To remove any impure residual crystals, the crystals are washed with cold water during the first filtration.
This process is termed as Recrystallisation, in which some compounds are purified. When a compound is synthesized in solid form, there are some impurities present. So, in order to remove those impurities, we recrystallize it under some specific conditions.
Recrystallisation is also known as Fractional distillation. This process is a time consuming process. We have certain Solubility curves that are used to predict the outcome of the Recrystallization process. This process gives the best results when the impurities are small in amount.
Read more about Recrystallization process,
https://brainly.com/question/538389
Answer:
In the case of crystallization, the liquid may contain impurities that can reincorporate into the solid if not removed. To rinse a suction-filtered solid, the vacuum is removed and a small portion of cold solvent is poured over the solid (the " filter cake "). In the case of crystallization, the same solvent from the crystallization is used.
use standard enthalpies of formation to determine δhorxn for: 3no2(g) + h2o(l) → 2hno3(aq) + no(g)
The standard enthalpy change for the given reaction is -611.1 kJ. The negative sign indicates that the reaction is exothermic, releasing heat to the surroundings.
To calculate the ΔH°rxn for the given reaction, we need to subtract the sum of the standard enthalpies of formation of the reactants from the sum of the standard enthalpies of formation of the products.
First, let's determine the enthalpy change for the reactants. The standard enthalpy of formation for NO2(g) is +33.2 kJ/mol, and since there are three moles of NO2 in the reaction, the enthalpy change for 3NO2(g) would be 3 times that value, which is +99.6 kJ.
The standard enthalpy of formation for H2O(l) is -285.8 kJ/mol, and since there is one mole of H2O in the reaction, the enthalpy change for H2O(l) would be -285.8 kJ.
Now, let's determine the enthalpy change for the products. The standard enthalpy of formation for HNO3(aq) is -174.1 kJ/mol, and since there are two moles of HNO3 in the reaction, the enthalpy change for 2HNO3(aq) would be 2 times that value, which is -348.2 kJ.
The standard enthalpy of formation for NO(g) is +90.3 kJ/mol, and since there is one mole of NO in the reaction, the enthalpy change for NO(g) would be +90.3 kJ.
Now, we can calculate the ΔH°rxn by summing up the enthalpy changes of the products and subtracting the enthalpy changes of the reactants:
ΔH°rxn = (2 × -348.2 kJ) + (+90.3 kJ) - (+99.6 kJ) - (-285.8 kJ) = -611.1 kJ
Therefore, the standard enthalpy change for the given reaction is -611.1 kJ. The negative sign indicates that the reaction is exothermic, releasing heat to the surroundings.
Learn more about standard enthalpy change :
https://brainly.com/question/27961680
#SPJ11
Use linear algebra to balance the chemical equation: C7H₁6 +0₂ → CO₂ + H₂O. 20. Let V be the set of all vectors in ³ whose components sum to zero (e.g. (-5, 2, 3) is in the set V but (0, 0, 1) is not). Is V a subspace of R³2 Give compelling evidence either way. 15. (Determine the quadratic interpolant to the given data set using linear algebraic techniques. (The quadratic interpolant is a quadratic equation that best approximates the data set). {(6.667, 46.307), (4.567, 16.582), (3.333, 4.857)}
The balanced chemical equation is:
0.5C7H16 + O2 → 0.5CO2 + H2O
For balancing the chemical equation C7H16 + O2 → CO2 + H2O, we can use linear algebraic techniques. We need to determine the coefficients that balance the number of atoms on both sides of the equation.
Let's denote the coefficients for C7H16, O2, CO2, and H2O as a, b, c, and d, respectively.
The balanced chemical equation can be written as:
aC7H16 + bO2 → cCO2 + dH2O
To balance the carbon (C) atoms, we have:
7a = c (Equation 1)
To balance the hydrogen (H) atoms, we have:
16a = 2d (Equation 2)
To balance the oxygen (O) atoms, we have:
2b = 2c + d (Equation 3)
We have three equations (Equations 1, 2, and 3) and four unknowns (a, b, c, d). To solve this system of equations, we can write it in matrix form and find the solution using linear algebraic techniques.
The augmented matrix for the system of equations is:
[ 7 0 -1 0 | 0 ]
[ 0 0 0 -2 | 0 ]
[ 0 -2 2 -1 | 0 ]
By performing row operations to row-reduce the augmented matrix, we can obtain the solution:
[ 1 0 -0.5 0 ]
[ 0 1 -1 -0.5 ]
[ 0 0 0 0 ]
The solution to the system of equations is:
a = 0.5
b = 1
c = 0.5
d = 1
Putting the values of a,b,c, and d we get the balanced chemical equation as:
0.5C7H16 + O2 → 0.5CO2 + H2O
To learn more about balancing, visit:
https://brainly.com/question/31242898
#SPJ11
Let's use the concept of surface tension as surface energy per unit area to see if we can estimate, at least to the correct order of magnitude, the surface tension of water.
a) Water has a molar mass of 18 g/mol and a density of 1000 kg/m
(or 1 g/cm
). Based on this data, estimate the number of water molecules per unit surface area of water.
b) The coordination number of water (i.e., the average number of "neighbors" each water molecule has) in the liquid state is 4. Neighboring water molecules attract each other via hydrogen bonds, each of which has a binding energy of roughly 10
J (although this number depends relatively strongly on temperature). Use this information to estimate the surface tension of water. How does your estimate compare to the observed figure (surface tension of water = 0.072 N/m) (Hints: Keep in mind that we can think of surface tension as surface energy per unit area and consider the energy needed to bring a molecule from the bulk to the surface)?
