C(diamond) + C(graphite) AG"=-29 kJ/mol. Which of the following best explains why the reaction represented above is not observed to occur at room temperature? a. The entropy of the system decreases because the carbon atoms in graphite are less ordered than those in Lamond. b. The reaction has an extremely large activation energy due to strong three- dimensional bonding among carbon atoms in diamond. c. The reaction does not occur because it is not thermodynamically favorable d. The rate of the reaction is extremely slow because of the relatively small value of LaTeX:\DeltaGo for the reaction.

Answers

Answer 1

The best explanation of why the reaction represented above is not observed to occur at room temperature is due to the reaction has an extremely large activation energy because of the strong three-dimensional bonding

among carbon atoms in diamond. The statement is option B.Explanation: Activation energy is the minimum amount of energy required to start a chemical reaction. For a reaction to occur, the energy provided to the reactant should be sufficient enough to reach the activation energy. The reaction represented above is C(diamond) + C(graphite) → 2C which is an exothermic reaction with ΔG° = -29 kJ/mol. Diamond and graphite are two different allotropes of carbon that exist in two different structures. In diamond, each carbon atom forms four covalent bonds with other carbon atoms to form a tetrahedral structure. The strong 3-D bonding between carbon atoms in diamond is why diamond is hard and has a high melting point. On the other hand, graphite has a planar hexagonal structure where each carbon atom forms three covalent bonds with other carbon atoms. Because of this bonding, graphite is soft and has a low melting point.The reaction represented above is an example of a high-temperature reaction. At room temperature, there is not enough energy to overcome the strong three-dimensional bonding among carbon atoms in diamond. Therefore, the reaction does not occur at room temperature.

to know more about carbon, visit

https://brainly.com/question/17545314

#SPJ11


Related Questions

what is the molar mass of methanol ch3oh and of ethanol ch3ch2oh

Answers

Methanol (CH3OH)

The molecular formula of methanol is CH3OH. It is a colorless, light, and volatile liquid with a faint odor like that of ethanol. Its molar mass can be determined as follows:

Carbon has a molar mass of 12.011 g/mol,

Hydrogen has a molar mass of 1.008 g/mol,

Oxygen has a molar mass of 15.999 g/mol

In methanol, there are four hydrogen atoms, one carbon atom, and one oxygen atom.

Therefore, the molar mass of methanol (CH3OH) is:

Methanol (CH3OH) molar mass = 1 x (12.011 g/mol) + 4 x (1.008 g/mol) + 1 x (15.999 g/mol) = 32.04 g/mol

Ethanol (CH3CH2OH)

The molecular formula of ethanol is CH3CH2OH. It is a colorless, flammable liquid that is volatile and has a characteristic odor. Its molar mass can be determined as follows:

Carbon has a molar mass of 12.011 g/mol,

Hydrogen has a molar mass of 1.008 g/mol,

Oxygen has a molar mass of 15.999 g/mol.

In ethanol, there are six hydrogen atoms, two carbon atoms, and one oxygen atom.

Therefore, the molar mass of ethanol (CH3CH2OH) is:

Ethanol (CH3CH2OH) molar mass = 2 x (12.011 g/mol) + 6 x (1.008 g/mol) + 1 x (15.999 g/mol) = 46.07 g/mol

Learn more about molar mass:

https://brainly.com/question/837939

#SPJ11

what is the future of gas chromatography based on the experts

Answers

Miniaturization and Portability: The trend towards miniaturization and portability is likely to continue in gas chromatography.

This includes the development of smaller, more compact GC instruments that can be used in field applications and point-of-care testing. Portable GC systems offer convenience and flexibility in various industries such as environmental monitoring, food safety, and pharmaceuticals.Advances in Column Technology: Continuous improvements in column technology are expected, focusing on higher efficiency and selectivity. New column materials, coatings, and stationary phases are being developed to enhance separation capabilities, increase sensitivity, and reduce analysis time.

To know more about sensitivity visit :

https://brainly.com/question/14857334

#SPJ11

a general principle of ionic compound formation is that the total ionic charge in the formula unit must be

Answers

An ionic compound is formed as a result of the ionic bond between a metal and a nonmetal in which the metal transfers an electron to the nonmetal to form an ion.

Because the metal loses electrons to the nonmetal, it becomes cationic, while the nonmetal, which gains electrons, becomes anion.

The total ionic charge in the formula unit must be zero.

The net charge on an ionic compound's ions is always zero.

The charges of the cations and anions combine to form a formula unit that is electrically neutral.

The total positive charges from cations must equal the total negative charges from anions in order for the compound to be electrically neutral.

In summary, the total ionic charge in the formula unit must be zero in the case of ionic compound formation.

Learn more about electrons click here:

https://brainly.com/question/860094

#SPJ11

a 0.175 m weak acid solution has a ph of 3.25. find ka for the acid.

Answers

Answer: Ka = 5.71x10^-7

Explanation:

Let HA be the weak acidHA ==> H^+ + A^-

Ka = [H+][A-]/[HA]

Since pH = 3.25, this means [H+] = 1x10^-3.5 = 3.16x10^-4 = [A-] also.

Ka = (3.16x10^-4)(3.16x10^-4)/0.175

Ka = 5.71x10^-7

The value of Ka for the weak acid is as follows:Ka = [H+][A-] / [HA]⇒Ka = (0.009917)2 / (0.165)⇒Ka = 5.92 × 10^-5

Given information:

pH of weak acid = 3.25pH = - log[H+][H+] = antilog (-pH)= antilog (-3.25)= 5.62 x 10^(-4).

Now, 0.175 M solution of a weak acid is given.

Let’s assume that the acid is represented by the chemical formula HA.[H+] = [A-] = x (Since it is a weak acid, we can assume that it dissociates very little, so the concentration of H+ and A- ions can be taken as x).

Now, the concentration of HA can be assumed to be (0.175 - x)M.

We can apply the formula for the acid dissociation constant (Ka) of weak acids here, i.e., Ka = [H+][A-] / [HA]Ka = x2 / (0.175 - x), Ka = 5.62 × 10^-4.

Therefore, 5.62 × 10^-4 = x2 / (0.175 - x), The value of x is very small compared to 0.175.

Hence we can neglect x in comparison with 0.175.

