is what makes animals reptiles.
Reptiles are cold-blooded creatures that often lay eggs and have scales on their bodies rather than hair or fur. (Some types of vipers and boas give birth to live young).
Due to these reasons animals are reptiles.
What are reptiles?
Air-breathing vertebrates known as reptiles have unique skin consisting of scales, bony plates, or a combination of the two.They comprise of tortoises, turtles, lizards, snakes, and crocodiles.All of them periodically shed their skin's outer covering. The temperature of their environment affects how they function.Reptiles do not maintain a steady internal body temperature, in contrast to birds and mammals. They cannot stay warm on a chilly day without fur or feathers, and they cannot cool themselves on a hot day without sweat glands or the ability to pant. Instead, they shift as needed between the sun and the shade. They stop moving around when the weather becomes colder. Reptiles are cold-blooded due to their slow metabolic rate and heat-seeking habit.
Thus, it can be concluded that animals such as snakes and tortoises are called reptilians.
To know more about reptiles, refer to the below link:
https://brainly.com/question/2284471
#SPJ2
What is the momentum of a car if its mass 200kg and moving with a speed of 3m/s?
600 kg·m/s
Given:Mass = 200 kg
Velocity = 3 m/s
Power = Mass * Velocity = 200 kg * 3 m/s = 600 kg·m/s
1. Newton's First Law is also called the
Law of
Answer: law of inertia
Explanation:
Answer:
The Law of Inertia
Explanation:
Another name for Newton's first law is The Law of Intertia, which states that "if a body is at rest or moving at a constant speed in a straight line, it will remain at rest or keep moving in a straight line at constant speed unless it is acted upon by a force" (“Newton’s laws of motion | Definition, Examples, & History | Britannica, n.d.).
What is the atomic number of an oxygen atom that has 8 protons in its nucleus? 4 6 8 12
Answer:
8
Explanation:
f an oxygen atom has 8 protons and 8 neutrons in the nucleus, what is the atomic number? 8
what takes place when the pollen of the one plants move and fertilize the ovum of another plant
The metal which burns with a white dazzling flame is:
a) silver
b) magnesium
c) gold
d) aluminum
Answer:
MagnesiumMagnesium burns with a dazzling white flame to form magnesium oxide a powdery mass.
Explanation:
Hope this helps you !!Answer:
b) Magnesium
Explanation:
According to G double O gle, it doesn't react with cold water but reacts to hot water/steam to form magnesium. Hydroxide and Hydrogen gas is released into the air!
Please choose and answer 3 of the following 4 questions:
1. Rutherford and JJ Thompson both contributed to what we know about the structure of the atom. What experiments did they perform and how did it change what we know about the structure of the
atom? Furthermore, describe the structure of an atom using only words (no diagrams).
2. Electrons exist outside the nucleus on many different energy levels. When electrons lose energy, they emit waves that are found on the electromagnetic spectrum. What equation would you use to
find the wavelength or frequency of a wave, assuming you know the other value? What is the relationship between frequency and wavelength? What is the relationship between frequency and
energy?
3. Even though electrons move around constantly, scientists use electron configurations to give an "address" to a particular electron. What are the 4 shells that scientists use? How many electrons can
fit into each shell? How can you use the knowledge about these shells and the periodic table to determine the electron configuration of an element?
4. Suppose you know there is an element with an atomic number of 26 and a mass of 60. What do you know about this element? How many subatomic particles does it have? How can you tell?
Answer:
1. Rutherford performs the gold foil experiment while JJ Thompson performs cathode ray experiment. It was Rutherford's experiment that used positively charged alpha particles (He with a +2 charge) that were deflected by the dense inner mass of the nucleus (nucleus). The conclusion that could be drawn from this finding was that atoms were composed of an inner core that comprised the majority of the atom's mass and was positively charged in nature. The work of JJ Thompson using cathode ray tubes demonstrated that all atoms contain small negatively charged subatomic particles, also known as electrons. According to Thomson's conception of the atom, which had negatively-charged electrons buried inside a positively-charged "soup," the atom was made of plum pudding. Protons, electrons, and neutrons are the three fundamental particles that make up an atom. The protons (which are positively charged) and neutrons (which are neutrally charged) are found in the nucleus (center) of an atom (no charge). The electrons are contained inside the electron shells, which are the outermost parts of the atom (negatively charged).