The answer are using the concept of surface tension as surface energy per unit area:
a)There are approximately 1 × [tex]10^{19}[/tex] water molecules per unit surface area of water.
b)The surface tension of water is 4 ×[tex]10^{20}[/tex] J/m².
What is the surface tension?
Surface tension is a property of liquids that describes the cohesive force exerted by molecules at the surface of the liquid. In other words, surface tension is the measure of the tendency of the liquid surface to minimize its surface area.
a) To estimate the number of water molecules per unit surface area, we can use the molar mass and density of water.
Given:
Density of water (ρ) = 1000 kg/m³
First, we need to convert the molar mass of water to kilograms (kg):
Molar mass of water(M) = 18 g/mol
= 0.018 kg/mol
Next, we can calculate the number of water molecules per unit volume (m³) using Avogadro's number (NA):
Number of water molecules per unit volume = NA / M = 6.022 × [tex]10^{23}[/tex]molecules/mol / 0.018 kg/mol
≈ 3.34 × [tex]10^{25}[/tex] molecules/m³
To find the number of water molecules per unit surface area, we need to consider the thickness of the water layer. Let's assume a thickness of 1 molecule (approximately 0.3 nm).
Number of water molecules per unit surface area = Number of water molecules per unit volume × Thickness of water layer Number of water molecules per unit surface area
≈ 3.34 × [tex]10^{25}[/tex] molecules/m³ × 0.3 nm
= 1 ×[tex]10^{19}[/tex] molecules/m²
Therefore, there are approximately 1 × [tex]10^{19}[/tex] water molecules per unit surface area of water.
b) To estimate the surface tension of water using the given information, we can consider the hydrogen bonding interactions and their binding energy.
Given:
Coordination number of water (Z) = 4
Binding energy of one hydrogen bond ([tex]E_b[/tex]) = 10 J
The total energy needed to break all the hydrogen bonds between neighboring water molecules in the liquid state can be calculated as follows:
Total energy = Number of hydrogen bonds × Binding energy per bond Total energy = Z × Number of water molecules per unit surface area ×[tex]E_b[/tex]
Substituting the values:
Total energy ≈ 4 × 1 × [tex]10^{19}[/tex] molecules/m² × 10 J
≈ 4 ×[tex]10^{20}[/tex] J/m²
Surface tension (γ) is defined as the surface energy per unit area. Therefore, the surface tension of water can be estimated as:
Surface tension of water ≈ Total energy / Surface area Surface tension of water
≈ (4 ×[tex]10^{20}[/tex] J/m²) / 1 m²
= 4 × [tex]10^{20}[/tex] J/m²
Comparing this estimate to the observed surface tension of water (0.072 N/m or 0.072 J/m²), we see that our estimate is significantly higher. This discrepancy could be due to simplifications and assumptions made during the estimation process, as well as the approximate nature of the values used. Additionally, the actual surface tension of water can vary depending on factors such as temperature and impurities present in the water.
To learn more about the surface tension from the given link
brainly.com/question/138724
#SPJ4
dentify the ion with A +2 charge that has a ground state electronic configuration of 1s²2s²2p⁶3s²3p⁶4s²3d¹⁰4p⁶5s°4d¹⁰. Answer with the atomic symbol or name not the charge.
The ion with a +2 charge that has a ground state electronic configuration of 1s²2s²2p⁶3s²3p⁶4s²3d¹⁰4p⁶5s°4d¹⁰ is the ion of the element chromium, Cr²⁺.
This ion is formed when two electrons are removed from the neutral atom of chromium, which has an atomic number of 24. The electronic configuration of the neutral atom of chromium is [Ar]3d⁵4s¹. The removal of two electrons results in the electronic configuration of Cr²⁺, which has a completely filled 3d subshell and a half-filled 4s subshell.
The ion Cr²⁺ is commonly found in a variety of compounds, including chromates, dichromates, and various complexes. It is also used as a catalyst in a number of chemical reactions.
Learn more about electronic configuration here:
https://brainly.com/question/31812229
#SPJ11
How many molecules of NaOH are in 10.0 g of NaOH? *
The number of molecules in 10.0 gram of NaOH is 15 * 10²².
To solve this question, we need to understand some terms of mole concept,
Mole - It is the amount of substance containing same number of molecules or atoms as there are atoms in 12 gram of carbon-12 isotope.
Molecules - It is group of atoms bonded together, representing the smallest fundamental unit of a chemical compound taking part in chemical reaction.
Molecular weight - The sum of atomic masses of all atoms in molecules.
Avogadro number - It is the number of atoms, ions, electrons, molecules in one mole of substance. It is represented as NA.
NA = 6.0 * 10²³ (approx)
To calculate the number of molecules, we apply the formulae,
no. of molecules = moles * NA
moles = weight / molecular weight
moles = 10.0 / 40
= 0.25
Substituting this value to calculate number of molecules,
no. of molecules = 0.25 * 6.0 * 10²³
= 15 * 10²²
Therefore the number of molecules of in 10.0 g of NaOH is 15 * 10²².
