The total number of vertices in G is at least 7 + 2(n-2) = 2n + 3 > n, which is a contradiction.
Proof by contradiction is a method of proof that assumes the opposite of what has to be demonstrated and demonstrates that this hypothesis leads to a contradiction.
In this method of proof, we first assume that the statement that we want to show is false and then demonstrate that this leads to a contradiction.
In this way, we demonstrate that the original hypothesis must be true.
Let G be a simple graph on n ≥ 4 vertices.
We need to prove that if the shortest cycle in G has length 4, then G contains at most one vertex of degree n − 1.
Suppose the shortest cycle in G has length 4.
This means that the cycle is of the form:
[tex]$a - b - c - d - a$[/tex]
where a, b, c, and d are vertices in G and are all distinct.
Let's assume that G contains two or more vertices of degree n-1.
This means that there are two vertices, say u and v in G, such that the degree of u is n-1 and the degree of v is n-1.
Since u has degree n-1, it must be adjacent to all the other vertices in G except v.
Similarly, v must be adjacent to all the other vertices in G except u.
Since G is a simple graph, the vertices u and v must have at least one common neighbor, say w.
Let's consider the subgraph of G induced by the vertices a, b, c, d, u, v, and w.
This subgraph has 7 vertices, and since G has n ≥ 4 vertices, there are at least n - 3 other vertices in G that are not in this subgraph.
Since u and v have degree n-1, they each have at least n-2 neighbors in the rest of G.
Since u is adjacent to all the vertices in the subgraph except v and w, and since v is adjacent to all the vertices in the subgraph except u and w, it follows that u and v together have at least 2(n-2) neighbors outside the subgraph.
This means that the total number of vertices in G is at least 7 + 2(n-2) = 2n + 3 > n, which is a contradiction.
To know more about hypothesis, visit
https://brainly.com/question/32562440
#SPJ11
.a≤x≤b 7. Let X be a random variable that has density f(x)=b-a 0, otherwise The distribution of this variable is called uniform distribution. Derive the distribution F(X) (3 pts. each)
To derive the distribution function F(X) for the uniform distribution with the interval [a, b], we can break it down into two cases:
1. For x < a:
Since the density function f(x) is defined as 0 for x < a, the probability of X being less than a is 0. Therefore, F(X) = P(X ≤ x) = 0 for x < a.
2. For a ≤ x ≤ b:
Within the interval [a, b], the density function f(x) is a constant value (b - a). To find the cumulative probability F(X) for this range, we integrate the density function over the interval [a, x]:
F(X) = ∫(a to x) f(t) dt
Since f(x) is constant within this range, we have:
F(X) = ∫(a to x) (b - a) dt
Evaluating the integral, we get:
F(X) = (b - a) * (t - a) evaluated from a to x
= (b - a) * (x - a)
So, for a ≤ x ≤ b, the distribution function F(X) is given by F(X) = (b - a) * (x - a).
Learn more about distribution function here: brainly.com/question/31886881
#SPJ11
The difference quotient for a function f(x) is given by f(x+h)-f(x)/h. Find the difference h quotient for f(x) = 2x² - 4x + 5. Simplify your answer. Show your work.
The difference quotient for the function f(x) is given by f(x+h)-f(x)/h. We are required to find the difference quotient for f(x) = 2x² - 4x + 5.
Let's find the difference quotient by substituting the given values into the formula:difference quotient = f(x + h) - f(x) / hdifference quotient = [2(x + h)² - 4(x + h) + 5] - [2x² - 4x + 5] / hdifference quotient = [2(x² + 2xh + h²) - 4x - 4h + 5] - [2x² - 4x + 5] / hdifference quotient = [2x² + 4xh + 2h² - 4x - 4h + 5 - 2x² + 4x - 5] / hdifference quotient = [4xh + 2h² - 4h] / hdifference quotient = 2x + 2h - 2 Simplifying the expression, we get the difference quotient as 2x - 2 + 2h. Therefore, the difference quotient for f(x) = 2x² - 4x + 5 is 2x - 2 + 2h.A difference quotient is a method of calculating the derivative of a function.
The difference quotient formula is [f(x + h) - f(x)] / h, where h is the change in x and f(x + h) - f(x) is the change in y.
To know more about division method visit:
https://brainly.com/question/32561041
#SPJ11
The given function is f(x) = 2x² - 4x + 5. To find the difference quotient, we will use the formula as given:Difference quotient= [f(x+h)-f(x)]/h Now, substitute the values in the above formula:
[tex]f(x) = 2x² - 4x + 5f(x+h) = 2(x+h)² - 4(x+h) + 5= 2(x²+2xh+h²) - 4x - 4h + 5[As x²[/tex] remains x²,
but the other terms contain x and h]Therefore,
Difference quotient
[tex]= [f(x+h)-f(x)]/h= [2(x²+2xh+h²) - 4x - 4h + 5 - (2x² - 4x + 5)]/h= [2x² + 4xh + 2h² - 4x - 4h + 5 - 2x² + 4x - 5]/h= [4xh + 2h² - 4h]/h= 2x + 2h - 4[/tex]
Thus, the difference quotient for f(x) = 2x² - 4x + 5 is 2x + 2h - 4, and this is the simplified answer.In more than 100 words:
Difference quotient is used in calculus to describe how a function changes as it is evaluated over two points. Given a function, f(x), the difference quotient can be found by using the formula (f(x+h) - f(x))/h.
This gives us
[tex]f(x+h) = 2(x²+2xh+h²) - 4(x+h) + 5 andf(x) = 2x² - 4x + 5.[/tex]
Then, we simplify the formula by expanding and combining like terms.
This gives us the difference quotient 2x + 2h - 4.
To know more about quotient visit:
https://brainly.com/question/16134410
#SPJ11
.Verify the identity. 1-4 sin² x/ 1+ 2 sin x = 1-2 sn x. A) 1 - 4 sin² x/ 1 + 2 sin x = (2+ sin x) (2 - sin x)/ 1 + 2 sin x B) 1-4 sin² x/ (1 + 2 sin x)(1- 2 sin x) 1 + 2 sin x = 1-2 sin x C) A) 1 - 4 sin² x/ 1 + 2 sin x = (2- sin x) (2 - sin x)/ 1 + 2 sin x = 1-2 sin x
Given : 1 - 4\sin^2x / (1 + 2\sin x) = 1 - 2\sin x
We need to verify the given identity.