Therefore,0.175 - x = 0.175∴5.62 × 10^-4 = x2 / (0.175)⇒x2 = 0.175 × 5.62 × 10^-4⇒x2 = 9.835 × 10^-5⇒x = √(9.835 × 10^-5)⇒x = 0.009917 mol/L

Now, [HA] = 0.175 - x = 0.175 - 0.009917 = 0.165 M

Therefore, the value of Ka for the weak acid is as follows: Ka = [H+][A-] / [HA]⇒Ka = (0.009917)2 / (0.165)⇒Ka = 5.92 × 10^-5

To learn more about acid visit;

https://brainly.com/question/29796621

#SPJ11

draw a simple connected weighted undirected graph with 8 vertices and 16 edges, and with distinct weights. identify one vertex as a start and illustrate a running of dijkstra's algorithms

Answers

A simple connected weighted undirected graph with 8 vertices and 16 edges was drawn, and vertex A was chosen as the starting point for Dijkstra's algorithm. Dijkstra's algorithm was then run, as explained in the steps above.

To draw a simple connected weighted undirected graph with 8 vertices and 16 edges, and with distinct weights, follow the steps below;1. Draw 8 vertices in the plane to represent the nodes of the graph2. Connect the vertices with 16 edges that must be weighted3. To have distinct weights, assign any weight you want to each edge.4. Choose one vertex as a start point for Dijkstra’s algorithm.Now, to illustrate a running of Dijkstra’s algorithm, follow the steps below. Let's take vertex A as the start point.1. Assign a tentative distance value to every vertex, set it to zero for the starting vertex and infinity for all other vertices. The starting vertex gets a permanent label of visited. The other vertices are labeled as unvisited.2. For the current vertex, examine its unvisited neighbors. Calculate their tentative distances through the current vertex, compare the newly calculated tentative distance to the current assigned value and assign the new value if the newly calculated tentative value is less than the current assigned value.3. Mark the visited vertex as ‘done’ and remove it from the unvisited set.4. Select the unvisited vertex that is marked with the smallest tentative distance, and set it as the new “current vertex” then repeat steps 2 and 3 until all the vertices are visited or the smallest tentative distance among the vertices remaining is infinity.

In summary, a simple connected weighted undirected graph with 8 vertices and 16 edges was drawn, and vertex A was chosen as the starting point for Dijkstra's algorithm. Dijkstra's algorithm was then run, as explained in the steps above.

Learn more about current vertex click here:

https://brainly.com/question/21191648

#SPJ11

δs for the following reaction is positive. true or false? n2o4(g) → 2 no2(g)

Answers

The entropy change (ΔS) for a reaction involving a decrease in the number of moles of gas molecules will be negative, while the entropy change for a reaction involving an increase in the number of moles of gas molecules will be positive. Therefore, for the given reaction:n2o4(g) → 2 no2(g). The number of gas molecules on the left side is one, while the number of gas molecules on the right side is two. As a result, there has been an increase in the number of moles of gas molecules (from one to two).Since the number of moles of gas molecules has increased in the reaction, we can conclude that the entropy change (ΔS) for the reaction is positive. Therefore, the statement "δs for the following reaction is positive" is true.

To know more about entropy change (ΔS) visit

https://brainly.com/question/17285535

#SPJ11

The given statement, "The Δs for the following reaction is positive" is true. The Δs for the given reaction is positive (True). When we talk about entropy, we talk about the randomness, disorder, or chaos of a system.

The Δs or entropy change is a measure of the extent of randomness or disorder in the system, and it is expressed in joules per Kelvin (J/K).The Δs value can be positive, negative, or zero. If the entropy of the products is greater than that of the reactants, Δs will be positive. Δs will be negative if the entropy of the reactants is greater than that of the products, while Δs will be zero if there is no change in the system's randomness or disorder.The given reaction is:N2O4(g) → 2 NO2(g)The reaction has two molecules of NO2 in the product, whereas there is only one molecule of N2O4 in the reactant. As a result, there is a greater degree of randomness in the product than in the reactant. Hence, Δs for the given reaction is positive.Therefore, the given statement, "The Δs for the following reaction is positive" is true.

To learn more about entropy visit;

https://brainly.com/question/20166134

#SPJ11

which of the following halides cannot be used for Friedel-Crafts alkylation reaction? Select one: a bromobenzene b. vinylchloride c. 2-chloropropane d. chloroethane O O e. both A& B

Answers

e. both A & B halides cannot be used for Friedel-Crafts alkylation reaction.

Both bromobenzene (option a) and vinyl chloride (option b) cannot be used for the Friedel-Crafts alkylation reaction.

The Friedel-Crafts alkylation reaction involves the introduction of an alkyl group onto an aromatic ring using a Lewis acid catalyst, typically aluminum chloride (AlCl₃). However, bromobenzene cannot undergo the Friedel-Crafts alkylation reaction because the reaction requires the presence of a halide that is more reactive than bromide. Bromobenzene is relatively unreactive in this reaction.

Similarly, vinyl chloride, which is an alkene, cannot undergo the Friedel-Crafts alkylation reaction because it does not possess an alkyl group that can be introduced onto the aromatic ring. The reaction requires the introduction of an alkyl group (an alkane) onto the aromatic ring.

Therefore, both bromobenzene and vinyl chloride cannot be used for the Friedel-Crafts alkylation reaction.

To know more about halides visit:

brainly.com/question/8486709

#SPJ11

which organic compound has the primary function of energy storage

Answers

Answer: Anjlllkii

Explanation:

The organic compound that has the primary function of energy storage is triglycerides.

They are esters that are composed of a glycerol molecule linked with three fatty acids.

Triglycerides are also called triacylglycerols and are the primary constituents of body fat in human beings, and animal fats and vegetable oils are dietary sources of triglycerides.

Tridglycerides are stored in adipose tissue, which is the tissue that makes up the fat in the body.

When the body requires energy, the adipose tissue hydrolyzes triglycerides into glycerol and fatty acids.

The fatty acids are then broken down into acetyl-CoA by a process called β-oxidation.

The acetyl-CoA is then oxidized through the citric acid cycle to produce ATP, which is the body's main source of energy.

Therefore, triglycerides play a significant role in the storage and provision of energy for the body.

They are the primary form of long-term energy storage, while carbohydrates are the primary form of short-term energy storage.

Triglycerides are also involved in the transportation of fat-soluble vitamins and provide insulation and protection to the body's organs.

