The acceleration vector is (0, 2 m/s²), the velocity vector is (8 m/s, 4 + 2t m/s), and the position vector is (8t m, (4t + t²) m).
Let's break down the problem into horizontal (x) and vertical (y) components. Since the ball is bouncing directly west, the initial velocity in the x-direction is 8 m/s, and there is no acceleration in this direction.
For the y-direction, we need to consider the angle of elevation and the wind's acceleration. The initial vertical velocity can be found by decomposing the initial velocity. Given that the angle of elevation is 30 degrees, the initial vertical velocity is 8 m/s * sin(30) = 4 m/s.
The acceleration in the y-direction is due to the wind and is given as 2 m/s², directed northward. Therefore, the acceleration vector is (0, 2).
To find the velocity vector, we integrate the acceleration vector with respect to time. The velocity vector is (8, 4 + 2t), where t represents time.
Finally, to determine where the ball lands, we need to find the time it takes for the ball to reach the ground. Since the ball is initially on the ground, the y-coordinate of the position vector will be zero when the ball lands. By setting the y-coordinate to zero and solving for time, we can find the time at which the ball lands. Once we have the time, we can substitute it back into the x-coordinate of the position vector to determine the landing position.
Learn more about vectors here:
https://brainly.com/question/24256726
#SPJ11
In a partially destroyed laboratory record of an analysis of correlation data, the following results only are legible: Variance of X=9, Regression lines: 8X-10Y+66=0, 40X-18Y=214. What was the correlation co-efficient between X and Y?
We need to determine the correlation coefficient between variables X and Y. The variance of X is known to be 9, and the regression lines for X and Y are provided as 8X - 10Y + 66 = 0 and 40X - 18Y = 214, respectively.
To find the correlation coefficient between X and Y, we can use the formula for the slope of the regression line. The slope is given by the ratio of the covariance of X and Y to the variance of X. In this case, we have the regression line 8X - 10Y + 66 = 0, which implies that the slope of the regression line is 8/10 = 0.8.
Since the slope of the regression line is equal to the correlation coefficient multiplied by the standard deviation of Y divided by the standard deviation of X, we can write the equation as 0.8 = ρ * σY / σX.
Given that the variance of X is 9, we can calculate the standard deviation of X as √9 = 3.
By rearranging the equation, we have ρ = (0.8 * σX) / σY.
However, the standard deviation of Y is not provided, so we cannot determine the correlation coefficient without additional information.
Learn more about correlation coefficient here:
https://brainly.com/question/29978658
#SPJ11
can
you please help me solve this equation step by step
Calculate -3+3i. Give your answer in a + bi form. Round your coefficien to the nearest hundredth, if necessary.
The solution to the equation `-3 + 3i` in a + bi form is:`-3 + 3i = -3 + 3i` (Already in a + bi form)
To solve the equation `-3 + 3i`, you can arrange the terms in a + bi form, where a is the real part, and b is the imaginary part. Therefore,-3 + 3i can be written as `a + bi`. To find a, use the real part, which is `-3`. To find b, use the imaginary part, which is `3i`.So, `a = -3` and `b = 3i`.
Therefore, the equation can be written as:-3 + 3i = -3 + 3i
We can also write this equation in a + bi form by combining like terms. Since `3i` is the only imaginary term, we can rewrite the equation as:-3 + 3i = (0 + 3i) - 3
Now that we have a + bi form, we can see that the real part is -3, and the imaginary part is 3.
More on a + bi form equations: https://brainly.com/question/17476481
#SPJ11
Case Processing Summary N % 57.5 42.5 Cases Valid 46 Excluded 34 Total 80 a. Listwise deletion based on all variables in the procedure. 100.0 Reliability Statistics Cronbach's Alpha Based on Cronbach's Standardized Alpha Items N of Items 1.066E-5 .921 170 Summary Item Statistics Mean Maximum / Minimum Minimum Maximum Range Variance N of Items Item Means 5121989.583 .174 870729891.3 870729891.1 5006696875 4.460E+15 170
The given information provides a summary of case processing and reliability statistics. Let's break down the information and explain its meaning:
Case Processing Summary:
Total cases: 80
Cases valid: 46
Cases excluded: 34
This summary indicates that out of the total 80 cases, 46 cases were considered valid for analysis, while 34 cases were excluded for some reason (e.g., missing data, outliers).
Reliability Statistics:
Cronbach's Alpha: 1.066E-5 (very close to zero)
Based on Cronbach's standardized alpha: .921
Number of items: 170
Reliability statistics are used to measure the internal consistency of a set of items in a questionnaire or scale. The Cronbach's Alpha coefficient ranges from 0 to 1, with higher values indicating greater internal consistency. In this case, the Cronbach's Alpha is extremely low (1.066E-5), suggesting very poor internal consistency among the items. However, the Cronbach's standardized alpha is .921, which is relatively high and indicates a good level of internal consistency. It's important to note that the two coefficients are different measures and can yield different results.
Item Statistics:
Mean: 5121989.583
[tex]\text{Maximum/Minimum}: \frac{870729891.3}{870729891.1}[/tex]
Range: 5006696875
Variance: 4.460E+15
Number of items: 170
These statistics describe the properties of the individual items in the analysis. The mean value indicates the average score across all items. The maximum and minimum values show the highest and lowest scores recorded among the items. The range is the difference between the maximum and minimum values. The variance provides a measure of the dispersion or spread of the item scores.
To know more about Value visit-
brainly.com/question/30760879
#SPJ11
Tutorial Exercise Use Newton's method to find the coordinates, correct to six decimal places, of the point on the parabola y = (x - 6)² that is closest to the origin.
The coordinates of the point on the parabola y = (x - 6)² that is closest to the origin, correct to six decimal places, are approximately (2.437935, 14.218164).
Starting with x_0 = 1, we will iteratively apply Newton's method:
D(x) = √(x² + ((x - 6)²)²)
D'(x) = (1/2) * (x² + ((x - 6)²)²)^(-1/2) * (2x + 4(x - 6)³)
x_1 = x_0 - (D(x_0) / D'(x_0))
= 1 - (√(1² + ((1 - 6)²)²) / ((1/2) * (1² + ((1 - 6)²)²)^(-1/2) * (2(1) + 4(1 - 6)³)))
≈ 2.222222
The difference |x_1 - x_0| ≈ 1.222222 is greater than the desired tolerance, so we continue iterating:
x_2 = x_1 - (D(x_1) / D'(x_1))
≈ 2.424972
The difference |x_2 - x_1| ≈ 0.20275 is still greater than the desired tolerance, so we continue:
x_3 = x_2 - (D(x_2) / D'(x_2))
≈ 2.437935
The difference |x_3 - x_2| ≈ 0.012963 is now smaller than the desired tolerance. We can consider this as our final approximation of the x-coordinate.