Converting the denominator into required form
= 1 - 4\sin^2x / (1 + 2\sin x) × {(1 - 2\sin x)}/{(1 - 2\sin x)}
= (1 - 4\sin^2x) (1 - 2\sin x) / (1 - 4\sin^2x)
Multiplying through, we get;
=1 - 2\sin x - 4\sin^2x + 8\sin^3x
= 1 - 2\sin x - 4\sin^2x + 4\cdot 2\sin^3x
= 1 - 2\sin x - 4\sin^2x + 8\sin^3x
= 1 - 2\sin x (1 + 2\sin x)
Now, we can easily check that;
1 - 2\sin x (1 + 2\sin x) = 1 - 2\sin x
Therefore, we can conclude that the answer is:
Option D: 1 - 4 sin² x/ (1 + 2 sin x) = 1 - 2 sin x.
Hence, we have verified the given identity.
To know more about sin x visit:
brainly.com/question/32560837
#SPJ11
Crème Anglaise x 25 Item Quantity Unit Unit 300 portions $ Amount size Price eggyolk 12 (240 ml) doz $ 2.65 25 doz sugar 250 g kg $0.99 6.25 kg 12.5 kg cream 2 Itr/g Itr(kg) $ 6.25 milk 1/2 ltr/g Itr(kg) $ 1.25 12.5 kg vanilla 15 ml/g 500g $ 7.- 375 g Portions 300 120 g Portion weight Total recipe cost $ = =
The given recipe shows the quantity of each ingredient required to make 300 portions of Crème Anglaise.
The total recipe cost can be calculated by multiplying the quantity of each ingredient by its price and then adding up all the costs.
Let's calculate the total recipe cost using the given information:
Item Quantity Unit [tex]Unit 300 portions $[/tex] Amount size Price [tex]eggyolk 12 (240 ml) doz $2.65 25 doz[/tex]
[tex]sugar 250 g kg $0.99 6.25 kg 12.5 kg[/tex]
[tex]cream 2 Itr/g Itr(kg) $6.25[/tex]
[tex]milk 1/2 ltr/g Itr(kg) $1.25 12.5 kg[/tex]
[tex]vanilla 15 ml/g 500g $7.- 375 g[/tex]
Now, let's calculate the cost of each ingredient.
[tex]Cost of egg yolk = 25 dozen x 12 = 300[/tex]
[tex]eggs = 300/12 = 25 units25 units x $2.65 per unit = $66.25[/tex]
[tex]Cost of sugar = 6.25 kg x $0.99 per kg = $6.19[/tex]
[tex]Cost of cream = 2 kg x $6.25 per kg = $12.50[/tex]
[tex]Cost of milk = 12.5 kg x $1.25 per kg = $15.63[/tex]
[tex]Cost of vanilla = 375 g x $7 per 500 g = $2.63[/tex]
The total recipe cost = [tex]$66.25 + $6.19 + $12.50 + $15.63 + $2.63 = $103.20[/tex]
Therefore, the total recipe cost for making 300 portions of Crème Anglaise is [tex]$103.20.[/tex]
To know more about ingredient visit:
https://brainly.com/question/26532763
#SPJ11
Two different analytical tests can be used to determine the impurity level in steel alloys. Eight specimens are tested using both procedures, and the results are shown in the following tabulation. Is there sufficient evidence to conclude that both tests give the same mean impurity level, using alpha = 0.01? there sufficient evidence to conclude that both tests give the same mean impurity level since the test statistic in the rejection region. Round numeric answer to 2 decimal places. the tolerance is +/-2%
Based on the given data and using a significance level of 0.01, there is sufficient evidence to conclude that both tests do not give the same mean impurity level in steel alloys. The test statistic falls in the rejection region, indicating a significant difference between the means.
To determine if both tests give the same mean impurity level, we can conduct a hypothesis test. The null hypothesis, denoted as H0, assumes that the mean impurity levels from both tests are equal, while the alternative hypothesis, denoted as H1, assumes that the mean impurity levels are not equal.
Using the given data, we calculate the test statistic, which measures the difference between the sample means of the two tests. Since the population standard deviation is unknown, we use a t-distribution and the appropriate degrees of freedom to calculate the critical value.
By comparing the test statistic to the critical value at a significance level of 0.01, we can determine whether to reject or fail to reject the null hypothesis. If the test statistic falls in the rejection region, which is determined by the critical value, we reject the null hypothesis in favor of the alternative hypothesis, indicating a significant difference between the means.
In this case, since the test statistic falls in the rejection region, we have sufficient evidence to conclude that both tests do not give the same mean impurity level in steel alloys at a significance level of 0.01.
learn more about analytics here:brainly.com/question/30101345
#SPJ11
Must show all Excel work
5. Consider these three projects: Project A Project B Project C Investment at n=0: $950,000 Investment at n=0: Investment at n=0: $970,000 $878,000 Cash Flow n = 1 $430,250 $380,000 $410,000 n = 2 $28
We have three projects (A, B, and C) with different initial investments and cash flows over two periods. Project A requires an initial investment of $950,000 and generates cash flows of $430,250 in year 1 and $28 in year 2.
Project B has an initial investment of $970,000 and cash flows of $380,000 in year 1 and $0 in year 2. Project C requires an investment of $878,000 and generates cash flows of $410,000 in year 1 and $0 in year 2. We need to determine the net present value (NPV) and profitability index (PI) for each project to assess their financial viability.
To calculate the NPV and PI for each project, we will discount the cash flows at the required rate of return or discount rate. Let's assume a discount rate of 10%.
In Excel, create a table with the following columns: Project, Initial Investment, Cash Flow Year 1, Cash Flow Year 2, Discounted Cash Flow Year 1, Discounted Cash Flow Year 2, NPV, and PI.
In the Project column, enter A, B, and C respectively. Fill in the corresponding initial investment and cash flows for each project.
In the Discounted Cash Flow Year 1 column, apply the formula "=Cash Flow Year 1 / (1 + Discount Rate)^1" for each project. Similarly, calculate the discounted cash flows for year 2 using the formula "=Cash Flow Year 2 / (1 + Discount Rate)^2".
In the NPV column, calculate the net present value for each project by subtracting the initial investment from the sum of discounted cash flows. Use the formula "=SUM(Discounted Cash Flow Year 1:Discounted Cash Flow Year 2) - Initial Investment".
Finally, calculate the profitability index (PI) for each project in the PI column. Use the formula "=NPV / Initial Investment".
By evaluating the NPV and PI values, we can assess the financial attractiveness of each project. Positive NPV and PI values indicate a favorable investment, while negative values suggest the project may not be viable. Compare the results for each project to make an informed decision based on their financial performance.