Learn more about triglycerides at: https://brainly.com/question/28201446

#SPJ11

the solubility of ag2co3 at 21c is 24 g/l calculate the ksp at 21c

Answers

The solubility product constant, also known as Ksp, is a chemical equilibrium constant that refers to the equilibrium between a solid and its respective dissolved ions at a particular temperature. Ksp is used to calculate the solubility of a solute in a solvent based on the given data.

The Ksp expression for [tex][tex]Ag_{2}CO_{3}[/tex][/tex] is given below: [tex]Ag_{2}CO_{3}(s) = 2Ag^{+}(aq) + CO_{3}^{2-}(aq)[/tex]

At equilibrium, the concentration of [tex]Ag^{+}[/tex] and [tex]CO_{3}^{2-}[/tex] ions will be 2x and x, respectively.

Therefore, the Ksp of [tex][tex]Ag_{2}CO_{3}[/tex][/tex]  can be calculated by the following equation:

Ksp = [ [tex]Ag^{+}[/tex]]2[CO32-]Ksp = (2x)2(x)Ksp = 4*3

The solubility of [tex][tex]Ag_{2}CO_{3}[/tex][/tex]  at 21°C is 24 g/L, so it can be converted to moles per liter.

The molar mass of Ag2CO3 is 275.75 g/mol, as follows:24 g/L ÷ 275.75 g/mol = 0.0869 M

The concentration of [tex]Ag^{+}[/tex]  and [tex]CO_{3}^{2-}[/tex] ions in the solution is therefore: [ [tex]Ag^{+}[/tex]] = 2x = 2 * 0.0869 M = 0.174 M

[[tex]CO_{3}^{2-}[/tex]] = x = 0.0869 M

Substituting these values into the Ksp equation:

Ksp = [Ag+]2[[tex]CO_{3}^{2-}[/tex]-]Ksp = (0.174 M)2(0.0869 M)Ksp = [tex]2.51 * 10^{-5}[/tex] mol2/L2

The Ksp of [tex][tex]Ag_{2}CO_{3}[/tex][/tex]  at 21°C is therefore [tex]2.51 * 10^{-5}[/tex] mol2/L2.

The Ksp of [tex][tex]Ag_{2}CO_{3}[/tex][/tex]  at 21°C can be calculated by multiplying the concentrations of the  [tex]Ag^{+}[/tex] and CO32- ions in the solution raised to their stoichiometric coefficients, as shown in the main answer above. The Ksp of [tex][tex]Ag_{2}CO_{3}[/tex][/tex]  at 21°C is [tex]2.51 * 10^{-5}[/tex] mol2/L2.

For more information on solubility product kindly visit to

https://brainly.com/question/9615836

#SPJ11

The total response in the time domain is given as: 1 ls2+2Ew,S+W F(s)] s2+2EW,S+Wn Zero input response Zero state response After the initial condition excitation vanishes,which part of x(t) remains? Zero input response and zero state response Zero input response Zero state response None of the responses

Answers

When we solve the differential equation with zero initial conditions, we get the zero-input response. It is also referred to as a free response.

The given system's total response in the time domain is represented by:$$x(t) = [1/ls^2 + 2Ew,S + W] F(s) / [s^2 + 2EW,S + Wn]$$After the excitation of the initial condition vanishes, only the zero-state response part of x(t) remains.

Zero-state response (ZSR): When the system's initial condition is nonzero, the zero-state response is the system's output. It's the part of the response that isn't affected by the system's input.

When we solve the differential equation with zero input, we get the zero-state response (initial conditions only).The Zero-Input Response (ZIR): In a system with zero initial conditions, the Zero-Input Response (ZIR) is the system's response to zero input.

It's the part of the response that isn't affected by the system's initial conditions.

When we solve the differential equation with zero initial conditions, we get the zero-input response. It is also referred to as a free response.

to know more about differential equation visit :

https://brainly.com/question/1164377

#SPJ11

what is the ph of a solution made by mixing 0.30 molnaoh , 0.25 molna2hpo4 , and 0.20 molh3po4 with water and diluting to 1.00 l ? express your answer using two decimal places.

Answers

The pH of a solution that is made by mixing 0.30 mol NaOH, 0.25 mol Na₂HPO₄, and 0.20 mol  H₃PO₄ with water and diluting to 1.00 L. of the given solution is calculated as 1.44.  

The pH can be calculated using the equation: pH = -log[H⁺]Where[H⁺] = concentration of hydrogen ions in moles per liter (mol/L)

To find the [H⁺] of the given solution, we first need to calculate the concentrations of all the species in the solution. Since NaOH and Na₂HPO₄ are bases and  H₃PO₄ is an acid, we can assume that all of the NaOH and Na₂HPO₄ will react with  H₃PO₄ to form H2O and HPO₄²⁻ ions. The balanced chemical equation for the reaction is given below: 2 NaOH +  H₃PO₄ → Na₂HPO₄ + 2 H₂O1 Na₂HPO₄ +  H₃PO₄ → Na₂HPO₄ + H₂O

The reaction shows that 2 mol of NaOH react with 1 mol of  H₃PO₄ and 1 mol of Na₂HPO₄ reacts with 1 mol of  H₃PO₄. Therefore, to calculate the number of moles of H₃PO₄ remaining in the solution, we must subtract the number of moles of NaOH and Na₂HPO₄ that reacted with  H₃PO₄ from the initial number of moles of  H₃PO₄. The table below shows the initial number of moles and the number of moles that react: Species Initial number of moles

Moles that react with H₃PO₄  Remaining number of moles NaOH0.30 0.30 - 0.15 = 0.15 Na₂HPO₄ 0.25 0.25 - 0.125 = 0.125  H₃PO₄ 0.20 0.15 + 0.125 = 0.275. Now that we have the number of moles of each species in the solution, we can calculate the concentrations. The total volume of the solution is 1.00 L, so the concentration of each species is: NaOH: 0.15 mol/L Na₂HPO₄ : 0.125 mol/LHPO₄²⁻: 0.125 mol/L  H₃PO₄: 0.275 mol/L

To calculate the [H⁺], we first need to find the pKa of the H₃PO₄/H₂PO₄⁻ system.  H₃PO₄ has three ionizable hydrogens, so it can act as an acid three times:pKa1 = 2.15pKa2 = 7.20pKa3 = 12.35Since the pH of the solution will be determined by the ionization of the second hydrogen, we will use pKa2. The ionization reaction for H₂PO₄⁻ is given below: H₂PO₄⁻ + H₂O ⇌ HPO₄²⁻ + H₃O⁺. The Ka for this reaction is:Ka = [H₂PO₄⁻][H₃O⁺]/[H₂PO₄⁻]Since we know the Ka and the concentration of H₂PO₄⁻ (0.275 mol/L), we can solve for [H₃O⁺]:Ka = [HPO₄⁻][H₃O⁺]/[H₂PO₄⁻]

7.20 = (0.125 mol/L)([H₃O⁺])/(0.275 mol/L)[H₃O⁺] = 0.0362 mol/L

Now that we know the [H₃O⁺], we can calculate the pH: pH = -log[H₃O⁺]pH = -log(0.0362)pH = 1.44

Therefore, the pH of the given solution is 1.44.

