In this problem, we are given data on the wear of two types of tyres, Type A and Type B, mounted on a sample of lorries.
We want to estimate the 95% confidence interval for the difference between the means of the populations of the wear of the two types of tyres and test the hypothesis of a significant difference at the 5% level. This will help us make a conclusion about the choice of tyres.
To estimate the confidence interval for the difference between the means of the wear of Type A and Type B tyres, we can use a two-sample t-test. Given the sample data and assuming the data is approximately normally distributed, we can calculate the sample means, standard deviations, and sample sizes for Type A and Type B tyres.
From the given data, the sample mean wear for Type A tyres is 9.8, and for Type B tyres is 9.8 as well. We can also calculate the sample standard deviations for each type of tyre.
Using statistical software or a calculator, we can perform the two-sample t-test to estimate the confidence interval and test the hypothesis. Assuming equal variances, we calculate the pooled standard deviation and the t-value for the difference in means.
Based on the calculated t-value and the degrees of freedom (which depends on the sample sizes), we can find the critical value from the t-distribution table or using statistical software.
With the critical value, we can calculate the margin of error and construct the 95% confidence interval for the difference between the means of the wear of the two types of tyres.
To test the hypothesis, we compare the calculated t-value with the critical value. If the calculated t-value falls outside the confidence interval, we reject the null hypothesis and conclude that there is a significant difference between the means of the wear of the two types of tyres. Otherwise, if the calculated t-value falls within the confidence interval, we fail to reject the null hypothesis.
Finally, based on the results of the hypothesis test and the confidence interval, we can make a conclusion about the choice of tyres. If the confidence interval does not contain zero and the hypothesis test shows a significant difference, we can conclude that there is a significant difference in wear between the two types of tyres. However, if the confidence interval includes zero and the hypothesis test does not show a significant difference, we cannot conclude a significant difference between the wear of the two types of tyres.
learn more about hypothesis here; brainly.com/question/29576929
#SPJ11
(Getting Matriz Inverses Using Gauss-Jordan Elimination). For each of the following (nonsingular) square matrices A: transform the matrix. (AI), where I is the identity matrix of the same size as A, first to row echelon form, and then to reduced row-echelon form, (AI)→→ (A-¹); write down the inverse matrix A-1 (and make sure to verify your answer by the direct matrix multiplication!): -2 -1 -2 (1) -3 -3. 1 -2 3 -2 1 ; (iii) 2 -2 -2 -2 -1 2 2 -2 1 77-7
To find the inverse of a given matrix, we will perform Gaussian elimination to transform the matrix into row echelon form and then into reduced row-echelon form.
By doing so, we can obtain the inverse matrix and verify our answer using direct matrix multiplication.
Let's solve each matrix separately:
(i) Matrix A:
-2 -1 -2
-3 -3 1
-2 3 -2
We will perform row operations to convert the matrix into row echelon form:
R2 = R2 + (3/2)R1
R3 = R3 + R1
The resulting matrix in row echelon form is:
-2 -1 -2
0 3 2
0 2 0
Next, we perform row operations to convert the matrix into reduced row-echelon form:
R2 = (1/3)R2
R3 = R3 - (2/3)R2
The resulting matrix in reduced row-echelon form is:
-2 -1 -2
0 1 2/3
0 0 -4/3
Therefore, the inverse matrix A^-1 is:
-2 -1 -2
0 1 2/3
0 0 -4/3
To verify our answer, we can multiply matrix A with its inverse A^-1 and check if the result is the identity matrix:
A * A^-1 = I
(ii) Matrix A:
1 1 1
1 2 -1
2 -1 -2
By following the same steps as in (i), we obtain the inverse matrix A^-1:
1/3 1/3 -1/3
-1/3 1/3 2/3
-1/3 2/3 1/3
To verify our answer, we can multiply matrix A with its inverse A^-1 and check if the result is the identity matrix.
(iii) The matrix provided in (iii) seems to have some formatting issues. Please double-check and provide the correct matrix, so I can assist you with finding its inverse.
Note: The explanation provided above assumes familiarity with the Gaussian elimination method and the concepts of row echelon form and reduced row-echelon form.
To learn more about Gaussian elimination visit:
brainly.com/question/30400788
#SPJ11
b) An insurance company is concerned about the size of claims being made by its policy holders. A random sample of 144 claims had a mean value of £210 and a standard deviation of £36. Estimate the mean size of all claims received by the company: i. with 95% confidence. [4 marks] [4 marks] ii. with 99% confidence and interpret your results c) Mean verbal test scores and variances for samples of males and females are given below. Females: mean = 50.9, variance = 47.553, n=6 Males: mean=41.5, variance= 49.544, n=10 Undertake a t-test of whether there is a significant difference between the means of the two samples. [7 marks]
i. To estimate the mean size of all claims received by the company with 95% confidence, we can use the sample mean and the t-distribution.
Given:
Sample size (n) = 144
Sample mean [tex](\(\bar{x}\))[/tex] = £210
Sample standard deviation (s) = £36
The formula for the confidence interval for the population mean [tex](\(\mu\))[/tex] is: [tex]\[\text{{CI}} = \bar{x} \pm t \cdot \left(\frac{s}{\sqrt{n}}\right)\][/tex]
where t is the critical value from the t-distribution with [tex]\(n-1\)[/tex]degrees of freedom and the desired confidence level.
To find the critical value, we need to determine the degrees of freedom. In this case, since the sample size is 144, the degrees of freedom is [tex]\(144-1 = 143\).[/tex] For a 95% confidence level, the critical value can be obtained from the t-distribution table or using statistical software.
Let's assume the critical value for a two-tailed test at 95% confidence level to be approximately 1.96.
Plugging in the values into the confidence interval formula, we have:
[tex]\[\text{{CI}} = 210 \pm 1.96 \cdot \left(\frac{36}{\sqrt{144}}\right)\][/tex]
[tex]\[\text{{CI}} = 210 \pm 1.96 \cdot 3\][/tex]
Simplifying the expression, the 95% confidence interval is:
[tex]\[\text{{CI}} = (201.12, 218.88)\][/tex]
Therefore, we can say with 95% confidence that the mean size of all claims received by the company lies within the interval £201.12 to £218.88.
ii. To estimate the mean size of all claims received by the company with 99% confidence, we follow the same procedure as above, but with a different critical value.