To find the corresponding y-coordinate, substitute the final value of x into the equation y = (x - 6)²:
y ≈ (2.437935 - 6)²
≈ 14.218164
Therefore, the coordinates of the point on the parabola y = (x - 6)² that is closest to the origin, correct to six decimal places, are approximately (2.437935, 14.218164).
To know more about parabola, click here: brainly.com/question/29267743
#SPJ11
Using the Ratio test, determine whether the series converges or diverges: [10] PR √(2n)! n=1 Q4 Using appropriate Tests, check the convergence of the series, [15] Σεπ (+1) 2p n=1 Q5 If 0(z)= y"
To determine whether a series converges or diverges, we can use various convergence tests. In this case, the ratio test and the alternating series test are used to analyze the convergence of the given series. The ratio test is applied to the series involving the factorial expression, while the alternating series test is used for the series involving alternating signs. These tests provide insights into the behavior of the series and whether it converges or diverges.
Q4: To check the convergence of the series Σ √(2n)! / n, we can apply the ratio test. According to the ratio test, if the limit of the absolute value of the ratio of consecutive terms is less than 1, the series converges.
Using the ratio test, we take the limit as n approaches infinity of |aₙ₊₁ / aₙ|, where aₙ represents the nth term of the series. In this case, aₙ = √(2n)! / n. Simplifying the ratio, we get |(√(2(n+1))! / (n+1)) / (√(2n)! / n)|.
Simplifying further and taking the limit, we find that the limit is 0. Since the limit is less than 1, the series converges.
Q5: To check the convergence of the series Σ (-1)^(2p) / n, we can use the alternating series test. This test applies to series that alternate signs. According to the alternating series test, if the terms of an alternating series decrease in absolute value and approach zero, the series converges.
In this case, the series Σ (-1)^(2p) / n alternates signs and the absolute value of the terms approaches zero as n increases. Therefore, we can conclude that the series converges.
It's important to note that these convergence tests provide insights into the convergence or divergence of a series, but they do not provide information about the exact value of the sum if the series converges.
Learn more about convergence tests here:
https://brainly.com/question/30784350
#SPJ11
For each scenario below, find the matching growth or decay model, f(t).
The concentration of pollutants in a lake is initially 100 ppm. The concentration decays by 30% every 3 years. 1
The concentration of pollutants in a lake is initially 100 ppm. The concentration B. decays by 70% every 3 years.
100 bacteria begin a colony in a petri dish. The bacteria increase by 30% every 3 hours.
100 bacteria begin a colony in a petri dish. The bacteria increase by 200% every half hour.
The cost of producing high end shoes is currently $100. The cost is increasing by 50% every two years.
$100 million dollars is invested in a compound interest account. The interest rate is 5%, compounded every half a year.
a. The decay model can be represented as f(t) = 100 * (0.7)^(t/3)
b. The decay model can be represented as f(t) = 100 * (0.3)^(t/3)
c. The growth model can be represented as f(t) = 100 * (3)^(2t)
d. The growth model can be represented as f(t) = 100 * (3)^(2t)
e. The growth model can be represented as f(t) = 100 * (1.5)^(t/2)
f. The growth model can be represented as f(t) = 100 * (1 + 0.05/2)^(2t)
Let's find the matching growth or decay models for each scenario:
a. The concentration of pollutants in a lake is initially 100 ppm. The concentration decays by 30% every 3 years.
The decay model can be represented as:
f(t) = 100 * (0.7)^(t/3)
where t is the time in years.
b. The concentration of pollutants in a lake is initially 100 ppm. The concentration decays by 70% every 3 years.
The decay model can be represented as:
f(t) = 100 * (0.3)^(t/3)
where t is the time in years.
c. The 100 bacteria begin a colony in a petri dish. The bacteria increase by 30% every 3 hours.
The growth model can be represented as:
f(t) = 100 * (1.3)^(t/3)
where t is the time in hours.
d. The 100 bacteria begin a colony in a petri dish. The bacteria increase by 200% every half an hour.
The growth model can be represented as:
f(t) = 100 * (3)^(2t)
where t is the time in half hours.
e. The cost of producing high-end shoes is currently $100. The cost is increasing by 50% every two years.
The growth model can be represented as:
f(t) = 100 * (1.5)^(t/2)
where t is the time in years.
f. The $100 million dollars is invested in a compound interest account. The interest rate is 5%, compounded every half a year.
The growth model can be represented as:
f(t) = 100 * (1 + 0.05/2)^(2t)
where t is the time in half years.
These models provide an approximation of the growth or decay process based on the given scenarios.
Learn more about model at https://brainly.com/question/32447656
#SPJ11
Find the dual of following linear programming problem
max 2x1 - 3 x2
subject to 4x1 + x2 < 8
4x1 - 5x2 > 9
2x1 - 6x2 = 7
X1, X2 ≥ 0
The dual of the linear problem is
Min 8y₁ + 9x₂ + 7y₃
Subject to:
4y₁ + 4y₂ + 2y₃ ≥ 2
y₁ + 5y₂ - 6y₃ ≥ -3
y₁ + y₂ + y₃ ≥ 0
How to calculate the dual of the linear problemFrom the question, we have the following parameters that can be used in our computation:
Max 2x₁ - 3x₂
Subject to:
4x₁ + x₂ < 8
4x₁ - 5x₂ > 9
2x₁ - 6x₂ = 7
x₁, x₂ ≥ 0
Convert to equations using additional variables, we have
Max 2x₁ - 3x₂
Subject to:
4x₁ + x₂ + s₁ = 8
4x₁ - 5x₂ + s₂ = 9
2x₁ - 6x₂ + s₃ = 7
x₁, x₂ ≥ 0
Take the inverse of the expressions using 8, 9 and 7 as the objective function
So, we have
Min 8y₁ + 9x₂ + 7y₃
Subject to:
4y₁ + 4y₂ + 2y₃ ≥ 2
y₁ + 5y₂ - 6y₃ ≥ -3
y₁ + y₂ + y₃ ≥ 0
Read more about linear programming at
https://brainly.com/question/14309521
#SPJ4
Identify the surfaces of the following equations by converting them into equations in the Cartesian form. Show your complete solutions. (a) z² = 4 + 4r²
z²/4 = 1 + x² + y²/1. This is the equation of a elliptic paraboloid with a vertex at (0,0,0) and axis of symmetry along the z-axis
To convert the equation z² = 4 + 4r² into Cartesian form, we can use the substitution:
x = r cosθ
y = r sinθ
z = z
Using this substitution, we can rewrite the equation as:
z² = 4 + 4x² + 4y²
Dividing both sides by 4, we get:
z²/4 = 1 + x² + y²/1
This is the equation of a elliptic paraboloid with a vertex at (0,0,0) and axis of symmetry along the z-axis. The surface opens upward along the z-axis and downward along the xy-plane.