To know more about pH, refer

https://brainly.com/question/172153

#SPJ11

chromatography separates solutions on the basis of while distillation separates solutions on the basis of

Answers

Distillation, separates solutions based on the differences in boiling points of the components.

What is distillation?

Based on the components of the mixture's varying affinities for a stationary phase and a mobile phase, chromatography separates solutions. The mobile phase is often a liquid or a gas, while the stationary phase might be either a solid or a liquid.

Contrarily, distillation divides solutions according to variations in the components' boiling points. The lower boiling point component will evaporate and ascend as a vapor when a combination is heated, whereas the higher boiling point component will remain in the liquid phase.

This technique takes advantage of the fact that various substances have varying boiling points. A purified component is then obtained by condensing and collecting the vapor.

Learn more about distillation:https://brainly.com/question/31829945

#SPJ4

what is the molar solubility of a saturated solution of la(io3)3 in a solution that has 0.0500m

Answers

To determine the molar solubility of La(IO3)3 in a solution with a concentration of 0.0500 M, we need to consider the solubility product constant (Ksp) for La(IO3)3.

The molar solubility of La(IO3)3 in a solution with a concentration of 0.0500 M cannot be directly determined without additional information. The given concentration of 0.0500 M likely corresponds to another compound or ion in the solution, not directly related to the solubility of La(IO3)3.To determine the molar solubility of La(IO3)3, we would need the solubility product constant (Ksp) specific to La(IO3)3 and any additional information about the system, such as pH or other relevant factors. Without these details, we cannot calculate the molar solubility of La(IO3)3 accurately.

To know more about solubility visit :

https://brainly.com/question/31493083

#SPJ11

identify the oxidizing agent in the following reaction: zn (s) cucl2 (aq) --> zncl2 (aq) cu (s)

Answers

The oxidizing agent in the given reaction is CuCl2.

In the reaction, Zinc (Zn) is being oxidized to form Zn2+ ions.

This means that Zn is losing electrons to form Zn2+.

This makes Zn the reducing agent .

On the other hand, Cu2+ ions are gaining electrons to form solid copper (Cu). This makes Cu2+ ions the oxidizing agent.Thus, the balanced equation is given below:Zn (s) + CuCl2 (aq) → ZnCl2 (aq) + Cu The oxidizing agent in the reaction: Zn (s) + CuCl2 (aq) → ZnCl2 (aq) + Cu (s) is CuCl2.

:In the given reaction, Zinc is oxidized and Copper ions are reduced, therefore the oxidizing agent is CuCl2.The oxidation half reaction is given below: Zn(s) → Zn2+(aq) + 2e-Reduction half reaction is given below: Cu2+(aq) + 2e- → Cu(s)CuCl2 gets reduced to Cu and Zinc gets oxidized to form Zn2+ ions.

Summary:Thus, the oxidizing agent in the given reaction is CuCl2.

Learn more about equation click here:

https://brainly.com/question/2972832

#SPJ11

a molecule with the formula ax4e2 uses _________ to form its bonds.

Answers

A molecule with the formula AX4E2 typically uses sp3d2 hybridization to form its bonds.

In this molecular formula, "A" represents the central atom, "X" represents the surrounding atoms, and "E" represents the lone pairs of electrons on the central atom.The central atom, "A," forms four sigma bonds with the surrounding atoms, "X," using its four sp3d2 hybrid orbitals. These hybrid orbitals are formed by mixing one s orbital, three p orbitals, and two d orbitals.The two lone pairs of electrons, "E," occupy the remaining two hybrid orbitals on the central atom, creating an octahedral electron geometry.

To know more about atom visit :

https://brainly.com/question/1566330

#SPJ11

Calculate the molality of a solution containing 275.0-grams of methane, CH4, dissolved in 300.0-m L of water.

Answers

The molality of a solution containing 275.0-grams of methane, CH₄, dissolved in 300.0-m L of water is 57.3 M.

What is the molarity of the solution?

The molality of a solution containing 275.0-grams of methane, CH₄, dissolved in 300.0-m L of water is calculated as follows;

The molarity of a solution is defined as the ratio of number of moles of solute to the volume of the solution in liters.

The number of moles of  275.0-grams of methane, CH₄ is;

n = 275 / 16

n = 17.19 moles

The volume of the solution in liters = 0.3 L

The molality of a solution containing 275.0-grams of methane, CH₄, dissolved in 300.0-m L of water is ;

= 17.19 moles / 0.3 L

= 57.3 M

Learn more about molarity here: https://brainly.com/question/14469428

#SPJ1

calculate the enthalpy change, δh∘, for the reverse of the formation of methane: ch4(g)→c(s)+2h2(g)

Answers

The enthalpy change, δH∘, for the reverse of the formation of methane is +74.8 kJ/mol.

The reverse of the formation of methane from carbon and hydrogen gas is given as, ch4(g)→c(s)+2h2(g).

The formation of methane from carbon and hydrogen gas is an exothermic reaction and the reverse reaction, which is the decomposition of methane, is an endothermic reaction.

To find the enthalpy change of the reverse reaction, δH°, we can use Hess's Law, which states that the enthalpy change of a reaction is independent of the route taken.

It means that the sum of the enthalpy changes of the reactants should be equal to the sum of the enthalpy changes of the products, regardless of the reaction pathway.

In this problem, we can use the enthalpy of formation of methane from its constituent elements, carbon and hydrogen.

The enthalpy change of the formation of methane is given by the following equation:

C(s) + 2H2(g) → CH4(g) ΔH° = –74.8 kJ/mol

This means that 74.8 kJ of heat is released when 1 mole of methane is formed from carbon and hydrogen gas.

Since the reverse reaction is the decomposition of methane into its constituent elements, the enthalpy change would be the opposite sign of the enthalpy change for the formation of methane.