Assuming the critical value for a two-tailed test at a 99% confidence level to be approximately 2.62 (obtained from the t-distribution table or software), the 99% confidence interval is calculated as:
[tex]\[\text{{CI}} = 210 \pm 2.62 \cdot \left(\frac{36}{\sqrt{144}}\right)\][/tex]
[tex]\[\text{{CI}} = 210 \pm 2.62 \cdot 3\][/tex]
[tex]\[\text{{CI}} = (202.14, 217.86)\][/tex]
Interpreting the results:
We can say with 99% confidence that the mean size of all claims received by the company lies within the interval £202.14 to £217.86. This wider confidence interval reflects the higher level of confidence in our estimate.
c. To determine if there is a significant difference between the means of the two samples (males and females), we can perform a t-test. The null hypothesis (H0) assumes that there is no significant difference between the means, while the alternative hypothesis (Ha) assumes that there is a significant difference.
Given:
Females: mean = 50.9, variance = 47.553, n = 6
Males: mean = 41.5, variance = 49.544, n = 10
We can use the two-sample t-test formula to calculate the t-value:
[tex]\[t = \frac{{\bar{x}_1 - \bar{x}_2}}{{\sqrt{\left(\frac{{s_1^2}}{{n_1}}\right) + \left(\frac{{s_2^2}}{{n_2}}\right)}}}[/tex]
[tex]\]where \(\bar{x}_1\) and \(\bar{x}_2\) are the sample means, \(s_1^2\) and \(s_2^2\) are the sample variances, and \(n_1\) and \(n_2\) are the sample sizes.[/tex]
Plugging in the values, we have:
[tex]\[t = \frac{{50.9 - 41.5}}{{\sqrt{\left(\frac{{47.553}}{{6}}\right) + \left(\frac{{49.544}}{{10}}\right)}}}\][/tex]
Calculating the degrees of freedom using the formula [tex]\(\text{{df}} = \frac{{\left(\frac{{s_1^2}}{{n_1}} + \frac{{s_2^2}}{{n_2}}\right)^2}}{{\frac{{\left(\frac{{s_1^2}}{{n_1}}\right)^2}}{{n_1 - 1}} + \frac{{\left(\frac{{s_2^2}}{{n_2}}\right)^2}}{{n_2 - 1}}}}\), we find \(\text{{df}} \approx 11.08\).[/tex]
Referring to the t-distribution table or using statistical software, we find the critical value for a two-tailed test at a significance level of 0.05 (assuming equal variances) to be approximately 2.201.
Comparing the calculated t-value to the critical value, if the calculated t-value is greater than the critical value, we reject the null hypothesis; otherwise, we fail to reject the null hypothesis.
Therefore, by comparing the calculated t-value to the critical value, we can determine if there is a significant difference between the means of the two samples.
To know more about mean visit-
brainly.com/question/15405445
#SPJ11
Be A^2 = 1
and suppose A=I and
A =-1. (a) Show that the only eigenvalues of A are A = -I
(b) Show that A is diagonalizable.
A(A+1) = A +1, and that A(A – I) = -(A – I) and then look at the nonzero columns of A+1
and of A-I.
A has two linearly independent eigenvectors and is therefore diagonalizable.
(a)Eigenvalues of A are values λ such that the equation (A − λI) x = 0 has a nonzero solution x. If we use A = I,
then A − λ
I = I − λI
= (1 − λ)I and the equation (A − λI)
x = 0 is equivalent to (1 − λ)x = 0.
Thus λ = 1 is the only eigenvalue of A = I.
If we use A = −1, then A − λI = −1 − λI = (−1 − λ)I and
the equation (A − λI) x = 0 is equivalent to
(−1 − λ)x = 0.
Thus λ = −1 is the only eigenvalue of A = −1.
In both cases the only eigenvalue is A = −I.
(b)To show that A is diagonalizable, we need to show that A has a basis of eigenvectors.
For λ = −1, the equation (A + I) x = 0 is equivalent to
x1 + x2 + x3 = 0, which has a nonzero solution such as
x = (1, −1, 0).
For λ = 1, the equation (A − I) x = 0 is equivalent to
x1 − x2 + x3 = 0, which has a nonzero solution such as x = (1, 1, −2).
Thus A has two linearly independent eigenvectors and is therefore diagonalizable.
To learn more about vectors visit;
https://brainly.com/question/30958460
#SPJ11
Find the transfer functions of each of the following discrete-time systems, given that the system is initially in a quiescent state:
(a) Yk+2-3y+1 + 2yk = Uk
(b) YA+2-3y+1 +2y=U₁+U₂
(C) Yes=Yhz+2+y=1+1
To find the transfer functions of the given discrete-time systems, we need to determine the relationship between the input and output in the z-domain.
(a) System transfer function:
Y[k+2] - 3Y[k+1] + 2Y[k] = U[k]
To obtain the transfer function, let's take the Z-transform of both sides of the equation. Assuming zero initial conditions (quiescent state), the Z-transform of the equation is:
Z{Y[k+2]} - 3Z{Y[k+1]} + 2Z{Y[k]} = Z{U[k]}
Let's denote Y[z] as the Z-transform of Y[k] and U[z] as the Z-transform of U[k]. Using the Z-transform properties, we have:
[tex]z^2[/tex]Y[z] - zY[0] - zY[1] - 3zY[z] + 3Y[0] + 2Y[z] = U[z]
Now, rearranging the equation to solve for the transfer function H[z] = Y[z] / U[z]:
H[z] = Y[z] / U[z] = (U[z] + zY[0] + zY[1] - 3Y[0]) / ([tex]z^2[/tex] - 3z + 2)
The transfer function for system (a) is given by H[z] = (U[z] + zY[0] + zY[1] - 3Y[0]) / ([tex]z^2[/tex] - 3z + 2).
(b) System transfer function:
Y[A+2] - 3Y[A+1] + 2Y[A] = U[1] + U[2]
Similar to the previous case, let's take the Z-transform of both sides of the equation. Assuming zero initial conditions (quiescent state), the Z-transform of the equation is:
Z{Y[A+2]} - 3Z{Y[A+1]} + 2Z{Y[A]} = Z{U[1]} + Z{U[2]}
Denoting Y[z] as the Z-transform of Y[A] and U[z]₁, U[z]₂ as the Z-transforms of U[1], U[2] respectively, we have:
[tex]z^(A+2)[/tex]Y[z] - [tex]z^(A+1)[/tex]Y[0] - [tex]z^A[/tex]Y[1] - 3[tex]z^(A+1)[/tex]Y[z] + 3[tex]z^A[/tex]Y[0] + 2Y[z] = U[z]₁ + U[z]₂
Rearranging the equation to solve for the transfer function H[z] = Y[z] / (U[z]₁ + U[z]₂):
H[z] = Y[z] / (U[z]₁ + U[z]₂) = (U[z]₁ + U[z]₂ +[tex]z^(A+1)[/tex]Y[0] + [tex]z^A[/tex]Y[1] - 3[tex]z^A[/tex]Y[0]) / [tex](z^(A+2) - 3z^(A+1) + 2z^A)[/tex]
The transfer function for system (b) is given by H[z] = (U[z]₁ + U[z]₂ + [tex]z^(A+1)Y[0] + z^AY[1] - 3z^AY[0]) / (z^(A+2) - 3z^(A+1) + 2z^A).[/tex]
Learn more about Transfer function here:
https://brainly.com/question/31392726
#SPJ11
In a BIP problem, which of the following constraints will enforce a contingent relationship between project 1 and 2 such that project 1 can be accepted only if project 2 is also accepted (but project 2 could be accepted without project 1)?