Visit here to learn more about Cartesian form brainly.com/question/27927590
#SPJ11
Let u = [1, 3, -2,0] and v= [-1,2,0,3] ¹. (a) Find | uand || v ||. (b) Find the angel between u and v. (c) Find the projection of the vector w = [2.2,1,3] onto the plane that is spanned by u and v.
(a) The magnitudes of vectors u and v are 3.742 and 3.606 respectively. (b) The angle between vectors u and v is 1.107 radians. (c) The projection of vector w onto the plane spanned by vectors u and v is [2.667, 1.333, -0.667, 1].
(a) The magnitude of a vector is calculated by taking the square root of the sum of the squares of its components. Thus, ||u|| = √(1^2 + 3^2 + (-2)^2 + 0^2) = √14, and ||v|| = √((-1)^2 + 2^2 + 0^2 + 3^2) = √14.
(b) The angle between two vectors u and v can be determined using the dot product formula: cosθ = (u · v) / (||u|| ||v||). In this case, (u · v) = (1 * -1) + (3 * 2) + (-2 * 0) + (0 * 3) = 1 + 6 + 0 + 0 = 7. Therefore, θ = arccos(7 / (√14 * √14)) = arccos(7 / 14) = arccos(0.5) = 60°.
(c) The projection of a vector w onto the plane spanned by u and v can be found using the formula projᵤᵥ(w) = [(w · u) / (u · u)] * u + [(w · v) / (v · v)] * v. Substitute the given values to obtain projᵤᵥ(w) = [(2.2 * 1) / (1^2 + 3^2 + (-2)^2 + 0^2)] * [1, 3, -2, 0] + [(2.2 * -1) / ((-1)^2 + 2^2 + 0^2 + 3^2)] * [-1, 2, 0, 3].
To know more about vector here: brainly.com/question/24256726
#SPJ11
3. Find the general solution y(x of the following second order linear ODEs: ay+2y-8y=0 by"+2y+y=0 cy+2y+10y=0 (dy"+25y'=0 ey"+25y=0
(a) The general solution for the ODE ay + 2y - 8y = 0 is[tex]y(x) = C_{1} e^{4x/a} + C_{2}e^{-2x/a}[/tex]
(b) The general solution for the ODE y" + 2y + y = 0 is [tex]y(x) = (C_{1} + C_{2} x)e^{-x}[/tex]
(c) The general solution for the ODE cy + 2y + 10y = 0 is[tex]y(x) = C_{1}e^{-3x/cos(\sqrt{39x} /c)} + C_{2}e^{3x/cos(\sqrt{39x}/c)}[/tex]
(d) The general solution for the ODE dy" + 25y' = 0 is[tex]y(x) = C_1+ C_{2}e^{-25x/d}[/tex]
(e) The general solution for the ODE ey" + 25y = 0 is [tex]y(x) = C_1sin(5\sqrt{e})x + C_2cos(5\sqrt{e})x[/tex]
To find the general solution of a second-order linear ODE, we need to solve the characteristic equation and use the roots to construct the general solution.
(a) For the ODE ay + 2y - 8y = 0, the characteristic equation is [tex]ar^2 + 2r - 8 = 0[/tex]. Solving this quadratic equation, we find the roots r₁ = 2/a and r₂ = -4/a. The general solution is [tex]y(x) = C_{1} e^{4x/a} + C_{2}e^{-2x/a}[/tex], where C₁ and C₂ are arbitrary constants.
(b) For the ODE y" + 2y + y = 0, the characteristic equation is r^2 + 2r + 1 = 0. The roots are r₁ = r₂ = -1. The general solution is [tex]y(x) = (C_{1} + C_{2} x)e^{-x}[/tex] , where C₁ and C₂ are arbitrary constants.
(c) For the ODE cy + 2y + 10y = 0, the characteristic equation is cr^2 + 2r + 10 = 0. Solving this quadratic equation, we find the roots r₁ = (-1 + √39i)/c and r₂ = (-1 - √39i)/c. The general solution is y(x) = [tex]y(x) = C_{1}e^{-3x/cos(\sqrt{39x} /c)} + C_{2}e^{3x/cos(\sqrt{39x}/c)}[/tex], where C₁ and C₂ are arbitrary constants.
(d) For the ODE dy" + 25y' = 0, we can rewrite it as r^2 + 25r = 0. The roots are r₁ = 0 and r₂ = -25/d. The general solution is[tex]y(x) = C_1+ C_{2}e^{-25x/d}[/tex], where C₁ and C₂ are arbitrary constants.
(e) For the ODE ey" + 25y = 0, the characteristic equation is er^2 + 25 = 0. Solving this quadratic equation, we find the roots r₁ = 5i√e and r₂ = -5i√e. The general solution is y(x) = C₁
Learn more about arbitrary constants here:
https://brainly.com/question/17225511
#SPJ11
If y = y(x) is the solution of the initial-value problem y" +2y' +5y = 0, y (0) = y'(0) = 1, then ling y(x)=
a) does not exist
(b) [infinity]
(c) 1
(d) 0
(e) None of the above
The correct answer is (e) None of the above. The given initial-value problem is a second-order linear homogeneous differential equation.
To solve this equation, we can use the characteristic equation method.
The characteristic equation associated with the differential equation is r² + 2r + 5 = 0. Solving this quadratic equation, we find that the roots are complex numbers: r = -1 ± 2i.
Since the roots are complex, the general solution of the differential equation will involve complex exponential functions. Let's assume the solution has the form y(x) = e^(mx), where m is a complex constant.