To know more about moles and molecules,
https://brainly.com/question/29367909
there are ________ mol of bromide ions in 0.250 l of a 0.550 m solution of albr3 .
There are 0.413 mol of bromide ions in 0.250 L of a 0.550 M solution of AlBr₃. We use the formula to calculate the moles of AlBr₃ present in the solution: Moles of AlBr₃ = Molarity × Volume in litres
Moles of AlBr₃ = 0.550 × 0.250Moles of AlBr₃ = 0.138 mol of AlBr₃
Now, let's use the balanced chemical equation to determine the moles of bromide ions:2AlBr₃ → 6Br⁻ + 2Al3⁺
Therefore, 2 mol of AlBr₃ give 6 mol of Br⁻ .We already know that there are 0.138 mol of AlBr₃ in the solution. Therefore, the moles of Br⁻ present in the solution can be calculated as follows:0.138 mol of AlBr₃ × (6 mol of Br⁻ ÷ 2 mol of AlBr₃) = 0.414 mol of Br⁻
However, we need to keep in mind that the answer is rounded to the nearest thousandth, which would be 0.413. So, there are 0.413 mol of bromide ions in 0.250 L of a 0.550 M solution of AlBr₃.
To know more about bromide ions, refer
https://brainly.com/question/29228517
#SPJ11
the equilibrium concentration of chloride ion in a saturated lead chloride solution is
The equilibrium concentration of chloride ion in a saturated lead chloride solution depends on the solubility product constant (Ksp) of lead chloride at the given temperature and the initial concentration of lead and chloride ions in the solution.
The solubility product constant (Ksp) represents the equilibrium constant for the dissolution of an ionic compound in a solution. For lead chloride (PbCl₂), the Ksp is determined by the product of the concentrations of lead (Pb²⁺) and chloride (Cl⁻) ions at equilibrium. The equilibrium concentration of chloride ion depends on the stoichiometry of the dissolution reaction and the solubility of lead chloride.
In a saturated solution, the concentration of chloride ions is at its maximum, as the solution cannot dissolve any more lead chloride. However, the specific equilibrium concentration of chloride ions in a saturated lead chloride solution requires knowledge of the solubility product constant and initial concentrations of ions, which are not provided in the question.
To learn more about equilibrium concentration, here
https://brainly.com/question/11339051
#SPJ4
what is the pressure of a gas, when it is started at 18.0 atm, 3.0 l, and 25oc, and expanded to 12.0 l and heated to 35oc?
The pressure of the gas, when it is initially at 18.0 atm, 3.0 L, and 25°C, and then expanded to 12.0 L and heated to 35°C, can be calculated using the combined gas law.
By applying the formula P1V1/T1 = P2V2/T2, where P1, V1, and T1 are the initial pressure, volume, and temperature respectively, and P2, V2, and T2 are the final pressure, volume, and temperature respectively, we can determine the final pressure of the gas. Plugging in the given values, we find that the final pressure is approximately 8.15 atm. This calculation takes into account the change in volume and temperature, allowing us to determine the resulting pressure of the gas.
After rearranging and solving for P2, we find that the final pressure (P2) of the gas is approximately 8.15 atm.
To know more about combined gas law, click here:
https://brainly.com/question/30458409
#SPJ11
write the overall balanced equation for the reaction. sn(s)|sn2+(aq)∥no(g)|no−3(aq),h+(aq)|pt(s)
The overall balanced equation for the given reaction is given below;
[tex]$$\ce{Sn(s) + 4HNO3(aq) -> Sn(NO3)2(aq) + 2NO2(g) + 2H2O(l)}$$[/tex]
The given redox reaction is spontaneous and irreversible.
In the reaction, tin, HNO3, and platinum are reactants.
Tin is the reducing agent, and HNO3 is the oxidizing agent.
The reaction's products are nitric oxide (NO), nitrate ion (NO3-), and water (H2O).
The reaction can be divided into two half-reactions, the oxidation half-reaction and the reduction half-reaction.
Oxidation half-reaction:
[tex]$\ce{Sn(s) -> Sn^2+(aq) + 2e-}$[/tex]
Reduction half-reaction:
[tex]$\ce{4H+(aq) + NO3-(aq) + 3e- -> NO(g) + 2H2O(l)}$[/tex]
The oxidation half-reaction involves a tin atom that loses two electrons to form a Sn2+ ion.
In the reduction half-reaction, NO3- and H+ ions are combined with three electrons to create NO and water.
In the final step, we add these two half-reactions to obtain the overall balanced equation for the given redox reaction. After balancing the equation, we obtain the balanced equation as shown above.
Learn more about balanced equation at: https://brainly.com/question/11904811
#SPJ11
what is the number of sulfur atoms that equal a mass of 32.07 g?
The number of sulfur atoms that weigh 32.07 g = Avogadro's number × number of molesNumber of atoms = 6.022 × 1023 atoms/mol × 1 molNumber of atoms = 6.022 × 1023 atomsTherefore, the number of sulfur atoms that equal a mass of 32.07 g is 6.022 × 10^23 atoms.