Learn more about profitability index here: brainly.com/question/30641835
#SPJ11
COMPLETE QUESTION :
In Excel, Consider These Three Projects: Project A Project B Project C Investment At N=0: $950,000 Investment At N=0: $878,000 Investment At N=0: $970,000 Cash Flow N = 1 $430,250
In Excel, Consider these three projects:
Project A Project B Project C
Investment at n=0: $950,000 Investment at n=0: $878,000 Investment at n=0: $970,000
Cash Flow
n = 1 $430,250 $380,000 $410,000
n = 2 $287,500 $485,000 $250,500
n = 3 $455,500 $350,750 $365,000
n = 4 $445,000 $235,000 $280,750
n = 5 $367,000 $330,000 $313,500
Calculate the profitability index for Projects A, B, and C at an interest rate of 9%.
point(s) possible The vector v has initial point P and terminal point Q. Write v in the form ai + bj+ck. That is, find its position vector. P= (1, -2,-5); Q=(4,-4,1) v=ai + bj+ck where a= -0, b= =. an
The position vector v is v = 3i - 2j + 6k.
To find the position vector v, we subtract the coordinates of the initial point P from the coordinates of the terminal point Q.
The components of vector v are given by:
v = Q - P
= (4, -4, 1) - (1, -2, -5)
= (4 - 1, -4 - (-2), 1 - (-5))
= (3, -2, 6)
Therefore, the position vector v is v = 3i - 2j + 6k.
To know more about vectors, visit:
https://brainly.com/question/31829483
#SPJ11
"Does anyone know the Correct answers to this problem??
Question 2 A population has parameters = 128.6 and a = 70.6. You intend to draw a random sample of size n = 222. What is the mean of the distribution of sample means? HE What is the standard deviation of the distribution of sample means? (Report answer accurate to 2 decimal places.) 07 =
The mean of the distribution of sample means (μ2) can be calculated using the formula: μ2 = μ. The standard deviation can be calculated using the formula: λ2 = σ / √n,
The mean of the distribution of sample means (μ2) is equal to the population mean (μ). Therefore, μ2 = μ = 128.6.
The standard deviation of the distribution of sample means (λ2) can be calculated using the formula λ2 = σ / √n. In this case, σ = 70.6 and n = 222. Plugging in these values, we get:
λ2 = 70.6 / √222 ≈ 4.75 (rounded to 2 decimal places).
So, the mean of the distribution of sample means (μ2) is 128.6 and the standard deviation of the distribution of sample means (λ2) is approximately 4.75. These values indicate the center and spread, respectively, of the distribution of sample means when drawing samples of size 222 from the given population.
Learn more about standard deviation here:
https://brainly.com/question/13498201
#SPJ11
Complete the statements with quantifiers: a) _x (x²=4) b) _y (y² ≤0)
Quantifiers are mathematical symbols that describe the degree of truth in a statement. To complete the given statement with quantifiers, the possible answer for (a) is “∃x” and for (b) is “∀y.”
Step by step answer:
Quantifiers are logical symbols that are used in predicate logic to indicate the amount or degree of truthfulness in a statement. The two main types of quantifiers are universal quantifiers and existential quantifiers. Universal quantifiers (∀) are used to say that a statement is true for all elements in a given domain. For instance, in the statement ∀x (x² > 0), the quantifier ∀x means that "for all x" and the statement x² > 0 is true for every value of x. Existential quantifiers ([tex]∃[/tex]) are used to indicate that a statement is true for at least one element in a given domain. For example, in the statement [tex]∃x (x² = 4)[/tex], the quantifier ∃x means "there exists an x" such that x² = 4.
To know more about quantifiers visit :
https://brainly.com/question/32664558
#SPJ11
random sample 7 fields of corn has a mean yield of 31.0 bushels per acre and standard deviation of 7.05 bushels per acre. Determine t 0% confidence interval for the true mean yield. Assume the population is approximately normal. Step 1 of 2: Find the critical value that should be used in constructing the confidence interval. Round your answer to three decimal places. answerHow to enter your answer (opens in new window) 2 Points Keyboard A random sample of 7 fields of corn has a mean yield of 31.0 bushels per acre and standard deviation of 7.05 bushels per acre. Determine the 90% confidence interval for the true mean yield. Assume the population is approximately normal. Step 2 of 2: Construct the 90 % confidence interval. Round your answer to one decimal place. p Answer How to enter your answer (opens in new window)
The 90% confidence interval for the true mean yield is given as follows:
(25.8 bushes per acre, 36.2 bushels per acre).
What is a t-distribution confidence interval?The t-distribution is used when the standard deviation for the population is not known, and the bounds of the confidence interval are given according to the equation presented as follows:
[tex]\overline{x} \pm t\frac{s}{\sqrt{n}}[/tex]
The variables of the equation are listed as follows:
[tex]\overline{x}[/tex] is the sample mean.t is the critical value.n is the sample size.s is the standard deviation for the sample.The critical value, using a t-distribution calculator, for a two-tailed 90% confidence interval, with 7 - 1 = 6 df, is t = 1.9432.
The parameters for this problem are given as follows:
[tex]\overline{x} = 31, s = 7.05, n = 7[/tex]
The lower bound of the interval is given as follows:
[tex]31 - 1.9432 \times \frac{7.05}{\sqrt{7}} = 25.8[/tex]
The upper bound of the interval is given as follows:
[tex]31 + 1.9432 \times \frac{7.05}{\sqrt{7}} = 36.2[/tex]
More can be learned about the t-distribution at https://brainly.com/question/17469144
#SPJ4
A24.1 (5 marks) Suppose that y: R + R2 given by y(t) = [ x(t) y(t) ]
determines a curve in the plane that has unit speed, so || y(t)|| = 1 for all t € R. (i) State the conditions that r(t) and y(t) must satisfy when y has unit speed, and deduce that "(t) is perpendicular to (t).
(ii) Show that there exists k(t) € R such that
[x''(t) y''(t)] = k(t) [-y'(t) x'(t)]
[x''(t) y''(t)] is proportional to [-y'(t) x'(t)] and the constant of proportionality is given by k(t).
(i) Given information:y(t) = [ x(t) y(t) ]determines a curve in the plane that has unit speed, so || y(t)|| = 1 for all t ∈ R.
.(1)Differentiating again with respect to t, we obtain
[tex]dx²(t)/dt² (x(t)) + dx(t)/dt (dx(t)/dt) + dy²(t)/dt² (y(t)) + dy(t)/dt (dy(t)/dt) = 0[/tex]......