Substituting this assumed solution into the differential equation, we have (m² + 2m + 5)e^(mx) = 0. For this equation to hold true for all values of x, the exponential term e^(mx) must be nonzero for any value of m. Therefore, the coefficient (m² + 2m + 5) must be zero.
Solving the equation m² + 2m + 5 = 0 for m, we find that the roots are complex: m = -1 ± 2i.
Since the roots are complex, we have two linearly independent solutions of the form e^(-x)cos(2x) and e^(-x)sin(2x). These solutions involve both real and imaginary parts.
Now, let's apply the initial conditions y(0) = 1 and y'(0) = 1 to find the specific solution. Plugging in x = 0, we have:
y(0) = e^(-0)cos(0) + 1 = 1,
y'(0) = -e^(-0)sin(0) + 2e^(-0)cos(0) = 1.
Simplifying these equations, we get:
1 + 1 = 1,
0 + 2 = 1.
These equations are contradictory and cannot be satisfied simultaneously. Therefore, there is no solution to the given initial-value problem.
To know more about coefficient click here
brainly.com/question/30524977
#SPJ11
Consider the several variable function f defined by f(x, y, z) = x² + y² + z² + 2xyz.
(a) [8 marks] Calculate the gradient Vf(x, y, z) of f(x, y, z) and find all the critical points of the function f(x, y, z).
(b) [8 marks] Calculate the Hessian matrix Hf(x, y, z) of f(x, y, z) and evaluate it at the critical points which you have found in (a).
(c) [14 marks] Use the Hessian matrices in (b) to determine whether f(x, y, z) has a local minimum, a local maximum or a saddle at the critical points which you have found in
(a) To calculte the gradient
Vf(x, y, z) of f(x, y, z)
, we take the partial derivatives of f with respect to each variable and set them equal to zero to find the critical points.
(b) The Hessian matrix
Hf(x, y, z)
is obtained by taking the second-order partial derivatives of f(x, y, z). We evaluate the Hessian matrix at the critical points found in part (a).
(c) Using the Hessian matrices from part (b), we analyze the eigenvalues of each matrix to determine the nature of the critical points as either local minimum, local maximum, or saddle points.
(a) The gradient Vf(x, y, z) of f(x, y, z) is calculated by taking the partial derivatives of f with respect to each variable:
Vf(x, y, z) = ⟨∂f/∂x, ∂f/∂y, ∂f/∂z⟩
.
To find the critical points, we set each partial derivative equal to zero and solve the resulting system of equations.
(b) The Hessian matrix Hf(x, y, z) is obtained by taking the second-order partial derivatives of f(x, y, z):
Hf(x, y, z) = [[∂²f/∂x², ∂²f/∂x∂y, ∂²f/∂x∂z], [∂²f/∂y∂x, ∂²f/∂y², ∂²f/∂y∂z], [∂²f/∂z∂x, ∂²f/∂z∂y, ∂²f/∂z²]].
We evaluate the Hessian matrix at the critical points found in part (a) by substituting the values of x, y, and z into the corresponding second-order partial derivatives.
(c) To determine the nature of the critical points, we analyze the eigenvalues of each Hessian matrix. If all eigenvalues are positive, the point corresponds to a local minimum. If all eigenvalues are negative, it is a local maximum. If there are both positive and negative eigenvalues, it is a saddle point.
By examining the eigenvalues of the Hessian matrices evaluated at the critical points, we can classify each critical point as either a local minimum, local maximum, or saddle point.
To learn more about
Variable Function
brainly.com/question/27863354
#SPJ11
Given the matrix -1 4 1
-1 1 -1
1 -3 0 (a) does the inverse of the matrix exist? Your answer is (input Yes or No): (b) if your answer is Yes, write the inverse as
a11 a12 a13
a21 a22 a23
a31 a32 a33
find
a11= -3
a12= -1
a13= -5
a21= 1
a22= -1
a23= 3
a31= 2
a32= -1
a33= 3
the inverse of the given matrix is:
-3 -1 -5
1 -1 3
2 -1 3
(a) The inverse of a matrix exists if its determinant is non-zero. To determine if the inverse of the given matrix exists, we need to calculate its determinant.
The given matrix is:
-1 4 1
-1 1 -1
1 -3 0
To calculate the determinant, we can use the formula for a 3x3 matrix:
[tex]det(A) = a11(a22a33 - a23a32) - a12(a21a33 - a23a31) + a13(a21a32 - a22a31)[/tex]
Plugging in the values from the given matrix, we get:
[tex]det(A) = (-1)((1)(0) - (-1)(-3)) - (4)((-1)(0) - (-1)(1)) + (1)((-1)(-3) - (1)(1))[/tex]
[tex]= (-1)(3) - (4)(1) + (1)(2)[/tex]
= -3 - 4 + 2
= -5
The determinant of the matrix is -5.
Since the determinant is non-zero (not equal to zero), the inverse of the matrix exists.
Therefore, the answer is: Yes.
(b) If the inverse of the matrix exists, we can find it by applying the formula:
[tex]A^{-1} = (1/det(A)) * adj(A)[/tex]
Where adj(A) is the adjugate of matrix A, obtained by finding the transpose of the cofactor matrix.
Using the values provided:
a11 = -3, a12 = -1, a13 = -5,
a21 = 1, a22 = -1, a23 = 3,
a31 = 2, a32 = -1, a33 = 3,
We can form the inverse matrix as:
-3 -1 -5
1 -1 3
2 -1 3
To know more about matrix visit:
brainly.com/question/29132693
#SPJ11
There are several things to take care of here. First, you need to complete the square s² + 4s + 8 = (s + 2)² +4 Next, you will need the following from you table of Laplace transforms L^-1 {s/s^2+a^2} = cosat; L^-1 {s/s^2+a^2} = sinat; L^-1 {F(s-c)} = eºf(t)
To solve the differential equation (s² + 4s + 8)Y(s) = X(s), we can complete the square in the denominator: s² + 4s + 8 = (s + 2)² + 4.
Using the Laplace transform properties, we can apply the following results from the table of Laplace transforms:
L^-1 {s/(s² + a²)} = cos(at)
L^-1 {a/(s² + a²)} = sin(at)
L^-1 {F(s-c)} = e^(ct)f(t)
Applying these transforms to our equation, we have:
Y(s) = X(s) / [(s + 2)² + 4]
Taking the inverse Laplace transform, we obtain the solution in the time domain:
y(t) = L^-1 {Y(s)} = L^-1 {X(s) / [(s + 2)² + 4]}
The specific form of the inverse Laplace transform will depend on the given X(s) in the problem.