The atomic mass of sulfur is 32.07 g/mol. Therefore, 1 mole of sulfur atoms weighs 32.07 g. This means that we have to find the number of sulfur atoms that weigh 32.07 g.Step 1: Determine the number of moles of sulfurStep 2: Calculate the number of atomsStep 1:The atomic mass of sulfur is 32.07 g/mol. The number of moles of sulfur = Mass of sulfur/ Atomic mass of sulfurNumber of moles of sulfur = 32.07 g/32.07 g/molNumber of moles of sulfur = 1 molStep 2:The Avogadro's number is used to calculate the number of atoms. Avogadro's number is the number of atoms in 1 mole of atoms. Avogadro's number = 6.022 × 1023 atoms/molTherefore, The number of sulfur atoms that weigh 32.07 g = Avogadro's number × number of molesNumber of atoms = 6.022 × 1023 atoms/mol × 1 molNumber of atoms = 6.022 × 1023 atomsTherefore, the number of sulfur atoms that equal a mass of 32.07 g is 6.022 × 10^23 atoms.
To Know more about Avogadro's number visit:
brainly.com/question/28812626
#SPJ11
Classify each substance as a strong acid, strong base, weak acid, or weak base. Drag the appropriate items to their respective bins NH3 HCOOH KOH CSOH CH3NH2 HF (CH3)2NH HI CH COOH HCIO
substance as a Strong Acid:
- HI
- HCIO
Strong Base:
- KOH
Weak Acid:
- HCOOH
- HF
- CH3COOH
Weak Base:
- NH3
- CH3NH2
Indeterminate:
- CSOH (This compound is not commonly known, and its acid/base strength cannot be determined without further information.)
Note: (CH3)2NH is not included in the given list.
what is acid?
Acid chemistry refers to the branch of chemistry that focuses on the properties, behavior, reactions, and applications of acids. Acids are a class of compounds that can donate protons (H+) or accept pairs of electrons in chemical reactions. They are characterized by their ability to increase the concentration of hydrogen ions in a solution.
Acid chemistry involves studying the following aspects:
1. Acidic properties: Acids exhibit certain characteristic properties, such as sour taste, ability to turn blue litmus paper red, and the ability to react with metals to produce hydrogen gas.
2. Acid-base reactions: Acids can react with bases to form salts and water in a process called neutralization. The study of acid-base reactions, including the concepts of proton donation and acceptance, pH scale, and indicators, is an essential part of acid chemistry.
3. Acid dissociation and ionization: Acids can dissociate or ionize in aqueous solutions, resulting in the formation of hydrogen ions (H+) and corresponding conjugate bases. The degree of dissociation or ionization is described by acid dissociation constants (Ka).
4. Acid strength: Acids can be classified as strong acids or weak acids based on their ability to dissociate or ionize in water. Strong acids completely dissociate, while weak acids only partially dissociate. Acid chemistry involves studying the factors that influence acid strength, such as molecular structure, polarity, and stability of the conjugate base.
5. Acid reactions and applications: Acids participate in various chemical reactions, including acid-catalyzed reactions, acid-promoted rearrangements, and acid-mediated transformations. Acid chemistry also explores the applications of acids in industries, such as the use of sulfuric acid in chemical synthesis, hydrochloric acid in pH adjustment, and organic acid catalysts in organic chemistry.
Overall, acid chemistry plays a vital role in understanding the behavior and reactivity of acids, their interactions with other substances, and their significance in various fields of chemistry and industry.
To know more about Acid visit:
brainly.com/question/13845995
#SPJ11
Calculate ΔHrxn for the following reaction:
CaO(s)+CO2(g)→CaCO3(s)
Use the following reactions and the given values of ΔH for them:
Ca(s)+CO2(g)+12O2(g)→CaCO3(s),ΔH2Ca(s)+O2(g)→2CaO(s),ΔH==−812.8kJ−1269.8kJ
Express your answer to four significant figures in kilojoules.
The enthalpy change for the given reaction CaO(s) + CO2(g) → CaCO3(s) is -227.0 kJ.
In the given reaction, we are required to find the enthalpy change (ΔHrxn) for the formation of calcium carbonate (CaCO3) from calcium oxide (CaO) and carbon dioxide (CO2). We can approach this by using the given reactions and their respective enthalpy values.
First, we use the reaction Ca(s) + CO2(g) + 1/2O2(g) → CaCO3(s) with a given ΔH of -812.8 kJ. However, we need to adjust this reaction to match the target reaction. We can reverse the reaction and change the stoichiometric coefficients by dividing through by 2, resulting in the equation CaCO3(s) → Ca(s) + CO2(g) + 1/2O2(g).
Next, we use the reaction Ca(s) + 1/2O2(g) → CaO(s) with a given ΔH of -1269.8 kJ. Again, we reverse the reaction and change the stoichiometric coefficients by multiplying through by 2, yielding the equation 2CaO(s) → 2Ca(s) + O2(g).
By summing up these two modified reactions, we obtain the target reaction CaO(s) + CO2(g) → CaCO3(s). Adding the ΔH values of the modified reactions (-812.8 kJ and -2539.6 kJ) gives us the ΔHrxn for the target reaction, which is -227.0 kJ.
Therefore, the enthalpy change for the given reaction CaO(s) + CO2(g) → CaCO3(s) is -227.0 kJ.
Learn more about enthalpy change :
https://brainly.com/question/29145818
#SPJ11
how many electrons are involved in pi bonding in benzene, c6h6?
In benzene (C6H6), there are 6 pi bonds formed by a total of 12 electrons.