Therefore,

ΔH°(reverse reaction) = -ΔH°(forward reaction) ΔH°(reverse reaction)

= -(-74.8 kJ/mol)ΔH°(reverse reaction)

= +74.8 kJ/mol

Thus, the enthalpy change, δH∘, for the reverse of the formation of methane is +74.8 kJ/mol.

Learn more about enthalpy change at: https://brainly.com/question/16387742

#SPJ11

which isomer do you expect to have the higher standard molar entropy?

Answers

The standard molar entropy of a substance is a measure of the degree of randomness or disorder of its particles. Generally, substances with more complex structures and more freedom of motion tend to have higher entropy values. In the case of isomers, the arrangement of atoms in the molecules is different, while the number and type of atoms are the same.

Therefore, the entropy of isomers is determined by the arrangement of atoms and their flexibility. If one isomer has a more ordered and rigid structure compared to the other, then it will have a lower standard molar entropy. Conversely, if one isomer has a more flexible and disordered structure, it will have a higher standard molar entropy. Thus, the isomer with a more complex and less ordered structure is expected to have a higher standard molar entropy.

When comparing isomers to determine which one has the higher standard molar entropy, you should consider their molecular complexity and freedom of motion. Generally, an isomer with more complex structure and greater freedom of motion will have higher standard molar entropy.


If you provide specific isomers to compare, I'd be happy to help you determine which one is expected to have the higher standard molar entropy.

To know more about isomers visit :

https://brainly.com/question/32508297

#SPJ11

i2(g) cl2(g)⇌2icl(g)kp=81.9 (at 298 k ) express your answer to three significant figures. view available hint(s)for part c kc = nothing

Answers

The value of Kc for the given chemical reaction is 4.66 × 10⁻⁴. from the equation i2(g) cl2(g) ⇌ 2icl(g).

Given, i2(g) cl2(g) ⇌ 2icl(g) Kp = 81.9 (at 298 K)

To find: KcKp = Kc(RT)Δn

Where,Kp = 81.9 (given)R = 0.0821 L atm K⁻¹ mol⁻¹, T = 298 K, Δn = (2 + 0) - (1 + 1) = 0 - 2 = -2

Kc = Kp(RT)ΔnR = 0.0821 L atm K⁻¹ mol⁻¹, T = 298 K, Δn = -2

Kc = 81.9 × (0.0821 × 298)⁻² × (1)

Kc = 4.66 × 10⁻⁴

Explanation: We are given a chemical reaction as i2(g) cl2(g) ⇌ 2icl(g)The equilibrium constant Kp is given as 81.9 at 298 K. For this reaction, the Δn is equal to -2. To find Kc, we use the formula: Kp = Kc(RT)Δn

Where, Kp is the equilibrium constant in terms of partial pressures. R is the universal gas constant. T is the temperature in Kelvin.Δn is the difference in the number of moles of gaseous products and gaseous reactants. Kc is the equilibrium constant in terms of molar concentrations.

Rearranging the above equation, we get: Kc = Kp / (RT)Δn

Substituting the given values, we get: Kc = 81.9 × (0.0821 × 298)⁻² × (1)Kc = 4.66 × 10⁻⁴

Hence, the value of Kc for the given chemical reaction is 4.66 × 10⁻⁴.

To learn more about reaction visit;

https://brainly.com/question/30464598

#SPJ11

he period of a simple pendulum depends on which of the following?
options:
The angle from which it is released
The length of the pendulum
The mass of the pendulum
The initial kinetic energy
all of the above
b) A simple pendulum, located at sea level, has a length of 0.6 cm. What is the angular frequency of oscillation?
options:
4.04 rad/s
12.8 rad/s
163.3 rad/s
40.41 rad/s
.061 rad/s
c) A mass-spring system oscillates on a frictionless table top. What is the spring constant, if the mass is 2.3 kg and the period is 4.8 s?
options:
52.9 N/m
3.94 N/m
3.01 N/m
11.04 N/m
18.9 N/m

Answers

A mass-spring system has a time period of 4.8 s and a spring constant of 3.01 N/m.so,. The answer is option C.

The period of a simple pendulum depends on the length of the pendulum. The angular frequency of oscillation of a simple pendulum is given as w = 2 / T. A mass-spring system oscillates on a frictionless table top and has a time period of 4.8 s. The spring constant of the mass-spring system is 3.01 N/m. The angle from which it is released, the mass of the pendulum, and the initial kinetic energy have no influence on the period of a simple pendulum.

The time period of the oscillation of the mass-spring system is given as T = 2 (m/k) where T = time period, m = mass, and k = spring constant. Substituting the given values, k = 42(2.3 kg) / (4.8 s)2 = 3.01 N/m.

To know more about time period  Visit:

https://brainly.com/question/31824035

#SPJ11

A simple pendulum's period depends on the length of the pendulum. The following statement is true about the period of a simple pendulum: "The period of a simple pendulum depends on the length of the pendulum."So, the correct answer is option b) The length of the pendulum.

Now, let's solve the second and third parts of your question. b) A simple pendulum, located at sea level, has a length of 0.6 cm.

The angular frequency of oscillation is given by: angular frequency = √(g/L)

Here, g = acceleration due to gravity = 9.81 m/s²and L = length of the pendulum = 0.6 m∴ angular frequency = √(9.81/0.6)≈ 4.04 rad/s

Thus, the correct option is option a) 4.04 rad/s.

c) A mass-spring system oscillates on a frictionless table top.

The spring constant (k) is given by:k = (2π/T)²mHere,m = mass = 2.3 kgT = time period = 4.8 sk = (2π/4.8)²×2.3≈ 52.9 N/m

Thus, the correct option is option a) 52.9 N/m.

To learn more about pendulum visit;

https://brainly.com/question/29268528

#SPJ11

What is the percent by volume of 5.75 mL of ethyl acetate in 7.85 mL of solution?

Answers

19.26 mL I also need the points for this so I hope this helps

an efficient algorithm for finding the optimal solution in a linear programming model is the:

Answers

The simplex algorithm is an efficient algorithm for finding the optimal solution in a linear programming model.

The simplex algorithm is a widely used method for solving linear programming problems. It efficiently searches for the optimal solution by iteratively improving the objective function value.

The algorithm starts with an initial feasible solution and then moves to neighboring solutions that improve the objective function value until an optimal solution is reached. At each iteration, the algorithm identifies a variable to enter the basis and a variable to leave the basis, which results in a more optimal solution.