To learn more about Laplace - brainly.com/question/30404106
#SPJ11
A researcher studied more than 12,000 people over a 32-year period to examine if people's chances of becoming obese are related to whether they have friends and family who become obese. They reported that a person's chance of becoming obese increased by 50% (90% confidence interval [CI], 77 to 128) if he or she had a friend who became obese in a given interval. Explain what the 90% confidence interval reported in this study means to a person who understands hypothesis testing with the mean of a sample of more than one, but who has never heard of confidence intervals.
To understand the 90% confidence interval reported in this study, it's important to first understand the concept of hypothesis testing. In hypothesis testing, we compare sample data to a null hypothesis to determine whether there is a statistically significant effect or relationship.
However, in this study, instead of conducting hypothesis testing, the researchers calculated a confidence interval. A confidence interval provides a range of values within which we can be reasonably confident that the true population parameter lies. In this case, the researchers calculated a 90% confidence interval for the increase in a person's chance of becoming obese if they had a friend who became obese.
The reported 90% confidence interval of 77 to 128 means that, based on the data collected from over 12,000 people over a 32-year period, we can be 90% confident that the true increase in a person's chance of becoming obese, when they have a friend who becomes obese, falls within this range.
More specifically, it means that if we were to repeat the study multiple times and calculate 90% confidence intervals from each sample, approximately 90% of those intervals would contain the true increase in the chances of becoming obese.
In this case, the researchers found that the point estimate of the increase was 50%, but the confidence interval ranged from 77% to 128%. This indicates that the true increase in the chances of becoming obese, when a person has an obese friend, is likely to be higher than the point estimate of 50%.
Overall, the 90% confidence interval provides a range of values within which we can reasonably estimate the true increase in the chances of becoming obese based on the study's data, with a 90% level of confidence.
Learn more about hypothesis testing here:
brainly.com/question/27671270
#SPJ11
1. For the cumulative distribution function of a discrete random variable X, namely Fx(-), if Fx(a) = 1, for all values of b (b> a), Fx(b) = 1. A. True B. False
2. For the probability mass function of a discrete random variable X, namely pX(-), 0≤ px (x) ≤1 holds no matter what value xx takes. A. True B. False
The statement is false. If Fx(a) = 1, it does not imply that Fx(b) = 1 for all values of b (b > a).
The statement is true. The probability mass function of a discrete random variable X, pX(x), always satisfies 0 ≤ pX(x) ≤ 1, regardless of the value of x.
The statement falsely claims that if Fx(a) = 1, then Fx(b) = 1 for all b > a in the cumulative distribution function (CDF) of a random variable X. However, the CDF can increase in steps and may not reach 1 for all values beyond a. Thus, the correct answer is B. False.
The probability mass function (PMF), pX(-), provides the probability for a discrete random variable X taking on a specific value. The statement is true, as 0 ≤ pX(x) ≤ 1 always holds for any value of x. Probabilities are bounded between 0 and 1, so the probability for any value that X can take will fall within this range. Thus, the correct answer is A. True.
Learn more about CDF here:
brainly.com/question/30402457
#SPJ11
1. Show that if a series ml fn(x) converges uniformly to a function f on two different subsets A and B of R, then the series converges uniformly on AUB. =1
If a series ml fn(x) converges uniformly to a function f on two different subsets A and B of R, then the series converges uniformly on AUB.
To show that the series ml fn(x) converges uniformly on the union of subsets A and B, we can consider the definition of uniform convergence.
Uniform convergence means that for any positive ε, there exists a positive integer N such that for all x in A and B, and for all n greater than or equal to N, the difference between the partial sum Sn(x) and the function f(x) is less than ε.
Since the series ml fn(x) converges uniformly on subset A, there exists a positive integer N1 such that for all x in A and for all n greater than or equal to N1, |Sn(x) - f(x)| < ε.
Similarly, since the series ml fn(x) converges uniformly on subset B, there exists a positive integer N2 such that for all x in B and for all n greater than or equal to N2, |Sn(x) - f(x)| < ε.
Now, let N be the maximum of N1 and N2. For all x in AUB, the series ml fn(x) converges uniformly since for all n greater than or equal to N, we have |Sn(x) - f(x)| < ε, regardless of whether x is in A or B.
Therefore, we have shown that if the series ml fn(x) converges uniformly on subsets A and B, it also converges uniformly on their union, AUB.
Learn more about convergence
brainly.com/question/29258536
#SPJ11
A data set of 5 observations for Concession Sales per person (S) at a theater and Minutes before the movie begins results in the following estimated regression model. Complete parts a through c below Sales 48+0.194 Minutes a) A 50% prediction interval for a concessions customer 10 minutes before the movie starts is ($5 80,57 68) Explain how to interpret this interval Choose the correct answer below OA. There is a 90% chance that the mean amount spent by customers at the concession stand 10 minutes before the movie starts is between $5.00 and $7.68 OB. 90% of the 5 observed customers 10 minutes before the movie starts can be expected to spend between $5 80 and $7.68 at the concession stand OC. 90% of all customers spend between $5.00 and $7.68 at the concession stand OD 50% of customers 10 minutes before the movie starts can be expected to spend between $5.80 and $7 68 at the concession stand b) A 90% confidence interval for the mean of sales per person 10 minutes before the movie starts is ($6 27.57.21) Explain how to interpret this interval Choose the corect answer below. OA. It can be stated with 90% confidence that the average amount spent by the 5 observed customers at the concession stand 10 minutes before the movie starts is between $6 27 and 57.21 OB. 90% of all concessions customers 10 minutes before the movie starts will spend between $6 27 and $7.21 on average OC. It can be stated with 50% confidence that the sample mean of the amount spent at the concession stand 10 minutes before the movie starts is between 56 27 and $7.21 OD. R can be stated with 90% confidence that the mean amount spent by customers at the concession stand 10 minutes before the movie starts is between $6 27 and $7.21 c) Which interval is of particular interest to the concessions manager? Which one is of particular interest to you, the moviegoer? OA. The concessions manager is probably more interested in the typical size of a sale. As an individual moviegoer, you are probably more interested in estimating the mean sales OB. The concessions manager is probably more interested in estimating the mean sales. As an individual moviegoer, you are probably more interested in the typical size of a sale OC. There is no difference between the two intervals
An individual moviegoer is more concerned with the typical size of a sale. Therefore, option B is the correct answer.
a) The 50% prediction interval for a concessions customer 10 minutes before the movie starts is ($5.80, $7.68).