2. Given that the frequency is 1/T, the equation linking wave speed, frequency, and wavelength is v=f t. The relationship between frequency and wavelength is inversely proportional. The wavelength of the wave with the highest frequency is also the shortest. When the frequency is doubled, the wavelength is cut in half. As a result, the wavelength to frequency ratio is the inverse of the frequency to wavelength ratio. When it comes to carrying energy, the frequency and amplitude of the waves are important factors to consider. The higher the frequency, the greater the amount of energy, and the larger the amplitude, the greater the amount of energy.
3. There are four shells that scientists used. First shell contains 2 electrons. Second shell consists of 8 electrons. Third shell has 18 electrons. Lastly, fourth shell has 32 electrons. 2 electrons can fit into each shell. If you want to compute an electron configuration, first split the periodic table into portions that represent the atomic orbitals, which are the locations where electrons are found. The s-block is represented by groups one and two, the d-block by groups three through twelve, the p-block by groups thirteen through eighteen, and the f-block by the two rows at the bottom.
Explanation:
That's the three questions I chose to answer. Hope it helps;)
convert 3.79 x 10^24 atoms of sodium to grams
mol = 3.79 × 10^24/6.02 × 10^23 = 6.296 mol
mass = 6.296 × 23 = 144.808 grams
The stationary state with the lowest energy is called the _______.
Answer:
Ground state
the state with the smallest amount of energy.
How are prisms and raindrops alike?
They are both transparent.
They both reflect white light.
They are both translucent.
They both refract white light.
they both refract white light.
Answer:
They both reflect white light.
Explanation:
How raindrops and prism are similar?
Raindrops and prisms are similar because they both cause light to bend when it enters a prism or raindrop. When light enters a raindrop it causes the light to bend (refract) and separates the white lights into different wavelengths, allowing us to see the individual colors of the rainbow.
NEED ANSWER ASAP ! WILL BRAINLIST !
• Cillian is a company that uses a particular kind of wood to manufacture its products. Suppose the economy is experiencing high demand for trees from which this wood is obtained.
• Which is a likely response to this rising demand?
A. New distribution systems will be used to improve delivery of the wood to Cillian.
B. The trees will be regulated to maintain the availability of the wood.
C. New processes will be developed to locate the trees more efficiently.
D. The wood will be used as quickly as possible.
Which type of energy uses the photoelectric effect?
Biomass
Solar
Geothermal
Wind
Answer:
My lovely people the answer is SOLAR
Explanation:
i just know
The type of energy that uses the photoelectric effect is solar energy. Therefore, the correct option is option B.
When light strikes a material surface, the photoelectric effect takes place, which results in the emission of electrons. Albert Einstein made this intriguing discovery in 1905, and it was essential in the development of quantum physics and our comprehension of the nature of light. The fundamental principle underlying the photoelectric effect is that light is made up of small energy packets known as photons. A photon's energy can be transferred to an electron in a solid or atom when it interacts with those structures. The type of energy that uses the photoelectric effect is solar energy.
Therefore, the correct option is option B.
To know more about photoelectric effect, here:
https://brainly.com/question/33463799
#SPJ6
Consider a 0.241 M aqueous solution of sodium hydroxide, NaOH.
A. How many grams of NaOH are dissolved in 24.43 mL?
B. How many individual hydroxide ions (OH-) are found in 24.43 mL?
C. How many moles of sulfuric acid, H2SO4, are neutralized by 24.43 mL of 0.241 M NaOH(aq)?
Answer:
a. 0.2355052g
Explanation:
a)
1000ml of NaOH contain 0.241moles
24.43ml of NaOH contain (24.43*0.241)/1000 moles
= 0.00588763moles
Relative Molecular Mass of NaOH
= 1*23 + 1*16 + 1*1
= 40
1mole of NaOH weighs 40g
0.00588763moles weigh (0.00588763*40) g
= 0.2355052g
B)
NaOH -> Na+ + -OH
1 mole of NaOH dissociates to form 1 mole of -OH ions
1 mole of a substance contains 6.02*10^23 particles(atoms)
= 0.00588763 * 6.02 *10^23
= ______ions
Based on the electron configuration of the two
atoms, predict the ratio of metal cationic (+) atom
to nonmetal anionic (-) atom in the compound.
Hydrogen 1s
Fluorine 1s22s22p5
A. 2:3
B. 1:2
C. 1:1
D. 3:2
Answer:
1 per 2 berarti a.2:3 berarti bagi bagi 1 22. 22 sama dengan 5
in a test trial, using 6% extra strength bleach at room temperature, 100.0 mL of oxygen gas was produced in 2.03 seconds. Calculate the average reaction rate for the oxygen gas.