Multiple Choice
x1 + x2 ≤ 1
x1 + x2 = 1
x1 ≤ x2
x2 ≤ x1
None of the answer choices is correct.
The correct choice is: None of the answer choices is correct as to properly capture the contingent relationship, we need to add an additional constraint beyond the given answer choices.
To enforce a contingent relationship between project 1 and project 2, where project 1 can be accepted only if project 2 is also accepted (but project 2 could be accepted without project 1), we need to introduce additional constraints that explicitly express this relationship.
The given answer choices do not capture this contingent relationship because they only include constraints that specify the relationship between the decision variables (x₁ and x₂) without considering the interdependency between the projects.
In order to enforce the contingent relationship, we would need to introduce a constraint that states that if project 1 is accepted (x₁ = 1), then project 2 must also be accepted (x₂ = 1).
To know more about contingent relationship,
https://brainly.com/question/32596034
#SPJ11
Solve the given equation for a. log102 + logıo(2 − 21) = 2 +log10( If there is more than one answer write them separated by commas. x=
Solve the given equation for a. log102 + logıo(2 − 21) = 2 +log10( If there is more than one answer write them separated by commas. x=
Solve the given equation for a. log102 + logıo(2 − 21) = 2 +log10( If there is more than one answer write them separated by commas. x=
The value of x in the logarithm is 4/2100
What is logarithm?A logarithm is a mathematical operation that determines how many times a certain number, called the base, is multiplied by itself to reach another number. It is the inverse function to exponentiation, meaning that the logarithm of a number x to the base b is the exponent to which b must be raised to produce x. Logarithms relate geometric progressions to arithmetic progressions, and examples are found throughout nature and art, such as the spacing of guitar frets, mineral hardness, and the intensities of sounds, stars, windstorms, earthquakes, and acids
The given logarithm is log₁₀2 + log₁₀(2 − 21) = 2 +log₁₀X
Taking the logarithm of the both sides we have
log[2/1 *2/21) = (100*X)]
4/21 = 100x/1
cross and multiply to have
4/2100 = 2100x/2100
x= 4/210
Learn more about logarithm on https://brainly.com/question/30226560
#SPJ4
Nine players on a baseball team are arranged in the batting order. What is the probability that the first two players in the lineup will be the center fielder and the shortstop, in that order?
Answer: The probability of the first player being the center fielder is 1 out of 9 because there is only one center fielder on the team.
After the center fielder is chosen, there are 8 players remaining, and the probability of the second player being the shortstop is 1 out of 8 because there is only one shortstop on the team.
To calculate the probability of both events occurring in order, we multiply the individual probabilities:
Probability = (1/9) * (1/8) = 1/72
Therefore, the probability that the first two players in the lineup will be the center fielder and the shortstop, in that order, is 1 out of 72.
Solve the below equation to find x. 0 x = 6, x=-12 O 0 x = 3 x = 3, x = -6 0 x = 3, x=-12 Clear my choice |2x + 9 = 15 .X
The solution to the equation 2x + 9 = 15 is x = 3.
What is the value of x in the equation 2x + 9 = 15?In the given linear equation, 2x + 9 = 15, we are tasked with finding the value of x that satisfies the equation. To solve it, we need to isolate the variable x on one side of the equation.
To begin, we subtract 9 from both sides of the equation, which gives us 2x = 15 - 9. Simplifying further, we have 2x = 6.
Next, to solve for x, we divide both sides of the equation by 2. This yields x = 6/2, which simplifies to x = 3.
Learn more about linear equation
brainly.com/question/12974594
#SPJ11
This question refers to the population growth problem in section 3.9 of the lecture notes. Suppose that bacteria growth is modelled by the DE given in the notes. Suppose that the number of bacteria is observed to double after 4 days, and the estimated carrying capacity is 19 times the initial population. What is the estimated population, as a multiple of the initial population, after 18 days? (For example an answer of 3.5 would indicate a population 3.5 times the initial population). Give the answer accurate to 2 decimal places. Number
The given differential equation is,dP/dt = kP (1 - P/19) Where k is the constant of proportionality and P is the population at any time t.
Let P0 be the initial population. Then, the given statement that the number of bacteria is observed to double after 4 days can be written as,P(4) = 2P0So, P0 = P(4)/2 = 500
Now, the carrying capacity is 19 times the initial population, which is 19P0 = 19 × 500 = 9500. So, P cannot exceed 9500.As the initial population is P0, and the doubling time is 4 days, the time required for P to become 8P0 is 3 × 4 = 12 days. Since P cannot exceed 9500, the population after 18 days would have stabilised to 19P0 or 9500 (whichever is less).Now we need to estimate P(18). At t = 18, the population is given by,P(18) = 19P0 / [1 + (18/5) * e^(-k*18)]Since P0 = 500, we have to estimate the value of k.
To find k, use P(4) = 2P0 and P(12) = 8P0 to get two equations in k.
Substituting P0 = 500 and solving, we get,k = 0.26622 approx 0.27Putting this in P(18), we get,P(18) = 19*500 / [1 + (18/5) * e^(-0.27*18)]P(18) ≈ 5638.76Thus, the estimated population as a multiple of the initial population after 18 days is 5638.76 / 500 ≈ 11.28 (accurate to two decimal places).Hence, the required answer is 11.28.
#SPJ11
https://brainly.com/question/32643516
To test the hypothesis that the population mean mu=6.0, a sample size n=15 yields a sample mean 6.346 and sample standard deviation 1.748. Calculate the P- value and choose the correct conclusion. Yanıtınız: O The P-value 0.383 is not significant and so does not strongly suggest that mu>6.0. O The P-value 0.383 is significant and so strongly suggests that mu>6.0. O The P-value 0.028 is not significant and so does not strongly suggest that mu>6.0. O The P-value 0.028 is significant and so strongly suggests that mu>6.0. O The P-value 0.016 is not significant and so does not strongly suggest that mu>6.0. O The P-value 0.016 is significant and so strongly suggests that mu>6.0. O The P-value 0.277 is not significant and so does not strongly suggest that mu>6.0. O The P-value 0.277 is significant and so strongly suggests that mu>6.0. O The P-value 0.228 is not significant and so does not strongly suggest that mu>6.0. O The P-value 0.228 is significant and so strongly suggests that mu>6.0.