A 50% prediction interval for a concessions customer 10 minutes before the movie starts is between $5.80 and $7.68.
It means that if we took a random sample of customers who are buying from the concession stand 10 minutes before the movie starts, 50% of them are expected to spend between $5.80 and $7.68.
Therefore, we can conclude that option D, 50% of customers 10 minutes before the movie starts can be expected to spend between $5.80 and $7.68 at the concession stand, is the correct answer.
b) The 90% confidence interval for the mean of sales per person 10 minutes before the movie starts is ($6.27, $7.21).
A 90% confidence interval for the mean of sales per person 10 minutes before the movie starts is between $6.27 and $7.21.
It means that we are 90% confident that the true mean amount spent by the customers at the concession stand 10 minutes before the movie starts is between $6.27 and $7.21.
Therefore, option A, It can be stated with 90% confidence that the average amount spent by the 5 observed customers at the concession stand 10 minutes before the movie starts is between $6.27 and $7.21, is the correct answer.
c) The interval of particular interest to the concessions manager is option B, The concessions manager is probably more interested in estimating the mean sales.
As an individual moviegoer, you are probably more interested in the typical size of a sale. The mean of sales per person 10 minutes before the movie starts is of more interest to the concessions manager. On the other hand, an individual moviegoer is more concerned with the typical size of a sale.
Therefore, option B is the correct answer.
To learn more about concessions visit;
https://brainly.com/question/31217187
#SPJ11
Please show all steps and if using identities of any kind please
be explicit... I really want to understand what is going on here
and my professor is useless.
2. Ordinary least squares to implement ridge regression: Show that by using X = X | XI (pxp) [0 (PX₁)], we have T T BLS= ÂLs = (X¹X)-¹Ỹ¹ỹ = Bridge. =
Ridge regression is a statistical technique for analyzing data that deals with multicollinearity issues.
Ridge regression was created to address the multicollinearity issue in ordinary least squares regression by including a penalty term that restricts the coefficient estimates, resulting in a less-variance model.
By using the notation X = X | XI (pxp) [0 (PX₁)], we have the transpose of the ordinary least squares coefficient estimate as BLS = (X'X)^-1X'y = Bridge.
Ridge regression can be implemented by using ordinary least squares to estimate the parameters of the regression equation. In Ridge regression, we have to add an L2 regularization term, which is controlled by a hyperparameter λ, to the sum of squared residuals term in the ordinary least squares regression equation.
The ridge regression coefficients can be computed by solving the following equation:
B_Ridge = (X'X + λI)^-1X'y
Where X is the matrix of predictors, y is the response variable vector, λ is the penalty term, and I is the identity matrix.
In Ridge regression, we add an L2 penalty term (λ||B||2) to the sum of squared residuals term (||y - X'B||2) of the ordinary least squares regression equation. This results in a new equation: ||y - X'B||2 + λ||B||2, where λ >= 0. To minimize this equation, we differentiate it with respect to B and set it equal to zero. This gives us the following equation:
2X'(y - X'B) + 2λB = 0
Simplifying further, we get:
(X'X + λI)B = X'y
So the Ridge regression coefficients can be computed by solving this equation as given above. By using the notation X = X | XI (pxp) [0 (PX₁)], we can get the coefficients for Ridge regression using Ordinary least squares.
To learn more about regression, refer below:
https://brainly.com/question/32505018
#SPJ11
A normal distribution has a mean, v = 100, and a standard deviation, equal to 10. the P(X>75) = a. 0.00135 b. 0.00621 c. 0.4938 d 0.9938
The correct answer is b) 0.00621. To find the probability P(X > 75) in a normal distribution with a mean of 100 and a standard deviation of 10, we need to calculate the z-score and then find the corresponding probability.
The z-score formula is given by:
z = (x - μ) / σ
where x is the value we want to find the probability for (in this case, 75), μ is the mean (100), and σ is the standard deviation (10).
Plugging in the values:
z = (75 - 100) / 10
z = -25 / 10
z = -2.5
To find the probability P (X > 75), we need to find the area under the curve to the right of the z-score -2.5.
Using a standard normal distribution table or a calculator, we can find that the probability corresponding to a z-score of -2.5 is approximately 0.00621.
Therefore, the correct answer is b) 0.00621.
To know more about deviation visit-
brainly.com/question/12325156
#SPJ11
Evaluate ¹∫₋₁ 1 / x² dx. O 0
O 1/3 O 2/3 O The integral diverges.
What is the volume of the solid of revolution generated by rotating the area bounded by y = √ sinx, the x-axis, x = π/4, around the x-axis?
O 0 units³
O π units³
O π units³
O 2π units³
The integral of 1 / x² from -1 to 1 is 0. The volume of the solid of revolution is approximately π + 1/√2 units³.
The first integral evaluates to 0 because it represents the area under the curve of the function 1 / x² between -1 and 1.
However, the function has a singularity at x = 0, which means the integral is not defined at that point.
For the second part, we want to find the volume of the solid formed by rotating the area bounded by y = √sin(x), the x-axis, and x = π/4 around the x-axis.
By applying the formula for the volume of a solid of revolution and evaluating the integral, we find that the volume is approximately π + 1/√2 units³.
Learn more about Integeral click here :brainly.com/question/17433118
#SPJ11
What is the sum of the following telescoping series? (2n + 1) Σ(-1)"+1. n=1 n(n+1) A) 1 B) O C) -1 (D) 2 E R
The sum of the given telescoping series is -1.It is calculated as given below steps. There are few steps.
Let's expand the series and observe the pattern to find the sum. The given series is expressed as (2n + 1) Σ(-1)^n / (n(n+1)), where the summation symbol represents the sum of the terms.
Expanding the series, we have:
(2(1) + 1)(-1)^1 / (1(1+1)) + (2(2) + 1)(-1)^2 / (2(2+1)) + (2(3) + 1)(-1)^3 / (3(3+1)) + ...
Simplifying the terms, we get:
3/2 - 6/6 + 9/12 - 12/20 + ...Notice that the terms cancel out in a specific pattern. The numerator of each term is a perfect square (n^2) and the denominator is the product of n and (n+1).