The process continues until no further improvement can be made, indicating the optimal solution has been found. The simplex algorithm has a polynomial-time complexity and is often preferred for medium to large-scale linear programming problems due to its efficiency and effectiveness in finding the optimal solution.

Learn more about linear programming model :

https://brainly.com/question/28036767

#SPJ11

decrease the molar solubility of the solid relative to its molar solubility in pure water. If the constituent ions of a slightly soluble solid are already in solution, this will decrease the molar solubility of the solid. This is the result of the common ion effect .

Answers

The common ion effect is a phenomenon in which the solubility of a slightly soluble solid is reduced when its constituent ions are already in solution. This will cause a decrease in the molar solubility of the solid relative to its molar solubility in pure water.

What is solubility? Solubility is defined as the maximum amount of solute that can be dissolved in a given amount of solvent at a specific temperature and pressure. A solution is considered saturated when no more solute can be dissolved at the given conditions. Molar solubility is a measure of the concentration of a solute in a saturated solution, expressed in moles per liter (mol/L). It is determined by the solubility product constant (Ksp) of the solid .What is a soli d ?A solid is a form of matter that has a fixed shape and volume. It is composed of atoms, ions, or molecules arranged in a specific pattern. Some solids have a high solubility, while others have a low solubility, depending on the nature of the solute and the solvent.

to know  more about solvent, visit

https://brainly.com/question/25326161

#SPJ11

the hydrides of group 5a are nh3, ph3, ash3, and sbh3. arrange them from highest to lowest intermolecular forces.

Answers

The order of intermolecular forces in the hydrides of group 5A is NH3 > PH3 > AsH3 > SbH3.

This is because the intermolecular forces are inversely proportional to the size of the molecules.

:Intermolecular forces are the forces of attraction and repulsion that exist between molecules. These forces can be classified into four categories:London dispersion forces, dipole-dipole forces, hydrogen bonding, and ion-dipole forces. The strength of these forces increases as the size of the molecule increases.Therefore, the order of intermolecular forces in the hydrides of group 5A is NH3 > PH3 > AsH3 > SbH3.

This is because the size of the molecules decreases as you move from NH3 to SbH3. NH3 has the highest intermolecular forces because it is the largest molecule, while SbH3 has the lowest intermolecular forces because it is the smallest molecule.

Summary: The hydrides of group 5A are NH3, PH3, AsH3, and SbH3. The order of intermolecular forces in these molecules is NH3 > PH3 > AsH3 > SbH3. This is because the intermolecular forces are inversely proportional to the size of the molecules.

Learn more about molecules click here:

https://brainly.com/question/475709

#SPJ11

you have prepared a saturated solution of x at 20 ∘c using 43.0 g of water. how much more solute can be dissolved if the temperature is increased to 30 ∘c ?

Answers

The expression mass of solute = (solubility at 30°C / 100) × mass of solvent, where the solubility of x at 30 °C is greater than its solubility at 20 °C.

Using the given data, we can calculate the solubility of the solute, x at 20 °C as follows:

The solubility of a solute at a certain temperature is defined as the amount of solute in grams that dissolves in 100 g of solvent to prepare a saturated solution at that temperature.

This is given by the expression: solubility = (mass of solute / mass of solvent) × 100So, the solubility of x at 20 °C is:solubility at 20°C = (mass of solute / mass of solvent) × 100We can write this as:mass of solute = (solubility at 20°C / 100) × mass of solventmass of solute = (solubility at 20°C / 100) × 43.0gTo find the mass of solute x that can be dissolved at 30 °C, we need to use the expression:solubility at 30°C = (mass of solute / mass of solvent) × 100We can write this as:mass of solute = (solubility at 30°C / 100) × mass of solventSo, we need to find the solubility of x at 30 °C to solve for the mass of solute. The solubility of most solids increases with an increase in temperature.

This means that more solute can be dissolved at a higher temperature than at a lower temperature, provided the initial solution was not saturated.So, we can conclude that the mass of solute that can be dissolved at 30 °C will be greater than the mass of solute that was dissolved at 20 °C.

Summary: To summarize, we can say that to find the mass of solute x that can be dissolved in the solution at 30 °C, we need to use the expression mass of solute = (solubility at 30°C / 100) × mass of solvent, where the solubility of x at 30 °C is greater than its solubility at 20 °C.

Learn more about solubility click here:

https://brainly.com/question/23946616

#SPJ11

what mass of precipitate (in g) is formed when 20.5 ml of 0.500 m cu(no₃)₂ reacts with 38.5 ml of 0.500 m naoh in the following chemical reaction? cu(no₃)₂(aq) 2 naoh(aq) → cu(oh)₂(s) 2 nano₃(aq)

Answers

The mass of precipitate formed is 0.940 g (rounded off to three decimal places). The given chemical equation is Cu(NO₃)₂(aq) + 2NaOH(aq) → Cu(OH)₂(s) + 2NaNO₃(aq). The balanced chemical equation is: Cu(NO₃)₂(aq) + 2NaOH(aq) → Cu(OH)₂(s) + 2NaNO₃(aq).

We are given the following:

Volume of Cu(NO₃)₂ = 20.5 mL

Concentration of Cu(NO₃)₂ = 0.500 M

Volume of NaOH = 38.5 mL

Concentration of NaOH = 0.500 M

To calculate the mass of the precipitate formed, we will have to first calculate the limiting reagent. The limiting reagent is the reactant which is used up completely in the reaction. To calculate the limiting reagent, we will have to first calculate the number of moles of Cu(NO₃)₂ and NaOH.

Number of moles of Cu(NO₃)₂ = Concentration × Volume = 0.500 M × 20.5 mL / 1000 mL = 0.01025 mol Number of moles of NaOH = Concentration × Volume = 0.500 M × 38.5 mL / 1000 mL = 0.01925 mol

From the balanced chemical equation, we see that one mole of Cu(NO₃)₂ reacts with two moles of NaOH. So, the number of moles of NaOH required for 0.01025 moles of Cu(NO₃)₂ = 2 × 0.01025 mol = 0.0205 mol

From the above calculation, we can see that NaOH is the limiting reagent. So, we will have to calculate the number of moles of Cu(OH)₂ formed using the limiting reagent. Number of moles of Cu(OH)₂ formed = 0.01925 mol × 1 mol Cu(OH)₂ / 2 mol NaOH = 0.00963 mol

To calculate the mass of the precipitate formed, we will have to multiply the number of moles of Cu(OH)₂ formed by its molar mass. Molar mass of Cu(OH)₂ = Atomic mass of Cu + 2 × Atomic mass of O + 2 × Atomic mass of H= 63.55 g/mol + 2 × 15.99 g/mol + 2 × 1.01 g/mol= 97.56 g/mol

Mass of Cu(OH)₂ formed = Number of moles × Molar mass= 0.00963 mol × 97.56 g/mol= 0.940 g

Hence, the mass of precipitate formed is 0.940 g (rounded off to three decimal places).