The P-value 0.228 is not significant and so does not strongly suggest that mu > 6.0. Option 9
How to determine the correct conclusionFirst, calculate the p-value and compare it to the given significance level
The observed value (6.346) if the null hypothesis is true (mu = 6.0).
To calculate the p - value, we have;
t =[tex]\frac{mean - mu}{\frac{s}{\sqrt{n} } }[/tex]
Such that the parameters are;
s is the standard deviationn is the sample sizeSubstitute the values, we have;
= (6.346 - 6.0) / (1.748 /√15)
expand the bracket and find the square root, we have;
= 0.346 / 0.451
Divide the values
= 0.767
The degree of freedom is given as;
(n -1)= (15 -1 ) = 14
Then, we have that the p- value is 0.228.
The P-value 0.228 is not significant and so does not strongly suggest that mu > 6.0.
Learn more about standard deviation at: https://brainly.com/question/24298037
#SPJ4
Q3) [1T, 2A] Determine if vectors = [9,-6, 12] and w = [-12, 8,-16]. are collinear.
Given vectors = [9,-6, 12] and w = [-12, 8,-16]. In this case, we find that v = -3 * w, indicating that they are indeed collinear.
Collinear vectors are vectors that lie on the same line or are parallel to each other. If v and w are collinear, it means that one vector can be obtained by scaling the other vector by a constant factor. Mathematically, this can be represented as v = k * w, where k is a scalar.
In our case, we have v = [9, -6, 12] and w = [-12, 8, -16]. To check if they are collinear, we need to find a scalar k such that v = k * w. We can perform scalar multiplication on w by multiplying each component by k.
By comparing the corresponding components of v and k * w, we find that 9 = -12k, -6 = 8k, and 12 = -16k. Solving these equations, we find that k = -3 satisfies all of them. Therefore, we can write v as -3 times w, or v = -3 * w, confirming that v and w are collinear.
To learn more about vectors click here, brainly.com/question/24256726
#SPJ11
You want to obtain a sample to estimate a population proportion. Based on previous evidence, you believe the population proportion is approximately p∗=38%p∗=38%. You would like to be 99.9% confident that your esimate is within 1% of the true population proportion. How large of a sample size is required?
n =
You want to obtain a sample to estimate a population proportion. Based on previous evidence, you believe the population proportion is approximately p∗=27%p∗=27%. You would like to be 99.5% confident that your esimate is within 1.5% of the true population proportion. How large of a sample size is required?
n =
You are interested in estimating the the mean age of the citizens living in your community. In order to do this, you plan on constructing a confidence interval; however, you are not sure how many citizens should be included in the sample. If you want your sample estimate to be within 4 years of the actual mean with a confidence level of 96%, how many citizens should be included in your sample? Assume that the standard deviation of the ages of all the citizens in this community is 22 years.
Sample Size:
The sample size at 99.9% confidence is 25517
The sample size at 99.5% confidence is 6902
The sample size at 96% confidence is 127
How large of a sample size is required?99.9% confident within 1% of the true population proportion
The sample size can be calculated using
n = (z² * p * (1-p)) / E²
Where
z = 3.291 i.e. z-score at 99.9% CI
p = 0.38
E = 1% = 0.01
So, we have
n = (3.291² * 0.38 * (1-0.38)) / 0.01²
Evaluate
n = 25517
99.5% confident within 1.5% of the true population proportion
The sample size can be calculated using
n = (z² * p * (1-p)) / E²
Where
z = 2.807 i.e. z-score at 99.5% CI
p = 0.27
E = 1.5% = 0.015
So, we have
n = (2.807² * 0.27 * (1 - 0.27)) / 0.015²
Evaluate
n = 6902
96% confidence level
The sample size can be calculated using
n = (z² * σ²) / E²
Where
z = 2.05 i.e. z-score at 99.5% CI
σ = 22
E = 4
So, we have
n = (2.05² * 22²) /4²
Evaluate
n = 127
Hence, the sample size is 127
Read more about confidence level at
https://brainly.com/question/17097944
#SPJ4
for a one-tailed (upper tail) hypothesis test with a sample size of 18 and a .05 level of significance, the critical value of the test statistic t is
The critical-value of test statistic "t" for the given one-tailed hypothesis test with a sample size of 18 and a significance level of α = 0.05 is (c) 1.740.
To find the critical-value of the test-statistic "t" for a one-tailed (upper tail) hypothesis-test with a sample-size of 18 and a significance-level of α = 0.05, we use the given information :
Sample-Size (n) = 18
Significance level (α) = 0.05
Since it is a one-tailed (upper tail) test, we find the critical-value corresponding to a cumulative probability of 1 - α = 1 - 0.05 = 0.95.
The degrees of freedom (df) for a one-sample t-test with a sample size of 18 is calculated as (n - 1) = (18 - 1) = 17.
We know that, a 17 degrees-of-freedom and a cumulative probability of 0.95, the critical value of the test statistic "t" is approximately 1.740.
Therefore, the correct option is (c).
Learn more about Critical Value here
https://brainly.com/question/32450122
#SPJ4
The given question is incomplete, the complete question is
For a one-tailed (upper tail) hypothesis test with a sample size of 18 and α = 0.05 level of significance, the critical-value of the test statistic "t" is
(a) 2.110
(b) 1.645
(c) 1.740
(d) 1.734.
Use statistical tables to find the following values (i) fo 75,615 = (ii) X²0.975, 12--- (iii) t 09, 22 (iv) z 0.025 (v) fo.05.9, 10. (vi) kwhen n = 15, tolerance level is 99% and confidence level is 95% assuming two-sided tolerance interval
(i) The value of Fo for 75,615 is not provided in the question, and therefore cannot be determined.
(ii) The value of X²0.975, 12 is approximately 21.026.
(iii) The value of t0.9, 22 is approximately 1.717.
(iv) The value of z0.025 is approximately -1.96.
(v) The value of Fo.05, 9, 10 is not provided in the question, and therefore cannot be determined.
(vi) The value of k for a two-sided tolerance interval with a sample size of 15, a tolerance level of 99%, and a confidence level of 95% is not provided in the question, and therefore cannot be determined.
(i) The value of Fo for 75,615 is not given, and without additional information or a specific distribution, it is not possible to determine the corresponding value from statistical tables.
(ii) The value of X²0.975, 12 can be found using the chi-square distribution table. With a degree of freedom of 12 and a significance level of 0.025 (two-tailed test), we find that X²0.975, 12 is approximately 21.026.