Benzene (C6H6) is a cyclic compound with a hexagonal ring of carbon atoms, and each carbon atom is bonded to a hydrogen atom. In addition to the sigma bonds formed by overlapping orbitals between carbon and hydrogen atoms, benzene also exhibits pi bonding due to the presence of delocalized pi electrons in its molecular orbitals.
The pi bonding in benzene arises from the overlapping of p orbitals on adjacent carbon atoms. Each carbon atom in the benzene ring contributes one electron to the delocalized pi system. Since there are 6 carbon atoms in benzene, there are a total of 6 pi bonds formed. Each pi bond consists of two electrons, so the total number of electrons involved in pi bonding in benzene is 6 pi bonds multiplied by 2 electrons per bond, which gives us 12 electrons.
These delocalized pi electrons contribute to the stability of the benzene molecule and are responsible for its unique properties, such as aromaticity.
Learn more about pi bonds :
https://brainly.com/question/31321414
#SPJ11
what type(s) of intermolecular forces is (are) expected between brcl3 molecules? choose all that apply
The intermolecular forces expected between BrCl3 molecules are dispersion and dipole-dipole forces.
What more should you know about The intermolecular forces expected between BrCl3 molecules?Bromine trichloride (BrCl3) is a polar molecule due to its bent geometric structre, leading to a net dipole moment. which means thqt it exhibits dipole-dipole intermolecular forces.
Also, all molecules, regardless of their polarity, experience London dispersion forces. These forces arise due to temporary shifts in electron density, creating temporary positive and negative charges that can attract nearby molecules.
The above answer is in response to the full question below;
what type(s) of intermolecular forces is (are) expected between brcl3 molecules? choose all that apply
Dispersion
Dipole-dipole
ion - ion
Hydrogen bonding
Find more exercises on intermolecular forces;
https://brainly.com/question/9328418
#SPJ4
how many moles of oxygen gas are required to react completely with 11.47 moles of hydrochloric acid, according to the following chemical equation:
The number of moles of the oxygen gas will be required to react completely with 11.47 moles of hydrochloric acid is approximately 2.868 moles. Option B is correct.
Based on the given chemical equation;
4HCl + O₂ → H₂O + 2Cl₂
The stoichiometric ratio between HCl and O₂ is 4:1. This means that for every 4 moles of HCl, 1 mole of O₂ is required for complete reaction.
Given that you have 11.47 moles of HCl, we can calculate the corresponding moles of O₂ by setting up a proportion;
4 moles HCl / 1 mole O₂
= 11.47 moles HCl / x moles O₂
Cross-multiplying and solving for x;
4x = 11.47
x = 11.47 / 4
x ≈ 2.868
Therefore, the number of moles will be 2.868 moles.
Hence, B. is the correct option.
To know more about hydrochloric acid here
https://brainly.com/question/24784580
#SPJ4
--The given question is incomplete, the complete question is
"How many moles of oxygen gas are required to react completely with 11.47 moles of hydrochloric acid, according to the following chemical equation: 4HCl + O₂→ H₂O + 2Cl₂ a) 5.743b) 2.868c) 11.417d) 1.434."--
enter the half-reaction occurring at anode for the electrochemical cell labeled in part a.
An electrochemical cell typically consists of two half-cells, an anode (where oxidation occurs) and a cathode (where reduction occurs). Each half-cell involves a specific redox reaction.
If you provide me with more information about the specific electrochemical cell or its components, I can assist you in determining the half-reaction occurring at the anode.To determine the half-reaction occurring at the anode of an electrochemical cell, we need to know the specific components involved. Typically, the anode is the electrode where oxidation takes place.The specific oxidized species and the corresponding reduced species depend on the components of the electrochemical cell. If you provide me with more information about the electrochemical cell, such as the reactants and the overall cell reaction, I can help you determine the half-reaction occurring at the anode.
To know more about anode visit :
https://brainly.com/question/32499250
#SPJ11
if 20 liters of hydrogen gas (at stp) reacts with 20 grams of oxygen, how many grams of water can be produced
To determine the grams of water produced, we need to first balance the chemical equation for the reaction between hydrogen gas (H2) and oxygen (O2) to form water (H2O). The balanced equation is:
2H2 + O2 → 2H2O. From the balanced equation, we can see that 2 moles of H2 react with 1 mole of O2 to produce 2 moles of H2O. Given that the reaction is at STP (standard temperature and pressure), we can use the molar volume of gases at STP to calculate the number of moles of hydrogen gas. The molar volume of a gas at STP is 22.4 L/mol. Number of moles of H2 = (volume of H2 gas) / (molar volume of H2 at STP) = 20 L / 22.4 L/mol = 0.8928 mol. From the balanced equation, we know that the ratio of H2 to H2O is 2:2 (1:1). Therefore, the number of moles of water produced is also 0.8928 mol. To calculate the mass of water produced, we need to use the molar mass of water (H2O), which is approximately 18.015 g/mol. Mass of water produced = (number of moles of water) * (molar mass of water) = 0.8928 mol * 18.015 g/mol = 16.075 g. Therefore, approximately 16.075 grams of water can be produced from the reaction of 20 liters of hydrogen gas with 20 grams of oxygen at STP.