To know more about precipitate, refer

https://brainly.com/question/30386923

#SPJ11

write a balanced half-reaction for the reduction of aqueous arsenic acid to gaseous arsine in basic aqueous solution.

Answers

The balanced half-reaction for the reduction of aqueous arsenic acid to gaseous arsine in a basic aqueous solution is given below. Therefore, four OH- ions are added to the left side to balance the charges. The balanced half-reaction is as follows: H2AsO4- + 6e- + H2O ⟶ AsH3 + 4OH-

In the basic solution, the half-reaction is as follows: H2AsO4- + 6e- ⟶ AsH3 + 4OH-As the half-reaction is balanced with six electrons, it becomes highly essential to balance the number of atoms on both sides of the equation. To balance the half-reaction, the following steps have to be followed:1) As a first step, balance the atoms of all the elements except hydrogen and oxygen. In this case, there are no elements other than oxygen, hydrogen, arsenic, and hydroxide ions on both sides.2) Secondly, balance the atoms of oxygen by adding H2O on the side that requires oxygen. In this case, the left side requires one more oxygen, and so one H2O molecule is added to it.3) Thirdly, balance the atoms of hydrogen by adding H+ ions. In this case, the left side requires six more hydrogen atoms, so six H+ ions are added to it.4) Finally, balance the charges on both sides of the half-reaction. In this case, the left side has a net charge of 2-, while the right side has a net charge of 0. Therefore, four OH- ions are added to the left side to balance the charges. The balanced half-reaction is as follows: H2AsO4- + 6e- + H2O ⟶ AsH3 + 4OH-The above half-reaction equation is balanced in a basic medium. Arsenic acid is reduced to arsine gas by adding an appropriate reducing agent and alkali to it.

To Know more about reduction visit:

brainly.com/question/8963217

#SPJ11

Calculate the energy levels of the pi-network in octatetraene, C8H10, using the particle in the box model. To calculate the box length, assume that the molecule is linear and use the values 135 and 154pm for C--C and C-C bonds. What is the wavelength of light required to induce a transition from the ground state to the first excited state?

Answers

The wavelength of light required to induce a transition from the ground state to the first excited state is 2004 pm.

To calculate the energy levels of the pi-network in octatetraene using the particle in the box model, we need to determine the box length. Since the molecule is linear, we can calculate the box length by summing the bond lengths.

Octatetraene (C8H10) has four carbon-carbon (C-C) bonds. Given that the C--C bond length is 135 pm and the C-C bond length is 154 pm, the total box length is:

Box length = 4 * C--C bond length + 3 * C-C bond length

= (4 * 135 pm) + (3 * 154 pm)

= 540 pm + 462 pm

= 1002 pm

Next, we can use the equation for the wavelength of light associated with a transition between energy levels:

Wavelength = 2 * Box length / n

Where n is the energy level.

For the transition from the ground state (n = 1) to the first excited state (n = 2), the wavelength of light required can be calculated as:

Wavelength = 2 * 1002 pm / (2 - 1)

= 2 * 1002 pm

= 2004 pm

Therefore, the wavelength of light required to induce a transition from the ground state to the first excited state is 2004 pm.

Know more about Octatetraene here:

https://brainly.com/question/31431025

#SPJ11

calculate the standard potential, ∘, for this reaction from its equilibrium constant at 298 k. x(s) y3 (aq)↽−−⇀x3 (aq) y(s)=4.09×10−4

Answers

In electrochemistry, the standard potential, represented by E∘, refers to the potential of an electrochemical half-cell when all reactants and products are in their standard state. This standard state means that all species in the half-cell are at a concentration of 1 M and are under 1 atm of pressure (for gases).

We can relate the standard potential to the equilibrium constant (K) through the Nernst Equation: E = E∘ − (RT/nF)ln(Q)where R is the gas constant, T is temperature (in K), n is the number of electrons transferred in the balanced half-reaction, F is the Faraday constant (96,485 C/mol), and Q is the reaction quotient. At standard conditions, Q = K and ln(Q) = 0, so the equation simplifies to: E = E∘ The given equation is x(s) y3 (aq) ⇽−−⇀ x3 (aq) y(s)The balanced half-reaction is:y3 (aq) + 3e− → y(s)So, n = 3 The given K is 4.09 × 10⁻⁴E = E∘ - (0.0592 V/n) log(K)E = E∘ - (0.0592 V/3) log(4.09 × 10⁻⁴)E = E∘ + 0.039 V Now, rearrange to solve for E∘:E∘ = E - 0.039 VE∘ = 0 - 0.039 VE∘ = -0.039 V Therefore, the standard potential, ∘, for the given reaction is -0.039 V.

For more information on electrochemistry visit:

brainly.com/question/31955958

#SPJ11

consider the mutated sequence for tay sachs disease. how many amino acids are changed by the insertion mutation?

Answers

The Tay-Sachs disease is an autosomal recessive genetic disorder that occurs in the Hexosaminidase A enzyme gene on chromosome 15q23-q24, resulting in a decrease in the hexosaminidase A activity.

This leads to the accumulation of GM2 ganglioside in the neurons of the central nervous system that causes mental and physical developmental delay in children, leading to death at an early age.

A single insertion mutation is caused in the HEXA gene in Tay-Sachs disease, which is the insertion of a cytosine in the coding sequence, which results in an alteration of the amino acid sequence. This alteration leads to the creation of a premature stop codon that truncates the HEXA gene translation prematurely, resulting in an unstable and truncated protein. The result is a deficient HEXA enzyme, resulting in Tay-Sachs disease.

The insertion of the cytosine nucleotide is responsible for changing the codon from CAG (glutamine) to CAC (histidine), which alters the amino acid at position 272 of the enzyme to histidine from glutamine. This single amino acid substitution is enough to cause disease manifestation

A single cytosine insertion mutation is caused in the HEXA gene in Tay-Sachs disease that alters the amino acid sequence, resulting in the creation of a premature stop codon, leading to an unstable and truncated protein. This alteration leads to deficient HEXA enzyme resulting in Tay-Sachs disease. The insertion of the cytosine nucleotide changes the codon from CAG (glutamine) to CAC (histidine), which changes the amino acid at position 272 of the enzyme to histidine from glutamine. This single amino acid substitution is enough to cause disease manifestation.