(2)From the above equations, we obtain
[tex]x(t)dx²(t)/dt² + y(t)dy²(t)/dt² = 0....[/tex]
(3)And also, using equation (1), we have
[tex]x(t)dy(t)/dt - y(t)dx(t)/dt = 0....[/tex].
.(4)Differentiating equation (4) with respect to t, we get
[tex]dx(t)/dt (dy(t)/dt) + x(t)d²y(t)/dt² - dy(t)/dt (dx(t)/dt) - y(t)d²x(t)/dt² = 0[/tex]
Rearranging terms and using equations (3) and (4), we get
d²x(t)/dt² + d²y(t)/dt² = 0
Thus, "(t) is perpendicular to (t).
(ii) Let P(t) = [ x(t) y(t) ].
We are to show that there exists k(t) € R such that
[x''(t) y''(t)] = k(t) [-y'(t) x'(t)
]Differentiating equation (3) with respect to t twice, we have
d³x(t)/dt³ + d³y(t)/dt³ = 0
Using the fact that ||y(t)|| = 1,
it follows that P(t) is a curve of unit speed. So, ||P'(t)|| = ||[x'(t) y'(t)]|| = 1
Differentiating again, we have P''(t) = [x''(t) y''(t)] + k(t) [-y'(t) x'(t)] where k(t) € R.
The reason being that -[y'(t) x'(t)] is the unit tangent vector that is perpendicular to [x'(t) y'(t)]. Hence, [x''(t) y''(t)] is proportional to [-y'(t) x'(t)] and the constant of proportionality is given by k(t).
To learn more about proportional visit;
https://brainly.com/question/31548894
#SPJ11
The mean score of the students from training centers for a particular competitive examination is 148, with a standard deviation of 24. Assuming that the means can be measured to any degree of acc
Assuming that the means can be measured to any degree of accuracy, we can conclude that the mean score of the students from training centers for the particular competitive examination is 148. This value represents the central tendency or average score of the students.
The standard deviation of 24 indicates the variability or spread of the scores around the mean. A larger standard deviation suggests a wider range of scores, while a smaller standard deviation indicates less variability. However, without further information or context, it is challenging to make any specific conclusions or interpretations about the scores. Additional statistical analyses, such as hypothesis testing or comparing the scores to a reference group, would provide more insights into the performance of the students from the training centers. Assuming that the means can be measured to any degree of accuracy, we can conclude that the mean score of the students from training centers for the particular competitive examination is 148. This value represents the central tendency or average score of the students. The standard deviation of 24 indicates the variability or spread of the scores around the mean. A larger standard deviation suggests a wider range of scores, while a smaller standard deviation indicates less variability. However, without further information or context, it is challenging to make any specific conclusions or interpretations about the scores. Additional statistical analyses, such as hypothesis testing or comparing the scores to a reference group, would provide more insights into the performance of the students from the training centers.
Learn more about statistical analyses here: brainly.com/question/30212318
#SPJ11
Using the Laplace transform method, solve for t20 the following differential equation: dx +5a- +68x= = 0, dt dt² subject to 2(0) = 2o and (0) = o- In the given ODE, a and 3 are scalar coefficients. Also, ao and to are values of the initial conditions. Moreover, it is known that r(t) = 2e-1/2(cos(t)- 24 sin(t)) is a solution of ODE + a + 3a = 0.
The differential equation using the Laplace transform method, specific values for the coefficients a, 3, ao, and to are required. Without these values, it is not possible to provide a solution for t = 20 using the Laplace transform method.
To solve the given differential equation using the Laplace transform method, we can follow these steps:
Take the Laplace transform of both sides of the differential equation:
Taking the Laplace transform of [tex]dx/dt[/tex], we get [tex]sX(s) - x(0)[/tex], and the Laplace transform of [tex]d^2x/dt^2[/tex] becomes [tex]s^2X(s) - sx(0) - x'(0)[/tex], where X(s) represents the Laplace transform of x(t).
Substitute the initial conditions into the Laplace transformed equation:
Using the given initial conditions, we have [tex]s^2X(s) - sx(0) - x'(0) + 5a(sX(s) - x(0)) + 68X(s) = 0[/tex].
Rearrange the equation to solve for X(s):
Combining like terms and rearranging, we obtain the equation [tex](s^2 + 5as + 68)X(s) = sx(0) + x'(0) + 5ax(0)[/tex].
Solve for X(s):
Divide both sides of the equation by [tex](s^2 + 5as + 68)[/tex] to isolate X(s). The resulting expression for X(s) represents the Laplace transform of x(t).
Find the inverse Laplace transform of X(s):
To obtain the solution x(t), we need to find the inverse Laplace transform of X(s). This step may involve partial fraction decomposition if the denominator of X(s) has distinct roots.
Unfortunately, the values for a, 3, ao, and to are not provided. Without these specific values, it is not possible to proceed with the calculations and find the solution x(t) or t20 (the value of x(t) at t = 20).
To learn more about differential equation click here
brainly.com/question/32524608
#SPJ11
Suppose $v_1, v_2, v_3$ is an orthogonal set of vectors in $\mathbb{R}^5$ with $v_1 \cdot v_1=9, v_2 \cdot v_2=38.25, v_3 \cdot v_3=16$.
Let $w$ be a vector in $\operatorname{Span}\left(v_1, v_2, v_3\right)$ such that $w \cdot v_1=27, w \cdot v_2=267.75, w \cdot v_3=-32$.
Then $w=$ ______$v_1+$_______________ $v_2+$ ________$v_3$.
From the given question,$v_1 \cdot v_1=9$$v_2 \cdot v_2=38.25$$v_3 \cdot v_3=16$And, we have a vector $w$ such that $w \cdot v_1=27$, $w \cdot v_2=267.75$ and $w \cdot v_3=-32$.
Then we need to find the vector $w$ in terms of $v_1$, $v_2$ and $v_3$.
To find the vector $w$ in terms of $v_1$, $v_2$ and $v_3$, we use the following formula.
$$w = \frac{w \cdot v_1} {v_1 \cdot v_1} v_1 + \frac{w \cdot v_2}{v_2 \cdot v_2} v_2 + \frac{w \cdot v_3}{v_3 \cdot v_3} v_3$$
Substituting the given values, we get$$w = \frac{27}{9} v_1 + \frac{267.75}{38.25} v_2 - \frac{32}{16} v_3$$$$w = 3 v_1 + 7 v_2 - 2 v_3$$
Therefore, the vector $w$ can be written as $3v_1 + 7v_2 - 2v_3$.
Summary: Therefore, $w = 3 v_1 + 7 v_2 - 2 v_3$ is the required vector.