To learn more about hydrogen, https://brainly.com/question/31018544
#SPJ11
draw the structure(s) of the major organic product(s) of the following reaction. p-toluenesulfonic acid/toulene reflux
The p-toluenesulfonic acid/toluene reflux reaction leads to the formation of a product with a new sigma bond between the two carbons and a pi bond between the carbon and the hydrogen atom that was newly formed.
The major organic product(s) of the reaction p-toluenesulfonic acid/toulene reflux are as follows:
When toluene and p-toluenesulfonic acid are refluxed, p-toluenesulfonic acid replaces a hydrogen atom on the methyl group.
In the final structure, the sulfuric acid molecule departs and a carbocation appears. The electrons of the pi bond in the aromatic ring attack the carbocation, forming a sigma bond between the two carbons and a pi bond between the carbon and the newly formed hydrogen atom.
The reaction p-toluenesulfonic acid/toluene reflux results in the replacement of a hydrogen atom on the methyl group by the p-toluenesulfonic acid. This is then followed by the removal of the sulfuric acid molecule leading to the formation of a carbocation. The pi bond electrons of the aromatic ring then attack the carbocation, leading to the formation of a sigma bond between the two carbons and a pi bond between the carbon and the hydrogen atom that was newly formed. This reaction results in the formation of the major organic product(s) of the reaction p-toluenesulfonic acid/toulene reflux.
The p-toluenesulfonic acid/toluene reflux reaction leads to the formation of a product with a new sigma bond between the two carbons and a pi bond between the carbon and the hydrogen atom that was newly formed.
To know more about toluenesulfonic visit:
brainly.com/question/30902990
#SPJ11
what results are expected when an aromatic hydrocarbon is burned
When an aromatic hydrocarbon is burned, the expected result is carbon dioxide, water vapor, and heat energy.
The hydrocarbons that contain one or more aromatic rings are known as aromatic hydrocarbons. Aromatic hydrocarbons are a class of organic compounds that contain one or more aromatic rings. The presence of a benzene ring or a similar six-carbon ring with a continuous circle of electrons is required for a compound to be classified as aromatic.
The following are some of the most common aromatic hydrocarbons: Benzene, Toluene, Styrene, and Naphthalene. The majority of the aromatic hydrocarbons are highly flammable and burn in the air to produce carbon dioxide, water vapor, and heat energy. The energy released by burning aromatic hydrocarbons can be utilized in combustion engines and in other industrial applications.
Learn more about aromatic hydrocarbon at https://brainly.com/question/10117760
#SPJ11
what is the maximum number of moles of co2 that could be formed from 7 moles of ch4
The maximum number of moles of CO2 that could be formed from 7 moles of CH4 is 7 moles of CO2.
How many moles of CO2 are formed when one mole of CH4 is burned completely?
The balanced chemical equation for the complete combustion of methane, CH4 is:
CH4(g) + 2O2(g) → CO2(g) + 2H2O(g)
From the balanced equation above, one mole of CH4 reacts with 2 moles of O2 to form one mole of CO2 and 2 moles of H2O.
Therefore, the maximum number of moles of CO2 formed from 7 moles of CH4 can be found as follows:
7 moles of CH4 will react with 2 x 7 = 14 moles of O2
Assuming that the reaction goes to completion, all the 7 moles of CH4 will be completely consumed by 14 moles of O2 to form 7 moles of CO2.
Hence, the maximum number of moles of CO2 that could be formed from 7 moles of CH4 is 7 moles of CO2.
Learn more about a number of moles of CO2 from this link:
https://brainly.com/question/30632417
#SPJ11
what is a molecule? ————-
According to the context, the term may or may not include ions that meet this requirement. A molecule is a collection of two or more atoms held together by the attractive forces known as chemical bonds.
Thus, When speaking of polyatomic ions, the distinction between them and ions is frequently ignored in the fields of quantum physics, organic chemistry, and biochemistry.
A molecule can be heteronuclear, which is a chemical compound made up of more than one element, such as water (two hydrogen atoms and one oxygen atom; H2O), or homonuclear, which is a molecule made up of atoms of one chemical element, such as the two molecule in the oxygen molecule (O2).
The term "molecule" is frequently used to refer to any gaseous particle, regardless of its composition, in the kinetic theory of gases.
Thus, According to the context, the term may or may not include ions that meet this requirement. A molecule is a collection of two or more atoms held together by the attractive forces known as chemical bonds.
Learn more about Chemical bonds, refer to the link:
https://brainly.com/question/30387060
#SPJ1
what combination of carbonyl compounds would react to form the following product?
The desired product can be obtained by reacting a ketone with a primary amine in the presence of a reducing agent, such as sodium cyanoborohydride. This reaction is known as reductive amination.
The desired product can be synthesized through a reductive amination reaction, which involves the condensation of a carbonyl compound with a primary amine followed by reduction. In this case, a ketone is required as the carbonyl compound.
The first step involves the condensation of the ketone with the primary amine. The carbonyl group of the ketone reacts with the amine group of the primary amine, forming an imine intermediate. This condensation reaction is typically catalyzed by an acid, such as hydrochloric acid or sulfuric acid. The imine intermediate is formed as an imine linkage between the carbon of the carbonyl group and the nitrogen of the amine group.
The second step is the reduction of the imine intermediate to the desired product. This reduction is achieved by using a reducing agent, such as sodium cyanoborohydride (NaBH3CN). The reducing agent donates a hydride ion (H-) to the imine, resulting in the formation of the desired product, which is an amine.