One amino acid is changed by the insertion mutation that leads to the alteration of the amino acid sequence in the Tay-Sachs disease. This change is enough to cause the disease manifestation that leads to the accumulation of GM2 ganglioside in the neurons of the central nervous system that results in mental and physical developmental delay in children, leading to death at an early age.

To know more about Tay-Sachs disease visit:

brainly.com/question/30899373

#SPJ11

Other Questions
The management of a firm decided that the daily marginal cost function to be MC(q) = 0.3q 230q+2000 rand/unit and the daily fixed cost R500000. Find the total cost incurred by the firm to produce the first 100 units. Show that each of the following sequences is divergenta. an=2nb. bn= (-1)nc. cn = cos n / 3d. dn= (-n)2 Quincy is single. His income of $250,300 includes: wages of $210,000, $1,500 of interest, $3,500 of tax-exempt interest, $2,500 of dividends, $30,000 of rental income, and $2,800 of capital gains. He has no other investment income, and none of the income is from a trade or business. Quincy will calculate his net investment income tax on ________________. answer choices are nonexcludable/excludable and rival/nonrivalExternalities and Public Goods - End of Chapter Problem a. A popular national forest known for having dozens of access points for its well-used hiking trails located along public roads and highways is Which of the following dramatic genres is most likely to be spontaneous?ComedyTragedyMelodramaPerformance Art describe nursing education that should accompany a patient with cholecystitis Find the equation of a parabola with focus (3, 4) and directrix y = 1. Assume that a machine with a cost of $90 000 has accumulated depreciation of $48 000 on the date of its disposal. What is the profit or loss on disposal of the old machine if it was traded-in for $40 000 on a new machine? (Ignore GST.)Which of the following statements about depreciation is true?a.The cash account is affected by depreciation charges.b.Accumulated depreciation is shown in the financial statements as a contra-expense account.c.Accumulated depreciation represents the amount of an asset's cost that has been transferred to depreciation expense to date.d.Depreciation represents the amount of cash available to replace assets when they wear out. the data in the table shows the price and quantity supplied for curtains. using the midpoint method, what is the price elasticity of supply from point c to point d ? Use standard Maclaurin Series to find the series expansion of f(x) = 6e4x ln(1 + 8x). a) Enter the value of the second non-zero coefficient: b) The series will converge if-d < x +d. Enter the valu The sum of two numbers is 3. The difference of the two numbers is -27. What are the two numbers? The first number = The second number= One company is considering one project that will cost $23,000 now and will result in an after-tax cash flow of $2.1 million at the end of the first year and these cash flows will grow at 2% per year indefinitely. The firm has a debt-equity ratio of 0.8, a cost of equity of 11%, and an after-tax cost of debt of 4.6%. This new project is somewhat riskier than the usual project the firm undertakes. Thus, the management team decides to discount the cash flows of the project by applying an adjustment factor of +3% to the cost of capital of the firm. Should the firm take on this project? Which two of the following statements are true of the Gig Economy? a. Gig work today is often made possible by technology. b. Gig workers only work for one company or person. c. Many workers value the flexibility allowed by these types of jobs. d. Companies generally provide benefits for gig workers. The Columbus-Taino partnership is explicit: The Taino Indianswill be punished if they dont find gold.TRUE/FALSE Functional Budgets. What is their purpose and pleaseexplain their weakness and of what criticism of budgeting. .True or Fasle. A conceptual model is a visual representation of a public health issue that maps out hypothesized relationships (causal or association) among determinants, risk factors, intermediate outcomes and long-term health outcomes. q2 reQUESTION 2 Which of the following statements is correct? 1. Treasury bills are short-term debt instruments issued by companies and/or the government. II. Repurchase agreements have a very liquid secon TES-712 Inc. is a retailer. Its accountants are preparing the company's 2nd quarter master budget. The company has the following balance sheet as of March 31.TES-712 Inc.Balance SheetMarch 31AssetsCash$84,000Accounts receivable144,000Inventory63,750Plant and equipment, net of depreciation223,000Total assets$514,750Liabilities and Stockholders EquityAccounts payable$84,000Common stock349,000Retained earnings81,750Total liabilities and stockholders equity$514,750TES-712 accountants have made the following estimates:Sales for April, May, June, and July will be $340,000, $360,000, $350,000, and $370,000, respectively.All sales are on credit. Each months credit sales are collected 35% in the month of sale and 65% in the month following the sale. All of the accounts receivable at March 31 will be collected in April.Each months ending inventory must equal 25% of next months cost of goods sold. The cost of goods sold is 75% of sales. The company pays for 40% of its merchandise purchases in the month of the purchase and the remaining 60% in the month following the purchase. All of the accounts payable at March 31 are related to previous merchandise purchases and will be paid in April.Monthly selling and administrative expenses are always $44,000. Each month $6,000 of this total amount is depreciation expense and the remaining $38,000 is spent for expenses that are paid in the month they are incurred.The company will not borrow money or pay or declare dividends during the 2nd quarter. The company will not issue any common stock or repurchase its own stock during the 2nd quarter.How much is the company's expected cash collections in the month of May?Multiple Choice$347,000$221,000$126,000$234,000 The following are the grades given for the first test in a statistics class: 50, 90, 80, 65, 74, 82, 75, 83, 88, and 86. The median score is ........................The mean weight of three gemstones is 20 grams. The weights of two of the stones are 15 grams and 17 grams. What is the weight of the third stoneIn a random sample of students 50% indicated they are business majors, 40% engineering majors, and 10% other majors. Of the business majors, 60% were females; whereas, 30% of engineering majors were females. Finally, 80% of the other majors were male. Given that a person is male, the probability that he is an engineering major is .............In an experiment, two 6-faced dice are rolled. The relevant sample space is ......................In an experiment, two 6-faced dice are rolled. The probability of getting the sum of 7 is ...................... A survey of couples in a certain country found that the probability that the husband has a college degree is .65 a) What is the probability that in a group of 9 couples, at least 6 husbands have a college degree b) If there are 24 couples, what is the expected number and standard deviations of husbands with college degree?