Learn more about vector click here:
https://brainly.com/question/25705666
#SPJ11
a. Under what conditions can you estimate the Binomial Distribution with the Normal Distribution? 5 marks b. What does it mean if two variables are independent? If X and Y are independent what would the value of their covariance be?
a. After normalizing the binomial distribution, the mean and standard deviation can be used to estimate probabilities using the approximate normal distribution.
b. X and Y being independent implies that E[XY] = E[X]E[Y], the covariance reduces to 0.
a. To estimate the Binomial Distribution with the Normal Distribution, the following conditions must be met:
The sample size must be large, typically 50 or more.
The probability of success should be close to 0.5, preferably between 0.4 and 0.6.
Both np (the expected number of successes) and n(1-p) (the expected number of failures) should be at least 10.
Once these conditions are satisfied, the standard deviation of the binomial distribution can be calculated using the formula σ = √(np(1-p)). After normalizing the binomial distribution, the mean and standard deviation can be used to estimate probabilities using the approximate normal distribution. This allows for the estimation of the probability of obtaining a specific number of successes.
b. Two variables are considered independent if the occurrence or value of one variable has no influence on the occurrence or value of the other variable. In other words, there is no relationship or association between the two variables.
Covariance is a measure of the linear relationship between two random variables. If X and Y are independent, the covariance between them would be 0.
This is because the covariance is calculated as the difference between the expected value of the product of X and Y (E[XY]) and the product of their individual expected values (E[X]E[Y]). Since X and Y being independent implies that E[XY] = E[X]E[Y], the covariance reduces to 0.
However, it's important to note that a covariance of 0 does not necessarily imply independence between X and Y. There can be cases where X and Y are dependent despite having a covariance of 0.
To learn more about distribution, refer below:
https://brainly.com/question/29664127
#SPJ11
The Binomial Distribution can be approximated by the Normal Distribution under the following conditions
(1) the number of trials is large, typically greater than or equal to 30; (2) the probability of success remains constant across all trials; and (3) the events are independent. When these conditions are met, the shape of the Binomial Distribution becomes approximately symmetrical, and the mean and standard deviation can be used to estimate the parameters of the Normal Distribution.
b. If two variables, X and Y, are independent, it means that the occurrence or value of one variable does not affect or provide any information about the occurrence or value of the other variable. In other words, there is no relationship or association between the two variables. In the case of independent variables, their covariance, denoted as Cov(X, Y), would be zero. Covariance measures the degree to which two variables vary together, and when variables are independent, their covariance is zero because there is no systematic relationship between them.
To learn more about Binomial Here :
brainly.com/question/30339327
#SPJ11
3. (10 points) Let π < θ < 3π/2 and sin θ = √3/4 Find sec θ.
if π < θ < 3π/2 and sin θ = √3/4, sec θ is equal to -2.
How do we calculate?sec θ is the inverse of cos θ
Applying the Pythagorean identity:
sin² θ + cos² θ = 1
sin θ = √3/4
(√3/4)² + cos² θ = 1
3/4 + cos² θ = 1
cos² θ = 1 - 3/4
cos² θ = 1/4
We take the square root of both sides and have:
cos θ = ±1/2
cos θ = -1/2 ( θ is in the second quadrant (π < θ < 3π/2), the value of cos θ will be negative)
sec θ = 1/cos θ
sec θ = 1/(-1/2)
sec θ = -2
In conclusion, sec θ is equal to -2.
Learn more about Pythagorean identity at:
https://brainly.com/question/24287773
#SPJ4
Find a vector normal n to the plane with the equation 3(x − 11) — 13(y − 6) + 3z = 0. (Use symbolic notation and fractions where needed. Give your answer in the form of a vector (*, *, *).)
To find a vector normal to the plane with the given equation, we can determine the coefficients of x, y, and z in the equation and use them as components of the normal vector. By comparing the coefficients with the standard form of a plane equation, we can find the vector normal to the plane.
The given equation of the plane is 3(x - 11) - 13(y - 6) + 3z = 0. By comparing this equation with the standard form of a plane equation, ax + by + cz = 0, we can determine the coefficients of x, y, and z in the equation. In this case, the coefficients are 3, -13, and 3 respectively.
Using these coefficients as the components of the normal vector, we obtain the vector n = (3, -13, 3). Therefore, the vector normal to the plane with the equation 3(x - 11) - 13(y - 6) + 3z = 0 is (3, -13, 3).
To learn more about standard form, click here:
brainly.com/question/17264364
#SPJ11
Calculate the following multiplication and simplify your answer as much as possible. How many monomials does your final answer have? (x − y) (x² + xy + y³) a.2 b.1 c. 4 d. 6 e.3 f. 5
The multiplication [tex](x-y)(x^2 + xy + y^3)[/tex] results in the expression[tex]x^3 - xy^4 - y^3[/tex]. This expression has [tex]3[/tex] monomials, which are [tex]x^3, -xy^4[/tex], and [tex]-y^3[/tex]. Thus, the correct answer is e) [tex]3[/tex]
The multiplication of [tex](x-y)(x^2 + xy + y^3)[/tex] can be evaluated by using the distributive property.
So, the distributive property is given as follows:
[tex]x(x^2+ xy + y^3) - y(x^2 + xy + y^3)[/tex].
Now multiply each term of the first expression with the second expression.
Then we have:
[tex]x(x^2) + x(xy) + x(y^3) - y(x^2) - y(xy) - y(y^3)[/tex].
After multiplying, we will get the expression as given below:
[tex]x^3 + x^2y + xy^3 - x^2y - xy^4 - y^3[/tex].
Simplifying this expression gives the result as [tex]x^3 - xy^4 - y^3[/tex]
This expression contains three monomials. A monomial is a single term consisting of the product of powers of variables. Thus, the correct option is e) [tex]3[/tex]
Learn more about distributive property here:
https://brainly.com/question/30828647
#SPJ11
Homework: HW5_LinearAlgebra 3 - 9 Let A = Construct a 2 x 2 matrix B such that AB is the zero matrix. Use two different nonzero columns for B. -5 15 B= Question 1, 2.1.12 > HW Score: 65%, 65 of 100 po
The matrix B is [tex]\left[\begin{array}{cc}3&-9\\-5&15\end{array}\right][/tex].
To construct a 2x2 matrix B such that AB is the zero matrix, we need to find two nonzero columns for B such that when multiplied by matrix A, the resulting product is the zero matrix.
Let's denote the columns of matrix B as b1 and b2. We can choose the columns of B to be multiples of each other to ensure that their product with matrix A is the zero matrix.