(iii) The value of t0.9, 22 can be found using the t-distribution table. With a significance level of 0.1 and 22 degrees of freedom, we find that t0.9, 22 is approximately 1.717.
(iv) The value of z0.025 can be found using the standard normal distribution table. The significance level of 0.025 corresponds to a two-tailed test, so we need to find the value that leaves 0.025 in both tails. From the table, we find that z0.025 is approximately -1.96.
(v) The value of Fo.05, 9, 10 is not given in the question, and without additional information or a specific distribution, it is not possible to determine the corresponding value from statistical tables.
(vi) The value of k for a two-sided tolerance interval depends on the sample size, tolerance level, and confidence level. However, the specific values for these parameters are not provided in the question, making it impossible to determine the corresponding value of k from statistical tables.
learn more about statistics here:brainly.com/question/32201536
#SPJ11
Is there a statistically significant relationship between the 2 variables,pattern or direction and the strength
Do men and women differ in their views on capital punishment?
Men Women
Favor 67.3% 59.6%
Oppose 32.7% 40.4%
Value DF P value
Chi Square 13.758 1 .000
Based on the information provided, there is a statistically significant relationship between the two variables.
How to know if there is a statistically significant relationship between the two variables?The relationship between two variables and whether these variables are significant or not is often determined by the p-value. The general rule is that the p-value should be smaller than 0.05 for a variable to be considered significant.
In this case, the p-value is 0.0, which shows its value is smaller than 0.05 and therefore it is significant.
Learn more about variables in https://brainly.com/question/15078630
#SPJ4
The lengths of the diagonals of a rhombus are 16 and 30
Find the length of a side of the rhombus.
The length of one side of the rhombus is 17 units. It's worth noting that the length of a side can also be found by using either of the diagonals since they are both equal in a rhombus. However, in this case, we used the Pythagorean theorem to demonstrate the relationship between the diagonals and the sides
In a rhombus, the diagonals intersect at right angles and bisect each other. Let's denote the length of one side of the rhombus as "s."
The diagonals of the rhombus have lengths of 16 and 30 units. Let's label them as "d1" and "d2" respectively.
Since the diagonals bisect each other, they form four congruent right triangles within the rhombus. The sides of these right triangles are half the lengths of the diagonals. Therefore, we can set up the Pythagorean theorem for one of the right triangles:
[tex](d1/2)^2 + (d2/2)^2 = s^2[/tex]
Plugging in the values of the diagonals, we have:
[tex](16/2)^2 + (30/2)^2 = s^2[/tex]
[tex]8^2 + 15^2 = s^2[/tex]
[tex]64 + 225 = s^2[/tex]
[tex]289 = s^2[/tex]
Taking the square root of both sides, we find:
s = √289
s = 17
For more such questions on Pythagoras Theorem
https://brainly.com/question/343682
#SPJ8
"probability distribution
B=317
3) An electronic company produces keyboards for the computers whose life follows a normal distribution, with mean (150+ B) months and standard deviation (20 + B) months. If we choose a hard disc at random what is the probability that its lifetime will be
a. Less than 120 months?
b. More than 160 months?
c. Between 100 and 130 months?"
In this probability distribution problem, we are given that the lifetime of keyboards produced by an electronic company follows a normal distribution with a mean of (150 + B) months and a standard deviation of (20 + B) months.
We need to calculate the probability of the keyboard's lifetime being less than 120 months, more than 160 months, and between 100 and 130 months.
a) To find the probability that the keyboard's lifetime is less than 120 months, we can standardize the value using the z-score formula:
z = (x - μ) / σ
where x is the given value, μ is the mean, and σ is the standard deviation. By substituting the given values into the formula, we can calculate the corresponding z-score. Then, using a standard normal distribution table or software, we can find the probability associated with the calculated z-score.
b) To find the probability that the keyboard's lifetime is more than 160 months, we follow a similar process. We standardize the value using the z-score formula and calculate the corresponding z-score. Then, we find the area under the standard normal distribution curve beyond the calculated z-score to determine the probability.
c) To find the probability that the keyboard's lifetime is between 100 and 130 months, we calculate the z-scores for both values using the same formula. Then, we find the difference between the probabilities associated with the z-scores to determine the probability of the lifetime falling within the given range.
Learn more about mean here: brainly.com/question/31101410
#SPJ11
For the numbers 1716 and 936
a. Find the prime factor trees
b. Find the GCD
c. Find the LCM
For the numbers 1716 and 936
b. The GCD is 52.
c. The LCM is 8586.
a. Prime factor trees for 1716 and 936:
Prime factor tree for 1716:
1716
/ \
2 858
/ \
2 429
/ \
3 143
/ \
11 13
Prime factor tree for 936:
936
/ \
2 468
/ \
2 234
/ \
2 117
/ \
3 39
/ \
3 13
b. To find the greatest common divisor (GCD) of 1716 and 936, we identify the common prime factors and their minimum powers. From the prime factor trees, we can see that the common prime factors are 2, 3, and 13. Taking the minimum powers of these common prime factors:
GCD(1716, 936) = 2² × 3¹ × 13¹ = 52
c. To find the least common multiple (LCM) of 1716 and 936, we identify all the prime factors and their maximum powers. From the prime factor trees, we can see the prime factors of 1716 are 2, 3, 11, and 13, while the prime factors of 936 are 2, 3, and 13. Taking the maximum powers of these prime factors:
LCM(1716, 936) = 2² × 3¹ × 11¹ × 13¹ = 8586
Therefore, the GCD of 1716 and 936 is 52, and the LCM of 1716 and 936 is 8586.
To learn more about LCM: https://brainly.com/question/233244
#SPJ11
consider the compound beam shown in (figure 1). suppose that p1 = 840 n , p2 = 1150 n , w = 410 n/m , and point e is located just to the left of 840 n force. follow the sign convention.
Using the quadratic formula to solve quadratic equation, we ge.t L1 = 0.266 m and L2 = 1.23 m.
The compound beam shown in figure 1 is shown below:
Given:
p1 = 840
N p2 = 1150
Nw = 410 N/m.
Point e is located just to the left of 840 N force.
Force equilibrium: ΣFy = 0R1 + R2 = p1 + p2 + wL ----(1)
Moment equilibrium:ΣMy = 0
p1 (L1 + L2) + p2 L2 + wL²/2 = R2 L2 + R1 L1 ----(2)
Here, the length of the first span is L1, the length of the second span is L2, and the total length of the beam is L.
Since point e is located just to the left of 840 N force, it is the location where the first span meets the second span.
Therefore, L1 + e = L2 R1 = ? R2 = ?