The average reaction rate for oxygen gas is 49.26 mL/s
The average reaction rate of a substance refers to the speed at which a reaction occurs and therefore products are formed. In the reaction presented, oxygen gas is the product.
Moreover, the average reaction rate can be expressed in mL per second or mL/s, and the formula to calculate it is:
Product in mL/seconds
Let's calculate the reaction rate:
100 mL/ 2.03 s = 49.26 mL/sLearn more about oxygen in: https://brainly.com/question/1506082
1) Which statement best describes the usefulness of a model to investigate molecules at the microscopic level?(1 point)
A model’s usefulness depends on whether direct observations of phenomena can be made.
All models are useful.
A model’s usefulness depends on the accuracy of its predictions.
Models are not useful at all.
2) Which scientist contributed to molecular theory by explaining that gas pressure is caused by the impact of gas molecules on surfaces?(1 point)
Daniel Bernoulli
Amedeo Avogadro
John Dalton
Robert Boyle
3) Which term did Avogadro create?(1 point)
molecule
microscope
kinetic energy
atom
4) Which statement best describes the development of theories that connected microscopic and macroscopic phenomena?(1 point)
It took several hundred years for scientists to develop current theories, and they are essentially concrete.
It only took a few decades for scientists to develop current theories, and they are still being revised to this day.
It only took a few decades for scientists to develop current theories, and they are essentially concrete.
It took several hundred years for scientists to develop current theories, and they are still being revised to this day.
5) How can the results of experiments investigating the relationship between microscopic and macroscopic phenomena affect a model of molecular theory?(1 point)
Consistent results support the validity of the model, while inconsistent results require throwing out the model entirely.
Consistent results require throwing out the model entirely, while inconsistent results support the validity of the model.
Consistent results support the validity of the model, while inconsistent results indicate the need to modify the model.
Consistent results indicate the need to modify the model, while inconsistent results support the validity of the model.
Answer:
1. A model’s usefulness depends on the accuracy of its predictions.
2. Daniel Bernoulli
3. molecule
4. It took several hundred years for scientists to develop current theories, and they are still being revised to this day.
5. Consistent results support the validity of the model, while inconsistent results indicate the need to modify the model.
Explanation:
The discovery that macroscopic and microscopic phenomena are connected took several hundred years.
A model is a representation of a real life system that serves as a tool for predictions and explanation. Since models serve a predictive purpose, a model’s usefulness depends on the accuracy of its predictions.
The pressure of a gas is caused by the collision of gas molecules with the walls of the container. This was established by the scientist called Daniel Bernoulli.
Avogadro was able to create the term molecule to describe a substance that has independent existence. The discovery that macroscopic and microscopic phenomena are connected took several hundred years. It took several hundred years for scientists to develop current theories, and they are still being revised to this day.
The results of experiments investigating the relationship between microscopic and macroscopic phenomena affect a model of molecular theory in the sense that consistent results support the validity of the model, while inconsistent results indicate the need to modify the model.
Learn more: https://brainly.com/question/2289444
_________.__________ and___________ are energy science
Answer:
Chemical, Mechanical, and Nuclear Energy
Explanation:
PLEASE I WILL GIVE BRAINLISET PLS HELPPPP
Answer:
the answer is A because the rest wouldnt go good with the work
Explanation:
What you see as you look up at the night sky depends on the weather, the time of year, your location, and how dark your surroundings are. The
---
and stars are the celestial objects most people can see in the night sky.
the [moon] and stars are what most people see.
Electrical bonding refunding quick check!!
A team wants to understand the effects of molecular weight on boiling point. The team has access to five substances with
different molecular weights and the time to measure 50 boiling points. How can the team make the best use of the laboratory
testing time? (1 point)
O by taking 10 measurements of each of the five liquids and using the highest value from each set
O by taking 10 measurements of each of the five liquids and finding an average
O by taking measurements of the liquids one at a time, making sure that the correct results are achieved before
moving on to another liquid
O by taking one measurement of each liquid and then working to improve the least certain liquid in the group
Answer:
1. More data should be collected to get a more reliable average
2. A boiling point at 1.5 atmospheres could be predicted fairly well
3. The actual boiling point is probably between 34 C and 40 C
4. By taking 10 measurements of each of the five liquids and finding an average
5. The thermometer being used might need to be recalibrated
Explanation:
Took the quick check
How many ml of a 2.903 M NaOH solution are needed to produce 500.0 ml of a 0.3344M solution?
Answer:
About 57.60 mL.