One possible choice for B is:
B = [tex]\left[\begin{array}{cc}3&-9\\-5&15\end{array}\right][/tex]
In this case, both columns of B are multiples of each other, with the first column being -3 times the second column. When we multiply matrix A with B, we get:
AB = [tex]\left[\begin{array}{cc}3&-9\\-5&15\end{array}\right][/tex] x [tex]\left[\begin{array}{cc}3&-9\\-15&45\end{array}\right][/tex]
Simplifying further:
AB = [tex]\left[\begin{array}{cc}0&0\\0&0\end{array}\right][/tex]
As we can see, the product of matrix A with B is the zero matrix, satisfying the condition.
Correct Question :
Let A=[3 -9
-5 15]. Construct a 2x2 Matrix B Such That AB Is The Zero Matrix. Use Two Different Nonzero Columns For B.
To learn more about matrix here:
https://brainly.com/question/28180105
#SPJ4
14. The Riverwood Paneling Company makes two kinds of wood paneling, Colonial and Western. The company has developed the following nonlinear programming model to determine the optimal number of sheets of Colonial paneling (x) and Western paneling (x) to produce to maximize profit, subject to a labor constraint
maximize Z = $25x(1,2) - 0.8(1,2) + 30x2 - 1.2x(2,2) subject to
x1 + 2x2 = 40 hr.
Determine the optimal solution to this nonlinear programming model using the method of Lagrange multipliers
15. Interpret the mening of λ,the Lagrange maltiplies in Problem 14.
The Riverwood Paneling Company has a nonlinear programming model to maximize profit by determining the optimal number of Colonial and Western paneling sheets to produce, subject to a labor constraint. The method of Lagrange multipliers is used to find the optimal solution.
The given nonlinear programming model aims to maximize the profit function Z, which is defined as $25x1 + 30x2 - 0.8x1² - 1.2x2². The decision variables x1 and x2 represent the number of sheets of Colonial and Western paneling to produce, respectively. The objective is to maximize profit while satisfying the labor constraint of x1 + 2x2 = 40 hours.
To solve this problem using the method of Lagrange multipliers, we introduce a Lagrange multiplier λ to incorporate the labor constraint into the objective function. The Lagrangian function L is defined as:
L(x1, x2, λ) = $25x1 + 30x2 - 0.8x1² - 1.2x2² + λ(x1 + 2x2 - 40)
By taking partial derivatives of L with respect to x1, x2, and λ, and setting them equal to zero, we can find the critical points of L. Solving these equations simultaneously provides the optimal values for x1, x2, and λ.
The Lagrange multiplier λ represents the rate of change of the objective function with respect to the labor constraint. In other words, it quantifies the marginal value of an additional hour of labor in terms of profit. The optimal solution occurs when λ is equal to the marginal value of an hour of labor. Therefore, λ helps determine the trade-off between increasing labor hours and maximizing profit.
Learn more about Lagrangian multiplier here: https://brainly.com/question/30776684
#SPJ11
the random variable x is known to be uniformly distributed between 70 and 90. the probability of x having a value between 80 to 95 is
Given, the random variable X is uniformly distributed between 70 and 90. The probability of X having a value between 80 to 95 is [tex]\frac{1}{2}[/tex] or 0.5
The probability density function of a uniformly distributed random variable X is given by:
f(x) = [tex]\frac{1}{(b-a)}[/tex]for a ≤ x ≤ b
where, a and b are the lower and upper bounds of the distribution.
Here, a = 70 and b = 90. Therefore, the probability density function of X is:
f(x) = [tex]\frac{1}{(90-70)}[/tex] = [tex]\frac{1}{20}[/tex] for 70 ≤ x ≤ 90
To find the probability of X having a value between 80 and 95, we need to integrate f(x) from 80 to 90.
The probability of X having a value between 80 to 95 is calculated by integrating the probability density function of X between the limits 80 and 95. The area under the probability density function between these limits gives the probability of X being between 80 and 95. The probability density function of a uniformly distributed random variable X is given by: f(x) = [tex]\frac{1}{(b-a)}[/tex] for a ≤ x ≤ b
where, a and b are the lower and upper bounds of the distribution. Here, a = 70 and b = 90. Therefore, the probability density function of X is:
f(x) = [tex]\frac{1}{(90-70)}[/tex] = [tex]\frac{1}{20}[/tex] for 70 ≤ x ≤ 90
To find the probability of X having a value between 80 and 95, we need to integrate f(x) from 80 to 90.
∫[80, 90] f(x) dx = ∫[80, 90] (1/20) dx
=[tex][\frac{x}{20}]80[/tex] to 90
= [tex]\frac{90}{20}[/tex] - [tex]\frac{80}{20}[/tex]
= [tex]\frac{1}{2}[/tex]
Therefore, the probability of X having a value between 80 to 95 is [tex]\frac{1}{2}[/tex] or 0.5.
Learn more about probability visit:
brainly.com/question/32678715
#SPJ11
In order to help identify baby growth patterns that are unusual, there is a need to construct a confidence interval estimate of the mean head circumference of all babies that are two months old. A random sample of 125 babies is obtained, and the mean head circumference is found to be 40.8 cm. Assuming that population standard deviation is known to be 1.7 cm, find 98% confidence interval estimate of the mean head circumference of all two month old babies (population mean μ).
To construct a confidence interval estimate of the mean head circumference of all two-month-old babies, we can use the following formula:
Confidence Interval = [tex]X \pm Z \left(\frac{\sigma}{\sqrt{n}}\right)[/tex]
Where:
X is the sample mean head circumference,
Z is the critical value corresponding to the desired level of confidence (98% in this case),
[tex]\sigma[/tex] is the population standard deviation,
n is the sample size.
Given:
Sample size (n) = 125
Sample mean (X) = 40.8 cm
Population standard deviation ([tex]\sigma[/tex]) = 1.7 cm
Desired confidence level = 98%
First, we need to find the critical value (Z) associated with the 98% confidence level. Since the standard normal distribution is symmetric, we can use the z-table or a calculator to find the z-value corresponding to the confidence level. For a 98% confidence level, the z-value is approximately 2.33.