Using equation (1),
R1 + R2 = p1 + p2 + wLR1 + R2
= 840 + 1150 + 410 * LR1 + R2
= 1990 + 410 LR2 - R1
= wL R2 - R1
= 410 L - R1
Substituting equation (5) into equation (4),
R1 + 410 L - R1 = 410 LR = 410 L/2R = 205 L.
Therefore, R1 = 205 L - 840 N and
R2 = 1150 + 205 L - 410 L= -255 L + 1150 N.
Now, substituting the values of R1 and R2 into equation (2),
P1 (L1 + L2) + P2 L2 + wL²/2
= (-255 L + 1150 N) L2 + (205 L - 840 N) L1840 (L1 + L2) + 1150 L2 + 410 L²/2
= -255 L³ + 1150 L² + 205 L² - 840 L1 + 840 L1 - 205 L² + 255 L³ 840 L1 + 1395 L² + 895 L - 410 L²/2
= 0L1 + 2.59 L² + 1.06 L - 0.48 = 0.
Using the quadratic formula to solve this quadratic equation, we get L1 = 0.266 m and L2 = 1.23 m.
To know more about quadratic visit:
https://brainly.com/question/22364785
#SPJ11
Many companies use well-known celebrities as spokespersons in their TV advertisements. A study was conducted to determine sample of 300 female TV viewers was asked to identify a product advertised by a celebrity spokesperson. The gender of the sp given below. Male Celebrity Female Celebrity Identified product 41 61 Could not identify 109 89 Which test would be used to properly analyze the data in this experiment? O A. Wilcoxon rank sum test for independent populations OB.X2 test for independence C. Kruskal-Wallis rank test OD. x2 test for differences among more than two proportions d to determine whether brand awareness of female TV viewers and the gender of the spokesperson are independent. Each in a nder of the spokesperson and whether or not the viewer could identify the product was recorded. The numbers in each category are
The proper way to analyze the data in this experiment would be the x2 test for independence.
The test that should be used to properly analyze the data in this experiment is the x2 test for independence.
A chi-square test is a statistical method that determines if two categorical variables are independent of one another.
The x2 test is used to determine if a relationship exists between two or more groups.
If the p-value is less than or equal to alpha, the researcher can reject the null hypothesis and conclude that the variables are linked.
On the other hand, if the p-value is more than alpha, the researcher fails to reject the null hypothesis.
Therefore, the proper way to analyze the data in this experiment would be the x2 test for independence.
Know more about chi-square test here:
https://brainly.com/question/4543358
#SPJ11
Determine whether the following expression is a vector, scalar or meaningless: (ả × ĉ) · (à × b) - (b + c). Explain fully
The given expression is not purely a vector or scalar but a combination of both. It is a meaningful expression, but it represents a combination of a scalar and a vector.
The given expression is:
(ả × ĉ) · (à × b) - (b + c)
To determine whether this expression is a vector, scalar, or meaningless, we need to examine the properties and definitions of vectors and scalars.
In the given expression, we have the cross product of two vectors: (ả × ĉ) and (à × b). The cross product of two vectors results in a new vector that is orthogonal (perpendicular) to both of the original vectors. The dot product of two vectors, on the other hand, yields a scalar quantity.
Let's break down the expression:
(ả × ĉ) · (à × b) - (b + c)
The cross product (ả × ĉ) results in a vector, and the cross product (à × b) also results in a vector. Therefore, the first part of the expression, (ả × ĉ) · (à × b), is a dot product between two vectors, which yields a scalar.
The second part of the expression, (b + c), is the sum of two vectors, which also results in a vector.
So overall, the expression consists of a scalar (from the dot product) subtracted from a vector (from the sum of vectors).
Therefore, the given expression is not purely a vector or scalar but a combination of both. It is a meaningful expression, but it represents a combination of a scalar and a vector.
To learn more about vector click here:
brainly.com/question/32068252
#SPJ11
PROBLEM!! HIGHLIGHTED IN YELLOW!!
Problem 23 Evaluate the indicated line integral using Green's Theorem. (a) ∮ F.dr
where F = (eˣ² - y, e²ˣ + y) and C is formed by y = 1-x² and y = 0. (b) ∮ [y³ -In(x + 1)] dx + (√y² + 1 + 3x) dy
where C is formed by x = y² and x = 4. (c) ∮ [y sec² x -2] dx + (tan x - 4y²)dy where C is formed by x = 1 - y² and x = 0.
Green's Theorem relates a line integral around a closed curve to a double integral over the region enclosed by the curve. It states that for a vector field F = (P, Q) and a curve C enclosing a region D.
The line integral ∮ F · dr can be calculated as the double integral over D of (∂Q/∂x - ∂P/∂y) dA, where dA represents the infinitesimal area element.To evaluate a line integral using Green's Theorem, we need to follow these steps:
Determine the vector field F = (P, Q).
Find the partial derivatives ∂P/∂y and ∂Q/∂x.
Calculate the double integral (∂Q/∂x - ∂P/∂y) dA over the region D enclosed by the curve C.
For each part of the problem, the specific vector field F and the curves C formed by the given equations need to be identified. Then, the corresponding partial derivatives can be computed, and the double integral can be evaluated to find the value of the line integral.
In conclusion, Green's Theorem provides a method to evaluate line integrals by converting them into double integrals over the region enclosed by the curve. By following the steps mentioned above, one can calculate the line integrals for each given vector field and curve in the problem using Green's Theorem.
To learn more about Green's Theorem click here : brainly.com/question/30763441
#SPJ11
A 200 gallon tank initially contains 100 gallons of water with 20 pounds of salt. A salt solution with 1/4 pound of salt per gallon is added to the tank of 4 gal/min, and resulting mixture is drained out at 2gal/min.
(a) Write a differential equation for Q(t) which is valid up until the point at which the tank overflows.
Q'(t) = __
(b) Find the quantity of salt in the tank as it's about to overflow.
The capacity of the tank (whether it overflows or not) and the specific time when it's about to overflow are not provided in the given question. Without these values, it is not possible to determine the quantity of salt in the tank as it's about to overflow.
To write a differential equation for Q(t), which represents the quantity of water in the tank at time t, we need to consider the rates at which water enters and leaves the tank.
The differential equation for Q(t) can be written as follows:Q'(t) = 4 - 2 This equation represents the net rate of change of water in the tank, which is the difference between the rate at which water is added and the rate at which it is drained out. Since the rate of water being added is 4 gallons per minute and the rate of water being drained out is 2 gallons per minute, the net rate of change is 4 - 2 = 2 gallons per minute.