Learn more about reductive amination :
https://brainly.com/question/14207331
#SPJ11
Answer:
Carbonyl compounds which are of low molecular weight (organic acids, ketones, and aldehydes) can undergo carbon coupling reactions to produce gasoline and diesel.
which example has particles that can be drawn closer to occupy smaller volume
One example of particles that can be drawn closer to occupy a smaller volume is a gas.
Understanding Gaseous StateIn the gaseous state, particles have high kinetic energy and are not strongly attracted to each other. They move freely and randomly, colliding with each other and the container walls.
Since there are minimal intermolecular forces holding them together, gas particles can be compressed or drawn closer together by reducing the volume of the container.
By decreasing the volume of a gas, such as by compressing it in a cylinder or container, the particles have less space to move around. They collide with each other more frequently, increasing the frequency of intermolecular collisions. As a result, the gas particles are drawn closer together, and the overall volume occupied by the gas decreases.
Learn more about gaseous substance here:
https://brainly.com/question/30482059
#SPJ1
use the heat of vaporization to calculate the entropy change for the vaporization of water at 25 ∘c ( δhvap at 25 ∘c = 44.02 kj/mol ).
Heat of vaporization is the quantity of heat energy that is required to convert a mass unit of a given substance from a liquid state into vapor at constant pressure and temperature, and entropy change is the measure of the degree of randomness or disorderliness of a system.
If the heat of vaporization (ΔHvap) and the temperature (T) of a substance are known, the entropy change (ΔSvap) can be calculated by using the following formula:ΔSvap = ΔHvap / T
Therefore, the entropy change for the vaporization of water at 25 ∘c ( δHvap at 25 ∘c = 44.02 kj/mol) is given by:
ΔSvap = 44.02 kJ/mol / (25 + 273.15) K
ΔSvap = 0.1606 kJ/K mol
Thus, the entropy change for the vaporization of water at 25 ∘c is 0.1606 kJ/K mol.
For more information on heat of vaporization kindly visit to
https://brainly.com/question/32089177
#SPJ11
Identify the most polar solvent.
A. Carbon tetrachloride
B. Toluene
C. Octane
D, Acetone
E. Sodium chloride
Please explain how to arrive at the answer
The most polar solvent is D) Acetone. Solvents are compounds that dissolve substances in it, forming a homogeneous mixture. Hence, option D) is the correct answer.
Polar solvents have a positive and negative charge on opposite ends of the molecule, such as water, which is why it dissolves polar substances and forms hydrogen bonds.
Nonpolar solvents are substances that lack polar bonds and are therefore incompatible with polar solvents. Nonpolar solvents include hexane and benzene. Polarity is the key factor determining a substance's solubility in a solvent. The more polar a solvent, the more likely it is to dissolve polar solutes. Similarly, nonpolar solvents dissolve nonpolar solutes.
When we look at the given options for the most polar solvent, we can quickly eliminate Carbon tetrachloride, Toluene, Octane, and Sodium chloride as polar solvents. Carbon tetrachloride and Toluene are both nonpolar solvents and cannot dissolve polar substances, while Octane is a less polar solvent and cannot dissolve as many polar solutes as Acetone. Acetone is a polar solvent that can dissolve polar substances. Because it has a polar carbonyl group that attracts polar solutes, it is more polar than octane.
Therefore, the most polar solvent is Acetone. Option D, Acetone, is the correct answer.
To know more about polar solvent, refer
https://brainly.com/question/3184550
#SPJ11
How many stereoisomers are possible for CH2Cl2 provided that the central carbon has a square planar geometry?
If the central carbon in CH₂Cl₂ has a square planar geometry, then there are two possible configurations of the chlorine atoms - they can be cis or trans to each other.
The cis configuration has the two chlorine atoms on the same side of the molecule, while the trans configuration has them on opposite sides.
In a cis configuration, there are two possible stereoisomers because the two chlorine atoms can be either on the top or bottom of the molecule. In a trans configuration, there is only one stereoisomer because the two chlorine atoms are already on opposite sides.
Therefore, the total number of stereoisomers for CH₂Cl₂ with a square planar geometry is three: two cis stereoisomers and one trans stereoisomer.
In summary, there are three possible stereoisomers for CH₂Cl₂ with a square planar geometry: two cis stereoisomers and one trans stereoisomer.
Learn more about stereoisomers here:
https://brainly.com/question/30547988
#SPJ11
if the temperature is held constant, how does increasing the volume of the container decrease pressure?
When the volume of a container is increased, the gas particles have more space to move around. This means they will hit the sides of the container less frequently. Given that presure is basically the force of these gas particles hiting the sides of the container, if they hit the sides less frequently due to more space, the pressure decreases.
How do we explain the relationship between volume and pressure?According to Boyle's law, at constant temperature, the pressure of a fixed amount of gas is inversely proportional to its volume. This means that if the volume of a container is increased, the pressure will reduce.
This can be explained by the fact that the molecules of a gas are constantly movng and colliding with the walls of the container.
When the volume of the container is increased, the molecules have more space to move around, and they collide with the walls of the container less often. This results in a lower pressure.
Find more exercises on volume and pressure;
https://brainly.com/question/29258039
#SPJ4
for the following battery: cd(s) | cdcl2(aq) || cl–(aq) | cl2(l) | c(s)
A) There is no reduction taking place at the C(s) electrode.