Now we can substitute the values into the formula:
Confidence Interval = 40.8 cm [tex]\pm 2.33 \left(\frac{1.7 cm}{\sqrt{125}}\right)[/tex]
Calculating the expression inside the parentheses:
[tex]\frac{1.7 cm}{\sqrt{125}} \approx 0.152 cm[/tex]
Substituting the values:
Confidence Interval = 40.8 cm [tex]\pm 2.33 \cdot 0.152 cm[/tex]
Calculating the multiplication:
2.33 [tex]\cdot 0.152 \approx 0.354[/tex]
Finally, the confidence interval estimate is:
40.8 cm [tex]\pm 0.354 cm[/tex]
Thus, the 98% confidence interval estimate of the mean head circumference of all two-month-old babies (population mean μ) is approximately:
(40.446 cm, 41.154 cm)
To know more about mean visit-
brainly.com/question/13618914
#SPJ11
A researcher was interested in examining whether there was a relationship between college student status college student/non-college student) and voting behavior (vote/didn't vote). Two-hundred and twenty participants whose college student status was ascertained (120 college students and 100 non-students) were asked whether they voted in the last presidential election. The enrollment status and voting behavior of the two groups is presented in the table below
Here are the presented enrollment status and voting behavior of the two groups: College Student | Vote | Did not vote Yes | 80 | 40No | 40 | 60Non-Student | Vote | Did not vote Yes | 60 | 40No | 20 | 80The researcher was interested in examining whether there was a relationship between college student status (college student/non-college student) and voting behavior (vote/didn't vote).
Here, we are interested in examining whether there was a relationship between two categorical variables, namely college student status (college student/non-college student) and voting behavior (vote/didn't vote).Therefore, we need to perform a chi-square test for independence.
Here's how we can solve it :
Null hypothesis:
H0:
There is no significant association between college student status and voting behavior .
Level of significance:α = 0.05Critical value for the chi-square test:
With a degree of freedom (df) of (2 - 1)(2 - 1) = 1 and a level of significance of 0.05, the critical value for the chi-square test is 3.84 (from the chi-square distribution table).
Calculation :
We will use the formula for the chi-square test to calculate the test statistic: χ² = Σ[(O - E)²/E]
where ,O = Observed frequency E = Expected frequency
We can obtain the expected frequency for each cell by the following formula :
Expected frequency = (total of row × total of column) / grand total
So, the expected frequency for the first cell of the first row is:
(120 + 100) × (80 + 40) / 220= 76.36
College Student | Vote | Did not vote |
Total Yes | 76.36 | 43.64 | 120No | 43.64 | 76.36 | 100
Total | 120 | 120 | 240 Non-Student | Vote | Did not vote |
Total Yes | 57.27 | 42.73 | 100No | 22.73 | 17.27 | 40Total | 80 | 60 | 140
We can now substitute these values into the chi-square formula:
χ² = [(80 - 57.27)² / 57.27] + [(40 - 22.73)² / 22.73] + [(60 - 42.73)² / 42.73] + [(100 - 76.36)² / 76.36] + [(120 - 76.36)² / 76.36] + [(100 - 43.64)² / 43.64] + [(100 - 57.27)² / 57.27] + [(40 - 22.73)² / 22.73] + [(120 - 43.64)² / 43.64] + [(100 - 76.36)² / 76.36] + [(80 - 57.27)² / 57.27] + [(60 - 42.73)² / 42.73]= 16.82
To know more about enrollment visit :
brainly.com/question/21557093
#SPJ11
X is a discrete variable, the possible values and probability distribution are shown as below
Xi 0 1 2 3 4 5
P(Xi) 0.35 0.25 0.2 0.1 0.05 0.05
Please compute the standard deviation of X
To compute the standard deviation of a discrete random variable X, we need to follow these steps:
Step 1: Calculate the expected value (mean) of X.
The expected value of X, denoted as E(X), is calculated by multiplying each value of X by its corresponding probability and summing them up.
E(X) = Σ(Xi * P(Xi))
E(X) = (0 * 0.35) + (1 * 0.25) + (2 * 0.2) + (3 * 0.1) + (4 * 0.05) + (5 * 0.05)
E(X) = 0 + 0.25 + 0.4 + 0.3 + 0.2 + 0.25
E(X) = 1.45
Step 2: Calculate the variance of X.
The variance of X, denoted as Var(X), is calculated by subtracting the squared expected value from the expected value of the squared X values, weighted by their corresponding probabilities.
Var(X) = E(X^2) - [E(X)]^2
Var(X) = Σ(Xi^2 * P(Xi)) - [E(X)]^2
Var(X) = (0^2 * 0.35) + (1^2 * 0.25) + (2^2 * 0.2) + (3^2 * 0.1) + (4^2 * 0.05) + (5^2 * 0.05) - (1.45)^2
Var(X) = (0 * 0.35) + (1 * 0.25) + (4 * 0.2) + (9 * 0.1) + (16 * 0.05) + (25 * 0.05) - 2.1025
Var(X) = 0 + 0.25 + 0.8 + 0.9 + 0.8 + 1.25 - 2.1025
Var(X) = 2.25
Step 3: Calculate the standard deviation of X.
The standard deviation of X, denoted as σ(X), is the square root of the variance.
σ(X) = √Var(X)
σ(X) = √2.25
σ(X) = 1.5
Therefore, the standard deviation of X is 1.5.
To know more about deviation visit-
brainly.com/question/32394239
#SPJ11
A rectangular plut of land adjacent to a river is to be fenced. The cost of the fence. that faces the river is $9 per foot. The cost of the fence for the other sides is $6 per foot. If you have $1,458 how long should the side facing the river be so that the fenced area is maximum? (Round the answer to 2 decimal places, do NOT write the Units) CRUJET
The cost for the river-facing side is $9 per foot, while the cost for the other sides is $6 per foot. With a total budget of $1,458, we want to find the length of the river-facing side that will result in the maximum area.
To maximize the fenced area, we need to determine the length of the side facing the river that will give us the maximum area within the given budget. Let's denote the length of the river-facing side as x. The cost of the river-facing side will then be 9x, and the cost of the other sides will be 6(2x) = 12x. The total cost of the fence will be 9x + 12x = 21x.
Since we have a budget of $1,458, we can set up the equation:
21x = 1,458
Solving for x, we find x = 1,458 / 21 ≈ 69.43.
Therefore, the length of the side facing the river should be approximately 69.43 feet in order to maximize the fenced area within the given budget.
To learn more about area click here : brainly.com/question/30307509
#SPJ11
Hint: to prove it is coplanar we prove a . ( b x c ) = 0
7. Find the value(s) for m given â = (2,−5,1), b = (–1,4,-3) and c = (-2, m²,) are coplanar.
We have found the value of m that makes the given vectors coplanar by calculating the cross product and scalar product of the given vectors.
The given vectors â, b, and c are coplanar, and we have to find out the value of m.
We will use the fact to prove that a, b, and c are coplanar if
a . ( b x c ) = 0.