In this case, we can rewrite the series as:
Σ((-1)^n / 2n), where n starts from 1.
Now, observe that the terms alternate between positive and negative. When n is even, (-1)^n is positive, and when n is odd, (-1)^n is negative. As a result, all the terms cancel out each other, except for the first term.
Therefore, the sum of the series is -1.
Learn more about sum of series here
https://brainly.com/question/31328219
#SPJ11
Let f (x) and g(x) be irreducible polynomials over a field F and let a and b belong to some extension E of F. If a is a zero of f (x) and b is a zero of g(x), show that f (x) is irreducible over F(b) if and only if g(x) is irreducible over F(a).
f(x) is irreducible over F(b) if and only if g(x) will be irreducible over F(a).
To prove that if a is a zero of the irreducible polynomial f(x) over a field F, and b is a zero of the irreducible polynomial g(x) over F, then f(x) is irreducible over F(b) if and only if g(x) is irreducible over F(a), we can use the concept of field extensions and the fact that irreducibility is preserved under field extensions.
First, assume that f(x) is irreducible over F(b). We want to show that g(x) is irreducible over F(a). Suppose g(x) is reducible over F(a), meaning it can be factored into g(x) = h(x)k(x) for some non-constant polynomials h(x) and k(x) in F(a)[x]. Since g(b) = 0, both h(b) and k(b) must be zero as well. This implies that b is a common zero of h(x) and k(x).
Since F(b) is an extension of F, and b is a zero of both g(x) and h(x), it follows that F(a) is a subfield of F(b). Now, considering f(x) over F(b), if f(x) were reducible, it would imply that f(x) could be factored into f(x) = p(x)q(x) for some non-constant polynomials p(x) and q(x) in F(b)[x].
However, this would contradict the assumption that f(x) is irreducible over F(b). Therefore, g(x) must be irreducible over F(a).
Therefore, f(x) is irreducible over F(b) if and only if g(x) is irreducible over F(a).
To know more about irreducibility, refer here :
https://brainly.com/question/32701513#
#SPJ11
Given the three point masses below and their positions relative to the origin in the xy-plane, find the center of mass of the system (units are in cm).
m₁ = 4 kg, placed at (−2,−1)
m₂ = 6 kg, placed at (6, -8)
m3 = 14 kg, placed at (-8, -10)
Give your answer as an ordered pair without units. For example, if the center of mass was (2 cm,1/2 cm), you would enter (2,1/2). Provide your answer below:
The center of mass of the system is (-7/2, -8).
To find the center of mass of the system, we need to calculate the weighted average of the positions of the point masses, where the weights are given by the masses.
Let's denote the center of mass as (x_cm, y_cm). The x-coordinate of the center of mass is given by:
x_ cm = (m₁ * x₁ + m₂ * x₂ + m₃ * x₃) / (m₁ + m₂ + m₃),
where m₁, m₂, and m₃ are the masses and x₁, x₂, and x₃ are the x-coordinates of the point masses.
Substituting the given values:
x_ cm = (4 * (-2) + 6 * 6 + 14 * (-8)) / (4 + 6 + 14),
x_ cm = (-8 + 36 - 112) / 24,
x_ cm = -84 / 24,
x_ cm = -7/2.
Similarly, the y-coordinate of the center of mass is given by:
y_ cm = (m₁ * y₁ + m₂ * y₂ + m₃ * y₃) / (m₁ + m₂ + m₃),
where y₁, y₂, and y₃ are the y-coordinates of the point masses.
Substituting the given values:
y_ cm = (4 * (-1) + 6 * (-8) + 14 * (-10)) / (4 + 6 + 14),
y_ cm = (-4 - 48 - 140) / 24,
y_ cm = -192 / 24,
y_ cm = -8.
Therefore, the center of mass of the system is (-7/2, -8).
To learn more about centre click here:
brainly.com/question/31379853
#SPJ11
Verify that the function y = 10 sin(4x) + 25 cos(4x) + 1 is a solution to the equation d²y/dx² +16y= 16.
The function y = 10 · sin 4x + 25 · cos 4x + 1 is a solution to differential equation d²y / dx² +16y= 16.
How to prove that an equation is a solution to a differential equation
Differential equations are expressions that involves functions and its derivatives, a function is a solution to a differential equation when an equivalence exists (i.e. 3 = 3).
In this question we need to prove that function y = 10 · sin 4x + 25 · cos 4x + 1 is a solution to d²y / dx² +16y= 16. First, find the first and second derivatives of the function:
dy / dx = 40 · cos 4x - 100 · sin 4x
dy² / dx² = - 160 · sin 4x - 400 · cos 4x
Second, substitute on the differential equation:
- 160 · sin 4x - 400 · cos 4x + 16 · (10 · sin 4x + 25 · cos 4x + 1) = 16
- 160 · sin 4x - 400 · cos 4x + 160 · sin 4x + 400 · cos 4x + 16 = 16
16 = 16
To learn more on differential equations: https://brainly.com/question/32538700
#SPJ4
Consider the function.
(x)=3√x
(a) Compute the slope of the secant lines from (0,0) to (x, (x)) for, x=1, 0.1, 0.01, 0.001, 0.0001.
(Use decimal notation. Give your answer to five decimal places.)
For x=1:
For x=0.1:
For x=0.01:
For x=0.001:
For x=0.0001:
(b) Select the correct statement about the tangent line.
The tangent line does not exist.
The tangent line will be vertical because the slopes of the secant lines increase.
There is not enough information to draw a conclusion.
The tangent line is horizontal.