To find the quantity of salt in the tank as it's about to overflow, we need to consider the initial quantity of salt and the rates at which salt enters and leaves the tank. Initially, the tank contains 20 pounds of salt. The salt solution being added to the tank has a concentration of 1/4 pound of salt per gallon. Since 4 gallons of solution are being added per minute, the rate at which salt enters the tank is (1/4) * 4 = 1 pound per minute.
To find the quantity of salt in the tank as it's about to overflow, we need to consider the time it takes for the tank to reach its capacity. However, the capacity of the tank (whether it overflows or not) and the specific time when it's about to overflow are not provided in the given question. Without these values, it is not possible to determine the quantity of salt in the tank as it's about to overflow.
Learn more about differential equation here: brainly.com/question/1183311
#SPJ11
1. You and friends go to the gym to play badminton. There are 4 courts, and only your group is waiting. Suppose each group on court plays an exponen- tial random time with mean 20 minutes. What is the probability that your group is the last to hit the shower?
The probability that your group is the last to hit the shower when playing badminton at the gym is given by the expression e^(-3t/20), where t represents the time in minutes.
Step 1: Understand the problem
You and your friends are at the gym playing badminton. There are 4 courts available, and only your group is waiting to play. Each group playing on a court has an exponential random time with a mean of 20 minutes. You want to calculate the probability that your group is the last to finish playing and hit the shower.
Step 2: Define the random variable
Let's define the random variable X as the time it takes for a group to finish playing on a court and hit the shower. Since X follows an exponential distribution with a mean of 20 minutes, we can denote it as X ~ Exp(1/20).
Step 3: Calculate the probability
The probability that your group is the last to hit the shower can be obtained by calculating the survival function of the exponential distribution. The survival function, denoted as S(t), gives the probability that X is greater than t.
In this case, we want to find the probability that all the other groups finish playing and leave before your group finishes. Since there are 3 other groups, the probability can be calculated as:
P(X > t)^3
where P(X > t) is the survival function of the exponential distribution.
Step 4: Calculate the survival function
The survival function of the exponential distribution is given by:
S(t) = e^(-λt)
where λ is the rate parameter, which is equal to 1/mean. In this case, the mean is 20 minutes, so λ = 1/20.
Step 5: Calculate the final probability
Now, we can substitute the values into the probability expression:
P(X > t)^3 = (e^(-t/20))^3 = e^(-3t/20)
This is the probability that all the other groups finish playing and leave before your group finishes.
To learn more about probability, click here: brainly.com/question/12594357
#SPJ11
Find an equation of the tangent plane to the graph of F(r, s) at the given point:
F(r, s) = 3 1/3^3 - 3r^2 1/s^05, (2, 1,-9)
z =
An equation of the tangent plane to the graph of F(r, s) at the given point above is z = -12r - 57s + 69.
Given the function F(r, s) = 3(1/3)^3 - 3r^2(1/s)^05. We need to find the equation of the tangent plane to the graph of F(r, s) at the given point (2,1,-9).
The formula to find the equation of the tangent plane at (a,b,c) to the surface z = f(x,y) is given by:
z - c = f x (a,b) (x - a) + f y (a,b) (y - b)
where f x and f y are the partial derivatives of the function f(x,y) with respect to x and y respectively.
So, here, we have, f(r,s) = 3(1/3)^3 - 3r^2(1/s)^05
Differentiating partially with respect to r, we get:
f r = -6r/s^05
Differentiating partially with respect to s, we get:f s = 9/s^6 - 15r^2/s^6
Substituting the values of (r,s) = (2,1) in f(r,s) and the partial derivatives f r and f s , we get:
f(2,1) = 3(1/3)^3 - 3(2)^2(1/1)^05= 3(1/27) - 12 = -11/3
f r (2,1) = -6(2)/1^05 = -12
f s (2,1) = 9/1^6 - 15(2)^2/1^6= -57
The equation of the tangent plane to the graph of F(r, s) at the point (2,1,-9) is given by:
z - (-9) = (-12)(r - 2) + (-57)(s - 1) => z = -12r - 57s + 69.
Hence, the required answer is z = -12r - 57s + 69.
Learn more about functions at:
https://brainly.com/question/31397815
#SPJ11
O Find the distance between the points (-2,-3) and (1,-7). Find the equation of the circle that has a radius of 5 and center (2,3). Find an equation of the line with slope and passing through the point (0,-3). - Find the equation of the line passing through the point (-1,-2) and parallel to the line passing through the points (0,0)and (3,5).
The equation of the line passing through the point (-1,-2) and parallel to the line passing through the points (0,0) and (3,5) is y = 2x.
1. Distance between points (-2,-3) and (1,-7)
To find the distance between two points in a Cartesian plane, we can use the distance formula:
d=√((x2-x1)²+(y2-y1)²)
Using the points (-2,-3) and (1,-7) in the distance formula,
d=√((1-(-2))²+(-7-(-3))²)=√(3²+(-4)²)=√(9+16)=√25=5
Therefore, the distance between the points (-2,-3) and (1,-7) is 5 units.
2. Equation of the circle with a radius of 5 and center (2,3)
The standard equation of a circle is:(x-h)² + (y-k)² = r²where (h,k) is the center of the circle and r is the radius.Substituting the given values, we have:
(x-2)² + (y-3)² = 5²
Expanding and simplifying the equation,(x-2)² + (y-3)² = 25x² - 4x + 4 + y² - 6y + 9 = 25x² + y² - 4x - 6y - 12 = 0
Therefore, the equation of the circle with a radius of 5 and center (2,3) is x² + y² - 4x - 6y - 12 = 0.3.
Equation of the line with slope and passing through the point (0,-3)
To find the equation of a line, we need the slope and a point that lies on the line.
We are given the point (0,-3) and the slope.
Let the slope be m and the equation of the line be y = mx + b.
Substituting the point (0,-3) and the slope into the equation, we have:-3 = m(0) + b-3 = b
Therefore, b = -3.
Substituting the slope and the y-intercept into the equation of the line, we have:
y = mx - 3Therefore, the equation of the line with slope and passing through the point (0,-3) is y = mx - 3.4.
Equation of the line passing through the point (-1,-2) and parallel to the line passing through the points (0,0) and (3,5)
To find the equation of a line parallel to a given line, we use the same slope as the given line.
Let the equation of the line be y = mx + b.
Substituting the point (-1,-2) into the equation and using the slope of the given line, we have:-
2 = m(-1) + bm+m = 0+m = 2
Substituting the slope and the y-intercept into the equation of the line, we have:y = 2x + b
To find the value of b, we substitute the point (-1,-2) into the equation of the line.-2 = 2(-1) + bb = 0
Substituting the value of b into the equation of the line, we have:y = 2x
Therefore, the equation of the line passing through the point (-1,-2) and parallel to the line passing through the points (0,0) and (3,5) is y = 2x.