The given vectors are coplanar if m = -3.5.
:To check if a set of vectors is coplanar or not, we can follow two methods.
These are:
If vectors A, B, and C are coplanar, the scalar triple product [ABC] is equal to zero.
[ABC] = A.(BxC)
In this method, we use the determinant of a matrix, which is obtained by combining the given vectors in the columns or rows of a 3 x 3 matrix.
The determinant is zero if the vectors are coplanar or linearly dependent.
Otherwise, the determinant is non-zero. Hence, the vectors are coplanar if and only if the determinant is zero.
Summary: We have found the value of m that makes the given vectors coplanar by calculating the cross product and scalar product of the given vectors.
Learn more about vectors click here:
https://brainly.com/question/25705666
#SPJ11
Find two linearly independent solutions of y′′+1xy=0y″+1xy=0 of the form
y1=1+a3x3+a6x6+⋯y1=1+a3x3+a6x6+⋯
y2=x+b4x4+b7x7+⋯y2=x+b4x4+b7x7+⋯
Enter the first few coefficients:
a3=a3=
a6=a6=
b4=b4=
b7=b7=
The two linearly independent solutions are:
y1=1−x3/6+……
y1=1−x3/6+……
y2 = x−x7/5040+……
y2=x−x7/5040+……
The given differential equation is
y′′+1xy=0y″+1xy=0
We have to find two linearly independent solutions of the given differential equation of the form
y1=1+a3x3+a6x6+⋯
y1=1+a3x3+a6x6+⋯
y2=x+b4x4+b7x7+⋯
y2=x+b4x4+b7x7+⋯
Now,Let us substitute the value of y in differential equation.
We get
y′′=6a3x+42a6x5+……..
y′′=6a3x+42a6x5+……..
y′′+1xy= (6a3x+42a6x5+…….)+x(1+a3x3+a6x6+⋯)⋯…..
=x+a3x4+…...+6a3x2+42a6x7+…..
Since we want a solution to the given differential equation, we must equate the coefficient of like powers of x to zero.
6a3x+1+a3x4=0 and 42a6x5=0
⇒ a3=−1/6 and a6=0 and b4=0 and b7=−1/5040
Thus, the two linearly independent solutions are:
y1=1−x3/6+……
y1=1−x3/6+……
y2 = x−x7/5040+……
y2=x−x7/5040+……
Know more about the linearly independent
https://brainly.com/question/31328368
#SPJ11
A vector v has an initial point of (-7, 5) and a terminal point of (3, -2). Find the component form of vector v. Given u = 3i+ 4j, w=i+j, and v=3u- 4w, find v.
The component form of vector v is (10, -7).
To find the component form of vector v, we subtract the coordinates of its initial point from the coordinates of its terminal point.
Step 1: Find the horizontal component
To find the horizontal component, we subtract the x-coordinate of the initial point from the x-coordinate of the terminal point:
3 - (-7) = 10
Step 2: Find the vertical component
To find the vertical component, we subtract the y-coordinate of the initial point from the y-coordinate of the terminal point:
-2 - 5 = -7
Step 3: Write the component form
The component form of vector v is obtained by combining the horizontal and vertical components:
v = (10, -7)
Learn more about component form
brainly.com/question/29832588
#SPJ11
The following data represent the IQ score of 25 job applicants to a company. 81 84 91 83 85 90 93 81 92 86 84 90 101 89 87 94 88 90 88 91 89 95 91 96 97 a. Construct a Frequency distribution table. b. Construct Frequency polygon c. Construct a histogram d. Construct an Ogive
The given data set represents the IQ scores of 25 job applicants. To analyze the data, we can construct a frequency distribution table, a frequency polygon, a histogram, and an ogive.
a. Frequency Distribution Table:
To construct a frequency distribution table, we arrange the data in ascending order and count the frequency of each score.
IQ Score Frequency
81 2
83 1
84 2
85 1
86 1
87 1
88 2
89 2
90 3
91 3
92 1
93 1
94 1
95 1
96 1
97 1
101 1
b. Frequency Polygon:
A frequency polygon is a line graph that displays the frequencies of each score. We plot the IQ scores on the x-axis and the corresponding frequencies on the y-axis, connecting the points to form a polygon.
c. Histogram:
A histogram represents the distribution of scores using adjacent bars. The x-axis represents the IQ scores, divided into intervals or bins, and the y-axis represents the frequency of scores falling within each bin.
d. Ogive:
An ogive, also known as a cumulative frequency polygon, displays the cumulative frequencies of the scores. It shows how many scores are less than or equal to a certain value. We plot the IQ scores on the x-axis and the cumulative frequencies on the y-axis, connecting the points to form a polygon.
By constructing these visual representations (frequency distribution table, frequency polygon, histogram, and ogive), we can effectively analyze and interpret the IQ scores of the job applicants.
Learn more about histogram here:
https://brainly.com/question/30354484
#SPJ11
Determine the mean and variance of the random variable with the following probability mass function. f(x)-(8 / 7)(1/ 2)×, x-1,2,3 Round your answers to three decimal places (e.g. 98.765) Mean Variance the tolerance is +/-290
The mean and variance of the random variable X are 12/7 and 56/2401 respectively, rounded to three decimal places.
Given the probability mass function: f(x) = (8/7)(1/2) * x,
x = 1,2,3.
The formula for the mean or expected value of a discrete random variable is:μ = Σ[x * f(x)], for all values of x.Here, x can take the values 1, 2, and 3.
Let us calculate the expected value of X or the mean (μ):
μ = Σ[x * f(x)] = 1 * (8/7)(1/2) + 2 * (8/7)(1/2) + 3 * (8/7)(1/2)
= 24/14
= 12/7
So, the mean of the random variable X is 12/7.
To find the variance of X, we first need to calculate the squared deviation of X about its mean: (X - μ)².For X = 1, the deviation is (1 - 12/7) = -5/7
For X = 2, the deviation is (2 - 12/7) = 3/7
For X = 3, the deviation is (3 - 12/7) = 9/7
So, the squared deviations are: (5/7)², (3/7)², and (9/7)².
Using the formula for the variance of a discrete random variable,
Var(X) = Σ[(X - μ)² * f(X)], for all values of X. We have,
Var(X) = [(5/7)² * (8/7)(1/2)] + [(3/7)² * (8/7)(1/2)] + [(9/7)² * (8/7)(1/2)] - [(12/7)²]
Var(X) = (200/343) - (144/49)
= 56/2401
Therefore, the variance of the random variable X is 56/2401.
Know more about the discrete random variable
https://brainly.com/question/17217746
#SPJ11