(c) Plot the graph of and verify your observation from part (b).
f(x)=
(a) To compute the slope of the secant lines from (0,0) to (x, f(x)), where f(x) = 3√x, we can use the formula for slope:
Slope = (f(x) - f(0)) / (x - 0)
For x = 1:
Slope = (f(1) - f(0)) / (1 - 0) = (3√1 - 3√0) / 1 = 3√1 - 0 = 3(1) = 3
For x = 0.1:
Slope = (f(0.1) - f(0)) / (0.1 - 0) = (3√0.1 - 3√0) / 0.1 ≈ (3(0.46416) - 3(0)) / 0.1 ≈ 0.39223 / 0.1 ≈ 3.9223
For x = 0.01:
Slope = (f(0.01) - f(0)) / (0.01 - 0) = (3√0.01 - 3√0) / 0.01 ≈ (3(0.21544) - 3(0)) / 0.01 ≈ 0.64632 / 0.01 ≈ 64.632
For x = 0.001:
Slope = (f(0.001) - f(0)) / (0.001 - 0) = (3√0.001 - 3√0) / 0.001 ≈ (3(0.0631) - 3(0)) / 0.001 ≈ 0.1893 / 0.001 ≈ 189.3
For x = 0.0001:
Slope = (f(0.0001) - f(0)) / (0.0001 - 0) = (3√0.0001 - 3√0) / 0.0001 ≈ (3(0.02154) - 3(0)) / 0.0001 ≈ 0.06462 / 0.0001 ≈ 646.2
Therefore, the slopes of the secant lines from (0,0) to (x, f(x)) for the given values of x are:
For x=1: 3
For x=0.1: 3.9223
For x=0.01: 64.632
For x=0.001: 189.3
For x=0.0001: 646.2
(b) The correct statement about the tangent line can be deduced from the behavior of the secant line slopes. As the values of x decrease towards 0, the slopes of the secant lines are increasing. This indicates that the tangent line, if it exists, would become steeper as x approaches 0. However, without further information, we cannot conclude whether the tangent line exists or not.
(c) The graph of the function f(x) = 3√x can be plotted to visually verify our observation from part (b). Since the function involves taking the cube root of x, it will start at the origin (0,0) and gradually increase. As x approaches 0, the function will approach the x-axis, becoming steeper. If we zoom in near x=0, we can observe that the tangent line will indeed be a vertical line .
To learn more about secant lines click here : brainly.com/question/31334026
#SPJ11
The pressure P (in kilopascals), volume V (in liters), and temperature T (in kelvins) of a mole of an ideal gas are related by the equation PV=8.31. Find the rate at which the volume is changing when the temperature is 305 K and increasing at a rate of 0.15 K per second and the pressure is 17 and increasing at a rate of 0.02 kPa per second?
To find the rate at which the volume is changing, we can use the equation PV = 8.31, which relates pressure (P) and volume (V) of an ideal gas. By differentiating the equation with respect to time and using the given values of temperature (T) and its rate of change, as well as the pressure (P) and its rate of change, we can calculate the rate of change of volume.
The equation PV = 8.31 represents the relationship between pressure (P) and volume (V) of an ideal gas. To find the rate at which the volume is changing, we need to differentiate this equation with respect to time:
P(dV/dt) + V(dP/dt) = 0
Given that the temperature (T) is 305 K and increasing at a rate of 0.15 K/s, and the pressure (P) is 17 kPa and increasing at a rate of 0.02 kPa/s, we can substitute these values and their rates of change into the equation. Since we are interested in finding the rate at which the volume is changing, we need to solve for (dV/dt):
17(dV/dt) + 305(dP/dt) = 0
Substituting the given rates of change, we have:
17(dV/dt) + 305(0.02) = 0
Simplifying the equation, we can solve for (dV/dt) to find the rate at which the volume is changing.
To learn more about rates of change, click here:
brainly.com/question/29181502
#SPJ11
Please help!! This is a Sin Geometry question
The value of sine θ in the right triangle is (√5)/5.
What is the value of sin(θ)?Using one of the 6 trigonometric ratio:
sine = opposite / hypotenuse
From the figure:
Angle = θ
Adjacent to angle θ = 10
Hypotenuse = 5√5
Opposite = ?
First, we determine the measure of the opposite side to angle θ using the pythagorean theorem:
(Opposite)² = (5√5)² - 10²
(Opposite)² = 125 - 100
(Opposite)² = 25
Opposite = √25
Opposite = 5
Now, we find the value of sin(θ):
sin(θ) = opposite / hypotenuse
sin(θ) = 5/(5√5)
Rationalize the denominator:
sin(θ) = 5/(5√5) × (5√5)/(5√5)
sin(θ) = (25√5)/125
sin(θ) = (√5)/5
Therefore, the value of sin(θ) is (√5)/5.
Option D) (√5)/5 is the correct answer.
Learn more about Pythagorean theorem here: brainly.com/question/3436821
#SPJ1
don't use graph of function
when check
5. Define f.Z-Z by f(x)=xx.Check f for one-to-one and onto.
Let f be the function from the set of integers Z to Z, defined by f(x) = x^x. The task is to determine if the function is a one-to-one and onto mapping.
For a function to be one-to-one, the function must pass the horizontal line test, which states that each horizontal line intersects the graph of a one-to-one function at most once. To determine if f is a one-to-one function, assume that f(a) = f(b). Then, a^a = b^b. Taking the logarithm base a on both sides, we obtain: a log a = b log b. Dividing both sides by ab, we have: log a / a = log b / b.If we apply calculus techniques to the function g(x) = log(x) / x, we can find that the function is decreasing when x is greater than e and increasing when x is less than e. Therefore, if a > b > e or a < b < e, we have g(a) > g(b) or g(a) < g(b), which implies a^a ≠ b^b. Thus, f is a one-to-one function. To show that f is an onto function, consider any integer y ∈ Z. Then, y = f(y^(1/y)), so f is onto.
Therefore, the function f is both one-to-one and onto.
To learn more about one-to-one function visit:
brainly.com/question/29256659
#SPJ11
To test the hypothesis that the population standard deviation sigma=8.2, a sample size n=18 yields a sample standard deviation 7.629. Calculate the P- value and choose the correct conclusion. Your answer: T
If to test the hypothesis that the population standard deviation sigma=8.2. There is strong evidence to suggest that the population standard deviation is not equal to 8.2.
What is the P-value?We need to perform a hypothesis test using the given information.
Null hypothesis (H0): σ = 8.2
Alternative hypothesis (H1): σ ≠ 8.2
The test statistic can be calculated using the formula:
χ² = (n - 1) * (s² / σ²)
where:
n = sample size
s = sample standard deviation
σ = hypothesized population standard deviation.
Plugging in the values:
χ² = (18 - 1) * (7.629² / 8.2²) ≈ 16.588
Using statistical software or a chi-square distribution table, the p-value associated with χ² = 16.588 and 17 degrees of freedom is less than 0.001.
Since the p-value is less than the commonly chosen significance level (such as 0.05 or 0.01) we reject the null hypothesis.
Therefore based on the given sample there is strong evidence to suggest that the population standard deviation is not equal to 8.2.
Learn more about P-value here:https://brainly.com/question/13786078
#SPJ4