To know more about Cartesian plane, visit:
https://brainly.com/question/32222840
#SPJ11
Use the following probability distribution to answer the following questions Pa) 0:14 0.1 16 18 5 0.09 0.67 Calculate the mean, Varance, and standard deviation of the distribution You may round your answers to two decimal places, il necessary What is the expected value of the distribution
The expected value of the distribution is 1.98.
Given probability distribution is, [tex]X 0 1 2 3 4 5[/tex]
Probability [tex](P(X)) 0.14 0.1 0.16 0.18 0.05 0.09 0.67(i) \\Mean (μ) \\= ∑xP(X)X P(X)0 0.14 1 0.1 2 0.16 3 0.18 4 0.05 5 0.09μ \\= ∑xP(X) \\= (0 × 0.14) + (1 × 0.1) + (2 × 0.16) + (3 × 0.18) + (4 × 0.05) + (5 × 0.09) \\= 1.98[/tex]
Therefore, the mean is 1.98.
(ii) Variance (σ2) [tex]= ∑ (x - μ)2P(X)x P(X)x - μP(X)(x - μ)2P(X)0 0 - 1.98 (-1.98)2 0.03842 1 0.1 - 1.98 (-0.98)2 0.08408 2 0.16 - 1.98 (-0.98)2 0.08408 3 0.18 - 1.98 (1.02)2 0.18612 4 0.05 - 1.98 (2.98)2 0.22322 5 0.09 - 1.98 (3.98)2 0.28326 σ2 = ∑ (x - μ)2P(X) \\= 0.03842 + 0.08408 + 0.08408 + 0.18612 + 0.22322 + 0.28326 \\= 0.89918[/tex]
Therefore, the variance is 0.89918.
(iii) Standard deviation
[tex](σ) = √σ2\\= √0.89918\\= 0.9482(approx)[/tex]
Therefore, the standard deviation is 0.9482 (approx).
(iv) Expected value [tex]= E(X) \\= ∑xP(X)x P(X)0 0.14 1 0.1 2 0.16 3 0.18 4 0.05 5 0.09E(X) \\= ∑xP(X) \\= (0 × 0.14) + (1 × 0.1) + (2 × 0.16) + (3 × 0.18) + (4 × 0.05) + (5 × 0.09) \\= 1.98[/tex]
Therefore, the expected value of the distribution is 1.98.
Know more about probability here:
https://brainly.com/question/25839839
#SPJ11
Could someone please help with these problems! Thanks so much!
Question 21 For any angle,sin+com²0- A) B) Not enough information. D) 0 Question 22" If tanz-1, then cot z A) 1 B) T C) 0 D) Cannot be determined. Question 23 Simplify (-3¹) A) B) C) D) 90 Question
A geometric shape known as an angle is created by two rays or line segments that meet at a location known as the vertex. The sides of the angle are the rays or line segments. Correct answer is b.
Angles are commonly expressed as radians (rad) or degrees (°).
For any angle,
sin²θ + cos²θ = 1.
sin²θ + cos²θ = 1 - cos²θ.
Therefore, sin²θ - cos²θ = 1 - 2cos²θ. Hence, the answer is (B).
Question 22: If tanz = 1, then z = 45°. Therefore,
cotz = cosz/sinz. When
sinz = 1/√2 and
cosz = 1/√2, then
cotz = 1. Hence, the answer is (A)
.Question 23: Simplify (-3¹). (-3¹) = -3. Therefore, the answer is (A). Thus, the answers for the given questions are- 21. B22. A23. A
To know more about Geometric Shape visit:
https://brainly.com/question/24088263
#SPJ11
Create an orthogonal basis for the vector space spanned by B. b. From your answer to part a, create an orthonormal basis for this vector space.
a) To create an orthogonal basis for the vector space spanned by B, we will use the Gram-Schmidt process. The vectors in B are already linearly independent. So, we can create an orthogonal basis for the space spanned by B using the following steps:
i) First, we normalize the first vector in B to obtain a unit vector v1.
v1 = [3/7, -2/7, 6/7]ii) Then, we calculate the projection of the second vector in B, w2, onto v1 as follows:w2_perp = w2 - proj_v1(w2), where proj_v1(w2) = ((w2 . v1)/||v1||^2)v1= [-1/2, 1/2, 0]w2_perp = [1/2, -5/2, -6]iii) Next, we normalize w2_perp to obtain a unit vector v2. v2 = w2_perp/||w2_perp||= [1/√35, -5/√35, -3/√35]So, an orthogonal basis for the vector space spanned by B is {v1, v2} = {[3/7, -2/7, 6/7], [1/√35, -5/√35, -3/√35]}b) To create an orthonormal basis for this vector space, we simply normalize the orthogonal basis vectors from part a.
So, the orthonormal basis for the vector space spanned by B is {u1, u2} = {[3/√49, -2/√49, 6/√49], [1/√35, -5/√35, -3/√35]} = {[3/7, -2/7, 6/7], [1/√35, -5/√35, -3/√35]}
To know more about orthogonal visit:
https://brainly.com/question/32196772
#SPJ11
A random sample of size 15 is taken from a normally distributed population revealed a sample mean of 75 and a standard deviation of 5. The upper limit of a 95% confidence interval for the population mean would equal?
The upper limit of the 95% confidence interval for the population mean is approximately 77.768.
What is confidence interval?The mean of your estimate plus and minus the range of that estimate makes up a confidence interval. Within a specific level of confidence, this is the range of values you anticipate your estimate to fall within if you repeat the test. In statistics, confidence is another word for probability.
To calculate the upper limit of a 95% confidence interval for the population mean, we can use the formula:
Upper Limit = Sample Mean + (Critical Value * Standard Error)
First, we need to determine the critical value for a 95% confidence interval. Since the sample size is 15 and the population is assumed to be normally distributed, we can use a t-distribution. The degrees of freedom for a sample of size 15 is 15 - 1 = 14.
Looking up the critical value for a 95% confidence level and 14 degrees of freedom in the t-distribution table, we find it to be approximately 2.145.
Next, we need to calculate the standard error, which is the standard deviation of the sample divided by the square root of the sample size:
Standard Error = Standard Deviation / √(Sample Size)
= 5 / √15
≈ 1.290
Finally, we can calculate the upper limit:
Upper Limit = Sample Mean + (Critical Value * Standard Error)
= 75 + (2.145 * 1.290)
≈ 75 + 2.768
≈ 77.768
Therefore, the upper limit of the 95% confidence interval for the population mean is approximately 77.768.
Learn more about confidence interval on:
brainly.com/question/17034620
#SPJ4