Explanation:
We can utilize the dilution equation:
[tex]\displaystyle M_1V_1 = M_2V_2[/tex]
Where M are the molarities of the solutions and V are the volumes of the solutions.
We want to determine the volume of a 2.903 M NaOH solution to mix in order to produce 500.0 mL of a 0.3344 M solution.
Substitute and solve for V₁:
[tex]\displaystyle \begin{aligned} (2.903 \text{ M})V_1 & = (0.3344 \text{ M})(500.0 \text{ mL}) \\ \\ V_1 & = 57.60\text{ mL} \end{aligned}[/tex]
In conclusion, 57.60 mL of a 2.903 M NaOH solution is needed.
Lithium has an atomic mass of 6.941 amu. Lithium has two isotopes. One isotopes has a mass of 6.015 amu with a relative abundance of 7.49%. What is the mass of the other isotopes?
Explanation:
List the known and unknown quantities and plan the problem. Change each percent abundance into decimal form by dividing by 100. Multiply this value by the atomic mass of that isotope. Add together for each isotope to get the average atomic mass.
Answer:
The atomic mass of second isotope is 7.016
Explanation:
Given data:
Average Atomic mass of lithium = 6.941 amu
Atomic mass of first isotope = 6.015 amu
Relative abundance of first isotope = 7.49%
Abundance of second isotope = ?
Atomic mass of other isotope = ?
Solution:
Total abundance = 100%
100 - 7.49 = 92.51%
percentage abundance of second isotope = 92.51%
Now we will calculate the mass if second isotope.
Average atomic mass of lithium = (abundance of 1st isotope × its atomic mass) +(abundance of 2nd isotope × its atomic mass) / 100
6.941 = (6.015×7.49)+(x×92.51) /100
6.941 = 45.05235 + (x92.51) / 100
6.941×100 = 45.05235 + (x92.51)
694.1 - 45.05235 = (x92.51)
649.04765 = x 92.51
x = 485.583 /92.51
x = 7.016
The atomic mass of second isotope is 7.016
____________________________________________________
(Hope this helps can I pls have brainlist (crown)☺️)
How many ml of a 2.903 M NaOH solution are needed to produce 500.0 ml of a 0.3344M solution?
Answer:
57.6ml
Explanation:
Using dilution formula
C1V1 = C2V2
C1 = 2.903 M, V1 = ? , C2 = 0.3344 M , V2 = 500ml
2.903 × V1 = 0.3344 × 500
V1 =( 0.3344 × 500)/ 2.903
= 57.5956
≈ 57.6ml
Select the correct answer. What does the kinetic theory state about the relationship between the speed and temperature of gas molecules? A. As the temperature increases, the speed of gas molecules remains constant. B. As the temperature increases, the speed of gas molecules decreases. C. As the temperature increases, the speed of gas molecules increases. D. As the speed of gas molecules increases, the temperature becomes constant. E. As the temperature decreases, the speed of gas molecules increases.
Answer:
C. As the temperature increases,the speed of gas molecules increase.
17) An ethanol solution has a concentration of 0.500M. What volume in liters of this solution
would contain 8.0 moles of ethanol?
To calculate the Molar Concentration, we will find the molar concentration by dividing the moles by liters of water used in the solution. For example, the acetic acid here is completely dissolved in 1.25 L of water. Then divide 0.1665 moles by 1.25 L to get the molar concentration, which will be 0.1332 M.
Hope It Helpz(◕ᴥ◕)This is due tomorrow please help!
Answer:
Normal Fault -> Tension
Reverse Fault -> Compression
Strike-Slip Fault -> Shearing
Explanation:
Normal Fault -> Tension
[] A normal fault is when the walls are being pulled apart and is caused by tension
[] Example:
<- ->
Reverse Fault -> Compression
[] A reverse fault is when the walls are being pushed together and is caused by compression
[] Example:
-> <-
Strike-Slip Fault -> Shearing
[] A strike-slip fault is when the walls are being pushed apart in parallel directions and is caused by shearing
[] Example:
/\ \/
Note: The page you provided also gives the answers for this specific question.
Have a nice day!
I hope this is what you are looking for, but if not - comment! I will edit and update my answer accordingly. (ノ^∇^)
- Heather
13) Which of the following is NOT a true statement concerning what happens in all chemical
reactions
A) The ways in which atoms are joined together are changed
B) New atoms are formed as products,
C) The starting materials are named reactants.
D) The bonds of the reactants are broken and new bonds of the products are formed,
E) in a word equation representing a chemical reaction, the reactants are written on the left
and the products on the right
BARI