B) Electrons flow from the battery into a circuit from the Cd(s) electrode
C) The mass of Cl2 consumed is 0.02402 kg.
A) Reduction half reaction occurring at the C(s) electrode:
There is no reduction taking place at the C(s) electrode because carbon is not capable of gaining or losing electrons in this solution.
As a result, there is no overall reduction or oxidation reaction. In order to have a redox reaction, a metal is required at the electrode which can undergo reduction or oxidation.
B) Electrons flow from the battery into a circuit from the Cd(s) electrode because it is the electrode with a lower reduction potential.
The electrode at which reduction occurs is the one with a higher reduction potential and therefore the negative electrode.
The Cd(s) electrode has a higher reduction potential than the C(s) electrode, so electrons will flow from the Cd(s) electrode to the C(s) electrode.
C) Determine the mass of Cl2 that is consumed when a constant current of 713 A is delivered by the battery for a duration of 30.0 minutes.
Using Faraday's first law of electrolysis, the amount of any substance liberated or deposited during electrolysis is proportional to the quantity of electricity used.
Quantity of electricity used = Current x time = 713 A x 1800 s = 1,283,400 C
1F (faraday) = 96500 C
1 mol of Cl2 contains 2 faradays of electricity.
Therefore, 1 mol of Cl2 = 2 x 96500 C
Therefore, the amount of Cl2 produced will be:
mass = 1/2 Molar mass x (Quantity of electricity used/ 2x Faraday's constant)
Mass = 1/2 x 70.90 g mol-1 x (1,283,400 C / (2 x 96500 C mol-1)) = 24.02 g or 0.02402 kg.
Therefore, the mass of Cl2 consumed is 0.02402 kg.
The question should be:
In the battery, there is a Cd(s) electrode immersed in a CdCl2(aq) solution. The double vertical line represents a salt bridge or a porous barrier, and on the other side, there is a Cl^-(aq) electrode in contact with liquid Cl2(l) and a C(s) electrode.
A) denote reduction half reaction that is happening at the C(s) electrode. C(s) electrode: please provide. E^*=1.4 V
B) Electrons will flow out of which, Cd(s) electrode or into the C(s) electrode, providing the electrical current to the circuit.
C) calculate the mass of Cl2 that has been consumed when the battery delivers a constant current of 713 A for 30.0 min.(kg)
Learn more about reduction at: https://brainly.com/question/13892498
#SPJ11
A 0.605 gram sample of a certain metal, X, reacts with hydrochloric acid to form XCl3 and 450 ml of hydrogen gas collected over water at 25 degrees Celsius and 740 mm Hg pressure. What is the atomic weight of X?
The atomic weight of X is 103.8 g/mol. When A 0.605 gram sample of a certain metal, X, reacts with hydrochloric acid to form XCl3 and 450 ml of hydrogen gas collected over water at 25 degrees Celsius and 740 mm Hg pressure.
To solve this problem, we need to use the ideal gas law to find the number of moles of hydrogen gas produced, then use stoichiometry to determine the number of moles of X. From there, we can calculate the atomic weight of X.
Using the ideal gas law, we can calculate the number of moles of hydrogen gas:
PV = nRT
n = PV/RT
where P = 740 mmHg, V = 450 mL (which we convert to L by dividing by 1000), R = 0.08206 L·atm/mol·K, and T = 25°C + 273.15 = 298.15 K.
n = (740 mmHg * 0.450 L) / (0.08206 L·atm/mol·K * 298.15 K)
n = 0.0175 mol
From the balanced chemical equation for the reaction, we know that:
X + 3 HCl → XCl3 + 3 H2
So the number of moles of X is one-third of the number of moles of hydrogen gas produced:
n(X) = n(H2) / 3 = 0.00583 mol
Finally, we can calculate the atomic weight of X by dividing the mass of X by the number of moles of X:
atomic weight = mass / n(X)
0.605 g / 0.00583 mol = 103.8 g/mol
Therefore, the atomic weight of X is 103.8 g/mol.
To know more about hydrochloric acid visit
https://brainly.com/question/31980378
#SPJ11
calculate the percent yield that you obtained from your alkene bromination
When alkene is treated with a halogen, a halogenated alkane is formed. In this process, a pi bond is broken and two new sigma bonds are formed. Bromination of alkenes is one of the most widely used methods for the synthesis of alkyl halides.
To calculate the percent yield that you obtained from your alkene bromination, use the following formula:% Yield = Actual Yield / Theoretical Yield x 100When carrying out chemical reactions in the laboratory, it is frequently difficult to attain the theoretical yield. The yield that is actually achieved is referred to as the actual yield. By comparing the actual yield to the theoretical yield, the percentage yield can be calculated. When conducting a bromination reaction, the percent yield can be calculated by dividing the actual yield by the theoretical yield. The theoretical yield is the quantity of product that would be obtained if the reaction were to go to completion with no loss of reagents or product.Bromination reactions are typically performed in anhydrous conditions using an inert solvent such as carbon tetrachloride. With the addition of bromine to an alkene, bromonium ions are formed. Nucleophiles such as halides will react with the bromonium ion, resulting in the formation of an alkyl halide and regenerating the catalyst.
For more information on Bromination visit:
brainly.com/question/28938775
#SPJ11